REPAIR TO PATHWAYS, CURVE STONE, PASSAGE, PLINTH PROTECTION, SAUCER DRAIN, STORM DRAIN, COMPOUND WALL ETC AND MISC B/R NATURE WORK IN THE AREA OF AGE B/R-II UNDER GE WEST DELHI CANTT-10

Amount

Demolition/Dismantling of Brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc., but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and as directed.

Demolition of cement concrete (un-reinforced) of any description and in any position, including removal of rubbish out side complex (MOD land) , complete all as specified and as directed.

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.

Demolition of Stone slabs and tiles complete all as specified and directed in any description or thickness in floors, aprons etc laid bedded and pointed in any mortar complete all as specified and directed.

M&L for brick work with sub class 'B' old size, burnt bricks straight or curved on plan exc 6m mean radius and built in CM 1:6 complete all as specified and directed.

M&L Brick work with sub class 'B' brick straight or curved on plan to any radius in half brick thick wall built in CM 1:4 etc, complete all as specified and directed.

Taking down cement plaster or any description including raking out joints, hacking for key, scrubbing down with water etc. and removal of debris to a distance not exc 50 mts and depositing, complete all as specified and directed.

M&L for 15mm thick rendering on concrete surface/brick surface in cement mortar (1:4) surface finished even and smooth complete all as specified and directed.

Dismantling posts or struts embedded in concrete, brickwork, masonry etc. (wood, steel or R.C.C.) any section, including taking out embedded portion and making good disturbed ground complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

M&L PCC (1:4:8) type D-2 using 40mm graded stone aggregate as in foundations, mass filling , sub base and the like complete all as specified and directed.

M & L for 75 mm thick plain cement concrete 1:3:6. type C-2 (using 40mm graded aggregate) as in floors/pavings/plinth protection etc,finished even and smooth without using extra cement grooves filled with bitumen mastic filling of mix(1:2) (bitumen and sand) complete all as specified and directed.

M&L for glossy finished Coloured Cement concrete chequered tiles 30cmX30cmX25mm thick machine pressed; set jointed and pointed in neat cement slurry in floors over 20mm thick screed bed in CM 1:6 and cut and pointed with white cement and pigment complete all as specified and directed.

Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed.

Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and directed. Note:-Kerb stone size 300mmx150mmx300mm.

S&F Rolled mild steel work in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.

M&L for Rolled mild steel Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing conforming Fe.290.Gde-E-165 complete all as specified and directed.

S&Ffor Rolled mild steel Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walkways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165.

M&L for 1.25mm thick Mild steel, plain, black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitered angles, etc. complete all as specified and directed.

S&F for expanded metal, weight N exc 4 kg per sqm, cut to length, bent to shape required, welded to steel members/frame where required in any position (Ventilator etc.) and at any height complete all as specified and directed.

S&F in repair galvanised, 2 strand , steel barbed wire 2.24 mm dia barbed with 2mm dia barbs at 75 mm spacings and straining and fixing to any type of standard rails staining bolts, incl securing or tying at crossings with and provn of galvanised mild steel wire, staples or steel pins, etc. as directed ( each line wire to be measured) complete all as specified and directed.

S&F in repair Concertina Coil fencing with punched type concertina coil 600mm dia 10m openable length, having 50 nos rounds per 6m length, thickness of wire 2.50mm, thickness of strip .50mm(120GSM) up to 3m height of wall with existing angle iron and tied with GI staples and GI clips to retain horizontal complete all as specified and directed.

M&L for machine cut kota stone slab flooring 18-20 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete including 15 thick screed bed in CM ( 1:6) complete all as specified and directed.

M&L Kota stone slab 18-20 mm thick in riser of steps, skirting, dado and pillar laid over 15mm thick rendering in CM 1:4 and jointed with ditto as per above item no 23. complete all as specified and directed.

M&L for 18-20 mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars window-cills, cooking platforms and like in including 15mm thick screed in CM (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite incl polishing and rounding of edges complete all as specified and directed.

M&L for cement concrete 1:2:4 type B1 (using 20mm graded stone aggregate) as in blocks for hold fast, coping, benching etc. including weathering, slightly rounded or chamfered angles or throating including form work to concrete surfaces complete all as specified and directed.

M&L for preparing previously untreated steel surfaces of any description over 10cm width/girth and applying two coats of synthetic enamel paint over one coat of red oxide primer including preparation of surface complete all as specified and directed.

M & L for preparation of old painted steel surfaces of any description not otherwise described, over 10cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and directed.

M&L for preparation of new surfaces and applying two coats of cement base paint over a coat of priming plastered and other surfaces with alkali resistant priming paint on external surfaces of walls complete all as specified and directed.

S & F factory made 18mm thick WPC railing combining WPC board/Fancy designer type grating and WPC frame 100% solid WPC (wood polymer composite) railing of required length and of 2' to 2.5' height , comprising of virgin PVC resin of K value 58-60 (Suspension Grade) , Calcium Carbonate and natural fibers (Wood Powders/rice husk//wheat husk) and non toxic additives, made from single extrusion process, WPC foam board with having minimum density 650kg/cbm and WPC frame having minimum density 780kg/cbm manufactured by "RAJSHRI" an ISO 9001-2015 certified Company, having good screw holding capacity (screw withdrawal strength of 2000N (Face) & 1100N (Edge) , Minimum comprising of 50N/mm2, Modules of elasticity 850N/mm2 and resistance of speed of flame of class A category with property of being termite/Borer free water /Moisture proof and fire resistance. For WPC railing WPC jali to be fixed with WPC frame of size 75x50mm with necessary supporting lengths at vertical as well as horizontal at wall frames to be fixed with 3"x3" GI 'L' or SS cleats to support vertical frame lengths including demolition /dismantling of existing RCC jallies with frames complete all as specified and as directed. (Note : The said item shall be fixed over boundary walls/roof tops and in any other positions as per requirement at site)

Excavating in post holes (or similar holes) each n exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm complete all as specified and directed.

Supply only Chain link MS galvanised fencing of mesh size (75X75X4)mm complete all as specified and directed.

Fixing only Chain link MS galvanisd fencing, any size or type including linewires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire complete all as specified and directed.

M&L for Mild steel screw bolts (machine made) 11mm to 15mm dia of neck with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut exc 5cm but n exc 10cm long complete all as specified and directed.

M&L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, ending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M&L for Cement concrete work in pavement/ hard-standing of flexural strength 40 kg/per square centimetre in field using 400 kg of cement per cubic metre, thickness of concrete 25 cm or less complete all as specified and directed.

M&L for Forming 12mm thick Expansion joints filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound, Grade ‘A’ for 100mm thick slab ccomplete all as specified and directed.

S&F SFRC manhole covers 750mm x 750mm, 80mm thick with frame medium duty, M-35 grade complete all as specified and directed.

S&F factory made SFRC 75 mm thick manhole cover with frame, circular in shape having internal dia width 560mm and fixing over brick manhole with CM (1:4 ) or cement concrete (1:2:4) complete all as specified and directed.

S&F SFRC manhole covers and frame medium duty overall size 1000mmX500mmX80mm thick factory made and test load 10 tonnes (MD-10), strength including necessary reinforcement as per IS : 1726-1991 complete in all respect as specified and directed.

S&F factory made RCC GT Cover of Size 450mm x 450mmx 50mm thick or as per site requirement with 01 No handle and 150mm dia notch at one side of cover at center at 500mm long side complete all as specified and directed.

S&F replacement precast fiber reinforced cement concrete drain cover including grove and hook arrangement for lifting and placing in position and sides covered by MS sheet medium duty of overall size 1000mmx500mmx75mm complete all as specified and directed.

S&F replacement precast fiber reinforced cement concrete drain cover including grove and hook arrangement for lifting and placing in position and sides covered by MS sheet medium duty of overall size 500mmx500mmx75mm complete all as specified and directed.

Cleaning of drain having inner width upto .6m and depth upto 1.2m by removing mud , garbage, debris, sludge, vegetation etc. having average depth .45m through manually or mechanically removal of spoils/sludge out side MOD land, complete all as specified and directed.

M&L for site Clearance in soft/loose soil and complete all as specified and directed. Note: the quoted rate is deemed to include for the cost of cutting/scrapping of grass /vegetation and/or small shrubs etc. where ever required and directed by Eng in charge.

M&L for two coats of synthetic enamel paints (lasting water based exterior paint) over one coat of primer including preparations of surfaces on new cement concrete surfaces etc. complete all as specified and directed.

M&L for preparation of old decorated wall surfaces and applying one coat of 100% premium exterior acrylic emulsion (Apex paint) complete all as specified and directed.

M&L for preparation of old decorated wall surfaces and applying one coat of cement based paint complete all as specified and directed.

The new hut furnitures (BID ID -3379375)

L G BUILDERS (BID ID -3379790)

M/s VINOD KUMAR SHARMA (BID ID -3379785)

imran construction company (BID ID -3379720)

M/s Puja Construction Company (BID ID -3379183)

Shivom Projects Private limited (BID ID -3379861)

M/S Yamin (BID ID -3375000)