MADURAI DISTRICT CONSTRUCTION OF FIRST FLOOR TO KAMARAJAR HOSTEL BUILDING AT T KALLUPATTI RIRD CAMPUS UNDER SCHEME OF CENTRE OF EXCELLENCE AND STRENGTHENING OF RIRD AND PR

Amount

Dismantling Clearing the pressed tiles and weathering course away and carefully Stacking Material Etc.complete in (SI No 38B)

Dismantling Clearing the Reinforcement Concrete away and carefully Stacking Material etc.complete (SI No.38)

Dismantling Clearing the Brickwork in Cement Morter Away and Care fully Stacking Material etc complete in( Si No:15)

Earth work Excavation for Foundation in all soils and Sub Soil to full depth as may be directed except in hard rock requiring blasting but inclusive of shoring strutting and requiring the sides of foundation.

Supplying and Filling foundation and basement with filling sand in layers not more than 15cm . Thick well ramed, watered and compacted Complete complying with stanard specification.

Re-Filling in Foundation and basement in excavated earh layers of not more than 15 cm thick inculding all labour chasrges etc.complete

Cement concrete 1 : 4 : 8 mix using 40mm HBG metal for foundation including watering wherever necessary and laid in layers of not more than 15cm thick., compacting etc., complete

Supplying and Fabricating and placing in position MS steel or Ribbed Tor Steel for all Reinforced Cement Concrete works as per the design given including cost of steel and binding wire in all floors etc, Complete

Cement concrete 1:1.5:3 using 20mm ISS HBG metal for all RCC item of works excluding cost of Rein forcement and fabricating charges, centering and shuttering but including curing and providing fixtures like fan clamps in the RCC floor or roof slabs wherever necessary and bearing surfaces of walls , sides and bottom of the slabs, beams etc.,

Below Ground level

Ground Floor

First Floor

Head Room

Water tank

Supplying & Erecting centering for sides & soffiots including necessary supports & strutting upto 3.29m height for plane surfaces in all floors with all cross bracings using mild steel sheets of size 90 x 60cm & 10 gauge stiffened, welded with steel angle of size 25 x 25 x 3mm for boarding laid over silver oak joists(Country wood) of size 10 x 6.5cm spaced @ about 90cm c/c and supported by casurina props of 10 - 13cm dia. spaced @ 75cm c/c etc., complete

Basement Level

Ground Floor

First Floor

Head Room

Water tank

Brick work with cement mortar 1:5 mix using country bricks of size 83/4"x43/8"x23/4" for foundation and basement and superstructure inculding cost and conveyance of all materiales curing etc ,complete.

Ground Floor

First Floor

Head Room

Weathering course concrete using best quality broken brick jelly of size 20mm in pure slacked lime over the RCC roof slab in th proportion of brick jelly to lime being32:12.5 by the volume and laid over a single layer and consolidated to the required dsesign & finished thick. beating the concrete with wooden beaters of approved pattern, keeping the surface contantly wetted with sprinking lime & jaggery water as per standard specifications etc., complete as directed by the departmental officers. Rate for 10m3

Finishing the top of roof with one course of machine pressed tiles of size 23 x 23 x 2cm of approved quality laid in CM 1:3, 12mm thick. With water proofing compound confirming to IS by 2% by weight of cement used & the joint pointed neatly to full depth of tiles with the same water proofing compound mixed with cement mortar, Red oxide etc.,

supplying and fixing of 40mm thick cuddapah slab inculding cost and Conveyance of all labour charges etc complete

Manufacturing, supplying and fixing of cupboard shutter using country wood (kongu) frame of 100 m x 32 mm thick for outer frame horizontal and vertical memebers. The shutter frame of size 75 x 32 mm of country wood scantling (Horizontal 3 nos., Vertical 2 nos., of reach shutter) with 8 mm thick both side prelaminated particle board (exterior grade) shutter.The shutter are fixed to the frame with requied 6 nos., o alumium hings 100 x 30 mm 2 nos., 'D' type alumium hadle 100 mm 2 nos., of aluminum tower bolts 75 x 10 mm 2 nos., of cupboard lock etc., the country wood frame shall be painted two coats with synthetic enamel paint over one coat of wood primer.

FRP Door Shutter with FRP Door Frames made out of FRP Shutter of 3 mm thick Of Over all size 65mmx50mm With rebate suitable reinforced using MB angle /Flats,Cost of holdfasts and Solid Core FRP Shutter Panel of 5 mm Thick and hollow core Frames of 3 m Wall thickness for styles and rails etc.of Sizes Specified by Engineers in SI No 116a inculding built Lock

solid Fibre door Shutters using 19 Gauge 19 mm ms square tubes or styles and outer frames.15 mm Ms Square tubes For top lock and bottom rails. The Steel tubes shall be Coverd with 5 mm thick solid pvc sheets.Shutter using 5 mm thick Solid Pvc sheets for panelling shall rigidly fixed in position inculding necessary furniture and Fittings. The over all size of stylea shall be 50mmx30 mm .the over all size of top rail,lock rail and bottom . Solid Panel Pvc door With Frame in Si No;114 a

Providing and Fixing Window from all Formed Sections made of galvanized Steel Powder coated (base steel as per IS 513 D quality galvanized as per IS 277 with Zinc Of 120 grams / Sqm .) With total coated thickness of 0.58 mm incluting costand couneyance of all materials to site and labour charges etc.., In SI NO:238

Pre-painted Galvanized Iron Fixed Louvered Ventilators With glass and Grill. Providing and Fixing louvered ventilator fabricated from rool Formed Sections made of galvanized steel Colur Coated Ventilator incluting costand couneyance of all materials to site and labour charges etc.., in SI No:241

Finishing the exposed surface of RCC item of work such as slabs, beams, sunshade, facia, canopy slab, staircase waist slab, landing slab etc., with CM 1:3, 10mm thick etc., complete complying with standard specifications.

Plastering with CM 1:5, 12mm thick.in all floors including curing etc., complete complying with standard specifications and as directed by the departmental officers

Providing the following thickness of Antiskit tiles complete complying with standard specification as directed by dept officers etc..,

Paving the floor with scratch proof vitrified tiles (0.6x0.6m)of any colour and any size laid in CM 1:3, 20mm thick. And pointing with white cement 0.4 Kg per sqm mixed with colouring pigment to siut the colour of the tiles including finishing the joints neatly complying with the standard specifications

Dadooing walls with Glazed tiles of any colour and any size laid in CM 1:2, 10mm thick. and pointing with white cement 0.4 Kg per sqm mixed with colouring pigment to siut the colour of the tiles including finishing the joints neatly complying with the standard specifications.Colour Glazed tiles 150x150x6 mm

Supplying and fixing in position White glazed European water closet with PVC low level flushing tank 10 litre capacity and approved make with 100mm 'P' or 'S' trap with double flapped rigid PVC. Seat cover with C.P. brass hinges including all fittings complete complying with standard specification. (SR Work) in Si No130.1

Wash hnd basin of Size 550x400 mm With all accessories such as cast Tron Brackets ,32 mm dia cp waste coupling ,Rubber Plug and Chain,32 mm dia b Class GI Waste Pipe 15 mm GM Wheel value in Si No.169 (I)

Supply and Fixing of Mirror of Size 0.60x0.45 inculding all labour chasrges etc .complete

To wards the cost and supply of CPVC sanitary pipe with etc

110mm dia Cpvc pipe

110mm diaC pvc tee with door

110mm dia Cpvc air cowl

110mm dia CPVC Bend

Towards the cost and supplying of man hole cover & chamber cover slab etc,.in SI No266(a)

Towards the labour charges for laying of sanitary line and cover slab

Painting two coats with ready mixed Plastic emulsion of first class quality paint and of approved colour over a priming coat ,inculding through scrapping, clean removal of dirt etc. complete and inculding necessary plasterof paris , putty whereever required .

Distembering two coats with best approved distember including cost and conveyance of all materials to site and all labour charges etc complete

Wiring with 2x1.5 sqmm (22/0.3) PVC insulated SC.unsheathed Cu. Conductor of 1100 V grade in suitablePVC rigid pipe on wall and ceiling with PVC accessories and with TW switch box and 5A F.T. switch withpainting of suitable Colourfor open PVC light point / fan point (For electronic regulator) (6points per coil) in SD No:24

Wiring with 2x1.5sqmm (22/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100 V grade in suitable PVCrigid pipe on wall and ceiling with PVC accessories with 150 x l00 x 113 mm TW switch box for 5 A 3 pin noninter locking CS plug with painting of suitable colour with continuous earth wire connection of 14 SWG TC wire for open PVC plug point.in SI No.40

Wiring with 2x4 sqmm(56/0.3) PVC insulated SC unsheathed Cu.Conductor cable of 1100V grade in suitable pipe onwall and ceiling with PVC accessories with 150 mm x 100 mm x 63mm TW switch box for 15 A 3 pin non inter lockingWall socket with 15A Flush type switch with painting of suitable colour, with continuous earth wire connection of 14 SWG TC wire for open PVC power plug point. in SI No39

Wiring with 2x1.5sqmm (22/0.3) PVC insulated unsheathed SC Cu. Conductor of 1100V grade in suitable Prigid pipe on wall and ceiling with PVC accessories with TW switch box with 5A F.T. switch inflush with wall,covered with hylum sheet of 3mm thick with painting of suitable colour for open PVC light / fan point (Forelectronic regulator) (5 Points Per Coil)SDR NO;24

Supply and fixing of single box type 4'40 W flu fitting complete with copper choke and condensor with TWround blocks on wall or ceiling with flu tube with PVC unsheathed Copper leads from terminals to the fitting. in SD NO:88

Supply and fixing of 4' 40 W Twin Mirror optic suspension type fitting (Philips / Crompton / Wipro) complete with louvers cover complete with copper choke and condensor with conduit pipe suspension, with PVC unsheathedCopper leads from the terminals to the fittings with flu. tubes. SD NO:96

Supply and fixing of fancy glass shade and 11W CFL for BH point. CFL.in SD NO:80

Supply and fixing of 1200 mm (48") AC ceiling fan complete with stepped electronic 300W regulator with 300mmdown rod on the existing clamp. SD NO:110

Supply and fixing of 300 mm (12") sweep (light duty) AC exhaust fan complete without provision of hole in the wall in SD No .115

Supply and fixing of TNEB meter Board suitable for 32A Single Phase service connection with 32A Fuse unit(500V) 32A neutral link and earth link (1" x 1/8" Copper flat) on TW plank of size 375mm x 300mm x 19mmwith supporting TW reepers of 1" thick an either side with painting with suitable bolt and nuts for fixing the TWplank on wall with earth connection and inter connection with 7/20 PVC insulated copper wire from EB meter tofuse unit.SD125

Supply and fixing of 3 phase 4 wire 4 way ICDB of 32 Amps per way with 100 Amps, TPN MC switch withsuitable trunking box MS cable entry boxes and internal connection on suitable angle iron frame work withPWD earthing SD177

Supply and fixing of Kisok box (Steel Box)

Supply and run of 4 of 6 sqmm (84/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V grade on7/20 GI bearer wire for service connection mains SD NO:68

Supply and fixing of Rainwater downfall pipe with accessories etc

Supply and fixing of CPVC pipe arrangements

32mm CPVC Pipes

32mm CPVC bend in SI No.363

32 mm CPVC Coupler

32 mm CPVC Tee

32x20 mm GI Reducer

20 mm SS Water Tap (Local Rate)

Providing for Name board

GST Amount for providing Service to Government Contract Works for the above Construction Works. { GST Amount is the Total GST Amount for total overall quoted amount above this row in column "BB" for all works in this package}

R SELVAKUMAR