RENOVATION OF TOILETS INSIDE AND OUTSIDE OF 112HU TECH FLIGHT HANGARS AND PROVISION OF CERTAIN MINOR WORKS AT AIR FORCE STATION YELAHANKA

Amount

Demolition of Cement Concrete (Un reinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level)

M&L for 25mm thick Cement concrete 1:2:4,type B1 using 20mm graded stone aggregate complete all as specified.

M&L for screed bed or bedding layer of mortar 15mm thick in CM 1:4 for laying floor finishes.

M&L for Non skid coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match all as specified.

M&L for Glazed colorued Ceramic tiles of size 450X350X7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match as in skirting/dado

M&L for 25mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar 1:4 including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L for vitrified tiles light shade of 10mm thick and area of each tiles not exceeding 0.36 Sqm,in floors etc.set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed in CM 1:4 all as specified and directed.

M&L for vitrified tiles light shade of 10mm thick and area of each tiles not exceeding 0.36 Sqm,as in skirting etc.set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10 mm thick rendering in CM 1:3 for dado/skirting finished all as specified and directed.

Taking down cement or cement lime plaster on brick or stone walls etc, including raking out joints, hacking for key, scrubbing down with water etc

Demolition of Brick work or stone/boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches; pillars, etc, but excluding ashlar facings, dressed stone work and precast concrete articles

M&L for brickwork with subclass 'B' or locally available best quality old size bricks, straight or curved on plan exc 6 m mean radius, built in CM 1:6 as full brick thick wall all as specified.

M&L for Brick work with sub- class "B" bricks, straight or curved on plan to any radius in half brick thick walls, built in CM 1:4 all as specified.

M&L for rendering 10mm thick in CM 1:4 on fair faces of brick work or concrete surfaces finished even and fair to receive wall finished such as dados.

M&L for rendering15 mm thick cement plastering CM 1:4 on other than fair faces of brick work or concrete surfaces finished even and smooth without using extra cement.

M&L for rendering 15mm thick in CM 1:4 on fair faces of brick or concrete surfaces finished even and smooth without using extra cement.

M&L for rendering 15mm thick in cement mortar 1:6 on fair faces of brick or concrete surfaces finished even and smooth without using extra cement.

M&L for preparation of newly plastered surfaces and applying two coats of cement base paint over a coat of primer on newly plastered surfaces complete all as specified.

Taking down chowkats with shutters n. exc 1.50 Sqm (w/o taking off shutters from the frames) and removing to or from stores.

Taking down chowkats with shutters exc 1.50 Sqm but not exc 4.00 sqm (w/o taking off shutters from the frames) and removing to ot from stores

Resecuring or easing & adjusting of shutters of any description n exc 1 sqm without taking down

Resuring or easing & adjusting of shutters of any description exc 1 sqm and n exc 2 sqm each without taking down

Resecuring or easing & adjusting of shutters of any description of exc 2 sqm each

S&F Pressed steel frames of size 105 x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete as specified .

M&L for cement concrete 1:2:4, Type B0 using 12.5mm graded stone aggregate as in filling back of chowkats

M&L for cement concrete 1:2:4, Type B1, using 20mm graded stone aggregate as in bed plates,cill bands,and similar items etc all as specified.

S&F 2nd class Hardwood 35mm thick plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers; supplied and fitted to chowkats.

S&F Aluminium anodised barrel Tower bolt 200mm long of extruded section and fixed

S&F 300mm aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts of extruded sections or cast-aluminium alloy and fixed.

S&F 125mm long extruded aluminium alloy handles, fabricated type anodised.

S&F 150mm long floor door stopper of aluminium alloy body and tongue , anodized with hard drawn steek spring fixed in floor

S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S frame shall be covered with heat moulded plain colour PVC "C" channel having a PVC sheet stirp of 20mm width stuck inside with solvent cement for stiles and Prelam PVC sheet for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of of Prelam PVC sheet at both side to be fitted in M.S frame welded/sealed to the stiles &rails with suitable Prelam sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing

S&F figured glass, 4.00mm thick pin head type and glazing and fixed to aluminium windows/ventilators n exc 0.50 sqm in each pane

Taking up or down steel tubing 25mm bore and connections, including cleaning for re-fixing or removal to store.

Taking up or down steel tubing 20mm bore and connections, including cleaning for re-fixing or removal to store.

Taking up or down steel tubing 15mm bore and connections, including cleaning for re-fixing or removal to store.

S&F 25mm bore GI Tubes medium grade with all fittings fixed complete to walls and ceiling or laid in floor and trench complete all as specified and directed.

S&F 20mm bore GI Tubes medium grade with all fittings fixed complete to walls and ceiling or laid in floor and trench complete all as specified and directed.

S&F 15mm bore GI Tubes medium grade with all fittings fixed complete to walls and ceiling or laid in floor and trench complete all as specified and directed.

Refixing of old steel tubing and connections in new or old position (Walls, ceiling, floors etc). Bore of pipe 25mm

Refixing of old steel tubing and connections in new or old position (Walls, ceiling, floors etc). Bore of pipe 20mm

Refixing of old steel tubing and connections in new or old position (Walls, ceiling, floors etc). Bore of pipe 15mm

S&F in repairs Gun-metal Gate valve or globe valves, with iron wheel head, screwed both ends for iron pipe and fixed,bore of pipe 25mm.

S&F in repairs Stop valves fancy type, chromium plated with long shank and cup (concealed type),bore of pipe 20mm.

S&F in repairs Stop valves fancy type, chromium plated with long shank and cup (concealed type),bore of pipe 15 mm.

S&F in repairs 15mm bore Bib taps fancy type chromium plated, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified.

S&F in repairs 15mm bore Pillar taps, fancy type cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without letterred "Hot" or "Cold" with long screwed shanks and fly-nuts, screwed for iron pipe complete all as specified.

S&F rotational moulded polyethylene water storage tanks of capacity 500 litres (cylinderical vertical with closed top) hoisted and fixed in position including screw type lid and all accessories complete all as specified.

S&F Brass ball valves, high pressure, with polythene float and fly nut complete, screwed for iron pipe or brass ferrule and fixed,Bore of pipe 25mm.

M&L for Reinforced Cement Concrete 1:2:4, Type B1 using 20mm graded stone aggregate as in slab supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed.

Cutting chases in Brick walls, pinning in making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc; and cutting chases for concealed water tubing or concealed conduit wiring , etc., and making good, cutting not exc 10 cm but not exc 20 cm girth.

Use and waste formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; rough finsihed surfaces of concrete not exceeding 200mm thick (Horizontal or sloping), etc.,complete all as specified and as directed.

M&L for TMT bars 10mm dia & over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

S&F in repairs Wash basins, Vitreous China (flat back or angle back type) of size 630 x 450mm excluding taps,waste,chain and plug and porcelain stopper but including brackets.

S&F in repairs Vitreous China wash down water closet pan ( Pedestal pattern), white including for fixing the following component parts, viz: pedestal pan (wash down water closet) with 'P' or 'S' trap, seat and cover for pedestal pan, flushing cistern (high level or low level), brackets; chain and pull or lever handle, flushing pipe of steel tube or polyethylene including jointing to socket of flushing rim (with and including India rubber cone joint, if flushing rim connection is nozzle pattern) and connecting pipe to union of flushing cistern, in let and overflow pipes connecting only to flushing cistern, anti-syphonage pipe joint to socket or stop per, if anti-syphonage pipe is not required complete etc complete. (Note:Flush pipe and flushing cistern will be measured and paid seperately under relevant items of this schedule)

Supply only 15 litres PVC valve less, syphonic action type , flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets.

Supply only Flush pipe of polyethylene of low or high density or PVC 32mm dia, for WHB

S&F in repairs Vitreous China urinals full stall type complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of flushing cistern,fixing supply pipe to flushing cistern, trap and waste pipe white but including flush pipe of polyetheylene of low or high density or PVC 32mm dia)

S&F vitreous China Urinal partition white of size 310 x 700mm

S&F Soap dish Vitreous China white approximate size 160 x 160 x 90mm

S&F Glass Shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated braket guard and railing 60 cm long fixed in repairs.

S&F Towel Rail 600mm long of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats. (Minimum weight 190gms)

S&F in repairs 100mm dia of PTMT (Min wt 25 gms)gratings.

S&F Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified.

S&F Toilet paper holder of brass, chromium plated fixed to walls

S&f Waste coupling of PTMT (half or full threaded) suitable for urinals (Min weight 32mm - 45 gms)

S&F PVC connection 15mm dia sizes with PTMT nuts of length 450 mm complete all as specified & directed.

S&F PVC (SWR) "P" trap 110mm

S&F PVC (SWR) "S" trap 110mm

S&F PVC (SWR) floor trap, plain with grating including jointing with solvent 75mm

S&F 75mm dia PVC (SWR) pipes, single socketed, in any length with rubber rings fixed to wall or laid in floor complete all as specified and as directed

S&F 110mm dia PVC(SWR) pipes, single socketed, in any length, with rubber rings fixed to wall or laid in floor complete all as specified and as directed.

M&L for preparation of old plastered or unplastered wall surfaces and applying one coat of white wash complete all as specified.

M&L for preparation of old plastered or unplastered wall surfaces and applying one coat of cement base paint complete all as specified.

M&L for preparation of old plastered or unplastered wall surfaces and applying one coat of distemper with oil emulsion complete all as specified.

M&L for preparation of old painted wooden surfaces of any description, not otherwise described, over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified.

Excavating over areas, n.exc 1.5m deep and getting out in Hard/dense soil

M&L for Hardcore of gauge n exc 63mm, deposited, spread and levelled in layers n exc 15 cm thick, watered and rammed to a true surface.

M&L for 100mm thick PCC 1:4:8 ,Type D2, using 40mm graded stone aggregate as in foundations, filling and mass concrete

M&L for 100mm thick PCC 1:2:4, Type B2 , using 40mm graded stone aggregate as in flooring , finished the surface even and smooth without using extra cement.

M&L for forming 20mm thick expansion joint filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound Grade "B",thickness of concrete slab 100mm.

M&L for forming contraction (dummy) Joint 65mm deep x 10mm wide filled with sealing compound Grade "B"

Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings and wall cladding.

Dismantling timber scantlings in any position un framed work 40 sq.cm and over in section,in any position.

Supply and fix steel work in tubular trusses including special shaped washer etc complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St-240 all as specified and directed

S&F prepainted galvaume aluminum zinc coated GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed.

M&L for 25mm thick PCC 1:2:4, type B1, using 20 mm graded stone aggregate and finished the surface fair and even, as in flooring and pavements all as specified and directed..

Material and labour for 10mm thick plastering in cement mortar 1:3 for vertical faces of walls all as specified & directed.

M&L for non skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match coloured tiles all as specified and directed.

M&L for coloured glazed ceramic tiles of size 300x200x7mm thick on vertical surface such as skirting, dados, risers etc. set and jointed in neat cement slurry and pointed in coloured cement or pigment to match colour tiles all as specified and as directed.

M&L for applying three coats of white wash on newly plastered surfaces of walls/ previously untreated surfaces all as specified and directed.

M&L for applying two coats of white wash on old surfaces of wall / previously treated surfaces all as specified and directed.

M&L for preparation of new or previously untreated steel surfaces of any description not otherwise described over 10 cm width or girth and appying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.

M&L for surface excavation n. exc 30cm deep and averaging 15cm deep and getting out in hard dense soil.

M&L for 75mm thick PCC 1:3:6, type C-2, using 40 mm graded stone aggregate and finish the surface fair and even,as in plinth protection all as specified and directed..

Supply & fix PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet,ball valve, float and handle including brackets and connections to pipes and fixing of chain and pull, or lever, if any for PVC 10 ltrs capacity , flash pipe of polythylene of low or high density or PVC pipe 32 mm dia all as specified and directed.

S&F 15 mm Stop valves, castcopper alloy,chromium plated, screwed down,high pressure,with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

S&F PVC (SWR) bends any radius 75 mm dia.

S&F Vitreous China Urinal, Half stall type, white (excluding flushing cistern, flush pipe and waste pipe) with grating and union for discharge pipe complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) etc complete all as specified & directed. Fixed in repairs

M&L for Chequered cement concrete tiles 20cm x 20cm x 25mm thick with grey cement & pigment, set, jointed and pointed in neat cement slurry etc complete all as specified & directed.

S&F Vitreous China wash basin, white, flat back, size 450x300mm excluding taps,waste,chain and plug and porcelain stopper but including brackets including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe

S&F 15mm dia pillar taps, fancy type, cast copper alloy with capstan heads,chromium plated, screwed down high pressure, with or without lettered hot or cold with long screwed shanks and fly-nuts,screwed for iron pipe complete all as specified and directed.

S&F Waste fittings, brass, chromium plated for glazed ware sinks, basins, etc.with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed of 32mm dia trap

M&L for Applying one coat of cement base paint on previously treated surface including preparation.

S & F Plastic storage crates of size 300mmx500mmx300mm front partly open (crates FPO 45 Blue coloured ) Make: NILKAMAL or equivalent.

M&L for framed work as in racks/shelves ,doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooksand hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete

M&L for Mild steel, plain, black sheet 1mm thick in wall cladding, steel gates,covering to shelves/racks and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required

Cutting holes into or through cement concrete slabs, chajjas, etc. reinforced or otherwise supercial area Exc 100sqcm but n exc Exc 250sqcm

M&L for providing, cement concrete I:2:4 type B1 using 20mm graded stone aggregate as in roof kerbs or mud stops,or in grouting, rounded or chamfered on edges.

M&L for 19 mm thick Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination, (particle board medium density, flat pressed three layer type with BWR type) adheasive & fixed with screws to timber frame work, as in racks/ shelves etc complete all as specified and as directed. .

S&F Mild steel screw bolts, diameter of neck 5 to 10 mm, (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5cm long etc complete all as specified and as directed.

Excavating in trenches not exceeding 1.5m wide and not exceeding 1.5 m deep for foundation etc., and getting out in hard/dense soil.

Excavating over areas exc 1.50 m deep & n exc 3.0m and getting out in hard/dense soil.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm in hard/dense soil obtained from excavation.

Removing excavated surplus soil to a distance not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5 m above the starting point.

M&L for Cement concrete 1:4:8, type D2 using 40 mm graded stone aggregate as in foundations, filling and mass concrete.

M&L for Brickwork with sub class ‘B’ bricks in one brick thick honey comb walling, built in Cement Mortar 1:4

Broken bricks Aggregate for loose filling, of gauge 80 mm to 150 mm graded

M&L for Providing precast cement concrete 1:2:4 Type B1 using 20mm graded stone aggregate as in landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces Set in cement mortar 1:4.

M&L for Providing cement concrete 1:3:6 ,type B1 using 20 mm graded stone aggregate as in copings, benching etc. Exposed surfaces of concrete shall be finished even and smooth with out using extra cement.

M&L extra for forming fair finished drain or channel 30 cm inner girth in cement concrete using extra cement including forms, moulds, mitered / stopped ends.

S&F PVC (SWR) bends any radius 110 mm dia.

S&F PVC (SWR) vent cowl 110 mm dia

S&F Black FRP septic tank of storage capacity 1000 litre, lncluding fixing of inlet pipe,out let pipe,vent pipes all as specified and directed and installation as per manufacturers instruction. Make- Sintex or equivalent.

S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS:733 and IS:1285, fixing with dash fasteners of required dia and size,including necessary filling up the gaps at junctions, i.e. at top,bottom and sides with required EPDM rubber/ neoprene gasket Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle,Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and all as specified & directed.

S&F 5.5mm thick Sheet glass ordinary quality and glazing with powder coated aluminium beads/cleats in square exc 0.5 sq. m in each pane and solar control film 50 micron reflective type sticked to glass panes as per intructions of manufactures, complete all as specified & as directed.

M&L for prelaminated particle board,9mm thick interior grade, prelaminated both sides with decorative choice laminations,fixed with aluminium beads & screws to aluminium frame work all as specified and directed.

S&F Anodised aluminium door shutters of aluminium section weighing 0.55 kg/m including necessary joining cleats,glazing clips, rubber neoprene packing,handles 2 Nos in each door, hinges,anodised aluminum snap beading, screws, locking arrangements,stopper, etc. complete all as specified.

M&L for roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc.

M&L for Brushing neat cement slurry with 3.0kg of cement per sq. metre

M&L for Granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone in flooring including grinding and polishing etc complete all as specified and directed.

PROVN OF MOORING POINTS consisting following items and as per Sketch 'A' aatched in Particular soecifications complete all as specified and directed by Engr-in-charge. (i) Excavation in trenches n.exc 1.5m wide and n exc 1.5m in depth in Hard/Dense soil for fdn etc or for shafts, wells cesspits. (Size of each :- 0.70m x 0.70m x 0.80m) (ii) PCC 1:2:4 type D2 (40mm graded aggregate) as in fdn (Size :- 0.70m x 0.70m x 0.10m) (iii) PCC M-20 1:1 ½ :3 graded stone aggregate as in pedestals /pillars (Size :- 0.70m x 0.70m x 0.70m) (iv) Rolled mild steel in Joist, channel, angle, or tee sections fixed as frame work with joining by welding, without connecting plates etc (cut ordinary length i.e., within 20mm of the length) (Total wt of Frame Work :- 50.00 Kg as directed by the Engineer-in-Charge) (v) TMT Bar 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips. (8.40 Kg) (vi) Rendering 15mm thick cement plaster in Cement Mortar CM 1:3 finished the surface even and smooth with using extra cement. (3.00m x 0.20 = 0.60 Sqm). (vii) Applying two coats of Acid resistant Paint over steel surfaces of any description n.exc 10cm in width or girth. ((0.0230 Sqm). (vii) Removing excavated material n.exc 50m and depositing where directed at a level n.exc 1.5m above the starting point(0.392 Cum)

Taking down carefully aluminium point wiring (light, fan, socket or power) complete, including fittings and fixtures such as switches, ceiling roses, light fittings, regulators, sockets etc, removing materials to store or offering credit,& making good disturbed surfaces of walls, floors, etc., all as specified and as directed.

Taking down carefully aluminium sub main wiring including making good disturbed surfaces of walls, floors, etc., all as specified and as directed.

Taking down carefully old unserviceable MBC DBs/metal clad sockets including making good disturbed surfaces of walls, floors, etc., all as specified and as directed.

Taking down Exhaust fan, dismantling blades and removing fan and refixing ceiling fan after completion of re-wiring, and connecting up including provision of cable from ceiling rose or connector to fan all as directed.

M&L for Painting of Exhaust fans complete, in site with synthetic enamel paint by spraying including filling caviteis with filler, one coat after cleaning all dust etc.

M&L for Point wiring complete with 1.5 sqmm single core PVC insulated heavy duty ISI Marked, FRLS, unsheathed cable 1100 volts grade with multistranded copper conductor drawn through and including concealed PVC conduit not less than 20mm dia and including provision of PVC insulated heavy duty copper conductor, 1.5 sqmm for earth continuity conductor and connected to common earth dolly, including suitable size of sheet metal box 1.6mm thick fixed and flushed inside the walls, with 3mm thick laminated sheet top cover for housing the switches, socket outlets, fan regulators Including fixing PVC round block 8 cm dia and 4 cm in depth etc., for the following:-

One light/Exhaust Fan point controlled by one switch.

One switch socket outlet point 3 pin 5 Amps on same board with other switches.

All as per item No 139 above but wiring with 2.5 sq mm copper cable with 2.5 sq mm for one earth continuty cable for 6 pin 15 Amps socket out controlled by 15 Amps switch.

Supply and fix ceiling rose surface bakelite 65x50mm 3 terminals.

Supply and fix switch piano 5 Amps flush type one way.

Supply and fixing of 6 Amps Switch socket combination 2 in 1 flush type.

Supply and fix switch socket combination 2 in 1, 3 pin 6 and 16 Amps flush type universal.

Sub main wiring complete with two runs of 4 Sqmm single core PVC insulated heavy duty ISI Marked, FRLS, unsheathed cable 1100 volts grade, multistanded with copper conductor drawn through and including 20 mm dia non matallic rigid PVC white conduit and conduit accessories concealed, and including provision of PVC insulated heavy duty ISI Marked, unsheathed cable 1100 volts grade 4 Sqmm for earth continuity conductor and making good the disturbed surface also matching the existing surface all as specified and as directed by Engineer-in-charge.Note:- Two Run of 4 Sq mm, One Run of 4 Sqmm And PVC conduct is measured as one Run or one Meter.

Supply and fix LED lights fitting 20 Watt, 220V, 4 feet long, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed by Engr-in-Charge.

Supply and fix in repair LED light fitting (mirror light) with high out put diffuser, 2 feet long, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size and two round block for mounting tubelight fittings including dismantling old unsv fitting complete all as specified and directed by Engr-in-Charge.

Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers complete.

Supply and fix in repair sheet metal enclosures for MCB distribution board 230 Volts Single pole and neutral 4 way Double door with 200 Amo rated bus bar complete including flushing the DBs inside the wall and making good the disturbed surfaces and also matching with the existing surface all as specified and directed by Engr in charge.

Supply and fixing in repairs MCB Single pole and Neutral, 230 volts, 32 Amps, 'B' Curve, 10 KA complete all as specified and as directed.

Supply and fixing MCB Single pole and Neutral, 230 volts, 32 Amps, 'B' Curve, 10 KA complete all as specified and as directed.

Supply and fixing in repairs MCB Single pole, 230 volts, 5 to 32 Amps, 'B' Curve, 10 KA complete all as specified and as directed by Engr-in-charge.

M&L for cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, cutting not exceeding 10 cm girth all as directed.

M&L for Provision of hole on the wall for fixing of the exhaust fan and connecting with the ceiling rose complete all as specified and directed by Engr-In-charge.

M&L for point wiring with 1.5 Sqmm (nominal cross sectional area ) , single core, PVC insulated with multistranded PVC unsheathed copper conductor FRLS cable in and including PVC casing - caping of suitable size medium grade ISI marked complete and sunk CI/pressed steel terminal switch boxes flush mounting type with new hylam sheet (white) top cover, including earth wire continuity of PVC insulated, unsheathed 1.5 Sqmm (nominal cross sectional area) copper conductor connected to all fittings, sunken boxes and common earth and connected to earth dolly complete all as specified and directed for the following:-

One wall mounted/ceiling fan point controlled by one 5 Amps switch

Supply and fix switch socket combination 5 Amps multipin flush type.

Supply and fix wall mounted cabin fan 400 mm sweep, 220-240 volt AC, 50 Hz sigle phase with Thermal overload Protected Motor and connecting up including provison of cabe from ceiling rose/connector to Wall fan all as specified and directed. Make. Polycab Model : Fantasy DLX or equivalent to Havells/Crompton.

Supply and fix ceiling fans, complete with three blade, down rod, accessories 230V, 1200mm sweep, with Squirrel cage induction motor complete all as specified and directed by Engr-in-charge.

S&F miniature circuit breaker (MCB) 240V, 10KA, 'C' curve ,SP 6 to 32AMP and current carrying capacity in the MCB DB complete with connection testing and commissioning complete all as specified and directed.

Supply and fix non metallic rigid PVC white conduit not less than 20mm dia and conduit accessories concealed/fixed to wall/floors/ceiling etc complete all as specified and direct by Engr-in-Charge.

Supply and fix flexible PVC conduit not less than 20mm dia and conduit accessories concealed/fixed to wall/floors/ceiling etc complete all as specified and direct by Engr-in-Charge.

Sub main wiring complete with two runs of 2.5 Sqmm single core PVC insulated heavy duty ISI Marked, FRLS, unsheathed cable 1100 volts grade, multistanded with copper conductor drawn through and including 20 mm dia non matallic rigid PVC white conduit and conduit accessories concealed, and including provision of PVC insulated heavy duty ISI Marked, unsheathed cable 1100 volts grade 2.5 Sqmm for earth continuity conductor and making good the disturbed surface also matching the existing surface all as specified and as directed by Engineer-in-charge.Note:- Two Run of 2.5 Sq mm, One Run of 2.5 Sqmm and PVC conduct is measured as one Run or one Meter.

Supply and fix in repair LED luminaire 600mmx600 mm, 36 watt, 220 V AC recessed mounted type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed by Engr-in-Charge.

JITHU CONSTRUCTION COMPANY

Raghu M Contractor

SRINIVASA ENTERPRISES