E-Tender No. 107/2023-24, EUDC-II, Noida.

Amount

Bifurcation of 11 KV Line Feeder No. 6 emanating from 33/11 Susbstation Sector 108 New Noida.

Safe carriage of following stock material, from any of the Store Center of PVVNL to work site including Loading from Store and safe unloading at site for Item No. 3 to 8

ACSR Dog Conductor

ST POLE 11 M LONG

11kv Pin Insulatar With Pin

11KV Disc Insulator with Fitting

11KV Vtype Cross Arm

MS Channel 100x50sqmm

Supply and Errection of the above and Following material for completing the work as per RESPO.

The excavation of foundation pit in mix soil/normal soil/soft soil & hard rock as per site condition and its back filling and leveling etc. The size of the pit will be (750x450)mm and having depth of 1/6th of the full length of the support. Erection of support, complete with providing & fixing of all G.I.Clamps size of 75x10mm, 65x8mm, G.I.Nut bolt & washer, P.G.Clamp, Stone Pad, Al. Binding wire, 'E' bracket 75x10mm, and other accessories as per drawing. The work includes carriage and handling of supports from sectional store to pit site as well as any fabrication work if required & fixing of cross bracing sets 4.3mtr long, from G.I.Angle 65x65x6mm. The work includes cutting holes and providing G.I.Bolt of 16x40mm size, in the middle of the cross bracing with 01No. spring washer of proper size as per drawing/ as per schedule. Double Pole Structures (a) ST - 11 Mtr. Long Pole

The excavation of foundation pit in mix soil/normal soil/soft soil & hard rock as per site condition and its back filling and leveling etc. The size of the pit will be (750x450)mm and having depth of 1/6th of the full length of the support. Erection of support, complete with providing & fixing of all G.I.Clamps size of 75x10mm, 'F' bracket 75x10mm, G.I.Nut bolt & washer, Stone Pad Al. Binding wire and other accessories as per drawing. The work includes carriage and handling of supports from sectional store to pit site as well as an fabrication work if required. Single Pole (a) 11M Long STP, SP-55 Round Pole

Grouting of supports in CC 1:3:6 (Cement, sand & 20mm stone grift). Grouting will be done in the block of size (450x450)mm x1/6th of full length of the support, upto ground level, 300mm plinth above the ground level with C.C. 1:3:6 (Cement, Course sand and Stone grift) with muffing as per RESPO. Work includes back filling and proper ramming. Single Pole and Double Pole (a) 11M Long STP, SP-55 Round Pole

Laying, spreading, lifting and final sagging of 3 phases ACSR Dog conductor in accordance with Line chart includidng binding and fixing of all accessories in 03Nos. Conductor in parallel as per site requirement.

FIXING OF PIN INSULATOR WITH PIN, COMPLETE WORK IN ALL RESPECT.

FIXING OF Disc. INSULATOR WITH Fitting, COMPLETE WORK IN ALL RESPECT.

FIXING OF 11 KV V Type Cross Arm AS PER SITE REQUIREMENT.

Providing and Driving of MS earth rod of size 20x2500 mm in earth and jointing through G.I. wire of 6 SWG between support and earth electrode by providing proper size of bolts and nuts for pole earthing. Supply Erection, fixing, grouting of stay rod in cement, sand and brick ballast in ration 1:4:8 in Block 600*600*300 mm with binding & nuzzling including providing & fixing of stay insulator complete in all respect with grouting. (All Work and Material in the scope of Contractor)

FIXING OF 11 KV MS Channel 100x50sqmm AS PER SITE REQUIREMENT.

Supply and Fixing of Holding Clamp with Nut & Bolts (for V Type Cross Arm) as per site requirement.

Providing and Fixing of MS Nut & Bolts and Washers as per site requirement.

Bifurcation of 11 KV Line Feeder No. 6 emanating from 33/11 Susbstation Sector 108 Near Yatharth Hospital, Noida.

Safe carriage of following stock material, from any of the Store Center of PVVNL to work site including Loading from Store and safe unloading at site for Item No. 23

11KV XLPE 3x300 sqmm

SUPPLY OF FOLLOWING MATERIAL BY THE CONTRACTOR FROM THE PVVNL APPROVED VENDORS AS PER GTP APPROVED.

160mm O/D PN-6-PE-80 Grade UV Stabilized HDPE Pipe 6 inch Dia

Heat Shrinkable Straight Through Jointing kit suitable for 11KV 3x300 Sq.mm. cable (Make - Raychem/3M/Denson)

Supply and Errection of the above and Following material for completing the work as per RESPO.

Drilling of dia 220 mm in two parallel bores for Double Curcuit by trenchless method by horizontal boring machine at a depth of 1.50 mtrs to 2.50 mtrs. (as requirement at site) below the ground level with complete work in all respect as per RESPO.

Laying of 160mm O/D PN-6-PE-80 Grade UV Stabilized HDPE Pipe 6 inch Dia by HDD trenchless method for 11KV, 3x300 sq.mm XLPE cable as per site requirement.

Laying and commissiong of 11KV 3x300sqmm XLPE Cable Double Ckt. in HDPE Pipe PE-80, PN-6, DN-160mm dia after digging HDD trenchless method boring including complete connections at both ends after providing and fixing of crimping of lugs, HT Tape of proper size for completion of work with loop and riser on double pole as per site requirement.

Digging of pits of size 4 mtr x 4 mtr x 1.5 mtr for cable loop and making risers at double pole and re-filling of pits in proper manner with required material at kacha/pakka and hot mix road. (All Work and material in the scope of contractor)

Shiv Electricals