Full Deposit Works

The work of erection of 11 KV HT/LT Lines & 25/63/250 KVA Capacity Sub-Stations for electrification of various sites of Jal Jiwan Mishan as CWR-1 Baraimanpur, CWR-2 Baraimanpur, Turra Arkhan Purwa, Dingwahi-1, STW No. 254 Vill. Pindakhar, Govt. ITI Bansi Atarra etc. under FULL DEPOSIT SCHEME 2024-25 under EDD, ATARRA, including carriage of all required material from ESC Banda to work site, alongwith its loading, unloading & dragging at the respective ends and also safe carriage of old line material/scraped from site to store centre, if any. The bidder shall be responsible for complete execution of the work under the scope of tender specification. Any work/activity not specifically indicated but is required for systematic execution of job shall be carried out by the contractor without any extra payment. The material supplied by contractor should be the best quality and as per standard including transportation, if any. Details of the work as given below ;-

Safely cartage of following poles from ESC to site of work -

PCC Poles 8.5 Mtr. Long

Safely cartage of line material viz. conductor, cable, wire, x-arm, clamps, channels, insulators, fittings, angles, earthing rod, stay etc.

Erection of PCC Poles 8.5 Mtr. Long as SP with complete HT/LT fittings of all accessories as per direction of engineer incharge/RESSPO norms.

Erection of PCC Poles 8.5 Mtr. Long as DP/SDP with complete HT/LT fittings of all accessories as per direction of engineer incharge/RESSPO norms.

Concreting/grouting of newly erected single/double pole structure on 8.5 Mtr. PCC Poles as per direction of supervising engineer/RESSPO manual. The support shall be grouted with cement, sand and brick ballast/stone ballast in ratio 1:4:8 (0.285 Cu. Mtr. each), including the cost of arrangement of cement, sand, brick ballast/stone ballast, stone pad etc. as per actual sire requirement, including the cost of labour, T&P and carrier etc. required for proper completion of work.

Erection of stay set complete at digging of pit including the cost of grouting with cement, sand and brick ballast/stone in ratio 1:4:8 as per RESSPO norms alongwith nozeling & binding of stay set, stay.

Fixing of earthing rod as per direction of supervising engineer/RESSPO manual, including the cost of labour, T&P etc. required for proper completion of work.

Laying, stringing, binding and termination etc. of 11 KV XLPE Cable 3x70 Sq.mm. (Double Ckt.) with fitting of all related accessories as per direction of supervising engineer/RESSPO manual.

Laying, sagging, stringing, binding and jumpering of ACSR Weasel conductor on the newly erected poles with fitting of all related accessories as per direction of supervising engineer/RESSPO manual.

Laying, stringing, binding and termination etc. of LT ABC Cable of suitable size on the newly erected poles with fitting of all related accessories as per direction of supervising engineer/RESSPO manual.

Laying, stringing, binding and termination etc. of LT PVC Cable 3.5x70/150 Sq.mm. with fitting of all related accessories as per direction of supervising engineer/RESSPO manual.

Erection & fixing of 11 KV Cable jointing Kit outdoor/indoor (3x70 Sq.mm.) with fitting of all accessories as per RESSPO manual.

Erection, fixing & transportation of 11 KV CT/PT pole mounted unit 10/5 A with fitting of all accessories as per RESSPO manual.

Erection & fixing of T-Off Channel with clamp & Nut-Bolts alongwith fitting of all accessories as per RESSPO manual.

Erection, fixing & transportation of 3 Ph. 4 W Static Meter with fitting of all accessories as per RESSPO manual.

Erection, fixing & transportation of 11 KV Pilfer Proof metering cubicle with fitting of all accessories as per RESSPO manual.

Erection & fixing of Guarding Angle with fitting of all accessories as per RESSPO manual for guarding of 11 KV/LT Lines at road/river crossing by laying two nos. GI wire parallel and fixing of lacings (tilli) at a distance at 2-3 Mtr.

Safely cartage and Erection/installation of LT Incoming Pannel with fitting of all accessories on structure with loading and unloading on both sites in proper alignment as per direction of engineer incharge/RESSPO manual.

Erection & fixing Danger Board with clamp & Nut-Bolts alongwith fitting of all accessories as per RESSPO manual.

Erection & fixing TPMO Set with fitting of all accessories as per RESSPO manual.

Erection & fixing Fuse Set with fitting of all accessories as per RESSPO manual.

Safely cartage and installation of 25 KVA capacity transformers on double pole structure with loading and unloading on both sites in proper alignment as per direction of engineer incharge/RESSPO manual.

Safely cartage and installation of 63 KVA capacity transformers on double pole structure with loading and unloading on both sites in proper alignment as per direction of engineer incharge/RESSPO manual.

M/s. SHIVOM CONSTRUCTION AND SUPPLIERS (BID ID -4801751)