Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹77.5 L
EMD Value
₹1.6 L
Closing Date
15 Sept 2023, 10:30 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Rural Drinking Water and Sanitation Department
Vidhya Shree
Providing FHTC to 249 households of Honnalaganadoddi, Shivarudrappana Doddy and Ankappanadoddy/Providing FHTC to 200 households of Hulugondanahalli/Providing FHTC to 16 households of Chikkamuthayana Doddy and Thimmegowdana Doddy Habitation in Kolliganahalli Grama Panchayat in Kanakapura taluk, Ramanagara District through SVS
RWSSD/2023-24/WS/WORK_INDENT3709
RWSSD/2023-24/WS/WORK_INDENT3709
Open
Water supply/sewage lines
Two Tender Document System(Two Cover)
RWSSD Division Office Ramanagaar
14 documents required · 14 mandatory
To qualify for award of this contract, each Tenderer in its name should have in the last five years 2018-19 to 2022-23 satisfactorily completed at least 90 Percent of the contract value, as prime contractor, at least One Water supply project of value not less than 50Percent of the estimated cost of amount put to tender Note Successful completion certificate shall be submitted which ought to be issued by an officer not below the rank of Executive Engineer
To qualify for award of this contract, each Tenderer in its name should have in the last five years 2018-19 to 2022-23 Executed in any one Finacial Year,the minimum quantities of work Usually 50Percent of the peak annual rate of construction.Note the quantity could be in one or more contracts. However it has to be in one financial year
Total value of civl engineering works executed and payments received in the last five years (year-wise)
PRED/PWD CLASS III & ABOVE REGISTRATION LICENCE COPY MUST UPLOAD
Tenderer who meet the specified minimum qualifying criteria, will only be qualified, if their available tender capacity is more than total tender value.
To qualify for award of this contract, each Tenderer in its name should have in the last five years 2018-19 to 2022-23 Achieved in at least two financial years a minimum financial turnover In all classes of civil engineering construction works only of One times the estimated cost of amount put to tender. Income Tax Returns Filed, Audited statement, Profit & Loss Statement, Balance Sheet certified by the ICAI registered Chartered Accountant must be submitted for the relevant years along with compulsory UDIN Id No. Note Annual turnover for the past five/relevant financial years should be certified by an ICAI registered Chartered Accountant. The certificate should be affixed with the seal of the office of the Chartered Accountant with the registration number legible
liquid assets and /or availability of credit facilities of not less than 30Percent of the estimated cost of amount put to tender Credit lines/ letter of credit/ certificates from banks for meeting the fund requirement etc & shall submit the certificate in the prescribed format only issued by Nationalised/Scheduled Bank for the particular work.As Per ANNEXURE-II
Reports on the financial standing of the tenderer, such as profit and loss statements and auditors reports for the last five years
All Rates are excluding GST, Contractor should quote without GST & it will paid seperately
The statements showing the value of existing commitments and on-going works as well as the stipulated period of completion remaining for each of the works listed should be countersigned by the Engineer in charge, not below the rank of Executive Engineer or equivalent
List of works for which tenders already submitted
Litigation details of the bidder and tied firm with the details of the parties concerned and the amount involved should be furnished in Annexure-III
The Bidder Should Declare Clearely wheather the bidder has not been black listed / banned / debarred by any Central/ State / UT Government Department or Undertaking / Organization should be furnished in Annexure-IV
The Copy of the PAN card with GSTIN Registration Certificate.
Each of the documents uploaded to the e-portal should be self-attested by the contractor or an authorized representative in case of firm/company and notary certified.
₹1,940
₹1.6 L
23 Aug 2023
23 Aug 2023
18 Sept 2023
30 Aug 2023
Providing FHTC to 249 households of Honnalaganadoddi, Shivarudrappana Doddy and Ankappanadoddy/Providing FHTC to 200 households of Hulugondanahalli/Providing FHTC to 16 households of Chikkamuthayana Doddy and Thimmegowdana Doddy Habitation in Kolliganahalli Grama Panchayat in Kanakapura taluk, Ramanagara District through SVS
Cutting of road surface for pipeline trenches and disposing of the excavated stuff as directed including barricading, danger lighting etc. in the following classification. CC Road
Earth work excavation for pipelines/cables by Manual means upto 600 mm trench width, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights...
Earth work excavation for pipeline trenches in all kinds of soils by mechanical means above 600 mm trench width as per drawing and technical specifications, including setting out, construction of shor...
Earth work excavation for pipeline trenches in all kinds of soils by mechanical means above 600 mm trench width as per drawing and technical specifications, including setting out, construction of shor...
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...
Refilling available earth around trenches/pipelines, cables in layers not exceeding 20 cms in depth, compacting each deposited layer by ramming after watering with a lead upto 50 m , and lift upto 1.5...
Supplying HDPE pipes conforming to IS 4984:1995 with latest amendments and conveying to work site including loading and unloading at both destination and rolling, lowering into trenches, laying true t...
Supplying HDPE pipes conforming to IS 4984:1995 with latest amendments and conveying to work site including loading and unloading at both destination and rolling, lowering into trenches, laying true t...
Supplying HDPE pipes conforming to IS 4984:1995 with latest amendments and conveying to work site including loading and unloading at both destination and rolling, lowering into trenches, laying true t...
Supplying HDPE pipes conforming to IS 4984:1995 with latest amendments and conveying to work site including loading and unloading at both destination and rolling, lowering into trenches, laying true t...
Supplying HDPE pipes conforming to IS 4984:1995 with latest amendments and conveying to work site including loading and unloading at both destination and rolling, lowering into trenches, laying true t...
Supply and delivery at site of brand new Electrofusion Coupler as per IS 8360 -1977 with latest amendments 63mm dia
Supply and delivery at site of brand new Electrofusion Coupler as per IS 8360 -1977 with latest amendments 75mm dia
Supply and delivery at site of brand new Electrofusion Coupler as per IS 8360 -1977 with latest amendments 90mm dia
Supply and delivery at site of brand new Electrofusion TEE as per IS 8360 -1977 with latest amendmen 63mm dia
Supply and delivery at site of brand new Electrofusion TEE as per IS 8360 -1977 with latest amendmen 75mm dia
Supply and delivery at site of brand new Electrofusion TEE as per IS 8360 -1977 with latest amendmen 90mm dia
Supply and delivery at site of brand new Electrofusion Elbow as per IS 8360 -1977 with latest amendments 63mm dia
Supply and delivery at site of brand new Electrofusion Elbow as per IS 8360 -1977 with latest amendments 75mm dia
Supply and delivery at site of brand new Electrofusion Elbow as per IS 8360 -1977 with latest amendments 90mm dia
Supply and delivery at site of brand new Electrofusion Reducer as per IS 8360 -1977 with latest amendments 75x63
Supply and delivery at site of brand new Electrofusion Reducer as per IS 8360 -1977 with latest amendments 90x63
Supply and delivery at site of brand new Electrofusion Reducer as per IS 8360 -1977 with latest amendments 90x75
Providing Sluice valve/ scour valve confirming to IS 1538 (Part-I to XXII) 1978 with latest amendments if any cost of all materials, labour charges etc. complete. 80mm dia
Labour charges for making flanged joints including cost of jointing materials comprising of rubber insertion, bolts and nuts including giving hydraulic test to the required pressure as per ISS with al...
Providing Air valve confirming to IS 1538 (Part-I to XXII) 1978 with latest amendments if any. 80mm dia
Supply and delivery at site of brand new best make non-return valve as per IS 778/1984 with ISI Mark and as per its latest amendments 80 mm dia
Supply and delivery of Woltman model with removal mechanism water meters confirming to ISO 4064 part I,II,III class B or IS 779 and IS 2373 with life cycle test certificate from FCRI/ NABL accredited ...
Supply and delivery of Woltman model with removal mechanism water meters confirming to ISO 4064 part I,II,III class B or IS 779 and IS 2373 with life cycle test certificate from FCRI/ NABL accredited ...
Supplying and fixing of fixed height surface box H-4057 MD-KU with PP 40% GF Lid, Housing of PA+, Locking clip of PP with Notched bolt M 12 x 130 hexagon head A2-70 for service connection valves, desi...
Wet Mix Macadam (Plant mix method) Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical ...
Providing and constructing un-reinforced plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M20 (Grade), c...
Approved make Electro fusion saddle comply with BS EN 12201-3:2011, PN - 12.5 rating and food grade raw material as per BS 6920 for effect on water quality intended for human consumption. Material of ...
Providing and fixing to wall, ceiling and floor, medium density polyethylene pipes 6.00 kgs/sq.cm working pressure of outside diameter with special flange, compression type fittings, wall clips, makin...
Providing, Laying and Fixing GI pipes conforming to IS 1239:1990 with latest amendments complete with GI fittings (excluding the cost of fittings) with cuts and threads wherever necessary, including t...
Providing, Laying and Fixing GI pipes conforming to IS 1239:1990 with latest amendments complete with GI fittings (excluding the cost of fittings) with cuts and threads wherever necessary, including t...
Supply and delivery at site wrought middle steel (galvanized) 15 mm dia GI bend confirming to IS 1239- II, 1991 with latest amendments if any.
Supply and delivery at site wrought middle steel (galvanized) 15 mm dia GI union confirming to IS 1239-II, 1991 with latest amendments if any.
Supply and delivery at site wrought middle steel (galvanized) GI elbow confirming to IS 1239-II, 1991 with latest amendments if any .
Providing and fixing Flow control valve using food grde materials SS 316 ball / 1/2" [15mm] including cost of all materials, labour charges, HOM and testing complete as per of following specification....
Providing and fixing brass bib cock of approved quality
Supply and Fixing of RCC demarcation stones of 30 cms x 15 cms and 90 cms deep using 1:2:4 cc and 6mm dia rods for verticals and stirrups and rendered smooth , including engraving letters "KWB and Arr...
Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :New work (two coats) over and including water thinnable priming coat with cement primer after th...
Providing and laying in position Reinforced cement concrete for columns, braces and ring beam above ground level. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per re...
Providing and laying in position Reinforced cement concrete for shell portion, bottom dome / slab and ribs over the staging. The granite/trap/basalt crushed graded coarse aggregates and fine aggregate...
Providing and laying in position Reinforced cement concrete for top dome of water tank over the staging above the ground level. The granite/trap/basalt crushed graded coarse aggregates and fine aggreg...
Providing and laying in position Reinforced cement concrete for side walls of water tank over the staging above the ground level. The granite/trap/basalt crushed graded coarse aggregates and fine aggr...
Providing and laying in position Reinforced cement concrete for top dome of water tank over the staging above the ground level. The granite/trap/basalt crushed graded coarse aggregates and fine aggreg...
Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...
Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixe...
Providing and removing centering, shuttering, strutting, propping etc., and removal of form work for foundations, footings, bases of columns for mass concrete including cost of all materials, labour c...
Steel Fe 550(For OHT)
Labour charges for fabricating mild steel or torsteel bars of all sizes for reinforcement for RCC works including conveying steel to work spot with all lead including cleaning, straightening, bending,...
Providing two coats of water proof cement painting with approved colour and shade over one coat of primer including scrapping the surface with wire brushes etc. before removal of scaffolding for new R...
Ladder inside the container: Providing anodized aluminium ladder using 65mm x 32mm x 3.0mm ‘C’ section for ladder side channel x 25mm dia., flutal pipe for Rungs at 250mm c/c ladder fixed at an an...
Providing and fixing MS ladder between landings, 45 cms wide using angle iron of specified sizes, 20mm MS bars at 25 cms. centre to centre, with necessary supports of same angle iron etc. as directed,...
Supplying of 1600 mm dia NP2 Class (Cistern) material transportaion including loading and unloading charges complete
Crawler mounted Crane 80 T capacity charges for lifting of 1600mm dia NP2 Class cistern [CSR 2021-2022,Item no-23,Pg No-A-44]
Supplying and fixing 40mm dia. GI pipe medium duty pipes hand railing 3 rows fixed to RCC 1:2:4 vibrated post of 150x150mm at bottom and 100x150mm at top, placed at 2 Mtr. intervals for a height of 75...
Providing and fixing RCC final and ventilators as per approved design and specifications with form works and protected with wire mesh. The plinth to be of RCC circular pillars and canopy with an ornam...
Providing and fixing MS inspection door of size 60 cms x 60 cms, including MS frame made of 50x50x6mm angle, shutters made of 3mm thick MS sheets, with hinges, locking arrangements at top etc. includi...
Providing and fixing gauge with iron sheet or enamelled guage plate of 3mm to 4mm thick, 0.23 M width with copper floats indicators and flexible nylone wires, painting figures with approved enamel pai...
Painting new letter and figures of any shade with synthetic enamel paint black or any other approved colour to give an even shade complete as per specifications (ii) English and Roman-Hyphen and the l...
Supplying and fixing DI/CI puddle flanges conforming to IS 7181-1986 with latest ammendments., in position for RCC walls including hoisting and conveying them to work spot with all lead and lifts etc....
Providing CI bank flange confirming to IS 1538 (Part-I to XXII) 1978 with latest amendments if any cost of all materials, labour charges etc. complete.80mm
Supplying, Laying and Jointing Cast Iron (CI) double flanged pipes true to line / hoisting of DIflanged pipe in position and aligning to correct plumb, including cost of jointing materials, conveying ...
Suppling Ductile Iron Push on special confirming to IS 9523:2000 - All Double Socket Duck Foot DI Bends:80 X 900(80mm dia)
Providing 80 mm dia Bell mouthed pipes (flanged) confirming to IS 1538 (Part-I toXXII) 1978 with latest amendments if any cost of all materials, labour charges etc.complete. 80mm dia
Providing and fixing 1.8 m high GI barbed wire fencing with 2.4 m angle iron posts 50 mm x 50 mm x 6 mm placed every 3 m center to center founded in M15 grade cement concrete, 0.6 metre below ground l...
Supplying and fixing lightening arrestor with aluminium strip 25mm x 3mm size including finial and grounding, aluminium strip to be embeded in one of the columns in and independent GI conduit of 40mm ...
Earth work excavation by manual means for drains,canals, waste weir, draft, approach channels, key trenches, foundation of bridges and such simillar works in all kinds of soils , as per drawing and te...
Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...
Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mix...
Providing Thermo-Mechanically Treated bars of grade Fe-550 Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position, binding and anchoring to adjacent members...
Additionalities for Formwork, Centering & Scaffolding
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
3709.docx
Tender Document • 0.26 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .