Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹22.9 LAccepted-Finance | 1 | Accepted-Finance ACCEPTED BEING L1 | |
| 2 | 2₹25.6 L+₹2.7 L (11.7%)Rejected-Finance RANGAT | 2 | Rejected-Finance REJECTED BEING L2 |
Tender Value
₹26.5 L
EMD Value
₹52,985
Closing Date
31 Oct 2022, 3:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
The Deputy Conservator Officer (Silviculture)
Silva Complex, Horticulture Road, Haddo
Construction of Type II Quarter for Camp Officer, Silviculture, Rangat
2022_DCFSL_7774_1
Silva/G-128/702
Open Tender
Construction Works
Works
90 days
The Research Range office, Silviculture, Rangat
Please refer Tender documents.
5 documents required · 5 mandatory
₹0
₹52,985
Yes
23 Nov 2022
20 Oct 2022
31 Oct 2022
20 Oct 2022
31 Oct 2022
21 Oct 2022
Amount
Earth work in excavation by mechanical means (Hydraulic Excavator)/ Manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm) on plan including dressing of sides and ramming of bottoms, lift upto 1.5m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50m. All kind of soil for Footing , Plinth Beam & septic tank
Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete for footing, Plinth beam, flooring kitchen, bed room, living / dining, bed room, balcony front, back, & septic Tank
Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering all work upto plinth level: 1:4:8 (1cement: 4coarse sand : 8 graded stone aggregate 40mm nominal size) for footing, Plinth beam, flooring kitchen, bed room, living / dining, bed room, balcony front, back, & septic Tank
Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering all work upto plinth level: 1:3:6 (1cement: 3coarse sand : 6 graded stone aggregate 40mm nominal size) above Plinth beam
Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering all work upto plinth level: 1:1.5:3 (1cement: 1.5coarse sand : 3 graded aggregate 40mm nominal size) below ground level , Pedastal, Short Column, Plinth beam
Reinforced cement concrete works in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc upto floor five level excluding cost of centring, shuttering, finishing & reinforcement: 1:1.5:3(1cement: 1.5 coarse sand(zoneIII) : 3 graded aggregate 20mm nominal size) for above ground level column, long column, Tie beam, Chajjas & Slab, windows Chajja, W1,W, W2, Kitchen Slab, water tank & Bathroom, Septic tank( Bottom, sides top) & Lintel Beam
Providing and fixing upto floor five level precast cement concrete hollow block including hoisting & setting in position with cement mortar 1:3 (1 cemnt : 3 coarse sand) ost of required centring, shuttering complete of 1:1.5:3(1cement: 1.5 coarse sand(zoneIII) : 3 graded aggregate 20mm nominal size) for 40x15x20 cm Outer Wall, Door D, Door D1, window W, Window W1, window W2, Ventilator, 40x10x20cm Inner walls , Septic tank (Excluding Deductions)
Making plinth protection 50mm thick of cement concrete 1:3:6 (1cement :3 coarse sand: 6 graded stone aggregate 20mm nominal size) over 75mm bed by dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth
Centring and shuttering including strutting, propping etc and removal of form for: Foundations, footings, bases of columns etc. for mass concrete Sand filling + 1:4:8 , Footing, Pedastal, Column, septic Tank, sand filling +1:4:8 & footing
Centring and shuttering including strutting, propping etc and removal of form for:Walls (any thickness) including attached pilasters, butteresses , plinth and string courses etc.
Centring and shuttering including strutting, propping etc and removal of form for: Suspended floors , roofs, landings, balconies, and acess platform,Slab over bathroom and verandah
Centring and shuttering including strutting, propping etc and removal of form for: Lintels, beams , plinth beams, griderss, bressumers and cantilevers Plinth beam +PCC, Tie Beam, Lintel Beam
Steel reinforcement fo RCC work including straightening , cutting, bending, placing in position and binding all complete upto plinth level with cold twisted bars for foundation jali both ways Jali 10mm Q @ 0.15 c/c both ways, Column 16mm Q 4 Nos Stirrups 8mm Q @15cm c/c, Plinth Beam+ tie Beam 16mm Q @ 4 Nos + Lintel Beam 16mm Q @4 Nos Stirrups 8mm Q @10cm c/c Lintel Main Bar 8mm dia Stirrups 8mm dia, kitchen slab 8mm dia, Stirrups 8mm dia, Window Chajja W, W1, W2 8mm dia, stirrups 8mm dia , Septic tank Bottom, sides, Top 10mm dia
Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately) Sal wood Door(D) , Door (D1), Window(W), Window (W1), Window (W2), Ventilator (V)
Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws excluding, panelling which will be paid for separately, all complete for second class teak wood , 30mm thick shutters Door D, D1, Window (W), Window (W1), Window(W2), Ventilator (V)
Providing and fixing MS grills of required pattern in frames of windows etc with MS flats , square or round bars etc including priming coat with approved steel primer all complete fixed to openings/wooden frames with 20x6mm flats window(W), W1,W2 Ventilator
Providing and fixing factory made P.V.C door frames of size 50x47 mm with a wall thickness of 5mm, made out of extruded 5mm ridge PVC foam sheet, mitred at corners and joined with 2 Nos of 150mm long brackets of 15 x 15 mm MS Square tube, the vertical door frame profiles to be reinforced with 19 x 19mm M. S Square tube of 19 guage, EPDM rubber gasket wather seal to be provided through out the frame. The door frame to be fixed to the wall using M.S. Screws of 65/100mm size, Door(D3)
Providing and fixing factory made panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19mm x 19mm for styles and 15mm x 15mm for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture. M.S. frame covered with 5mm thick heat moulded PVC 'C' Channel of size 30 mm thickness, 70mm width out of which 50mm shall be flat and 20 mm shall be tapered in 45 degree angle on both side forming styles and 5mm thick, 95mm wide PVC sheet out of which 75mm shall be flat and 20mm shall be tapered in 45 degree angle on the inner side to form top and botom rail and 115mm wide PVC sheet out of which 75mm shall be tapered on both sides to form lock rail. 30mm thick pre laminated PVC door shutters
Providing 40 x 5 mm flat iron hold fast 40 cm long including fixing to frame with 10mm diameter bolts, nuts and wooden plugs and embeddings in cement concrete block 30 x 10 x 15 cm 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) for door, window & ventilator
Providing and fixing ISI marked oxidised MS sliding door bolts with nuts and screw etc 300 x 16 mm
Providing and fixing ISI marked oxidised MS tower bolts black finish (Barrel type) with necessary screws etc 150mm x 10mm Door
Providing and fixing ISI marked oxidised MS tower bolts black finish (Barrel type) with necessary screws etc 100 x 10 mm Window
Providing and fixing aluminium handles ISI marked , anodised (anodic coating not less than grade AC10 as per IS:1868) transparent or dyed to required colour or shade with necessary screws etc 125mm
Providing and fixing aluminium handles ISI marked , anodised (anodic coating not less than grade AC10 as per IS:1868) transparent or dyed to required colour or shade with necessary screws etc 100mm
Providing and fixing bright finished brass hard drawn hooks and eyes 300 mm
Steel work in built up tubular (round, square or rectangular hollow tubes etc) Trusses etc including cutting hoisting fixing in position and applying a priming coat of approved steel primer including welding and bolted with special shaped washers complete. Electric resistance or induction butt welded tubes. Main truss 50mm dia MS pipe Rafters (Bottom, Top),& 25 mm dia purlins, 25 mm dia connectors bottom, connector top 50 mm dia, all plate items 12mm base & bearing plate for column 300 x 300 x 12 mm and 150 x 150 x 12 mm
Providing and fixing bolts including nuts and washers. Bolt and nuts foundation bolt & nuts 20mm x 12" length, Purlins bolt & nuts 12mm x 1/2 x 2" length
Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete 40 mm thick with 20 mm nominal size stone aggregate Kitchen, bedroom Living / dining Bathroom, Balcony Front, Balcony Back
Providing and laying Vitrified tiles in floor with different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately).Size of Tile 600x600 mm, Kitchen, Bedroom, Living/Dining, Balcony Front, Balcony Back, Skirting Kitchen, Bedroom, Living /Dining, Balcony Front, Balcony back .
Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. 300 x 300 , bathroom, Kitchen slab, Kitchen wall (Add 10% wastage)
Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete. (300x300)
Providing and fixing precoated galvanised iron profile sheets 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre.The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required
Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete : Ridges plain (500 - 600mm)
Extra for providing and fixing wind ties of 40x 6 mm flat iron section
Providing and fixing powder coated aluminium work (minimum thickness of powder coating 50 micron) consisting of tee/ angle sections, of approved make conforming to IS : 733 in frames of false ceiling including aluminium angle cleats with necessary C.P. brass/ stainless steel sunk screws, aluminium perimeter angles fixed to wall with stainless steel rawl plugs @ 450 mm centre to centre and fixing the frame work to G.I. level adjusting hangers 6 mm dia. with necessary cadmium plated machine screws all complete as per approved architectural drawings (level adjusting hangers, ceiling cleats and expansion hold fasteners to be paid for separately). "L"angle (2.5mm thick 1 1/2" x 1 1/2") "T" angle (2.5mm thick 1 1/2" x 1")
Providing and fixing plain multipurpose cement board ( High pressure steam cured) with suitable screws for cement particle board in ceiling etc. complete (frame work to be paid separately) 6 mm thick Cement fiber board as per IS: 14862 Living/Dining, Bedroom, Kitchen, WC, Bathroom, Front Verandah
12mm cement plaster of mix: 1:4 (1cement :4 fine sand) walls , outer above ground level, Door (D & D1), window (W,W1,W2) Ventilator (V), Slab of Septic tank
12 mm cement plaster finished with a floating coat of neat cement : 1:3 (1 cement : 3 fine sand) Septic tank Bottom & inner wall
Constructing masonry Chamber 30x30x50 cm inside, in brick work in cement mortar 1:4 (1 cement :4 coarse sand) for stop cock, with C. I. surface box 100x100 x75 mm (inside) with hinged cover fixed in cement concrete slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), i/c necessary excavation, foundation concrete 1:5:10 ( 1 cement : 5 fine sand : 10 graded stone aggregate 40mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12mm thick, finished with a floating coat of neat cement complete as per standard design with common burnt clay F.P.S (non modular) bricks of class designation7.5
Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard designWith common burnt clay F.P.S. (non modular) bricks of class designation 7.5
Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface: Water thinnable cement prier - walls and Outer above ground level.
Distempering with 1st quality acrylic distemper (ready mixed) of approved manufacturer, of required shade and colour complete, as per manufacturer’s specification. Two or more coats on new work –walls and Outer above ground level.
Applying priming coat: With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) for Door (D & D1), window (W,W1,W2) Ventilator (V)
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work for Door (D & D1), window (W,W1,W2) Ventilator (V)
Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests
Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required :Kitchen sink with drain board 510x1040 mm bowl depth 178 mm
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar tap
Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Semi rigid pipe of 32 mm dia
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, Single socketed pipes of 75 mm diameter
Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion Single tee with door 110 x 110x 110mm
Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion Bend 87.5 degree 110 mm bend
Providing and fixing plain bend of required degree of 100 mm dia Sand cast iron S&S as per IS - 1729
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete 20 mm nominal outer dia Pipes
Providing and fixing 100 mm sand cast Iron grating for gully trap
Providing and fixing brass bib cock of approved quality : 15 mm nominal bore
Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end)20 mm nominal bore
Providing and fixing IS : 12817 marked stainless steel butt hinges with stainless steel screws etc. complete of 125x64x1.90 mm
Providing and fixing IS : 12817 marked stainless steel butt hinges with stainless steel screws etc. complete of 100X58X1.90 mm
Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing of Rectangular shape 453x357 mm
Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106 gms
Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet of 100 mm diameter
Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour.450 mm long towel rail with total length of 495 mm,78 mm wide and effective height of 88 mm, weighing not less than 170 gms
Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with minimum distances of 37 mm from wall face with concealed fittings arrangement of approved quality and colour, weighing not less than 88 gms
Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank
M KARIKALAN
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .