REPAIR AND REPLACEMENT OF SECURITY LIGHTS STREET LIGHTS AND VARIOUS TYPES OF GARDEN LIGHTS FEEDER PANELS AND ITS CONNECTED WORKS AT DGQA AUNDH COMPLEX UNDER GE MH RH KHADKI

Amount

Taking down old unserviceable LT UG cables of size upto 70 Sq mm from trenches / poles / ducts etc. complete all as specified and directed.

Supplying, laying, jointing, commissioning and testing XLPE insulated screened PVC bedded, armoured, heavy duty underground electric cable with stranded aluminium conductor 1100 volts grade confirming to IS-7098 (Part-I-1988) laid in trenches/ducts/wall / floor / pipes/ poles including cable glands and aluminium lugs of appropriate size, PVC sleeve etc complete all as specified and directed for following sizes . Make :- Polycab/Havells / Gloster / Finolex NOTE :- Earth work , bricks , riddled earth , GI pipe for protection of cable will be measured & paid under under relevant items of schdule .

50 sq mm 3.5 core .

35 sq mm 3.5 core

25 sq mm 3.5 core

16 sq mm 4 core.

10 sq mm 2 core

6 sq mm 2 core

Excavation in trenches not exceeding 1.5mtr wide and not exceeding 1.5mtr in depth for foundation of poles stays laying of electric cables, pipes etc and getting out in soft/loose soil complete all as specified and directed.

Ditto item no 3 but in hard/dense soil complete all as specified and directed.

Removing excavated material to a distance not exceeding 50mtr and depositing where directed at a level not exceeding 1.5mtr above the starting point complete all as specified and directed.

Returning, filling in, including spreading, levelling watering and well ramming in layers not exceeding 25cm in soft/loose soil complete all as specified and directed.

Material and Labour for riddled earth for cushioning to under ground electric cable including spreading , levelling and hand punning complete all as specified and directed. Note - Punned thickness shall only be measured & paid .

Material and Labour for road cutting/foot path and making good with PCC 1:3:6 TYPE C-2 ( using 40 mm graded stone aggregate ) of 150 mm thick complete all as specified and directed.

Supply and laying un-reinforced precast concrete cable cover LV, Type I, flat, size 250mm x 150mm x 40mm for Under ground cable complete all as specified and directed.

Supply and laying GI tubes light grade, galvanized, 40 mm bore in repair ,laid in trenches or under floor or fixed with poles/walls for protection of electric cable complete all as specified and directed.

Ditto item no -10 but 80 mm bore complete all as specified and directed.

Material and Labour for plain cement concrete 1:3:6 type C2 using 40mm graded stone aggregate for making foundation of Pole/stay assembly complete all as specified and directed.

Material and Labour for plain cement concrete 1:3:6 type C1 using 20mm graded stone aggregate for making copings of Poles etc. complete all as specified and directed.

Material and Labour for earthing complete with galvanised steel earth plate electrode 600x600x6mm thick buried directly in ground earth pit not less than 2.25mtr deep below normal ground level with top edge of the plate not less than 1.5mtr below normal ground level, connected to the earth lead wire 4.0 mm dia (GI wire) size, by means of bolts, nuts, check nuts and washers of galvanised iron, earth lead wire 4.0 mm dia protected by provision of GI medium grade pipe 15 mm bore including provision of 40 mm thick cover of RCC (1:2:4) type B1 (20mm graded stone aggregate), re-inforced with XPM (weight not less than 4 kg per sqm) and frame of angle iron 40x40x3 mm with lugs 02 Nos and with 6 mm dia MS bar handle made to shape, GI light grade 20mm bore pipe for watering perforated at bottom 1.75 mtr long placed on top edge of earth plate, common salt and charcoal filling, funnel, wire mesh and earth work in hard/dense soil, returning filling in and removal of surplus soil to distance not exe 50 mtr plate No 3 of SSR Sch 'A' Part-I and connecting to earth test point all as specified or indicated including testing on completion complete all as specified and directed.

Material and Labour for earthing complete with galvanized steel earth plate electrode 60 cm x 60cmx6 mm thick, buried directly in ground vertically (earth pit not less than 2.25 mtr deep below ground level) with top edge of the earth plate not less than 1.5 mtr below ground level , connected to 32x6 mm GI strip as earthing lead by means of bolts and nuts check nuts and washers of galvanized iron and connected to main switch board including watering arrangement with PCC chamber , MS funnel, wire gauge. CI cover with frame , 50 MM dia GI pipe light grade for protection of wire/strip etc including necessary excavation in any type of strata , returning, filling removal of soil outside MD land ,filling of charcoal and salt complete all as shown in electrical plate No. 3 of MES Sch Part I , connected to Earthing test point all as specified and directed testing on completion complete all as specified and directed.

Material and Labour for detection of street light LT UG cable fault with the help of cable fault detecting machine with experinced engineer and helper including necessary earth work complete & jointing the fautly cable with new joint , testing etc complete all as specified and directed. Note :- Cable joint kit will be measured and paid separately under relevent item of schedule .

Supply only straight through joint kit , heat shrinkable type suitable for LT UG electric cable 1100 volts grade of size up to 16 sq mm 2/3.5/4 core cable complete all as specified and directed.

Supply only straight through joint kit , heat shrinkable type suitable for LT UG electric cable 1100 volts grade of size from 25 sqmm to 50 sq mm 3.5 core/4 core cable complete all as specified and directed.

Supply and fix in repair brass terminal 4 way, 63 Amps/100 Amps capacity with bakelite insulator fixed in street light junction box complete all as specified and directed.

Taking down old unserviceable rusted damaged street light pole 9 mtr/ 11 mtrs long of any type complete from site complete all as specified and directed.

Supply and errect in vertical position Steel tubular swaged poles, type 410 SP- 31 (09 mtr long) with 300mm x 300mmx6mm mild steel plate continiusly welded to pole, final taper plug, bolts,nuts and screws and making holes as per requirement all as specified including factory painted with two coats of black bituminous paint internally through out and externally for embeded portion and applying one coat fo red oxide primer, making 05 Nos strip each 30 cm high with super enamel paint ( Black and yellow) from ground level / coping upto 1.5 mtr, painting with two coats of aluminium paint for the remaning height complete all as specified and directed. Note :- PCC in foundation, copping, excavation and earth work shall be measured and paid separately under relevent items of sch.

Supply and Erect in true vertical position, LT electric pole, Octogonal pole , hot deep galvanised with base plate of 220x220x12mm thick , 07 mtrs long , top dia 70mm , bottom dia 135 mm thickness of sheet - 3mm, including single arm GI bracket , inbuilt cable junction box with door , connection plate, MCB 6 A, duly connecting existing LT UG cable, cable lugs , work included necessary earth work and RCC foundation as per manufacturers recommendation complete all as specified and as directed. Make: Bajaj / Crompton Note: Earth work, PCC foundation, foundation bolts as per manufacturer recommendation included in the unit rate.

Taking down old unserviceable Flood light fitting of any type/capacity from its location complete all as specified and directed.

Supply and Fixing LED Flood light fitting of capacity 120 watts made up of pressure die cast aluminium housing with toughned glass and high power LED's and secondary lenses, having system efficiency greater than 110 lumen per watts with surge protection device included. The luminaries shall be totally enclosed dust and water proof with minimum IP -66 protection pre wired up to connector including 2.5 sq mm PVC insulated cable for making connection (upto 9 mtr length), complete all as specified and directed. Make :- Halonix/Crompton/Benlo.

ditto- all as per item no -24 but of capacity 150 watts complete all as specified and directed.

ditto- all as per item no -24 but of capacity 200 watts complete all as specified and directed.

Dismantling and Taking down old unsv street light fitting of capacity upto 120 watts from its location complete all as specified and directed.

Supply and Fixing LED Street light fitting of 90watt /100 Watt (Cool White) including LED lens complete with body robust, corrosion resistant, superior finish, made up of high pressure die cast aluminium alloy housing. The luminaries shall be totally enclosed, dust and water proof with minimum IP - 66 protection as per IS - 10322-1982(Part -I) with latest amendments and input voltage range 140 to 300 V, AC, frequency 50 Hz to 60 Hz, P.F should be more than 0.95 with Total Harmonic Distoration THD(I) less than 10% , cool white colour and lamp starting time should not be more than 10 second fitting should be provided with 10 KV surge protection. Driver should be constant current constant voltage driver .Driver should have high voltage withstanding capacity upto 300 V, AC. Driver should also have double phase protection,no load , open circuit and short circuit protection . The efficiency of LED luminaries system shall be more than 100 lumens per watt and must be certified by the LM-79 test report and including provision of connection for street light from pole box with 2.5 Sqmm PVC insulated stranded copper conductor FRLSH cable (upto the lenght og 9 mtr) complete all as specified and directed. Make :- CROMPTON / HALONIX /BENLO

Ditto item no 26 above but of 60 Watt complete all as specified and directed. Make :- CROMPTON / HALONIX /BENLO

Ditto item no 26 above but of 45 Watt complete all as specified and directed. Make :- CROMPTON / HALONIX /BENLO

Supply and Fixing Inverter LED Street light fitting of 90 Watt including LED lens complete with body robust,corrosion resistant,superior finish and without any cracks or through holes,made in a single piece by high pressure die cast aluminium alloy having inbuilt battery back-up for upto 2 hrs with auto ON/OFF.The luminaries shall be monolithic construction totally enclosed dust and water proof with minimum IP -66 protection as per IS - 10322-1982(Part -I) with latest ammendments and input voltage range 140 to 300 V, AC, frequency 50Hz to 60 Hz ,P.F should be more than 0.95 with Total Harmonic Distoration THD(I) less than 10% ,cool white colour and lamp starting time should not be more than 10 second fitting should be provided with 10 KV surge protection. Driver should also have double phase protection,no load , open circuit and short circuit protection. LED light fitting should be suitable for ambient temperature from -10 degree Centrigrade to 60 degree Centrigrade and humidity level 10% to 90 % RH. Covers should be polycarbonate/toughened glass to ensure minimum IP 66 degree protection. The efficiency of LED luminaries system shall be more than 100 lumens per watt and must be certified by the LM-79 test report complete all as specified and directed. Make :- HALONIX /BENLO/CROMPTON/JAQUAR

Supply and Fixing in repairs Bracket for fixing of street light fittings bend to shape, made out of 40 mm dia GI pipe medium grade upto 1.5 mtr long fixed with two sets of MS clamps made out of flat iron of size 50x6 mm fabricated to shape and fixed with nuts bolts and washers & two coats of aluminium paints over a coat of red oxide primer complete all as specified and directed. (Note : MS clamps, nuts, bolt and washer shall be measured seperately under relevant item)

Supply and Fixing three core PVC insulated and FR PVC round sheathed, copper conductor 1100 volts grade cable of size 1.5 sqmm (multi stranded) complete all as specified and directed.

S & F in repair LED bollard light, with aluminium housing with acrylic diffuser of cap 10 W/15 W inverted pyramid tripod type LED bollard with soft 360 degree light distribution with IP 65/66 protection, bollard length should be 800mm complete all as specified and directed. Make :- Crompton cat no LBLSN-10-CDL or equivalent in Halonex/Wipro/Surya. Note :- The quoted rates is inclusive of excavation and foundation work of Pcc of bollard fittings as recommended by OEM and Engr- In- Charge.

Supply and Fixing in repair of LED post top lantern 40W aluminium housing, with IP 65/66 protection, clear acrylic diffuser, die cast aluminium spigot , spun aluminium powder coated top cover complete with accessoires with suitable size 40mm/50mm/60mm outer dia GI pipe and plastering work wherever reqd complete all as specified and directed. Make :- Halonix cat no HLPT-04-40-CW or equivalent in Crompton/Wipro/Surya.

Supply and Fixing Junction box of size not less then 325x220x150mm, made of high quality thermo plastic polystyrene, weather proof, dust, jet water proof, chemical, acid corrosion, impact, insulated & shock proof IP 66 / 67 for outdoor Installation with internallly embedded gasket (PUR) including the box fitted with connector 8 way 40 Amps 01 No including Emlex stud type TB 4 Nos incoming / outcoming cable at controlled with MCB SP 6 Amps 01 No & enclosed along pole including fixing with steel tubular poles with two Nos FI clamps 25mmx3mm with nuts, bolts and washers complete and making connection with 1.5 sqmm copper conductor unsheathed FRLS PVC insulated 3 core from junction box to security lights fittings duly laid inside the streel tubular pole and bracket complete all as specified and directed. Note : (40 mm bore GI pipe light grade, 3 core 1.5 sqmm cable and GI brackets will be measured separately . Make :- Sintex Cat Part No. GSJB-3726 or equivalent in Indokop / Hensel Note :- Cost of flat iron clamp is deemed to include in unit rate of this items.

Material and Labour for repairing of street light fitting / luminaries of any capacity / type with replacement of burnt control wiring, LED drivers 45watt/60watt/90watt etc complete all as specified and directed. Note - (i) Cost of replacement of driver will be measured and paid separately under relevant item of schedule . (ii) Quoted rates is inclusive of T&P required for doing the complete job from any height.

Supply only LED Drivers of street light fitting suitable for 45watt /60 watt capacity street light fitting complete all as specified and directed.

Supply only LED Drivers of street light fitting suitable for 90watt /100watt /120watt capacity street light fitting complete all as specified and directed.

Material and Labour for removing old paint on steel surfaces by scrubbing with embry paper / wire brush and painting to steel tubular pole 9 meter /11 metre long (any type) with two coats of epoxy based paint aluminium grade paint over and including a coat of red oxide primer and painting up to 1.5 Mtr above PCC coping in black and white strips 5 Nos each 30 cm high starting from bottom of pole including writing of pole number with black enemelled paint of 25 mm high letters in 10 cm dia circle in white paint complete all as specified and directed.

Supply and fix in repair Astro time switch with more than 100 hrs battery back up working on 240 volts , 50 Hz AC supply as per cat No AUTS02AST00 of L&T make or equivalent make of Indoasian/Havells complete all as specified and directed..

Supply and fix in repair 4 pole power contactor of capacity 63 Amps , 415 volts AC for street light timer panel complete all as specified and directed.

Supply and fix in repair MCB 4 pole of capacity 40 Amps "C" curve , 415 volts including necessary disconnection of incoming and outgoing cable complete all as specified and directed.

Supply and fix in repair MCB SP of capacity 6 to 32 Amps "C" curve , 240 volts including necessary disconnection of incoming and outgoing cable complete all as specified and directed.

Material and Labour for triming of tree branches with in 2.0 mtr on either side of the electric line/Steet light poles and timmer panels and E/M installation with suitable T & P and desposing the waste complete all as specified and directed.

Material and Labour for MS Cross arms, bracings, supports, clamps and back plates fabricated from structural steel sections including nuts, bolts, washers, welding, bending cold or hot, drilling holes for bolts, in any shape or size as indicated or directed and inclusive of one primer coat, one under coat and one finishing coat of paint complete all as specified and directed.

Taking down old LED strip of any type from poles and boards and Supply and fix decorative type Tri colour LED strip, out door type of 16 mtr lenght with connection service wire of required length at poles and boards of various locations of DGQA complex, complete all as specified and directed. Note: (i) The rates are inclusive of service wire for connection from nearby pole/panel of required length upto 10 mtr distance. (ii) Quoted rates is inclusive of T&P required for doing the complete job from height upto 10 mtrs.

Supply and fix in repair solar LED street light 30 watt luminaire integarted made of corrsion aluminium as heatsink and MS powder coated housing IP-65 with PV rotation & tilting features ,inbuilt constant current driver , automatic dusk to down charge control with PIR motion sensor ,6500k temp , with integrated mounting bracket with 12.8v 30 AH lithium ferro phosphate (Li-FePo4) rechargeable BIS certified cells complete all as specified and directed. Make Halonix/Crompton/ Havells Note: Pole for mounting solar street light as specified by the OEM is included in the quoted rates.

Material and Labour for checking the solar light , charging of batteries, cleaning the surface of the solar panel, terminals etc and maintaining the serviceability throughout the period of contract complete all as specified and directed.

Supply and replace DC Charging with control unit for solar street light panel complete all as specified and directed.

Supply and replace batteries of solar street light of cap 54AH/60 AH , 12 volts /12.8 volts high effiency for solar street light 20 watts/ 30 Watts complete all as specified and directed.

Supply and fix rigid PVC line separator suitable for 2 wire made out from high grade PVC material , having distance between phase to phase 300 mm suitable for 1100 volts grade complete all as specified and directed.

Taking down unserviceable street light panel and Supply, install, commissioning and testing of street light panel outdoor type 415 V/440 Volts of size not less then 0.6 mtr X 0.6 mtr X 0.3 mtr CPRI Approved, confirming to IEC 61439 with IP-54 protection of suitable size made out of 3.15 mm thick CRCA sheet with locking arrangement and complete panel should be powder coated with having neoprene rubber gasket for sealing door, doors of the panel should be removable type, 3 ph indicators lamp etc with provision for 02 Nos of 2 Pole 32 Amp MCB out going, 01 No Incoming TPN 63Amp with Analog street light timer cat No AUTS02AST00 of L&T , copper panel control wiring as per IS direction,make internal compartment for mounting MCBs , the panel shall be mounting on 50mm x 50mm x 6 mm MS angle iron and 60 cm above the normal ground level & embedded 20 cm below ground level in PCC foundation (1:2:4) type B 1 (20mm graded stone aggregate), connect new UG cable for Incoming from LT panel cable shall enter through cable glands for safety of cable where enter through panel complete all as specified and directed.

Supply and Fixing in repair LED Post top heritage type 20W aluminium housing, with IP 65/66 protection, clear acrylic diffuser, die cast aluminium spigot , spun aluminium powder coated top cover complete with accessoires with suitable size 40mm/50mm/60mm outer dia GI pipe and plastering work wherever reqd complete all as specified and directed. Make :- Crompton cat no LPTH -20-WW or equivalent in /Wipro/Surya/Shakti.

Material and Labour for 50 mm bore Galvanised iron tubing, medium grade, IS-1239 marked including ISI marked fittings and laid in trenches/under road/drains, fixed to poles/ walls or fixed to pcc block for fixing the post top fittings with suitable type of accessories complete all as specified and directed. NOTE :- Clamps, nuts & bolts required shall be measured and paid for separately if required.

Supply and Fixing in repair LED Tiranga Light column of 4 mtr height with cylinderical aluminium pipe housing, opaque diffuser made out of engineering grade polymer with IP -65 protection with power output 50 watts with accessories complete all as specified and directed. Make :- Shakti cat No - SZPGCMX050-4M or equivalent in Halonex/Wipro/Surya. Note :- (i) The quoted rates is inclusive of excavation and foundation work of Pcc as recommended by OEM and Engr- In- Charge. (ii) The rates are inclusive of PCC coping of size 300mmx300mmx300mm to each pole

Supply and Fixing in repair LED Post top gate light luster with pole of dia 55mm (OD) made out of CRCA/GI body duly poweder coated of height 3.5 mtr including decorative LED post top lantern, cast aluminium housing with asthetically designed diffuser and reflector to deliver uniform light output OD of 55mm dia pipe with IP -65 protection with power output 45 watts with accessories complete all as specified and directed. Make :- Shakti cat No - SZPGCMX045-IP or equivalent in Halonex/Wipro/Surya. Note :- (i) The quoted rates is inclusive of excavation and foundation work of Pcc as recommended by OEM and Engr- In- Charge. (ii) The rates are inclusive of PCC coping of size 300mmx300mmx300mm to each pole

AMAN ENGINEERING AND ELECTIRICALS WORKS (BID ID -3455712)

SKS Electricals (BID ID -3461860)

PURVA ELECTRICALS AND ENGINEERS (BID ID -3456119)

SHREE VAIBHAV ELECTRICALS (BID ID -3456484)

Adinath Technical Services (BID ID -3461737)