COMPREHENSIVE MAINT TO PARADE GROUND, BOMBAY SAPPERS WAR MEMORIAL AND PIONEER WAR MEMORIAL OF BEG AND CENTRE ALONGWITH STORM WATER DRAIN, CULVERTS ETC UNDER AGE B/R-II GE(CENTRAL) KHADKI

Amount

Demolition of PCC in any position not otherwise specifically provided for, as in surface channel, drains, manholes, copings, ground floors and pavings of any description and in any position and removing debris out side MD land complete all as specified and directed by Engr-in-Charge.

M & L for crushed stone dust/sand filling under floors or in foundations including watering and consolidation complete all as directed.

M & L for 75 mm thick, PCC (1:4:8) type D-2 using 40 mm graded stone aggregates as in sub base complete all as specified.

M & L for 60mm thick machine pressed glossy finish precast concrete interlocking paver block any shape and size & Colour M-35 grade with grey cement no pigment confirming to IS 15658-2006 complete all as directed.

Demolition of precast concrete block walling built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles as in kerb stone

M & L for pre cast cement concrete solid block masonry with solid block of the grade C1 (1:3:6) set in CM (1:6) complete all as specified.

Ditto all as per item No 6 above but except material

Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and directed.

Taking down cement plaster from brick or block/Stone masonry walls including raking out joints, hacking for key, scrubbing down with water etc.

M&L rendering 15mm thick in CM (1:4) on fair faces of brick work or concrete surfaces incl wpc @3% by wt of cement and finishing the surfaces even and smooth without using extra cement complete all as specified and directed with wpt.

Supplying only integral water proofing compound.

M&L for Yellow Marble Work 18 to 20 mm thick (table rubbed and polished ) as in steps , jambs, pillars, window- cills and like over 15mm thick cement screed base in CM (1:4) including pointing with white cement (1:2) using marble dust with admixture pigment to match with shade of slab rubbing , polishing and rounding to edges including demolition of existing platform complete all as specified and directed.

M & L for 18-20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, gate pillars, window- cills, cooking platforms and like over 15mm thick cement plaster in CM (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including dismantling of existing granite on any surface and rounding of edges complete all as specified and directed by Engr-in-Charge.

Ditto as per ser No 13 but on riser over and including 10mm thick rendering in CM (1:4) complete.

M&L for Kota stone slab flooring 20-25 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match including 15 mm thick screed bed in cement mortar (1:6) complete incl rounding of edges/sides ends and dismantling (Incl surface excavation, if required ) complete all as directed by Engr-in-charge.

Ditto as per ser No 15 but on riser over and including 10mm thick rendering in CM (1:4) complete.

S & F for frame work such as grill, grating etc with ends bars shouldered and / or riveted or forged into spikes, framed guard bars, barred iron doors and similar work confirming to Fe 290 Gde E-165 complete all as specified and directed.

Taking down of old frame work such as grill, grating etc with ends bars shouldered and / or riveted or forged into spikes, framed guard bars from compound walls and refixing the same incl all fittings similar work confirming to Fe 290 Gde E-165 and grills, grating etc ,in the same position including two coats of Synthetic Enamle Paint over a coat of red oxide all as specified and directed. Note : If any part of grill or similar work damaged replace the same with all fittings.

M&L for preparation new steel surfaces of any description exc 10 cm width or girth and applying two coats of Synthetic Enamle Paint over a coat of red oxide complete all as specified and directed.

Preparing new plastered surfaces on walls /jallies applying two coat of cement base paint over a coat of primer complete.

M&L for precast cement concrete louvers and jallies , 35 mm thick (measured solid), including all mouldings with plain cement concrete type B0 (1:2:4), using 12.50mm graded stone aggregate set in cement mortar (1:4) including demolition complete all as specified and as directed.

S&F for MS stainless steel tube /pipes having dia 70mm to 100mm work such as grill, grating etc with end bars shouldred and/or riveted or forged in railings incl all fittings and its dismantling directed by Engr-in-charge.

S&F for MS stainless steel chains having dia 20mm to 30mm work such as grill, grating etc with end bars shouldred and/or riveted or forged in railings including its dismantling directed by Engr-in-charge.

Dismantling wrought iron or mild steel work of any description not otherwise provided for

M&L for writing letters or figures (Block. Roman, Italic or Indian) n exc. 30 cm high with stops, commas, short lines, dashes, hyphens, brackets, etc with fluorecent paint complete all as specified and directed by Engineer in charge.

M&L for writing stops, commas, short lines, dashes, hyphens, brackets, etc with fluorecent paint complete all as specified and directed by Engineer in charge.

M&L for external stone walls/steps of any height are as follows:- (a)Cleaning of external stone surface of walls/steps at any height with pressure pump with clean water (b) Applying one coat of cleaning solution of Dr Fixit/pidilite or other reputed brand and throughly cleaning the surface, (c)The loose masonary joints to be properly pointed with (1:3) cement sand mortar mixed with WPC complete all as specified and directed. (d)Necessary scafolding shall deemed to be included in the quoted rate.scafolding shall be having ease of access for inspection purpose (e)Second washing of the surface of wall/steps any height (whereever required at site as directed by Engineer-in-charge) with super heated steam to remove grease,moss algaee & bird dropping etc with heavy jet pressure pumps (Torik stone cleaning similiar pumps,Tensid UK LTD or Doff superheated steam cleaning or similiar pumps as approved) complete all as specified and directed. (f) The filling of joints between stones with cement-Asian equivalent paint grout and application of two coats of hydrophobic stone sealer as per manufacturers instructions complete all as specified and as directed by Engr-in-charge.

M&L Preparing new concrete surface of Kerb stone and applying two coat of Kerb stone paint of shed yellow & black /white & black/red & white/red & yellow over a coat of primer as directed Engr -in-charge. Make : Roadex KB prime or equivalent

MAHESH DADAJI BACHHAV

M/S SANDEEP CONSTRUCTION COMPANY

M/S JAYCONSTRUCTION CO