PROVISION OF INTERLOCKING TILES IN FRONT OF BLDG NO CB 3 AND 12 X RL FIRING AT BERICHHA FFR AT INF SCHOOL UNDER GE MIS MHOW

Amount

Demolition of Stone slabs and tiles of any description or thickness in floors complete all as specified

Surface excavation not exceeding 30cm deep and averaging 15cm deep and getting out in soft/ loose soil complete all as specified

Removing excavated materials (soil) to a distance not exceeding 50 metre and depositing where directed at a level not exceeding 1.50 metre above the starting point complete all as specified

M&L for Moorum /red bajri filling in floor or paving, laid in layers not exceeding 15 cm thick, spread, levelled and rammed including watering as required complete all as specified .

M&L for plain cement concrete 1:2:4 type B0 using 12.5mm graded stone aggregate as in mud stops complete all as specified

M&L for plain cement concrete 1:4:8 type D2 using 40mm graded stone aggregate as in foundation, filling and mass concrete and base of floor complete all as specified

M&L for precast cement concrete 1:2:4 type B1 using 20mm graded stone aggregate as in kerb stone / kerb block ,machine pressed ,bul lnosed shape at top as directed and finished the surface even and smooth including necessary form work /moulding ,fixing, jointing kerb block in cement mortar (1:4) complete all as specified

M&L for machine pressed rubber moulded coloured precast concrete interlocking paver block (glossy finished) any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade, including joints filled with sand and stone dust 50mm thick as in levelling course of interlocking complete all as specified

M&L for machine pressed rubber moulded coloured precast concrete interlocking paver block (glossy finished) any shape and size confirming to IS 15658-2006 of 80 mm thickness, M-40 Grade, including joints filled with sand and stone dust 50mm thick as in levelling course of interlocking complete all as specified

Excavation in trenches n.exc 1.5m wide and n.exc 1.5m in depth for foundation or for shafts, wells, cespits, manholes pier hold etc n.exc 10 Sqm on plan and n.exc 1.5m in depth and getting out in hard/dense soil, complete all as specified and directed.

Excavating over areas not exceeding 1.5 m deep and getting out in hard/dense soil complete all as specified

M&L for hard core with broken stone or aggregates of gauge not exceeding 63mm ,deposited,spread and levelled in layers not exceeding 15 cm ,watered and rammed to a true surface complete all as specified

M&L for plain cement concrete 1:3:6 type C2 using 40mm graded stone aggregate as in foundation, filling and mass concrete and base of floor complete all as specified

M&L for use and waste of formwork to sides of concrete foundations, footings, bases of columns, raft and beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter finished fair complete all as specified

M&L for RCC M-25 (Design Mix concrete) using 20 mm graded stone aggregate as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified..Note:Reinforcement shall be measured and paid separately under relevant item.

M&L for use and waste of formwork to sides of pillars, posts, struts, piers, columns and stanchions, finished fair complete all as specified

M&L for RCC M-25 (Design Mix concrete) using 20 mm graded stone aggregate as in Columns, pillars, piers, posts and struts complete all as specified .Note:Reinforcement shall be measured and paid separately under relevant item.

M&L for brick work with sub class 'B' bricks straight or curved on plan exc. 6.00m mean radius built in cement mortor 1:6., etc complete all as specified

M & L for use and waste of formwork to sides and soffits of floor or roof beam, beam hauchings, bands, girders, bressummers, lintels, etc finished fair surface complete all as specified

M&L for RCC M-25 (Design Mix concrete) using 20 mm graded stone aggregate as in beams, bands, cantilvers, bressummers, lintel, chajjas, etc over 1.5m span complete all as specified. Note:Reinforcement shall be measured and paid separately under relevant item.

M&L for 75mm thick plain cement concrete 1:3:6 type C1 using 20mm graded stone aggregate as in floor / plinth protection, finish the surface even and smooth with using extra cement including filling the expansion joints with bitumen filler / filler boards and necessary form work etc complete all as specified and as directed.

M&L for use and waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work, not exceeding 200mm thick (horizontal or sloping), etc for rough finished surface of concrete complete all as specified

M&L for RCC M-25 (design Mix concrete ) using 20 mm graded stone aggregate as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like, etc complete all as specified .Note:Reinforcement shall be measured and paid separately under relevant item.

M&L for rendering 15mm thick in cement mortar 1:4 on fair faces of brick or concrete surfacemixed with liquid water proofing compound @ 200 ml per bag finished even and fair without using extra cement complete all as specified Note:- Liquid water proofing compound shall be measured and paid separately under relevant item

Supply only Liquid Water proofing compound PIDIPROOF LW+ of Dr FIXIT or other equivalent as approved by GE

M&L for preparation of new plastered surfaces of walls and applying two coats of Acrylic Smooth exterior paint of required shade @ 1.67 litre / 10 sqm) over and including a coat of primer @ 2.20 kg/10 sqm of same make base over a coat of putty all as specified and directed.

M&L for high strength steel deformed TMT bars 10 mm dia and over, cut to length, bent to shape required including cranking, bending spirally and binding with and including mild steel wire (annealed) not less than 0.90 mm dia, etc complete all as specified

M&L for Mild steel TMT bars 5mm dia and over upto and including 10mm dia as in strriups,spaces,nibs and binders binding with and including mild steel wire (annealed) not less than 0.90 mm dia, etc complete all as specified

S&F 0.50mm thick (including coated thickness) pre-colour pre- profiled (Galvalume/zinkalume) sheets of required colour and design having tensile strength of 550 Mpa as in roof sheeting/sunshade/ wall cladding, north light curves, fixed with zinc coated self drilling fastener including EPDM washer complete laid with one corrugation side laps and min 150mm end lap laid to slope all as per manufacturer / profile maker instruction complete all as specified and as directed.

S&F Mild steel Hollow ,Joist, channel, angle, tee or tubular Section work in tubular trusses, purlins, rafter, tubuler column, where connected common rafter and running rails fixed with angle cleat or other connection plates including special shaped washer etc, complete using ERW or induction butt welded tubes conforming IS-4963,1993 and IS-1161-1979 grade ST-240 complete all as specified

S&F mild steel plates (Plain or chequered) as in shoe plate, base plate and gusset plates forming holes for roof frame work, trusses, rafters etc of grade Fe 410 WA. complete all as specified

S&F mild steel framed work as in doors or gates of angle iron, door frame or other section with gusset plate, rails, braces etc complete, drilled for fixing of steel sheeting or other covering etc, to prepared for hanging or sliding with including either hooks and hinges also fastening grills, grating, hold fast of doors and windows chowkat etc, with ends of bars shouldered and or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walkways; railings; framework of water tanksand fixing and similar work confirming to fe 290 Gde E-165 complete all as specified

S&F Stainless steel railing includng all fixing arrangement complete all as specified and directed by Engineer-in-Charge

M&L for Machine cut Kota stone slab flooring 20 mm thick (+ /-2mm thick ) of 58cm x 58cm in size (or nearest size as available in the market) laid over and including 15mm thick screed bed in cement mortar 1:4 and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing to mirror finish, complete all as specified

All as per item No 34 above but as in skirting/ dado etc with and including 10mm thik backing coat in cement mortar 1:4 on wall complete all as specified

M&L for preparation of newly steel surface of any description, over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified

M/S DADISA CONSTRUCTION

NIDHI CONSTRUCTION

ss construction

Goyal Construction

APconstruction

sunrise enterprises

M/S UnitedConstruction