Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹18.8 LAccepted-AOC | L1 | Accepted-AOC Single tenderer |
Tender Value
₹18.0 L
EMD Value
₹36,053
Closing Date
12 Jul 2023, 4:30 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Executive Engineer
Office of the Executive Engineer, BRS, PWD, Puducherry
Urgent repair work at Female yard and Eastern side of Administrative buildings, Central Jail, Kalapet, Puducherry II Call
2023_PWDC1_13067_1
No.4/PW/BRS/23-24
Open Tender
Civil Works - Buildings
Item Rate
90 days
Kalapet
Please refer Tender documents.
3 documents required · 3 mandatory
₹525
₹36,053
13 Sept 2023
7 Jul 2023
13 Jul 2023
7 Jul 2023
12 Jul 2023
7 Jul 2023
Amount
Supplying at site: Welded steel wire fabric of required width rectangular mesh painted with two or more coats of enamel paint of approved shade over a coat of primer (painting to be paid for separately)
Providing and fixing M.S.grills of required pattern in frames of windows etc with M.S. flats , square or round bars etc. including priming coat with approved steel primer all complete - Fixed to steel windows by welding
Providing & fixing precoated galvanised iron profile sheets (size, shape, and pitch of corrugation as 0.50mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both sides of the sheet and polyster top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired. The sheet shall be fixed using self drilling / self tapping screws of size (5.5 x 55 mm) with EPDM seal, complete upto any pitch in horizontal / vertical or curved surfaces, excluding the cost of purlins , rafters and trusses and including cutting to size and shape wherever required
Demolishing brick work manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead - in cement mortar
Repairs to plaster of thickness 12mm to 20mm in patches of area 2.5 sq.metres and under including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50 metres lead - with cement mortar 1:4 (1 cement : 4fine sand)
Providing and fixing ASTM pipes including all ASTM plain & brass threaded fittings this included jointing of pipes & fittings with one step ASTM solvent cement , trenching refilling & testing of joints complete (External work) - 75 mm nominal outer dia pipes
Providing and fixing ASTM pipes including all ASTM plain& brass threaded fittings i/c fixing the pipe with clamps at 1.00m spacing . This includes jointing of pipes & fitting with one step ASTM solvent cement and testing of joints complete (Internal work exposed on wall ) - 20mm nominal outer dia pipes
Providing and fixing ASTM pipes including all ASTM plain & brass threaded fittings this included jointing of pipes & fittings with one step ASTM solvent cement , trenching refilling & testing of joints complete (External work) - 32 mm nominal outer dia pipes
Providing and fixing PTMT bib cock of approved quality and colour - 15mm nominal bore, 86 mm long , weighing not less than 88gms
Providing and fixing PTMT bib cock of approved quality and colour - 15mm nominal bore, 122 mm long , weighing not less than 99 gms
Providing and fixing gun metal gate valve with C.I.wheel of approved quality (Screwed end) - 32mm nominal bore
Providing and fixing gun metal gate valve with C.I.wheel of approved quality (Screwed end) - 25mm nominal bore
Providing and fixing gun metal non -return valve of approved quality (screwed end) - 32 mm nominal bore - Horizontal
Providing and fixing wash basin with C.I. brackets, 15mm C.P. brass pillar taps ,32 mm C.P.brass waste of standard pattern , including painting of fittings and brackets ,cutting and making good the walls wherever required - white vitreous china anglet back wash basin size 400x400 mm with single 15mm C.P. brass pillar tap
Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350mm or 340x410x265mm sizes respectively
Providing and fixing P.V.C. waste pipe for sink or wash basin including PVC waste fittings complete - semi rigid pipe - 32mm dia
Providing and fixing unplasticised P.V.C. connection pipe with PTMT nuts, collar, and bush of approved quality and colour - 15 mm nominal bore with 45cm length
Providing and fixing PTMT 15 mm urinal spreader size 95x69x100 mm with 1/2" BSP thread and shapes, weighing not less than 60 gms
Providing and fixing PTMT urinal cock of approved quality and colour - 15mm nominal bore ,80 mm long, 42 mm high and 30mm wide with BSP female threads weighing not less than 48 gms
Drainage spouts complete as per drawing and Technical Specifications. (Including 5 percent cost of material and labour for electrodes,cutting gas , sealant, anticorrosive bituminous paint, mild steel grating etc.)
Providing and fixing on wall face unplasticised rigid PVC rain water pipes conforming to IS: 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10mm gap for thermal expansion, (i) Single socketed pipes - 110 mm diameter
Providing and fixing on wall face unplasticised - PVC moulded fittings / accessories for unplasticised rigid PVC rain water pipes conforming to IS:13592 Type A, including jointing with seal ring conforming to IS: 5382, leaving 10mm gap for thermal expansion - Single tee without door -110x110x110mm
Providing and fixing on wall face unplasticised - PVC moulded fittings / accessories for unplasticised rigid PVC rain water pipes conforming to IS:13592 Type A, including jointing with seal ring conforming to IS: 5382, leaving 10mm gap for thermal expansion - shoe (plain) - 110mm shoe
Providing and fixing unplasticised - PVC pipe clips of approved design to unplasticised- PVC rain water pipes by means of 50x50x50mm hard wood plugs , screwed with M.S. screws of required length, including cutting brickwork and fixing in cement mortar 1:4 ( 1 cement : 4 coarse sand) and making good the wall etc., complete - 110mm
Painting with synthetic enamel paint of approved brand and manufacutre to give an even shade - Two or more coats on new work
Providing and fixing ball valve (brass) of approved quality , high or low pressure , with plastic floats complete - 15mm nominal bore
Providing two legged scaffolding using 15 cm diameter blue - gum posts or casurina posts or best quality bamboo - posts of 4m over all length (3.0m height + 0.5 m projection + 0.5 into the ground) the distance between the two rows being 1.25 m and the spacing of posts with 0.5 m overlap on either side and braces to step up and providing a platform with country wood planks of 40mm thick and 1m width etc in a complete form using coir and nails 1 m run (Rate of scaffolding for a height of 3 m and length of 1 m)
Exta for Providing two legged scaffolding for every additional height of 2.5 m (Rate for scaffolding for a height of 3 m and length of 1m)
Demolishing brick tile covering in terraching including stacking of serviceable material and disposal of unserviceable material within 50 metres lead.
Demolishing lime concrete manually / by mechanical means and disposal of material within 50 metres
Demolishing brick work manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead - in mud mortar
Brick work with common burnt clay F.P.S (non modular ) bricks of class designation 3.5 in superstructure above plinth level upto floor five level in all shapes and sizes in - cement mortar 1:6 ( 1 cement : 6 coarse sand).
12mm cement plaster of mix -1:4 ( 1 cement : 4 fine sand)
Applying cement based polimer modified primer coat for water proofing over the neat cleaned RCC or cement flooring porus surface at recommended ratio (ie classic grout admix 200gm per bag of cement and classic acry fix SBR polymer latex 1 litre per bag of cement) primadon or equivalent.
Providing and laying PCC 1:1.5:3 (1 cement 1.5 sand 3 6mm stone aggregate) haunching concrete 15 to 20cm wide mixed with classic Acryfix SBR polimer Latex 2 litres per bag of cement at the junction of roof and parapet wall to stop the entry of water after applying a primer coat of cement slurry mixed with Classic Acryfix SBR polimer latex ratio of 1 litre per bag of cement complete as directed by the Engineer-in-charge.
Providing a rough plaster coat with polymer cement mortar of mix 1:3 mixed with FlOADD at recommended ratio ie., 1 pack per bag of cement and SETCRETESB at 5 litre per bag of cement over the prepared lime mortar wall surface including all complete.
Providing a layer of trowel applied cementitious water proofing membrane of 5mm thick nominal SETSEAL Tanking - A prepacked water proofing single part system over the Setseal applied primer surface after wetting the surface including all complete.
Providing and laying Cool tiles 15mm thick of approved brand (Insulla or equivalent) with SRI value of 103 Bituminous of 0.5mm and size 230mm x 230mm on laid over bed of 20mm thick cement mortar 1:4 (1 cement 4 course sand) and including pointing using tile grout and neatly finished etc., complete.
Chipping the worn out wall and concrete portion using proper tools and removing the loose particles and preparing the surface for treatment with wire brush etc., complete until to reach good surface and removing the debris and disposal of the debris as directed by the Engineer-in-charge with all leads and lifts etc., complete.
Plastering the wall surface with cement mortar of mix 1:4 (one part of cement 4 fine sand) mixed with styrene butadiene styrene rubber latex of CERA / SIKA / FOSROC / MC Bauchmie / DON / BASF or Equivalent make certified and tested by accredited institutions (confirming to ASTM 1059-99 for bonding agent, Physical properties: Compressive strength 7.5 + or -2.0MPa, Tensile strength 2.0MPa at the ratio of 1:1.5:5 (1 part of cera polymer Latex: 1part of water, 5 parts of cement) in 2 coats including all lead and lift etc., complete as per manufacturer's specification and as directed by the Engineer-in-charge.
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .