Loading
Loading…
Loading…
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Tender Value
₹7.8 L
EMD Value
₹15,663
Closing Date
27 Oct 2026, 5:00 pm
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
EXECUTIVE ENGINEER
JAL SHAKTI DIVISION CHOWARI
SH Excavation Providing laying jointing and testing of pipe of 40 mm dia at RD 0 to 800 800 Rmt PF Barbed wire fencing around the storage tank at Sahla
2026_HPIPH_145842_1
NIT NO 13702-13800 DATED 14-10-2026
Open Tender
Civil Works - Water Works
Item Rate
60 days
CHOWARI CHAMBA HP
Please refer Tender documents.
7 documents required · 7 mandatory
₹350
₹15,663
15 Oct 2026
15 Oct 2026
28 Oct 2026
15 Oct 2026
27 Oct 2026
15 Oct 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Excavation in foundations trenches etc. in earth work in all kinds of soil such as pick work, jumper work, blasting work in hard/ soft rocks, chiseling / wedging out of hard /soft rock including dewatering in saturated soil up to all leads and lifts stacking the excavated soil / materials not more than 3 meters clear from the edge of excavation and then returning the stacked soil in 15 centimeter layers when required into plinths side of foundations etc., consolidating each deposited layer by ramming and watering and then disposing of all surplus excavated earth within all leads and lifts as per the direction of Engineer-in -Charge. | 252 | Cum | - | - |
| 2Providing , laying ,jointing & testing of PPR pipe (PN-10/SDR-11 ) -3 layers of following dia meter (polypropylene -random copolymer pipes) including all PPR fittings etc. for hot and cold water supplies confirming to IS:15801 with upto date ammendments having working pressure upto 25 Kg/cm2 complete within all leads and lifts and entire satisfaction and as per the direction of Engineer-in -Charge. | |||||
| 2.1 | PPR pipe 40mm dia | 800 | Rmt. | - | - |
| 3 | Providing and fixing 2.40 mtr heigh fencing with MS angles post 65x65x6mm of total height 2.90 metre @ 2.50 mtr. centre to centre with 9 nos horizontal lines and two diagonals of galvanised steel barbed wire (IS 278-1962 Type I) total weight 9.38 Kg.per 100 metres(minimum) including earth work cement concrete 1:3:6 (1 cement : 3 sand : 6 graded stone agg. 20mm nominal size ) and curing complete within all leads and lifts as per the direction of Engineer-in- Charge. | 59.1 | Rmt. | - | - |
| 4 | Steel work welded in built-up section, trusses and framed work including cutting hoisting, fixing in position and applying a priming coat of red lead paint in beams joists channels, angle cleats as in main and cross beam, hip and jack rafters, purlins connected to common rafters, steel gate and like within all leads and lifts as per the direction of Engineer-in- Charge. | 19.01 | Kg. | - | - |
| 5 | Providing and fixing M.S. pressed but hinges with necessary screw 125x65x2.12 mm with in all lead and lifts.as per direction of Engineer in Charge. | 2 | Nos. | - | - |
| 6 | Providing and fixing oxdized M.S. sliding door bolts with nuts and screws etc. complete 300x16mm within all leads and lifts as per the direction of Engineer-in -Charge. | 1 | Nos. | - | - |
| 47TERMS AND CONDITIONS 1 The work shall be executed strictly in accordance with ISV/HPPWD/IRC and BIS satisfaction as per instructions of the Engineer-in-Charge. 2 Nothing shall be paid to the contractor for rejected work/materials. 3 The payment to the labourers will be made in the presence of Junior Engineer concerned a representative of Engineer-in-Charge. 4 The work shall be executed with in stipulated period. 5. GST, Labour Cess and Security will be deducted from each bill of the contractor as per Govt 6. The PPR and its fitting will be provided by the contractor | |||||
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.80 MB
BOQ_217337.xls
BOQ • 0.28 MB
F68.pdf
Tender Documents • 2.06 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .