Civil and Electrical renovation of Gas Sensor lab at CSIR-CEERI, Pilani

Amount

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes

Cement mortar 1:4 (1 cement : 4 coarse sand)

Providing and fixing aluminium body Cam Action Slide Channel Overhead hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment and 90 degree stop arrangement, of approved quality and make with necessary accessories and screws etc. complete.

Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete :

Size 250x10 mm

Size 100x10 mm

Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete

Size 125 mm

Providing and fixing bright SS finished brass 100 mm mortice latch and lock, ISI marked, with six levers and a pair of strainless steel 304 lever handles of approved quality and make with necessary screws etc. complete.

15 mm cement plaster on rough side of single or half brick wall of mix before placing fibre glass mesh 150 mm wide of approved quality at joint of RCC and brickwork or as required as per direction of Engineer-In-Charge

1:4 (1 cement: 4 coarse sand)

Distempering with 1st quality acrylic distemper, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required and including water thinnable priming coat with cement primer, to achieve even shade & colour and scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete

Two or more coats

Finishing walls with Acrylic Smooth exterior paint of required shade :

Two or more coat applied @ 1.67 ltr/ 10 sqm over priming coat of primer applied @ 0.80 litrs/10 sqm complete including cost of Priming coat to achieve even shade & colour and scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete on existing cement paint surface/rough cast plastered surface

Providing and fixing bright finished hooks and eyes in aluminium , ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade and approved quality and make with necessary screws etc. complete

Size 150 mm

Demolishing brick work,stone work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within CEERI campus lead as per direction of Engineer - in - charge.

In cement mortar

Dismantling doors, windows,rolling shutter and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within CEERI campus lead :-

Of area 3 sq. metres and below

Of area beyond 3 sq. metres

Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within CEERI campus as per direction of Engineer-In-Charge.

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :

For fixed portion Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15)

For shutters of doors, windows & ventilators including providing and fixing heavy duty strainless steel hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15)

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):

With float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm)

Providing and fixing Brass 100mm mortice latch and lock with 6 levers without pair of handles (best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete.

Providing and fixing aluminium round shape handle of outer dia 100 mm with SS screws etc. complete as per direction of Engineer-in-charge

Anodized (AC 15 ) aluminium

Providing and Fixing 0.50 mm thick PVDF (Poly Vinylidene fluouride) both side of aluminium thickness 3.00 mm overall thickness 4.00 mm on walls,in doors & ceiling with proper required haging system and having fire rating of 120 minutes and fixing with silicon tape/ adhessive material as required ,in opening shutters and fixed sections including cutting PVDF sheet as per required at site, preparing smooth surface and making holes/making good as required cutting hoisting and fixing aluminium members etc. complete as directed by Engineer-In-Charge

Providing and applying one coat of cement based ready made wall putty including preparing the surface smooth by san papering etc as per directions of the Engineer-in-charge. Consumption of the putty shall be not less than 5 Kg per 10 Sqm. Preperation and application of the putty shall be strictly as per the manufacturers guidelines and as per the directions of the Engineer-in-Charge. The putty shall be applied only after cleaning the surface thoroughly. Required curing shall be done before application of both the coats shall also be sand papered with Amery paper no. 320 No. to make the surface smooth and even suitable for any kind of wall painting. The rate includes all operations and all the material and necessary scaffolding etc. Complete as per direction of Engineer-In-Charge.

Providing and fixing homogeneous Polyvinyl chloride sheet / tile of 2.00mm thick in flooring and skirting in approved pattern on a smooth and damp proof base using rubber based adhesives of approved quality and manufacturer including welding of joints if required and rolling with light wooden roller weighing about 5 kg., all complete as directed by Engineer-in-Charge, in approved colour and shade including removal of old pvc flooring if required & preparing the smooth surface etc. as per direction of Engineer - in - charge.

Repairs of reveals and jambs of doors and windows with cement mortar 1:3 (1 cement : 3 fine sand) including chiseling the damaged area and disposal of mulba in low laying area in CEERI Campus as per direction of Engineer-In-Charge.

Electrical work Rewiring for light/fan/exhaust fan point with 1.5 sq. mm FR PVC insulated flexible copper conductor 1.1 KV grade and 1.5 sq .mm FR PVC insulated flexible earth copper conductor 1.1KV grade IS: 694 only of approved make (Group-1) in existing surface/recessed conduit pipe including dismantling of existing wiring, switchboard of any size with accessories/fittings etc. as required.

Group C (Irrespective of any length)

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed steel conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.

Group C (Irrespective of any length)

Supplying and fixing following size/ modules, GI box alongwith modular base, cover & blanking plate for modular switches in recess etc. as required. etc as required.

1 or 2 Module (75mmX75mm)

8 Module (125mmX125mm)

12 Module (200mmX150mm)

Supplying & Fixing of 3Pin, 5Amp. Ceiling rose on juction box with provinding round phinolic sheet, including making connections etc. as required.

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections butexcluding modular plate etc. as required.

5/6 A switch

3 pin 5/6 A socket outlet

Telephone socket outlet RJ 11

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 2 Nos. 3pin, 6 amps modular socket outlet with 2 Nos. 16 amp moduler switch and 1No. 6 pin 5/6 & 15/16 amps modular socket with blanking ,connection, painting etc. as required (different in colour of cover plate from general power for UPS / computer applications), making good the wall with matching colour distemper/ white wash etc. as required.

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch/removing recessed existing board, disconnection making connections and testing etc. as required.

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required.

2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire

4 X 2.5 sq. mm + 2 X 2.5 sq.mm

2 X 4 sq. mm + 1 X 4 sq. mm earth wire

4 X 4 sq. mm + 2 X 4 sq. mm earth wire

4 X 6 sq. mm + 2 X 6 sq. mm earth wire

Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/recessed steel/ PVC conduit as required.

2 x 1.5 Sq. mm

3 x 2.5 sq. mm

3 x 4 sq. mm

6 x 4 sq.mm

6 x 2.5 sq.mm

Supplying and drawing following pair 0.5 mm dia FRLS PVC insulated annealed copper conductor, unarmored telephone cable in the existing surface/ recessed steel/ PVC conduit as required.

Supply and laying 5 pair telephone armoured cable with aaproved make on existing shaft/trench/ wall/roof with including making connection on both side termination of the cable

Supplying & Fixing of following sizes of steel conduit along with heavy duty accessories, junction box etc. in surface / recesse including painting in case of surface conduit, or cutting the wall, repair and making good the same as required.

Supplying and drawing of 23 AWG UTP Data Cable (CAT 6) gigaspeed LAN Cable in the existing surface/ recessed Steel/ under floor trunking as required.

1 run of cable

P & F following modular accessories made out of unbreakable and fire retardant poly carbonate with silver contacts Simplex Faceplate with RJ-45, information outlet with shutter with colour coding on existing modular plate, including making connections testing etc. as required

Supplying and fixing 6-10 amp 'C' Curve modular DP MCB on the existing modular plate including connections but excluding modular plate etc. as required.

Supplying of Surface / Ceiling mounted LED light fixture-1200mm, Philips 36 W Cool White Smart Brite Surface Light, 6500 K with approved make including, connection wire of suitable length, all accessories etc. as required.

Supplying of recessed mounted 35 Watt full glow, slim energy efficient, Green Square 2'x2' LED lighting luminaires approved make complete with hanging arrengment all accessories, metallic CRCA powder coated housing etc. complete as required.

Supplying of surface mounted 15 Watt full glow, energy efficient, circuler LED lighting luminaires approved make complete with fixing arrengment all accessories, ABS/metallic CRCA powder coated housing etc. complete as required.

Installation, testing and commissioning of above LED tube light fittings complete with all accessories on surface of wall/ ceiling or suspended from ceiling including (in suspended Installation) providing hanging arrangment with clutch wire , transperent connection wire/ 1.5Sq.mm FR PVC copper conductor etc. as required.

Supply of 400mm size wall mounting oscilating type wall mounting fan having 3 speed push button control suitable for operation on 230volts, 50Hz, AC supply Approved mack or equivalantmake complete with continuous duty, motor, chrome plated front and rear guards etc.

Installation ,Testing, Commissioning of wall bracket /ceiling fittings of all sizes and shapes containing upto two GLS/CFL/LED lamps per fitting, complete with all accessories including connection with 1.5 sq.mm PVC insulated copper conductor single core cable as required.

Supply of following sizes of BLDC energy saver ( 5 star rated) ceiling fan without regulator complete with double ball bearing, motor, blades, down rod, canopy, etc. complete as required.

Size 1400 mm.

Installation, testing and commissioning of ceiling fan, including wiring the down rods of length upto 30 cm with 1.5sq.mm FRLS PVC insulated copper conductor single core cable etc. complete as required.

Providing and fixing 4.00 mm dia copper wire on surface or in recess for loop earthing along with existing surface/ recessed conduit/ submain wiring/ cable as required.

Supply& making one end termination with heavy duty single compression brass gland SIBG type, aluminium/ copper lugs duly crimped with crimping tool, PVC tape etc. for following size of XLPE insulated & PVC sheathed aluminium/ copper cable of 1.1 KV grade as required.

4 X 16 Sqmm.

3.5 X 95 Sqmm

P & F Recessed/ surface mounting vertical type with loos wire box heavy duty Double door type TPN-4 way sheet steel phosphatised powder painted Distribution Board with incomer 1No.100A, four pole Isolator outgoing- 9 Nos. SP AC MCB-32A 10KA ( 'C' breaking characteristic) 1 No. TP AC MCB-32A, 10KA, 240V ( 'C' curve ) for outgoing circuits, 200Amp busbar, neutral link, earth bar & din rail etc conforming to IS; 13032, IS; 8623, BS; 5486 of approved make including making all the incoming/ outgoing connections, internal DB terminations with copper lugs, testing etc. as required.

SITC of MCCB in CRCA sheet steel enclosure complete with four pole Moulded Case Circuit Breaker (Ics Value 18KA), Adjustable Thermal & Fixed Magnetic setting, suitable for incoming & outgoing termination including powder coating etc. complete as per specification & as required.

125 Amp FP MCCB.

Supplying & fixing 32 amps rating, 240 volts, "C" curve, MCB suitable for inductive load of folloing pole with suitable size MCB box encloser complete with connections, testing and commissioning etc. as required.

Double Pole with encloser

Four Pole 32 amp with encloser

Labour charges for dismantling of surface/ recessed light power point switch board of any size and depositing the same with listing of material in store.

Labour charges for dismantling of all types/ industrial type tube light fixtures/exhoust fan/Ceiling fan with down rod, ball and socket arrangements from wall/ ceiling with all accessories etc. as required and depositing the same in stores.

Dismantling of existing armoured UG cables of following sizes safely from Lab room duct/ shaft/ wall/ board including disconnections & making good the damages,return back the dismantled items to store/ EME Div. etc as required.

Upto 35 Sqmm.

MANIS AND COMPANY (BID ID -856691)

sihag construction (BID ID -856642)