Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹8.2 LAccepted-AOC NOT AVAILABLE | L1 | Accepted-AOC Being Lowest Tenderer | |
| 2 | L2₹8.7 L+₹44,851.32 (5.44%)Rejected-AOC B 13 ROOM NO 2 2 SHIVA PALM BEACH SOCIETY SECTOR4 NERUL WEST NAVI MUMBAI 400 706 | THANE | MAHARASHTRA | 400706 | L2 | Rejected-AOC Other than lowest tenderer | |
| 3 | L3₹9.6 L+₹1.3 L (16.0%)Rejected-AOC | L3 | Rejected-AOC Other than lowest tenderer | |
| 4 | L4₹9.7 L+₹1.4 L (17.3%)Rejected-AOC ROOM NO 680 GANESH MURTY NAGAR PART NO 03 CAPT PRAKASH PETHE MARG COLABA MUMBAI 400 005 | MUMBAI | MAHARASHTRA | 400005 | L4 | Rejected-AOC Other than lowest tenderer | |
| 5 | L5₹10.3 L+₹2.0 L (24.7%)Rejected-AOC | L5 | Rejected-AOC Other than lowest tenderer |
Tender Value
₹9.8 L
EMD Value
₹19,500
Closing Date
3 Aug 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Garrison Engineer, GE (P) (NW) No.2 Mumbai
GE (P) (NW) No.2 Near KV No. 2 New Navy Nagar Mumbai - 400005
PROVISION OF SITE OFFICE AND STORE ROOM FOR MES STAFF OF 464 DUS SITE AT COLABA UNDER GE (P) (NW) NO. 2 MUMBAI
2022_MES_536040_1
8013 E8
Open Tender
Construction Works
Item Rate
180 days
Colaba
Please refer Tender Documents
2 documents required · 2 mandatory
₹500
GE (P) (NW) No.2
₹19,500
Yes
30 Aug 2022
6 Jul 2022
5 Aug 2022
6 Jul 2022
3 Aug 2022
21 Jul 2022
60 days
Amount
Excavation in trenches not exc. 1.50 m wide and not exc. 1.50 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. not exc. 10 Sqm on plan and getting out in soft / loose soil complete all as specified and directed.
M & L for plain cement concrete, Type D2 1:4:8 Nominal Mix (using 40 mm graded stone aggregate) as in foundation, filling and mass concrete complete all as specified and directed.
M & L for block masonry with solid pre-cast cement concrete blocks made out of cement concrete 1: 3: 6 type C-1, using 20 mm graded stone aggregate, exc. 10 cm in width and setting in cement mortar 1 : 6 complete all as specified and directed.
M&L Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick spread, levelled and rammed including watering complete all as specified and directed.
M & L for Hardcore of gauge not exc. 63 mm, deposited, spread and leveled in layers not exc. 15 cm thick, watered and rammed to a true surface using broken stone or boulders complete all as specified and directed.
M & L for providing 100 mm thick cement concrete1:4:8 type D2 (using 40 mm grade stone aggregate) as in sub floor, sub base of floor complete all as specified and directed.
M & L for 10 mm thick rendering in cement mortar 1:6 on other than fair faces of brick work or stone masonry or on one side of lathing surfaces and finishing the surface even and fair without using extra cement complete all as specified and directed.
M&L for 15mm thick rendering in two layer on fair faces of brick work or concrete surfaces of wall, 5 mm thick in CM 1:4 mixed with WPC @ 3% by wt of cement over 10 mm thick rendering in cement mortar 1:6 and finished even and smooth without using extra cement complete all as specified and directed. (Note: WPC will be measured separately)
Supply only integral water proofing compound complete all as specified and directed.
M & L for preparation of newly plastered or un-plastered surfaces of walls and applying three coats of white wash complete all as specified and directed.
M & L for preparing newly plastered or previously untreated walls surfaces and applying two coats of cement base paint over one coat of primer complete all as specified and directed.
M & L for 2nd class hard wood plain, solid, straight chowkhats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed.
S & F of 35 mm thick flush shutter solid core construction, with block board core and plywood face panels, commercial type on both faces complete all as specified and directed.
S & F of flat iron bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gate, hook and pintle hinges, large hasps and staples, chains, hand made sliding bolts, clamps, hold fast, wall ties, hooks for hanging fans and other similar small steel article conforming to Fe – 290 Gde E -- 165 complete all as specified and directed.
S & F Solid PVC door frame of size 50 mm X 47 mm made out of 5 mm plain coloured PVC sheet reinforced with mild steel square tube as per specification and drawing given on MES schedule Part – II (2010) complete all as specified and directed.
S & F 30 mm thick (style thickness) factory made solid panel PVC shutter consisting of frame made out of mild steel tubes for top and bottom rails, mild steel frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side & as gap insert for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles and rails with suitable PVC sheets beading and joined together with solvent cement as per specification and drawing given on MES schedule Part – II (2010) complete all as specified and directed.
M & L for preparation of New or previously untreated wooden surfaces exc. 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.
S&F 100 mm size of butt hinges, medium weight cold rolled mild steel for door etc complete all as specified and directed.
S&F 150 mm size extruded aluminium alloy handles fabricated type anodised complete all as specified and directed.
S&F 200 mm size aluminium anodised barrel tower bolts of extruded section and fixed to shutter complete all as specified and directed.
S & F of 300 mm long (Length of bolt) aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheets, cast or extruded sections and fixing bolts and sliding bolt of extruded sections or cast aluminium alloy complete all as specified and directed.
M & L for providing pre-cast reinforced cement concrete1:2:4 type B1 (using 20mm graded stone aggregate) as in landing, cover slabs (for man holes etc), chullah hoods, chajjas, water troughs, mangers, shelves and similar items with plain faces in cement concrete 1:2:4 type B-1, using 20 mm graded stone aggregate and setting in cement mortar 1:6 including formwork complete all as specified and directed.
M & L for mild steel TMT bars 6 to 8 mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.
M & L for mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.
M & L for mild steel TMT bars 5mm dia and over upto and including 10mm dia as in stirrups, spacers and binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.
M & L for reinforced cement concrete 1:2:4 type B1 Nominal Mix (using 20 mm graded stone aggregate), as in lintels upto 1.5 m clear span, cills, steps,seismic and other similar bands, plinth course, string courses, lacinng courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles & throating as directed including necessary form work as required complete all as specified and directed.
M & L for use & waste of formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs etc. also splayes between floors and beams in rough finished flat surface of concrete complete all as specified and directed.
S & F of rolled mild steel sections as in roof trusses (framed), trussed, purlins, crane gantries, rails, fastening and heavy bracket framing (Beam, tee, angle, channel or flat sections), including distance pieces, cleats etc. including cutting, welding etc. confirming to Fe – 410 – W(Gde E - 250) quality 'B' complete all as specified and directed.
S & F of rolled mild steel plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment confirming to Fe – 410 – W(Gde E - 250) quality 'B' complete all as specified and directed.
M & L for preparation of New or previously un-treated steel surfaces over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed.
S & F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour as approved by Engr-in-charge having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.
S & F Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour as approved by Engr-in-charge having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc. 25 cm thick in each layer as in soil complete all as specified and directed.
Removing surplus excavated material (SOIL) to distance exc. 50 m but not exc. 100m and depositing where directed at a level not exc. 1.50 m above the starting point complete all as specified and directed.
S & F of steel window with side hung shutters including projecting type hinges with steel handle and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and directed.
S & F of steel ventilator with centre hung shutter including two pairs of brass pivots, catch spring and pulley wheel complete all as specified and directed.
S & F anodised aluminum snap grid frame work of size 605 x 605 mm for false ceiling complete all as specified and directed.
M & L for 12 mm thick Gypsum Board in ceiling of size 600mm x 600mm fixed with screw as per manufacturers instruction complete all as specified and directed.
M & L for Non skid ceramic coloured tiles (square / rectangular) of 7 to 8mm thick, area of each tile exceeding 0.06 sqm but not exc. 0.11sqm as in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tile over and including 15mm thick screed bed in CM (1:6) complete all as specified and directed.
M&L for glazed ceramic coloured tiles 450x350mm or 450x300mm) 7x8 mm thick in vertical surfaces including 15mm thick rendering in cm (1:6) etc set and jointed in neat cement slurry and pointed in coloured cement to match complete all as specified and directed.
S & F for Wash Hand basins, Vitreous China, white, flat back, size 550x400mm, including cutting for and pinning in ends of brackets or erecting stand, cast iron brackets, waste union and perforated grating, 32mm dia. PVC waste pipe of standard length fitted with 32 mm dia chromium plated brass screwed waste coupling outlet, 15mm bore chromium plated brass pillar cock/tap, 450mm long 15mm dia low density PVC connecting pipe with PTMT unions at both ends complete all as specified and directed.
S & F of 75 mm dia grating square of PTMT (minimum weight 100 gram) complete all as specified and directed.
S & F for Vitreous China wash down water closet pan (pedestal pattern), white, with fixing bolts, including Plastic seat with cover, 10 ltrs capacity flushing cistern, 450mm long 15mm dia low density PVC connecting pipe with brass union at both end, 32 mm dia flush pipe, 15mm bore brass CP hand faucet with suitable SS flexible pipe and Toilet paper holder of size not less than 150mm x 150mm all acceessories required for fixing complete all as specified and directed.
S & F of 15 mm bore bib taps, fancy type cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.
S & F of 75 mm dia PVC (SWR) Multi floor trap, with grating including jointing with solvent cement complete all as specified and directed.
S & F of 15 mm bore stop valves, cast copper alloy, fancy type chromium plated screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and directed.
S & F of 15 mm bore Unplasticised PVC (UPVC) of pressure rating 10 Kgf per Sqcm with and including all fittings and fixed to walls and ceilings or laid under floors complete all as specified and directed.
S & F of 20 mm bore Unplasticised PVC (UPVC) of pressure rating 10 Kgf per Sqcm with and including all fittings and fixed to walls and ceilings or laid under floors complete all as specified and directed.
S & F of 15 mm size swivel shower rose of PTMT, any colour (minimum weight 40 gram) complete all as specified and directed.
S & F of 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints laid in trenches or in floors complete all as specified and directed.
S & F 75 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints, laid in floors or fixed to walls complete all as specified and directed.
S & F of 110 mm bore PVC (SWR) bend any radius complete all as specified and directed.
S & F of 75 mm bore PVC (SWR) bend any radius complete all as specified and directed.
S & F of 110 mm bore PVC (SWR) junction Single, (Single ‘T’) equal or unequal complete all as specified and directed
S & F of 110 mm bore PVC (SWR) Vent cowl complete all as specified and directed
S&F Reinforced concrete pipes 150 mm dia, class NP3, laid and jointed complete with collars all as specified and directed
M & L for cement concrete 1:3:6 type C2 Nominal Mix, using 40 mm graded stone aggregate as in bed to drain pipes of 150 mm bore including packing under and haunching against the sides of pipe after they are laid and tested complete all as specified and directed.
S & F of 3 mm thick frosted sheet glass, ordinary quality and glazing with oil putty or fixed with beads in square not exc. 0.5 Sqm in each pane complete all as specified and directed.
S & F for Soap dish,Vitreous China, white, approxmate size 160x160x90mm, foxed to plug with chromium plated brass screws complete all as specified and directed.
S & F of Towel rail of brass chromium plated tubular conduit 20mm dia, 600mm long with brackets, fixed with and including Chromium plated brass screws and wooden / plastic cleats complete all as specified and directed.
S & F of 125 / 110 mm size PVC (SWR) gully trap, setting and jointing with solvent cement complete all as specified and directed.
S & F of 500 Litre capacity rotational moulded polythene water storage tanks (cylindrical vertical with closed top) of specifications as per MES Schedule 2009, Part – I and hoisted, fixed in position complete all as specified and directed.
S & F of 25 mm bore ball brass valves, high pressure, with polythene float and fly nut complete screwed for iron pipe or brass ferrule complete all as specified and directed.
S & F of 20 mm bore gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe complete all as specified and directed.
M & L for 75 mm thick cement concrete 1:3:6 type C2 Nominal Mix using 40 mm graded stone aggregate as in plinth protection laid to slop of 1:12, finished surface even and fair without using extra cement with and including all necessary form work to divide the area in panels, finishing exposed edges fair or rounding or chamfering where directed and providing 6 mm thick joints through out the thickness of plinth protection duly filled with mastic filling (one part of hot bitumen 85/25 and three part of fine sand by weight) complete all as specified and directed.
Excavation in post holes (or similar holes) each not exc. 0.50 Cum, getting out, returning, filling and ramming earth or broken rubble mixed with earth around in layers not exc. 25 cm watering and removing surplus soil to a distance not exc. 50 m and making good surface as in soft/loose soil complete all as specified and directed.
M & L for providing 25 mm thick cement concrete type B1 1:2:4 Nominal Mix (using 20 mm thick graded stone aggregate) as in floor, laid in panels and position to conform to design and finishing top surface even and smooth with using extra cement complete all as specified and directed.
S & F of 4 mm thick plain sheet glass, ordinary quality and glazing with oil putty or fixed with beads in square not exc. 0.5 Sqm in each pane complete all as specified and directed.
M & L for point wiring with two run of PVC insulated unsheathed single core multi stranded copper conductor 1.5 sqmm (Red and Black colour), 1100 volts grade cable, FRLS, passing through PVC conduit ISI marked medium grade not less than 20mm dia with all conduit accessories in concealed wiring system by cutting of wall and making good disturbed surface and S&F PVC modular metal flush box with modular white cover plate with frame, suitable for mounting modular fittings like switches, switch socket, fan regulator etc including one run of PVC insulated unsheathed multistranded copper conductor cable 1.5 sqmm (green colour) FRLS earth wire and connected to earth dolly complete all as specified and directed for the following:-
One light/fan point controlled by one way switch.
One 3 pin socket outlet, 5 Amps on the same board with other switches.
One 3 pin socket outlet, 5 Amps on the Independent board.
All as per item No 71.00 above but with 4.0 sqmm cable for one 3 pin socket outlet 15/16 Amps on the independent board.
M & L for ceiling rose, 3 phase, PVC/ polycarbonate, isolated body of size complete all as specified and directed.
M & L for modular switch, 1 way 6 Amp, 1 module complete all as specified and directed.
S & F for modular socket 6 Amp, 2/3 pin, combined, 2 module, complete all as specified and directed.
S & F for modular socket 6/16A, 6 pin, combined, 2 module complete all as specified and directed.
M & L for modular switch, 1 way 16 Amp, 1 module complete all as specified and directed.
Supply and fixing LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed.
Supply and fixing LED lights fitting mirror type with high out put diffuser 2 feet, 1x10 watt, 220V, AC decorative type with driver, holder including LED lamp connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed.
Supply and fixing stepped modular type electronic fan regulator FSC type 2M complete all as specified and as directed.
Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep and connecting up including provision of three core flexible copper wire of size 23/0076 rom ceiling rose to ceiling fan complete all as specified and as directed.
Supply and fixing exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz RPM 1200, Copper winding of sweep 300 mm and connecting up including provision of three core flexible copper wire of size 23/0076 rom ceiling rose to exhaust fan complete all as specified and as directed.
Supply and fixing rating 240V, 10KA 'C' curve, miniature circuit breaker (MCB) of Single Pole and 6Amp to 32Amp current carrying capacity in the MCB DB complete with connection testing and commissioning complete all as specified and directed.
Supply and fixing rating 240V, 10KA 'C' curve, miniature circuit breaker (MCB) of Single Pole Neutral and 40Amp to 63Amp current carrying capacity in the MCB DB complete with connection testing and commissioning complete all as specified and directed.
Supply and fix double door metallic sheet metal enclosure for DB when MCBs to be used SPN 8 ways, 240 V with 200 Amps rated bus bar complete fixed properly on in concealed position and to provide required sizes of flexible conduit at any open surfaces near DBs of cables/wires complete all as specified and directed.
M & L for Earthing with galvanised steel earth plate electrode 60cm x 60cm x 6mm thick, buried directly in ground (earth pit not less than 2.25m below normal ground level) with top edge of earth plate not less than 1.5m below normal ground level connected to main earth lead GI wire 4 mm dia by means of bolts, nut, check nuts and washers of galvanized iron or steel all as shown in electrical plate No.5 of MES Schedule pt-I 1991, GI earth lead wire protected by GI pipe 15mm dia light grade and connected to earth test point including excavation in any type of soil,returning filling, disposal of soil, providing charcoal dust and common salt upto top edge of earth plate, construction of PCC pit with RCC cover, funnel, watering pipe of 20mm dia GI light grade and provision of earth test point including testing on completion complete all as specified and directed.
M & L for dry sand cushioning to underground cables with 8cm thick before laying of cables and 15cm thick after laying and stretching of cable complete all as specified and directed.
M & L for modular type sub class ‘B’ bricks, laid in trenches as cable covers complete all as specified and directed.
Supply, laying, jointing and testing in trenches/ducts or fixing to pole/wall or passing throuhg pipe XLPE insulated, armoured, heavy duty electric cable size 10 sqmm x 2 core with aluminium conductor 1100V grade complete all as specified and directed.
Supply and fixing galvanised steel tubing light grade 80 mm bore laid in trenches or fix to wall/hole with fitting as required for cable protection complete all as specified and directed.
Supply and fixing galvanised steel tubing light grade 40 mm bore laid in trenches or fix to wall/hole with fitting as required for cable protection complete all as specified and directed.
Cutting of existing CI pipe in position for inserting of tee, bend collar other type of CI fitting for addition / alternation of existing system complete all as specified and directed for following sizes :-
100 mm bore
150 mm bore
Supply and fixing GI tubing medium grade with one socket both end threaded in any length including cutting, threading, connection in new or old position and all type of GI new fittings for laid in trenches/wall/ceiling/ floor complete all as specified and directed of following size :-
80 mm bore GI pipe
50 mm bore GI pipe
40 mm bore GI Pipe
25 mm bore GI pipe
S&F Gun metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe complete all as specified and directed for following size:-
50 mm bore
25 mm bore
S&F 40 mm dia brass ferrules screwed both end for iron pipe complete all as specified and directed.
S&F 25 mm dia brass ferrules screwed both end for iron pipe complete all as specified and directed.
Supply only Chair Revolving : As per description of FD-75 complete all as specified and directed.
Supply only ALMIRAH SMALL (STEEL) : As per description of FD-1032 complete all as specified and directed.
Supply only TABLE 900mm x 600mm x 760mm with drawer: As per description of FD-283 complete all as specified and directed.
Anil Industrial Corporation
M/S SURAJ A POUL
BA Enterprises
B P ENTERPRISES
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .