REPAIR / MAINTENANCE TO LT OH LINES / UG CABLE, MCCB, MAIN SWITCHES, VINTAGE LT PANEL BUS BAR CHAMBERS, POLE PAINTING, EARTHING AND ALLED WORKS AT MAIN CAMP AT AF STATION TAMBARAM

Amount

Excavation in trenches not exceeding 1.5 metre deep and not exceeding 1.5 metre wide and getting out in hard/dense soil for laying cable, foundation for pole etc complete

Returning filling in soil including providing cable cushioning with riddled earth obtained from excavation, leveling watering and well ramming in layers not exceeding 25cm thick over the cushion layer all as specified and directed.

Removing of surplus soil to a distance not exceeding 50 metre and depositing where directed at a level not exceeding 1.5 metre above the starting point.

M & L for brick protection to cable using old size sub class 'B' bricks, laid flat, dry butt jointed, laid lengthwise perpendicular to the axis of cable all as specified & directed.

Relaying of old serviceable bricks of any size removed from old cable trenches laid across trenches for cable protection.

M&L for plain cement concrete 1:3:6, type C1, using 20 mm graded stone aggregate as in foundation/ coping of poles including necessary form work and finishing the exposed concrete surfaces even and fair all as specified and as directed

M&L for Straight through joints suitable for 3.5/4 core PVC insulated and PVC sheathed armoured LT underground cable with aluminium conductors including joint kits complete for making joints all as specified and as directed for the following : - (a) 2/4 core cable 6 to 16 sqm Make :- Raychems / Densons / M-Seal /Birla-3M / CCI / Siemen

(b) 3.5/4 core cable 25 to 50 Sq mm.

(c) 3.5/4 core cable 70-120 Sq mm

(d) 3.5/4 core cable 150-185 Sq mm

(e) 3.5/4 core cable 240-300 Sq mm

M&L for End termination indoor/out door heat shrinkable joint kits suitable for 3.5/4 core PVC insulated and PVC sheathed armoured LT underground cable with aluminium conductors including joint kits complete for making joints all as specified and as directed for the following : - Make :- Raychems / Densons / M-Seal /Birla-3M / CCI / Siemen

3.5/4 core cable 25 to 50 Sq mm.

3.5/4 core cable 70-120 Sq mm

3.5/4 core cable 150-185 Sq mm

3.5/4 core cable 240-300 Sq mm

M&L for Sepatating pick and stacking stone aggregate spread in the installation yard of transformer/two/four pole structure aside for re use cleaning surface free from vegetation, grass etc.., all as directed by Engineer -in-Charge.

Supply and spread 20/40mm graded stone aggregate as approved quality for installation yard all as directed.

M&L for cutting, removing the vegetation growth and surface dressing all around the installation yard including 4/2 pole structure area to keep the installation area (external only) clean and tidy. Note :- All the sub station yards shall be kept clean through out the contract period by repeatedly removing the grass/ however weeds as and when ordered by Engineer-in-charge depending on the growth of the grass, however this item shall be measured and paid only once during entire contract period.

M&L for cutting chases on concrete surfaces for concealed GI tubing/HDPE pipe, girth exceeding 10 cm but not exceeding 20 cm ,making good to facing and disturbed surface in cement morter 1:3 and finished as per existing all as directed.

Taking out the existing LT UG cable of any description of following size to find out the fault and re-laying the serviceable LT UG cable 1100 Volts grade PVC insulated PVC sheathed amoured, heavy duty, in trenches/walls/poles/passing through pipes with multistranded aluminium conductor including necessary lugs/thimble/ferules connection, testing and commissioning complete all as specified. Note: [a] Earth work, excavation sand cusioning, bricks for protection, GI pipe, LT UG Cable Joints etc shall be measured separately under relevant items of this schedule . [b] Defective portion of cable shall be removed, serviceable cable shall be re-laid and balance with new LT U/G cable .(C) New LT UG cable shall be measured and paid as Supply only LT UG cable under schedule /BOQ item No 16 of this schedule.( a) 6 to 16sqmm 2/4 core

(b) 25 sqmm to 35 sqmm 2/4 core

(c) 50 sqmm to 120 sqmm 3.50 core

(d) 150 sqmm to 240 sqmm 3.50 core

(e) 300 sqmm to 400 sqmm 3.50 core

Supply and laying LT UG cable 1100 Volts grade XLPE insulated PVC sheathed amoured, heavy duty, in trenches/walls/poles/passing through pipes with multistranded aluminium conductor including lugs/thimble/ferules connection, testing and commissioning and taking out old UG cables complete for the following sizes. Note: [a] Earth work, excavation sand cusioning, bricks for protection, GI pipe, LT UG Cable Joints etc shall be measured separately under relevant items of this schedule .

6 sqmm 2 core

10 sqmm 2 core

16 sqmm 2 core

16 sqmm 4 core

25 sqmm 3.50 core

50 sqmm 3.50 core

70 sqmm 3.50 core

95 sqmm 3.50 core

120 sqmm 3.50 core

150 sqmm 3.50 core

185 sqmm 3.50 core

240 sqmm 3.50 core

400 sqmm 3.50 core

M&L for GI tubing 'Light' grade with all fittings for cable protection fixed on poles/walls/laid under roads crossing etc and made good the disturbed surfaces/area for following sizes of pipes :-

For 40 mm Bore

For 50 mm Bore

For 80 mm bore

For 100 mm bore

M&L for MCCB 4 pole, 415 volts fixed overload & fixed short circuit setting including disconnecting the incoming/outgoing cable connections and re-connecting with suitable aluminum lugs/ferruls etc. including taking out the existing unserviceable MCCB and making good the disturbed surface for following capacity.

100 Amps with breaking capacity 16 KA

125 Amps with breaking capacity 25 KA

160 Amps with breaking capacity 25 KA

200 Amps with breaking capacity 36 KA

250 Amps with breaking capacity 36 KA

320 Amps with breaking capacity 36 KA

400 Amps with breaking capacity 36 KA

M&L for painting the existing steel tubular LT poles, 9m long including cross arms, channels, angle iron support, bracings, clamps etc. with two coats of aluminum paint superior quality of approved make on surfaces exposed to view and making 30cm wide strips (Total 5 Nos) with white and black paint alternately on external surface above PCC benching including preparation of old painted surfaces by scraping etc complete all as specified & directed.

M&L for cutting, trimming and prunning of trees/tree branches of any girth upto 4m all around existing LT/HT over head lines including cleaning the disturbed area beneath the LT/HT overhead lines and removing the tree/ tree branches and debris from at site and depositing where directed at site. Note: (a) This item shall be measured and paid only once during entire contract period , however each span of LT over head line shall be clear from tree branch growth through out the contract period seperately. (b) Cutting trimming, prunning of tree / branches shall be carried out as and when ordered by Engineer-in-chrage depending on growth of tree (c) Approximate span between poles shall be 45m to 60m.

Taking down old serviceable conductors any description and re-stringing/ tightening of ACSR conductor (size- squirrel/ weasel/ ferret) / GI earth continuity conductor/ cradle up to the permissible sag limit between any span length and binding the with new binding wire of the same materiel to insulators all as specified and as directed. Note :Approximate span between poles shall be 45m to 60m.

M&L for pin type insulator, porcelain, vitreous, white, brown or green insulator of size 100 mm height, 65 mm dia for 1100 volts grade, including one galvanised mild steel spindle, two galvanised iron washers and one galvanised iron bolt including taking out the old unserviceable insulator and making good the all as specified and as directed. Make :- MYSORE/ BHEL/ PORCELAIN / JAIPURIA BROS / Jayshree / WS Insulators

M&L for removing old/burnt out jumper connection in binding with HT/LT lines from position including re-binding the same with new binding wire of size 3.25mm aluminium wire all directed by Engineer- in- charge

Material and labour for earthing complete with GI plate electrode 600x600x6mm thick, buried directly in ground (earth pit not less than 2.25m deep below ground level) with top edge of plate not less than 1.5m below ground level connected to earth lead of 32mm x6 mm GI strip means of bolts, nuts, washers of galvanized all as shown in electrical plate No.3 of SSR Part-I including necessary excavation and earth work. PCC 1:3:6 type C1 chamber, RCC cover, 50mm thick in cement concrete 1:2:4 type B1 with 6mm CTD 140mm centre to centre with suitable handle, watering pipe 20mm dia light grade pipe with funnel, charcoal salt, GI pipe 40mm dia for protest GI strip connected to earthing test point all as specified including testing and commissioning on completion

Supply & fixing of Sheet metal enclosure suitable for 4 pole MCCB upto 125 A MCCBs,36 KA Size I Enclosure for DU100H/DU125H/ DU100D125D/DN0/DY125U with all connections all as directed by Engr in charge (Make-L&T Cat part no CM909960000 or equivalent from list of makes)

Supply & fixing of Sheet metal enclosure suitable for 4 pole MCCB upto 250 A MCCBs,36 KA Size II Enclosure for DU250C/DU250/ DN1with all connections all as directed by Engr in charge (Make-L&T Cat part no CM91003OOOO or equivalent from list of makes)

S&F MCB SP 06 to 32 Amps 10 KA 230 volts all as specified and directed.

S&F MCB SPN 06 to 40 Amps 10 KA 230 volts all as specified and directed.

S&F MCB TP 63 Amps 10 KA 415 volts all as specified and directed.

S&F MCB TP 100 Amps 10 KA 415 volts all as specified and directed.

S&F Insulating Rubber matt of size 1Mtrx 2 Mtrx 2.5mm thick

S&F Danger notice plate made out of MS sheet 1.6mm thick , vitreous enamel white with letters, figures and conventional skull and bones in signal red colour and fixed with MS clamps, bolts and nuts of approved size for HT 25x20cm all as specified and directed.

Supply install testing and commissioning of LT Panel board factory made,CPRI approved of size 1.5x1. 0x0.6 mtr suitable for 3 phase 415 Volt of both side opening double door with push type metal lock, heavy duty wide hinges, separate common across cable aley,made out 2 mm CRCA Sheet with angle iron frame of size 50 x 50 x6 mm outdoor type, free standing cubical type totally enclosed wheather dust and vermin proof with front and rear opening with locking arrangement of 440 Volts 3 phase 4 wire 50 Hz having aluminium bus bar of capacity 600 Amps ( 50X5 mm cross section), with IP 54 as per IS 13947 protection, and half neutral with aluminium bus bar RYB duly insulated complete including internal wiring with copper conductor, provn of suitable cable glands including two coats of primer and one coat of spray painting including connecting all incoming and outgoing cable feeders with necessary lugs ferrules etc. including pc foundation support, well finishing with cement mortar. Comprising of the following switch gear and accessories are as under complete all as specified and as directed.

M/s Bakiyalakshmi Enterprises

rc enterprises

PSK Enterprises

ragavbuilders