PURCHASE OF ELECTRONICS EQUIPMENTS FOR FSD LAB

Digital Storage Oscilloscope (50 MHz Dual Channel) - Signal Band width: 50 MHz - No. of Channels: 02 Nos., Sampling rate: 1GSa/s Independent vertical scale & position control knobs for each channel - Trigger Type: Edge, Video, - Trigger Slope: Rising, Falling - Cursor Measurement - Automatic measurement, - Full Bandwidth - USB Communication supported - 7.0" TFT LCD Color display 5 Digits, LCD, Dual Display, Inductance, Capacitance, Resistance, Impedance, D, ESR and Q Test Facility, Test Frequency of 100Hz, 120Hz, 1kHz, 10kHz and 100kHz

Digital Multimeter –CAT rating CAT III 600 V True-rms readings Yes Voltage AC/DC 600 V Current AC/DC 10 A Resistance 40 MΩ Capacitance 9,999 μF Temperature -40 °C to 400 °F Additional measurement capabilities Continuity/diode test Maximum Voltage :600 V Display :Digital- 6,000 counts, updates 4 per second Battery Type 9-volt Alkaline, IEC 6LR61 Battery life: 400 hours typical, without backlight Operating temperature:-10℃ to + 50℃

Dual DC Regulated Power Supply (Variable 0-30V, 0-2A) 0-30Vcoarse and fine control 0-2 A current limit – coarse and fine control Digital displays for voltage and current for both power supplies Overload and short circuit protected

Digital Soldering Station Max. Power : 70W Temperature Range : 100ºC~480ºC(212°F~896°F) Temperature Stability : ±2ºC(Stationary air,no load) Tip to Ground Resistance : <2Ω Tip to Ground Potential : <2mV Unit’s Power Consumption : 220VAC,50Hz Dimensions : 140*85*120mm Weight : 1.5KgApprx