WBPWD/EE/KNHED/ NIQ-82/21-22

Amount

SITC of Analog Addressable Intelligent multisensor/ Heat detector ( Suitable for installed existing Siemens make FACP ) with inbuilt optical smoke sensors as well as additional heat detector sensor with decentralise intelligence, soft addressable Photothermal type with inbuilt fault isolator as per NFPA style 7 wiring complete with base having IP as per recommended standard.(Note : Detectors without built-in fault isolator is also acceptable but in such case the contractor shall provide one independent fault isolator module for every group of addressable devices ( Numbers of addressable devices in a group will be as per latest recommended standards ) without any additional cost). (Approved Make: Suitable for installed exsisitng FACP )(Only Siemens)

SITC of LED type Response Indicator (Suitable for installed exsisitng Siemens make FACP) having 2 Nos. red coloured LED lamps including connections etc. (Approved Make: Suitable for installed exsisitng FACP )(Only Siemens)

SITC of Microprocessor based Intelligent, addressable expandable and fully networkable moduler type 6 loop expendable upto 10 loop fire alarm control panel (suitable for existing SIEMENS make device ) not exceeding 80% of the full capacity of detectors and devices taken together, complying to IS 2189:2008 or its latest amendments, and with minimum 600 character alpha - numeric liquid crystal display.The panel shall be soft addressable type and shall be able to give pin point location of all fire/ fault conditions. Further, the panel must be able to automatically switch off respective control switches whenever any alarm is triggered.The Panel should be able to store sufficient numbers of log events in its Memory as per recommended standards. a) The panel shall have in built rectifier, provision for external & internal printer ( if required ), Loop cards,

L C D unit to indicate Fire/Fault Signal with address and analog output, complete in all respects, in built Surge protection facility, integral SMF lead acid batteries with sealed cells of 24 V capable of running for 24 hours normal working and then be capable of operating the system for 30 minutes during Emergency condition, with integral battery charger complete in all respect as required. b) The FACP shall be capable of being networked ( future expansion ) with other similar FACP located at different part of the premises through single RS 485 bus.The FACP shall have provision for interfacing with the public address system, remote computer and BMS interface.The system must be preloaded with licenced software. (Approved Make:Only Siemens)

Supply and Laying of 2 Core 1.5 sq.mm FRLS shielded copper Cable (For Loop) (Make. Finolex/RR Kable/Polycab ) with 20 mm NB PVC rigid conduit pipe(Make: Precision /AKG/ATUL /VIP/ Universal /BEC/Polycab) on the surface of the wall.

Supply and Laying of 2 core 1.5 sqmm FRLS shilded copper copper Cable (Make.Finolex/ RR Kable/ Polycab) with 25 mm NB GI rigid conduit pipe (ISI mark) for underground.

Office Automation Systems

NRD Global