Construction of 2 nos F type staff quarter Building at PHC Baranga under Patrapur Block in the district of Ganjam

Earth work in excavation of foundation in hard soil within initial lead of 50m and lift of 1.5m including dressing & leveling the bed & depositing the excavated earth at places away from work site with all leads & lifts including Cess and cost of all labour T&P & dewatering if required for the work etc. complete and as per specification and direction of Engineer-In-Charge

Approach road

Providing & filling with excavated earth materials including watering ramming to proper density with all leads and lifts including cost of all labour T & P& Cess required for the work etc complete as per specification & direction of Engineer-in-charge.

Supplying and filling in foundation with course sand well watering and ramming with cost, conveyance, royalityof all materials, and labour with T&P required for the work including Cess etc complete. (Measurement will be taken on finished compacted section only) as per direction of Engineer-in-Charge.

Approach road

Providing cement concrete of proportion (1:3:6) using 40mm size clean hard black granite crusher broken metal of approved quality and from approved quarry including hoisting lowering and laying concrete in layers not exceeding 15cm (6") thick to the required level ramming, watering & Curing etc. complete including cost & conveyance of all materials with all& royaltiesEMF & DMF Additional charges and all labour with T&P required for the work with Cess etc, complete including dewatering if required as per direction of Engineer In Charge.

Approach road

Providing cement concrete of (1:2:4) using 12mm size hard granite crusher broken metal of approved quality and from approved quarry including cost, conveyance, royalty, , labour, Cess & T&PEMF & DMF Additional charges & all other materials required for the work complete as per the direction of the Engineer-in-charge Approach road

Fly Ash brick masonary in Cement Mortar (1:6) in foundation plinth using-fly ash-brick of 25cm X 12cm X 8cm size having a crushing strength in between 75kg to 100 kg per Sq.cm with dimensional tolerance ± 8% including splays cutting circular moulding chamfering & corbelling watering and curring for 7days after immersing the bricks in water for six hours before use etc. complete including cost & conveyance of all materials & labour required for the work with all& royalties with all T&P & Cess etc, complete in all respect as per the direction of Engineer-in-charge. Main Wall and Steps (Foundation & Plinth)

RCC work of grade M-25 having a minimum compressive strength in work text of 200Kg/cm2 in15cm cubesat 28daysafter mixing and tests conducted using 10mm to 20mm size (20mm not to exceed 25 percent) crusher black broken granite stone chips of approved quality and from approved quarry including hoisting,lowering and laying concrete by using vibrators watering and curing for four weeks centering and shuttering and finishing the exposed surface smooth to receive painting or white or clour wasing providing grooves or beads where neCessary including cost, conveyance,and royalties of all materials and labour required for the worketc, complete with all T&P and CessEMF & DMF Additional chargesin all respect but execludingcost of reinforcement MS rods or tor steel and binding wires of 18 to 20 guage and labour charges etc, complete as per specification and direction of Engineer-in-charge.

Column Base Footing

Column in Superstructure/Beam

Ground Floor

First floor

Head Room

Plinth Band

Lintel Band

Ground Floor

First floor

Head room

Chajja

Ground Floor

First floor

Head room

Stair case

Ground Floor

First floor

Roof Slab

Ground Floor

First floor

Head Room

Shelves

First floor

Straightening HYSD bar cutting bending,binding, cranking hooking, welding jointing (if required) the M.S.Rods or Tor steel & binding wires and binding tying the grills hoisting lowering & placing in proper position as required for RCC works with cost conveyance &of M.S. Rods or Tor steel & binding wires of 18 to 20 gauge and labour with all T&Prequired for the work with Cess etc,complete in all floors (weight of binding wire will not be considered for payment and payment will be made on weight of M.S. Rods or Tor steel only) etc. in all respects as per the direction of Engineer-in-Charge. Ground Floor

First floor

Head Room

Providing 25mm thick grading Concrete (1:2:2) on roof slab using 6mm size hard crusher broken chips with chicken mesh including cost, conveyance, royality EMF & DMF Additional charges of all materials taxes of all T&P with cess etc, required for the work etc complete in all respect as directed by Engineer-in-charge.First Floor

Head Room

Fly Ash brick masonary in Cement Mortar (1:6) in Superstructure plinth using-fly ash-brick of 25cm X 12cm X 8cm size having a crushing strength in between 75kg to 100 kg per Sq.cm with dimensional tolerance ± 8% including splays cutting circular moulding chamfering & corbelling watering and curring for 7days after immersing the bricks in water for six hours before use etc. complete including cost & conveyance of all materials & labour required for the work with all& royalties with all T&P & Cess etc, complete in all respect as per the direction of Engineer-in-charge. Superstructure Ground Floor

First floor

Head Room

Fly Ash brick masonary in Cement Mortar (1:4) in Superstructure plinth using-fly ash-brick of 25cm X 12cm X 8cm size having a crushing strength in between 75kg to 100 kg per Sq.cm with dimensional tolerance ± 8% including splays cutting circular moulding chamfering & corbelling watering and curring for 7days after immersing the bricks in water for six hours before use etc. complete including cost & conveyance of all materials & labour required for the work with all& royalties with all T&P & Cess etc, complete in all respect as per the direction of Engineer-in-charge. Superstructure Ground Floor

First floor

12mm (1/2") thick cement plaster in C.M (1:6) on brick masonary finsihed smooth surface after racking out the joints including watering & curing for seven days with cost and conveyance of laobur with T&P required for the work with all , Royalty, DMF, EMF & Additional Charges & Cess etc, complete in all floors as per direction of Engineer-in-charge. Ground Floor

First floor

Head Room

16mm (5/8") thick cement plaster in C.M. (1:6) finished smooth to inside surface of 9" thick brick wall after racking out the joints including watering & curing for seven days with cost and conveyance of laobur with T&P required for the work with all , Royalty, DMF, EMF & Additional Charges & Cess etc, complete in all floors as per direction of Engineer-in-charge.

First floor

Head Room

12mm (1/2") thick cement plaster in C.M (1:4) on brick masonary finsihed smooth surface after racking out the joints including watering & curing for seven days with cost and conveyance of laobur with T&P required for the work with all , Royalty, DMF, EMF & Additional Charges & Cess etc, complete in all floors as per direction of Engineer-in-charge. Ground Floor

First floor

6mm thick cement plaster in cement mortar (1:4) to ceilling of roof lintel and chajjas after chipping and chiselling the same and clearing the surface by wire brush finished smooth watering and curing for 7 days including cost,conveyance of all materials and labour with T&P & Cess required for the work withand Royalty, DMF, EMF & Additional Charges etc complete in all respects in all floors as per direction of Engineer-in-Charge.

First floor

Supplying, fitting & fixing of 10 mm thick & size of 600x600 mm Vitrified floor tiles (GVT) of (colour /printed) with veilcraft (VC) shield (Scratch free/stain free) with water absorption limit between 0.08% to 3% and conforming to IS : 15622:2006 (Group B Ib) laid on 20 mm thick cement mortar (1:4) and filling joints with white cement of approved quality with cost, conveyance,Royalty, DMF, EMF & Additional Charges ,of all materials & labour T&P and Cess&T &P etcrequired for the work etc, complete in all respect as per specification and direction of Engineer-in-charge. Ground Floor

First floor

Supplying, fitting & fixing Granite tiles (.01 to .04) fixing in floors treads (or) steps and landing on 25 mm thick bed of C.M (1:1) (1 cement : 1 sand) jointed with neat cement slurry mixed with pigment to match the shades of the tiles includingpolishing complete including cost of tiles watering & curing for 7 days with cost, conveyance,Royalty, DMF, EMF & Additional Charges ,of all materials & labour T&P and Cessrequired for the work etc, complete in all respect with surface finishing with polishing materials as directed by Engineer-In-Charge.

First floor

Supplying, fitting & fixing of 10 mm thick & size of 600x600 mm 600x600 mm Vitrified floor tiles (GVT) of (colour /printed) shield( Scratch free/stain free) with water absorption limit between 0.08% to 3% and conforming to IS : 15622:2006 (Group B Ib) in dados skirting and risers of steps on 12mm thick CP (1:3) jointed with neat cement slurry mixed with pigments to match the shade of the tiles with cost, conveyance,Royalty, DMF, EMF & Additional Charges ,of all materials & labour T&P and Cess&T &P etcrequired for the work etc, complete in all respect as per specification and direction of Engineer-in-charge.

First floor

Supplying, fitting and fixing in position well dressed and well seasoned sal wood work framed and fixed (wrought and put up) in choukaths for doors, windows and ventilators including cost of iron work and coal taring 2 coats to wall side faces of choukaths including cost of coaltar, cutting grooves and mending to sizes where neCessary with cost and conveyance Royalty, DMF, EMF & Additional Charges andof all materials and labour, Cess with T&P required for the work etc. complete in all respect as per direction of Engineer-In-Charge.

First floor

Priming One coats with any approved primer to new wood work and iron work including cost of the primer and paint sand papering polishing the surface with cost, conveyance and taxes of all materials and Labour, cess, T&P required for the work etc complete as per direction of the E.I.C

First floor

Head Room

Finishing wall surface of walls with Acrylic wall putty (water based) of approved make and finished smooth and even surface to receive painting including cost of scaffolding staging charges with cost of all materials taxes labour T&P with CESS etc complete as per direction of Engineer-in-Charge.

First floor

Head Room

Wall painting two coats with plastic Emulsion paint of approved quality & shade on new work to give an even shade with brush to interior walls surface after cleaning the surface including cost of plastic emulsion paint with cost, conveyance and taxes of all materials and labour with T&P required for the work with CESS etc complete as per direction of Engineer-in-Charge.

First floor

Head Room

Wall painting two coats with any approved weather coat paint of approved quality & shade on new work to give an even shade with brush to interior walls surface after cleaning the surface including cost of plastic emulsion paint with cost, conveyance and taxes of all materials and labour with T&P required for the work with CESS etc complete as per direction of Engineer-in-Charge.

First floor

Head Room

M. S Pannelled Door double leaved shutter with M.S frame Over alll size frame- 1980mm (H) x 1070 mm (W) made out of the following materials conforming to relevant Indian Standard specification. Frame -35x35x6mm M.S angle, shutter style- Top & Bottom rail 25x25x3mm MS angle, Door pannel-1.0mm C.R , sheet. pannel stiffener covering width of each leaf- 19x5mm, MS Flats 3nos on each leaf. Hinges size 100mm 6nos (3no each sides) bought out as per ISS. Hold fast- 35x35x6mm MS Angle 175mm length bifuricated- 4nos. Aldrop- 2nos bought out as per ISS,

Head Room

Supplying & providing, of M.S. window grill made out of M.S flat conforming to IS No -1977/1996 as per the design approved with cost, conveyance &of all materials & labour with T&P & Cess in all respects as directed by the Engineer-in-Charge.

First floor

Labour for fitting,fixing of M.S.grills as per approved design including cost of screws with cost of all labour, T&P and CESS required for the work etc, complete excluding cost & conveyance of M.S.Door/Window in all respects as directed by Engineer-In-Charges.

First floor

Labour for fitting,fixing of Gate as per approved design including cost of screws with cost of all labour, T&P and CESS required for the work etc, complete excluding cost & conveyance of M.S.Door/Window in all respects as directed by Engineer-In-Charges.

Head Room

Supplying, fitting and fixing of 32mm thick flush door shutter with approved quality of 30mm thick BWR block board pasted with 1mm thick sunmica on both side of approved design and quality including cost of all door fittings and fixtures etc. complete as per direction of Engineer-in-Charge.

First floor

Supplying , fitting and fixing of two track UPVC sliding window of approved make with 6mm thick glass of approved quality complete with frame, shutters and all fitting and fixtures

First floor

Providing and fixing of fixed Ventilators of approved make to be fabricated from roll formed sections made of pre-painted steel (base steel as per IS- 513 of 0.6 mm thick “D” quality, galvanized as per IS-277 with zinc of 120 Gm/Sq.mtr) with paint pecification being with primer of 5-7 microns and finished paint with polyster paint (Black /Pearl white/ Chocolate Brown) of 12-16 microns alongwith the alkyd backer at the back of 5-7 microns and the sizes of outer frame being of 46x52 mm and with all vertical and horizontal mullions are of 46x70 mm and fixed beadings are of 18x25 mm. Section for internal top and bottom frames in the louvered areas should be 18 x 40 mm. Top hung shutter

First floor

Head Room

Supplying fitting of Stainless steel of 304 garde in hand railing using 50 mm dia of 2 mm thick circular pipe with balustarade of size 32 mm X 32 mm X X2 mm in 3 rows in stair case as per approved design and specification buffering polisging etc. including cost conveyance of all materials complete as per direction of the Engineer- in - Charge.

First floor

Painting two coats with approved enamel paints of approved colour, shade over a coat of primer including sand papering, polishing the surface, cost, conveyances of all materials and cost of all labour etc, complete as per specification & direction of E.I.C.

First floor

Head Room

Providing and applying anti-termite treatment by drilling holes of 12mm diametre at a distance of 300mm C/C junction of walls and floor about 300mm apart deep enough to raech the soil below and chemical emulsion (PREMISE, MIDACHLOPRIED 30.5 SC OF BAYER make mixed with 475 litre of water) pumped these holes to soak the soil @ 1.00 liter solution of each hole as per manufacture specification and the holes should be plugged with filling materials labour charges conveyence and all taxes, including hire charges of all amchinaries etc. as per direction of Engineer-In-Charge.

Construction of granular sub-base by providing Gr-IV stone screening, spreading in uniform layer with mortor graded on prepared surface, mxing mix in place method with rotavator at OMC and compacting with vibratory roller to achieve the desired density etc. complete as per clause 401 of MoSRT&H specification for road and bridge work (4th revision) including cost conveyance and Royalty, DMF, EMF & Additional Charges of all materials with all labur T&P Cess etc complete and as per direction of Engineer-in-Charge.

Providing and laying 80 mm thick factory made concrete interlocking paver block of M-30 grade by block making machine with strong vibratory compaction of approved size, design & shape, laid in required colour and pattern over and including 20 mm thick compacted bed of coarse sand, filling the joints with fine sand etc all complete as per the direction of engineer-in charge

Dismantling and removing doors & windows and ventilators including removed of frames, hinges fastering, stacking the same for reuse and removing the debris with a 50m lead with all cost of all labour materials , Cess & T&P etc. complete

Dismentaling and removing RCC chajja shelves,fins and parapet including stacking the useful materials for reuse and removing the debris with in 50mtr lead includingcost of all labour with T&P,Cess required for the work etc complete as per direction of Engineer-in-Charge.

Dismantling and removing 2.5cm (1”) thick artificial stone flooring including stacking the useful materials for reuse and removing the debries within 50m away from work site including cost of all labour with T & P,Cess required for the work as per direction of EIC.

Dismantling and removing R.C.C. columns, beams, slab, staircase, landing lintels including stacking the useful materials for reuse and removing the debris within 50M lead away from work site including cost of all labour with T & P required for the work as per direction of EIC.

Dismantling brick or stone masonry in lime or cement mortar under 3M (10’-0”) height including stacking the useful materials for reuse and removing the derbies within 50m lead from the work site including cost of all labour with T & P,Cess required for the work as per direction of EIC.

Dismentaling and removing 2.5 Cm thick grading concrete from roof slab cleaning the surface lowering and removing and debris with in 50mtr lead including cost of all labour with T&P,Cess required for the work etc complete as per direction of Engineer-in-Charge.

Please Enable Macros to View BoQ information