Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L-1₹22.6 LAccepted-AOC 282 283 REMCO LAYOUT 1ST C CROSS 5TH A MAIN VIJAYANAGAR BANGALORE KARNATAKA 560040 | BENGALURU URBAN | KARNATAKA | 560040 | L-1 | Accepted-AOC L-1 | |
| 2 | L-2₹26.3 L+₹3.8 L (16.6%)Rejected-Finance | L-2 | Rejected-Finance L-2 | |
| 3 | L-3₹30.4 L+₹7.8 L (34.6%)Rejected-Finance | L-3 | Rejected-Finance L-3 |
Tender Value
₹24.3 L
EMD Value
₹48,601
Closing Date
6 Sept 2022, 10:00 amClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
The Director, CSIR-NAL
CSIR National Aerospace Laboratories, HAL airport road, Kodihalli, Bengaluru -560017
Re-laying of electric cables and systems at SID Division at Kodihalli campus, Bengaluru 560017
2022_CSIR_126584_1
ESD-NAL/05/E of 2022-2023
Open Tender
Electrical Works
Item Rate
150 days
CSIR-NAL, Kodihalli, Bengaluru
Please refer tender document.
11 documents required · 11 mandatory
₹500
The Director
₹48,601
17 Jan 2023
24 Aug 2022
7 Sept 2022
24 Aug 2022
6 Sept 2022
24 Aug 2022
Amount
Rewiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable and 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable as earth wire in existing surface/ recessed steel conduit including dismantling as required. (Group C)
Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit / cable raceways as required.
1 x 1.5 sq. mm (earthing for lighting)
2 x 2.5 sq. mm (circuit wiring for lighting)
2 x 4 sq. mm (Circuit wiring for plug points)
4 x 6 sq.mm. (circuit wiring for 3-Ø, 32A, Power points)
Supplying and fixing of following sizes of PVC conduit along with accessories in surface / recess including cutting the wall / floor and making good the same in case of recessed conduit as required.
25 mm (for lighting circuit)
32 mm ( for power circuits)
Supplying and fixing following size/ modules, GI box along with modular base & cover plate for modular switches in recess etc as required.
1 or 2 Module (75mmX75mm)
3 Module (100mmX75mm)
4 Module (125mmX75mm)
6 Module (200mmX75mm)
8 Module (125mmX125mm)
12 Module (200mmX150mm)
Supplying and fixing following modular switch / socket on the existing modular plate & switch box including connections but excluding modular box / plate etc., as required.
5/6 A switch
15 / 16 A switch
3 pin 5/6 A socket outlet
6 pin 15 / 16 A socket outlet
Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required.
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 amps modular socket outlet and 5/6 amps modular switch, connection etc. as required.
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 amps modular switch, connection etc. as required.
Supplying and fixing 3 pin, 5 A ceiling rose on the existing junction box/ wooden block including connections etc. as required.
Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CMM/W) minimum 6.85,Air delivery minimum 215 CMM, 350 RPM (tolerance as per IS : 374-2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin,nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required.
Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.
Installation, testing and commissioning of pre-wired, fluorescent , surface/ recess LED luminaires as per BOQ including installation of LED tube etc.,. all complete directly on ceiling / wall, including connection with 3C x 1.5 sq.mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required.
Supplying and fixing 5 A to 32 A rating, 240 / 415 V, 10 kA, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.
Single pole
Supplying and fixing 4 way (4 + 12), Double door horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)
Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable (A2FY/A2XFY) of 1.1 Kv grade as required.
3.5 core 25 sq. mm (28mm)
3.5 core 50 sq. mm (35mm)
3.5 core 95 sq. mm (45mm)
3.5 core 150 sq. mm (50mm)
3.5 core 185 sq. mm (57mm)
3.5 core 240 sq. mm (62mm)
3.5 core 400 sq. mm (82 mm)
3.5 core 300 sq.mm (70mm)
4 core 16 sqmm (28mm)
4 core 25 sqmm (28 mm)
Providing & fixing 25 mm x 5 mm G.I. strip on surface or in recess for connections etc. as required.
Providing & fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required.
Supply, installation, testing & commissioning of floor mounted having IP 42 protection modular type compartmental indoor LT POWER CONTROL CENTRE (LTPCC) with 600 A TPN aluminium bus bar. The details of the feeders & other accessories will be as follows: In-coming Feeder: a. 400A, 4 pole, 415V, 50Hz, 25 kA MCCB with microprocessor based release, S/C, O/C and E/F protections, shunt trip & RHOM - 1 No. b. Multi data meter having current, voltage, frequency, power factor, kW etc.,. with suitable rated CTs, terminal block having short links facility. - 1 Set. c. Electronic three phase trivector meter with suitable rated, 0.5 class accuracy CT's, terminal block having short links facility. - 1 Set d. LED type Indication lamps for indicating three phase power, on / off / trip indications feeder along with necessary control MCB. - 1 Set Out going feeders: a. 200A, 3 pole, 415V, 50Hz, 16 kA MCCB, with RHOM having adjustable thermal magnetic release, S/C & O/C protections - 3 No. b. 100A, 3 pole, 415V, 50Hz, 16 kA MCCB, with RHOM having adjustable thermal magnetic release, S/C & O/C protections.- 3 No. c. 63A, 3 pole, 415V, 50Hz, 16 kA MCCB, with RHOM having adjustable thermal magnetic release, S/C & O/C protections. - 2 No. All the above switch gears and other associated accessories shall be mounted in suitable size of enclosure made out of using 2 mm thick CRCA sheet steel for load bearing & 1.6 mm for non load bearing members as per standard practice. All the MCCBs incoming & out going feeders shall be inter connected using suitable rated bus bar / wire. Also the necessary speader links shall be provided as required. The provision shall be made available for terminating cable of size 1 runs of 3.5 core 400 Sq.mm & 3.5 core 150 Sq.mm Al.armoured XLPE cable for incoming & all outgoing feeders respectively at the bottom. Also necessary gland plates shall be made availble as required. All the cubical doors shall be earthed and aluminium earth bar shall be provided as per standard practice. The enclosure shall be painted with powder coated paint as required. The LT PCC shall be installed using necessary pedastals made out of angle iron frame / PCC / brick constructions, fastners etc, all complete as per the site requirement.The GA shall got approved before fabrication.
Supply, installation, testing & commissioning of floor mounted having IP 42 protection modular type compartmental indoor LT POWER CONTROL CENTRE (LTPCC) with 400 A TPN aluminium bus bar. The details of the feeders & other accessories will be as follows: In-coming feeder: a. 250A, 4 pole, 415V, 50Hz, 25 kA MCCB, MCCB with microprocessor based release, S/C, O/C and E/F protections, shunt trip & RHOM -1 No b. Multi data meter having current, voltage, frequency, power factor, kW etc.,. with suitable rated CTs, terminal block having short links facility. - 1 set c. LED type Indication lamps for indicating three phase power, on / off / trip indications feeder along with necessary control MCB. - 1 set Out going feeders : a. 160A, 3 pole, 415V, 50Hz, 16 kA MCCB, with RHOM having adjustable thermal magnetic release, S/C & O/C protections -2 No. b.100A, 3 pole, 415V, 50Hz, 16 kA MCCB, with RHOM having adjustable thermal magnetic release, S/C & O/C protections.- 3 No. c. 63A, 3 pole, 415V, 50Hz, 16 kA MCCB, with RHOM having adjustable thermal magnetic release, S/C & O/C protections.- 2 No. All the above switch gears and other associated accessories shall be mounted in suitable size of enclosure made out of using 2 mm thick CRCA sheet steel for load bearing & 1.6 mm for non load bearing members as per standard practice. All the MCCBs incoming & out going feeders shall be inter connected using suitable rated bus bar / wire. Also the necessary speader links shall be provided as required. The provision shall be made available for terminating cable of size 1 runs of 3.5 core 240 Sq.mm & 3.5 core 95 Sq.mm Al.armoured XLPE cable for incoming & all outgoing feeders respectively at the bottom. Also necessary gland plates shall be made availble as required. All the cubical doors shall be earthed and aluminium earth bar shall be provided as per standard practice. The enclosure shall be painted with powder coated paint as required. The LT PCC shall be installed using necessary pedastals made out of angle iron frame / PCC / brick constructions, fastners etc, all complete as per the site requirement.The GA shall got approved before fabrication.
Supply and fixing 12 way surface mounting vertical type, 415 volts, VTPN MCCB having 250 Amps tinned copper bus & neutral link distribution board mounted on suitable size of enclosure made out of CRCA sheet steel having IP - 30 protection, duly painted including out going neutral line, earth bar, din bar etc., all complete as required.
Supply and fixing 8 way surface mounting vertical type, 415 volts, VTPN MCCB having 100 Amps tinned copper bus & neutral link distribution board mounted on suitable size of enclosure made out of CRCA sheet steel having IP - 30 protection, duly painted including out going neutral line, earth bar, din bar etc., all complete as required.
Supplying, fixing, connecting & commissioning of 63A, three pole, 415 V, 10 KA, C curve miniature circuit breaker in the existing MCB DB complete with connections, testing and commissioning etc., as required.
Supplying, fixing, connecting & commissioning of 100A, four pole, 415 V, 10 KA, C curve MCCB in the existing MCB DB complete with connections, testing and commissioning etc., as required.
Supply of surface / pendent mounted LED flat panel of 36 / 40W, 4 feet cool day light luminaire. The lumen output shall be not less than 3275 lm, colour temperature 6500 k, high efficiency OPAL diffuser (OD), constant control electronic gear, PF > 0 .9, efficiency > 85%. All the components shall be mounted on CRCA front frame with high efficiency glare free opal diffuser and extruded aluminum housing, pre-coated with white colour paint etc,. all complete and ready for operation on 230V, 50 Hz, AC power supply as required.
Supply of Industrial type 2 x 18 / 20 W LED T8, 1200 mm length luminaire batten. The LED lamps shall be mounted on rails / channel made out of CRCA sheet steel as per OEM design. The necessary accessories like side holders, connectors and shall be of pre-wired and ready for operation on 230V, 50 Hz, AC power supply ( without LED tube).
Supply of 18/20 W T8 indoor retrofit LED tubes of length 1200 mm, high efficiency with heat resistant polycarbonate LED linear lamp ensure soft and glare free lighting, LED tube color shall be cool day white light, color temperature 6000-6500k and light output shall not be less than 2000 lumens suitable for operation with out ballast on 230 volts, 50 Hz AC power supply.
Supply and fixing of 80 x 50 mm cable raceways / cable trunking made out of PVC with flexible cover made out of PVC DLP trunking. The cable raceways / cable truning shall be mounted on surface of the wall using necessary fasteners and all accessories as required..
Supply and fixing of 32 x 12.5 mm cable raceways / cable trunking made out of PVC with flexible cover made out of PVC DLP trunking. The cable raceways / cable truning shall be mounted on surface of the wall using necessary fasteners and all accessories as required.
Supply, drawing & connecting of 1 x 2.5 sq.mm, FRLS PVC insulated copper conductor cable of 1.1 kV grade in the existing surface / recessed steel / PVC conduit / cable raceways / cable trunking as a earth conductor as required.
Re-wiring for group control light points 2 / 3 in a row with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable and earth wire in the existing surface / recessed steel / PVC conduit including dismantling of existing wire & other accessories as per the site requirements.The lights shall be controlled using suitable modular type 10 A, SP switch , suitable surface PVC box / recessed GI box & plate etc as required. (Group C) .The existing lights are placed at 5 meters distance a part from each other at site. Note: More than one light / exhaust fan / controls located at one place, the necessary modules may be used as against single module type PVC / GI box for fixing of switches with all other accessories as required.
Supplying and drawing 4 Runs x 16 sq.mm single core multi strand FRLS PVC insulated copper conductor flexible wire of 1.1 kv grade in the existing surface/ recessed steel/ PVC conduit / PVC cable raceway/cable trunking as required.
Supply, installation, testing & commissioning of maintenance free earthing system using 3000 mm length, 77-80 mm outer dia copper bonded M.S. Pipe as primary electrode. The Copper bonded pipe electrodes shall be of molecularly bonding of pure electrolytic copper (99.9%) with the thickness/bonding of ranging from 50 to 100 microns. The hollow space of the electrode shall be duly filled using high conductive and non-corrosive compound to withstand fault current lands on the electrode. Both the ends of the pipe / electrode shall be permanently sealed and the top portion of the earth electrode shall be provided with extended lead holes on the terminal for connecting to the earth terminals. The electrode shall be directly buried in the ground. The earth pit shall be refilled using environment friendly low resistance grounding minerals having a combination of graphite & natural earth minerals to form a low resistance zone all round the electrode. The required quantity of water shall be poured inside the earth pit as per the OEM recommendations as required. The necessary earth chamber shall be provided using heavy duty weather proof plastic cover with locking facility.
Disconnection & dismantling of existing LT mains Panel having various rated TPN FSU's including disconnection of mains, & outgoing cables and other associated accessories etc. as required. The panel shall be shifted to CSIR-NAL Central Stores located at a distance of 300 meters from the site as directed by the Engineer In charge.
Disconnection & dismantling of existing Industrial type light fixtures & ceiling fans. The dismantled items shall be shifted to CSIR-NAL central stores located at a distance of 300 meters from the site as directed by the Engineer In charge.
Dismantling of existing unserviceable recess / surface type, circuit mains / wiring, fan regulators,trunking, switches , sockets of various rating & other accessories etc. all complete as required and same shall be shifted to CSIR-NAL central stores located at a distance of 300 meters as required.
VEDAPRAKASH ELECTRICALS
AKEY ELECTRO TECHNIQUES
stage.html
html • 0.04 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .