Renovation of First Floor Meeting Room at Main Lab Building at CREST Campus of IIA, Hosakote, Bengaluru Rural District

Disposal of moorum/building rubbish/ malba/ similar unserviceable, dismantled or waste material by mechanical transport including loading, transporting, unloading to approved municipal dumping ground for lead upto 10 km for all lifts, complet as per directions of Engineer-in-charge.

Drilling with core cutting machine in RCC slabs, walls etc.wherever required in buildings, manholes,ducts, water tanks, pits etc. for laying pipes,sleeves and making good the same to give an even finish . The rate shall include the cost of drilling core, providing EPOXY based water proofing compound for sealing the joints around the pipes, nominal reinforcement wherever required,scaffolding and labour charges for working at all levels ,leads and heights. (Maximum thickness of RCC members shall be 300mm) and as directed by Engineer-In-Charge.

15mm to 75mm dia

Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete

Providing and applying white cement based putty of average thickness 1mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :

Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture

Providing & applying Luxury emulsion paint of approved color to internal wall & ceiling surfaces including thoroughly brushing the surface to free from foreign matters, sand papering, filling all holes & cracks etc, applying lamby/ putty and rubbing down the surfaces, applying one coat of primer and putty. Applying 2 coats of plastic emulsion paint & finishing with roller to get luster finish. Rate to include scaffolding, tools etc complete. Make : Asian/ Dulux ICI

Two coats

Providing and fixing false ceiling at all heights including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50 mm long with 6 mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required

size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre,

with 25 mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer’s specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with :

12.5 mm thick tapered edge gypsum moisture resistant board

Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main “T” runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross “T” of size 24x25 mm made of 0.30 mm thick (minimum) sheet,

1200 mm long spaced between main “T” at 600 mm center to center to form a grid of 1200x600 mm and secondary cross “T” of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including,

required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main “T” runners to be suspended from ceiling using Gl slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm Gl adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge.

12.5 mm thick square edge PVC Laminated Gypsum Tile of size 595x595 mm, made of Gypsum plasterboard, manufactured from natural gypsum as per IS 2095 part | and laminated with white 0.16 mm thick fire retardant PVC film on the face side and 12 micron metalized polyester on the back side with all edges sealed with the face side PVC film which goes around and wraps the edges and is bonded to the edges and the back side metalized polyester film so as to make the tile a completely sealed unit.

Providing and fixing plain jaffri door and window shutters including bright orfand black enamelled M.S. butt hinges with necessary screws 35x10mm laths placed 35 mm apart (frames to be paid separately), including fixing 50x12 mm beading complete with :

Second class teak wood

Forming groove of uniform size in the top layer of plaster as per approved pattern including repair and finishing the groove complete as per specifications and direction of the Engineer-in-charge: 20 mm to 25 mm wide to required depth.

ACOUSTICAL WALL PANELLING :Providing and supplying Acoustical Wall Paneling’ with square edges made of fibre glass substrate 25mm thick and wrapped on the front side with an acoustically transparent and classified for Fire reaction Class A as per ASTM E-84 fixing over Existing tile/ plastered surface-wall panels size:_10ft x 10inch with thickness of 25mm surface coated wooden shades with high quality panel with laying of U channel and I channel to finish the work in all aspect with all fittings like cleats nails screw etc. The rates inclusive wastage, labour and other necessary fittings complete in all Respect Make: anutone Acoustics

Providing and fixing brass curtain rods of wall thickness 1.25 mm with two brass brackets fixed with brass screws and wooden plugs etc. wherever necessary complete.

25 mm diameter.

Providing and fixing in position black out curtain with aluminium extrusion track system over the window opening. Required length of cross over shall be provided to ensure total black out. Curtain wands shall be at required distance from the floor. The cost shall include all related hardware, materials, necessary scaffolding etc.complete.

Providing, Making & Finishing in position Living Room LCD Back Drop Units of overall size 4500 x 2500 mm x (varying depth 450 mm to 400 mm) as per the following specification: i) Frames : Supporting system comprising of factory made metal studs of 51mm x 35mm x 0.55mm formed out of G I sheets placed vertically at 600mm centers. Metal tracks of 51mm x 32mm x 0.55mm in size shall be fixed at floor, door and ceiling levels with staggered joints to avoid through joints. ii) Panels : Providing & fixing 12mm thick BWR Plywood finished to the frames on one side with sheet metal screws .

iii) Cladding with 4mm thick veneer: Providing & fixing cladding to the walls as per the design enclosed with 4mm thick Veneer of approved texture , grains , shade fixed to 12 mm BWR Ply , GI frames fixed to wall fascia as shown in the drawing all complete. iv) Shelves and Drawer units: Providing 75 mm to thick shelves on the Top level and Bottom level of varying depth 450 mm to 400mm. Bottom level to be provided with open draw units of size (600mm to 800mm) x(450mm to 400 mm depth) x 300mm of 3No's of Drawer units 18mm BWR plywood with 4mm veneer.

v) Polishing: All the faces of the veneer and beadings to be finished with minimum 3 coats of melamine spray polish The rate shall be inclusive of all the materials, labour, hardware, polishing transportation, necessary required for the complete execution of the Work

Executive High/Medium Back Chair: - High Back Executive Chair with PU Moulded seat and back, Leatherite or Fabric tapestry on the seat and back, Hydraulic systems, Synchro Tilt mechanism, Chrome plated Twin Casters wheals, Cushion Arms Fix as per drawing approved model suggested by Engineer - In Charge.

18 SEATER CONFERENCE ROOM TABLE (TILTED HORSE SHOE SHAPED)with Table Top as per Design- Providing and making a table of over all size of top as per drawing. It shall consist of 18mm thk. BWP. Ply top as per design finished with 4mm thk Veneer and Clear Table Top Epoxy Resin Coating for Wood Tabletop Surface of approved shade and colour, supported on 8-12 nos numbers of mullion boxes, as per design of made of 18mm thk. BWP finished with 4mm thk veneer of approved shade and Ply inter connected with boxing (as approved by the Engineer in charge) on top(below table top ) and at bottom (on floor level), finished in 20 coats of Clear Table Top Epoxy Resin Coating of approved shade. and Pop Up Conference Table AV Box 2 Power, 2 Data, 2 HDMI -4nos.drawing given by Engineer in charge / instructions given by engineer incharge etc. complete.size 1.2m x 1m -6nos

Providing and Fixing Ceramic Magnetic Board White /Green of required size', Frame Material: Premium Aluminium size 6feet x 4feet

DISPLAY NOTICE PIN-UP BOARDS- Providing and fixing pinup boards. It consist 12mm thick soft boards of good density to be mounted over 12mm thick BWP. ply. The soft board will be covered with a plain fabric (appox Rs.250 /Rmts. of Dark approved Colour) from front and edges. Suitable steam beach moulding 25mm x 25mm size to be fixed on all four sides and will be finished in melamine polish

FULL HEIGHT STORAGE Providing and fixing storage units of Full height (7') height as per drwng. They shall consist of 18mm thk. marine ply top, sides, bottom, shelves and shutters & 12mm thk marine ply for back. The bottom of the storages shall be at 75mm from FFL. The shutter with box type higes of approved make & teak lipping finished with melamine with approved laminate on all the shutter edges. Division of the shutters shall be made equally according to the length of the storages All the external surfaces shall be finished with 1.0mm thk. Laminate of approved make. 18mm thk. marine Ply shelves at 16” interval ( approximately / divided equally) shall be provided. All inner surfaces shall be finished with laminate including the shutters. Rate shall be inclusive of all necessary approved fittings like hinges, locks, 150mm long SS brushed finish handles,tower bolts, and any necessary hardware items.

Providing and placing of Flip Oiart Stand Telescopically adjustable legs with Base Castor Wheelsprovision for height adjustment. 1" thick Prima Magnetic Whiteboard with high scratch-resistance, excellent eras ability and flatness, Integral pen ledge (bottom accessory tray) & universal flip- chart clip included. The stand is fabricated using prime quality CR steel tubes for better corrosion resistance, strength and aesthetics. The stand is fabricated using prime quality CR steel tubes for better corrosion resistance, strength and aesthetics. Material Color is White, Board Size is 36 x 48 Inch.

Supplying, fitting and fixing 10mm thick Laminated wooden Flooring Work conforming to EN13329:2006 with plank size not Iess than 1200 mm X 190 mm (with unilin/tongue-groove locking arrangement) having 0.2mm thk top abrasive layer over a decorative layer followed by a High-density fibreboard (HDF) having density > 850 kg/m3 substrate core over a rasin saturated backing layer and installing through unilin or tongue- groove system (having locking strength not less than 1000 kg/m) over a 2 mm thk underlayer polyurethene foam on polythene sheet 250 micron, over a smooth, flat, hard subfloor free from moisture (< 8%), grease etc.

complete in all respect with requisite accessories like end profile, transition profile, reducer 'T' profile etc. wherever required and preparation of base including all other incidental works as per direction & satisfaction of Engineer in charge.including Cost of labour charge for fitting & fixing of Laminate Floor.( Note: This work should not be executed without specific permission of Engineer In Charge). (AC4 – laminate flooring) Basic rate : Rs 160/ sqft

Supplying Laminate Floor Accessories ( 150mm depth Skirting, End edge, Tmoulding Reducer ) to 10mm thick Laminated wooden Flooring Work conforming to EN13329:2006 with plank size not Iess than 1200mmX 190 mm (with unilin/tongue-groov locking arrangement) having 0.2mm thk top abrasive layer over a decorative layer followed by a High-density fibreboard (HDF) having density > 840 kg/m3 substrate core over a rasin saturated backing layer and installing through unilin or tongue- groove system (having locking strength not less than 1000 kg/m) over a

2 mm thk underlayer polyurethene foam on polythene sheet 250 micron, over a smooth, flat, hard subfloor free from moisture (< 8%), grease etc. complete in all respectas per direction & satisfaction of Engineer in charge. including Cost of labour charge for fitting & fixing of Laminate Floor Accessories. (Note: This work should not be executed without specific permission of Engineer In Charge). AC4 Basic Rate:Rs 200/mtr

Providing and laying at or near ground level factory made kerb stone size 600x125x300 mm of M-25 grade cement in position to the required line , level and curvature jointed with cement motor 1:3 (1 cement :3 coarse sand) including making joints with or with out grooves (thickness of jionts except at sharp curve shall not to more than 5mm) including making drainage opening wherever required, compacting, curing, formwork etc. including bedding of M-10 Cement concrete complete etc .as per direction of Engineer-in- charge

Removing & resetting B S Stone slab pathway in 1:2 Cement Mortor. including filling the joints with 1:2 cement mortoe, pointing, curing etc. complete.

Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.