8372 SPECIAL REPAIR TO STREET LIGHT FITTINGS AND ALLIED ITEMS FOR ELLIOT LINES AND OTHER AREAS OF 41 ADSR AND SPECIAL REPAIRS REPLACEMENT OF OH CONDUCTOR TO LT UG CABLES AT AIPT AND APTC DEPOT UNDER GE (CENTRAL) PUNE

Amount

Excavation in trenches, not exc 1.5Mtr wide and not exc 1.5Mtr in depth in soft/ loose soil for laying of Pipe line / laying of LT UG cable and getting out complete all as specified.

Returning, filling in, including spreading, leveling, watering and well ramming in layers not exceeding 25cm as in soil all as specified and directed.

Removing excavated material to a distance not exc 50Mtr and depositing where directed at level not exceeding 1.5Mtr above the starting point all as specified & directed.

Supply and laying 50mm outer dia, double walled corrugated (DWC) HDPE duct pipe conforming to IS-14930 Part-II with antirodent and non flame propagating properties of approved colour complete with fittings for cable protection complete all as specified and directed.

M & L PCC 1:3:6 type C-1 using 20mm graded stone aggregate as in coping etc fair finishing the exposed surfaces even and smooth without using extra cement including use and waste of necessary formwork complete all as specified.

M & L 50mm bore dia GI Tubes "light grade", galvanised with all fittings laid in trenches for protection of cable all as specified & directed.

M & L 80mm bore dia GI Tubes "light grade", galvanised with all fittings laid in trenches for protection of cable all as specified & directed.

Supply, laying, testing and commissioning of LT cables 1100 Volts grade, XLPE insulated, screened and PVC sheathed, galvanised steel strip or wire armoured with multi stranded aluminum conductor, ISI marked, heavy duty including provision of cable glands, cable lugs in LT penel / MDB / along poles etc to suit the cable including all jointing / connecting acessories as required laid in trenches / ducts / under plinth floors / passing through pipes etc/ fixed on wall of size 25 Sqmm 4.0 core including taking out old existing cable complete all as specified & directed.

Supply, laying, testing and commissioning of LT cables 1100 Volts grade, XLPE insulated, screened and PVC sheathed, galvanised steel strip or wire armoured with multi stranded aluminum conductor, ISI marked, heavy duty including provision of cable glands, cable lugs in LT penel / MDB / along poles etc to suit the cable including all jointing / connecting acessories as required laid in trenches / ducts / under plinth floors / passing through pipes etc/ fixed on wall of size 16 Sqmm 4.0 core including taking out old existing cable complete all as specified & directed

Supply, laying, testing and commissioning of LT cables 1100 Volts grade, XLPE insulated, screened and PVC sheathed, galvanised steel strip or wire armoured with multi stranded aluminum conductor, ISI marked, heavy duty including provision of cable glands, cable lugs in LT penel / MDB / along poles etc to suit the cable including all jointing / connecting acessories as required laid in trenches / ducts / under plinth floors / passing through pipes etc/ fixed on wall of size 10 Sqmm 4.0 core including taking out old existing cable complete all as specified & directed

Supply, laying, testing and commissioning of LT cables 1100 Volts grade, XLPE insulated, screened and PVC sheathed, galvanised steel strip or wire armoured with multi stranded aluminum conductor, ISI marked, heavy duty including provision of cable glands, cable lugs in LT penel / MDB / along poles etc to suit the cable including all jointing / connecting acessories as required laid in trenches / ducts / under plinth floors / passing through pipes etc/ fixed on wall of size 120 Sqmm 3.5 core complete all as specified & directed

Supply, laying, testing and commissioning of LT cables 1100 Volts grade, XLPE insulated, screened and PVC sheathed, galvanised steel strip or wire armoured with multi stranded aluminum conductor, ISI marked, heavy duty including provision of cable glands, cable lugs in LT penel / MDB / along poles etc to suit the cable including all jointing / connecting acessories as required laid in trenches / ducts / under plinth floors / passing through pipes etc/ fixed on wall of size 150 Sqmm 3.5 core complete all as specified & directed

Supply, laying, testing and commissioning of LT cables 1100 Volts grade, XLPE insulated, screened and PVC sheathed, galvanised steel strip or wire armoured with multi stranded aluminum conductor, ISI marked, heavy duty including provision of cable glands, cable lugs in LT penel / MDB / along poles etc to suit the cable including all jointing / connecting acessories as required laid in trenches / ducts / under plinth floors / passing through pipes etc/ fixed on wall of size 185 Sqmm 3.5 core complete all as specified & directed

M & L preparing old painted surfaces by scraping and removing old paints, rust etc from steel Tubular poles upto 7.5 Meter length (above the planting depth and PCC copings) and Mild Steel cross Arms, Cable protection pipe Brackets etc and painting with one coat of synthetic enamel paint of alternate Yellow & Black strip (4 Nos each strip 150mm wide) upto 1.2 Mtr from PCC coping and remaining portion of Pole and Cross Arms, Cable Protection Pipe, Brackets, etc painted with one coat of aluminium paint complete all as specified and directed.

S & F in replacement of FRP junction box light weight suitable for pole mounting including all accessories required and necessary connector for loop in loop out cable (3 phase 4 wire) connection and suitable size glands of size 250 x 200 x 100mm comprising of MCB SPN 6Amps 240 Volts-01 No complete all as specified and as directed. Note :- Fixing clamps shall be made out of M.S Flat Iron 40 x 3mm thick with nut bolts and Unit rate quoted shall be deemed to be inclusive of the same.

S & F energy effcient LED security light fitting 60 Watt luminaire in pressure die cast housing with IP-66 with LED efficacy more than 100Lm/W and Liminious 6000 Lm (+/-) 10% OLP and short circuit protection complete all as per manufacture design including taking down existing unserviceable fittings complete all as specified and as directed..

M & L in replacement of bracket made of GI pipe 40mm dia light grade bend to shape, not less than 1.5Mtr with 02 Nos of MS clamps fabricated out of MS flat of size 25 x 4 mm including nut, bolts, washers etc complete all as specified and directed.

M & L for weather proof flat twin core 2.5 Sqmm aluminium conductor cable alongwith all required accessories , connecting from main board / FRP junction boxes on pole to security lights fittings on pole top fixed with GI bracket all as specified and directed.

Supply & Fix timer switch box fabricated out of 16 SWG CRCA sheet with mounting arrangement duly powder coated to be fixed on the ground by means of PCC foundation as required including taking down US timer box and consisting of following items all specified and as directed :- (a) Timer FM QT-01 No (b) Power contactor upto 65 Amps- 01 No (c) MCB 4 Pole 63 Amps 10 KA 415 Volts - 01 No (d) Connector 63A rating -01 Nos

M & L in replacement earthing with galvanised steel earth plate electrode 60cm x 60cm x 6mm thick buried directly in ground, earth pit not less than 2.25 Mtr deep below normal ground level with top edge of the plate Vertically to depth of not less than 1.5 Mtr below ground level connected to and including GI wire 4mm dia and GI pipe 15mm dia light grade for protection upto the extent of 7.5 Mtr as earthing lead by means of GI bolts and nuts etc connecting to equipment with provn of charcoal and salt etc all as per electrical Plate No 3 of SSR Part-I including RCC cover and MS angle iron frame, watering arrangement with GI pipe 20mm dia and MS funnel, concrete pit including excavation and earth work in any type of soil and testing on completion etc complete complete all as specified and directed. (Note : GI earth strip and protection pipe beyond 7.5 Mtr will be measured and paid separately)

Dismantling and taking down of ACSR or AAC conductors from LT OH lines of (Weasel / Ferrel / Squirrel / Beaver) including binding wire on insulators, separator etc complete all as specified and directed.

Dismantling insulators of any type / capacity from LT steel poles of any size / height all as specified and directed.

Dismantling the Cross Arms of M.S channel or angle sections etc complete all as specified and directed.

M & L for 150mm bore dia reinforced concrete pipes class NP-2 , in 1 RM each half round (each of 1 RM long include half round bottom and half round top) complete all as specified and directed. Note :- (i) Two half round pipe (Bottom and top) will be measured as one Running Meter (ii) Before laying of pipes excavated area shall be levelled as directed.

Cutting of road / hard standing and making good with PCC (1:2:4) type B1 using 20mm graded stone aggregate complete all as specified.

Supply, install, testing and commissioning factory made and tested (CPRI approved) LT feeder pillar suitable for 415 Volts, 3 phase, 4 wire, 50 Hz AC supply system having bus bas chamber with insulated Aluminium bus bars of rating 600 Amps installed on porcelain insulators. The feeder pillar shall be dust and vermin proof IP-65 class protection and made of 3.15mm CRCA MS sheet and 40 x 40 x 6mm thick MS angle iron frame work, powder coated finish over one coat of red oxide primer, front & back side opening type with apron for cable entry with single door shutter and locking arrangement including PCC and earth work etc including taking down old us panel and comprising of the following : -

Incoming :- MCCB 4 pole 36 KA, 400 Amps capacity 415 Volt, 50 Hz with O/L & S/C protection, AC supply complete with all standered accessories - 01 Nos

M & L for plate earthing for sub station equipmets (Transformer, lightning arrestor and feeder piller box) complete with galvanised mild steel plate electrode 60cm x 60cm x 6mm thick buried directly in ground , earth pit not less than 2.25 Mtr below normal ground level with the top edge of the earth plate vertically to a depth not less than 1.5 Mtr below normal ground level, the earth electrode surrounded by adequate quantity of charcoal dust and salt to a packet thickness of 15cm on all sides and including GI earth strip 32 x 6mm bolted (with GI nuts, bolts & check nuts) and riveted to earth plate electrode at one end and connected to metalic bodies of equipments etc at the other, earth strip encased in and including 40mm bore GI medium grade from bottom of earth pit to top of electrode complete with earth pit in PCC 1:2:4 type B-O using 12mm graded stone aggregate, RCC cover, funnel, wire mesh including necessary excavation and earth work, etc complete all as specified and shown in electrical plate No 3 of SSR Part-I. Note : (i) Refilling of the earth pit shall be carried out with black cotton soil. (ii) GI strip 32 x 6mm & GI protection pipe upto 7.5 Mtr length will be measured under this item.

M/S. OM ENTERPRISES

CHAITANYA WINDWELL

Sunhari Electricals

Mahindra Electric Stores

Chaulya Enterprises

Techmat trading solution

Sparkh Electricals & Works