Electrification or Repair to Electric System in M AND HED Complex and allied works Day to Day Maintenance of assets like Electrical, Electronics Gadget, Mechanical, Plumbing, Civil and other related works of M AND HED Complex Bikram Chowk Jammu

Electrification/Repair in M&HED by way of providing and fitting of 10sqmm copper wire(8mtr), strip for connection of wire in panel room and providing and fitting of socket 16A with switches, tubelight (08nos) 20w, 4ft long in direction office and Divisional office including repair to motor of cooler in circle office by way of dismantling it from cooler and then p/f of new motor with following ratings 230 v, 50 hz, 105 W, 1400 rpm including motor pump in place of damaged one. The job includes cost of material, labour and taxes.

Providing and fitting of new door in Technical officer room by way of dismantling of old damaged door along with fixtures and accessories and providing and fitting of new door made out of HDMR Board 35mm thick of size 3’-6”x6’-6” and fix it with 1mm thick mica sheet on both sides with the help of fevicol, Heatex and tape. Job also includes repair to chowkatt of size 16’-6” x 0’-4” by way of fixing board and 12mm ply on already fixed iron frame followed by mica sheet on both sides with the help of fevicol, Heatex and tape of size 16’-6”x0’-4” including providing and fitting door accessories like handle, door colder hinges, nails, door latch. The job includes cost of material, labour and taxes.

Providing and fitting of two number flexible drain pipe to 02 number ACs installed in Chief Engineer’s room and further disposal of drain water by providing and fitting of ¾” PVC pipe(10 length), bend, jointer solvent and other accessories with proper clamping from restring room to ground floor and another one to bathroom. The job includes cost of material, labour and taxes.

Providing and fitting of Charcoal Fluted panel of thickness not more than 14mm in Technical officer’s room. The job includes providing all the material and installing charcoal fluted panel as well as providing base frame in the metal sections of appropriate thickness and suitable backing if required. The job includes cost of material cost, labour and installation cost along with taxes.Area=228 ft2

Renewing of 06 nos. chairs in Chief Engineer’s room by way of providing and fitting suede cloth on back and base along with cushioning of the same by employing skilled labour. The job includes providing fitting of new cushions to the 5 seater sofa set in waiting room of divisional office. The requisite color is to be duly approved by Engineer in charge. The job includes cost of material cost, labour cost and taxes.

Providing and Fixing Blinds in the Technical Room of size (6’-0”x3’-0”) made out of HDPE waterproof fabric cloth with control chain or cord for smooth raising and lowering to be fitted with L Bracket and expansion screws for mounting of blinds The job includes cost of material, labour charges and taxes.

Dry cleaning of sofa in Chief Engineer’s room and waiting room of Divisional Office by way of vacuuming, stain removing with the help of cloth stain remover washing and deep cleaning and drying. The job includes cost of material required for cleaning, labour charges and taxes.