ADDITIONAL/ALTERATION AND SPECIAL REPAIRS TO CERTAIN BUILDINGS OF MH SECUNDERABAD.

Demolition of cement concrete (un reinforced ) of any description and in any position not otherwise specifically provided including removal of existing roof treatment of any type and any description complete all as specified and directed.

M&L for 40mm thick plain cement concrete type B1(1:2:4) ( using 20 mm graded stone aggregate) as in padding (level course) on roof finishing cement concrete surface even and fair complete all as specified and directed.

M&L for rendering 10 mm thick in CM (1:3) using water proofing compound as per manufacturer instruction as in roof and chajjas finishing cement concrete surface even and smooth without using extra cement complete all as specified and directed. Note : Water proofing compound will be measured and paid separately.

M&L for Cutting grooves in brick wall, 75mm wide and 65mm deep and shaping horizontal face of groove with cement mortar (1:3) complete all as specified and directed.

Dismantling timber scantlings in unframed work 40 sq. cm and over in section fixed in any position complete all as specified and as directed.

Dismantling Stone slabs in roofs, suspended floors, chajjas, landings, etc., any thickness, jointed in any mortar complete all as specified and directed

S&F Rolled sections of grade Fe 410W (Gde E-250)as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates complete all as specified and as directed.

S&F Steel works In tubular/ posts/ trusses/ purlin including special shaped washer etc.complete using ERW or induction butt welded tubes conforming to IS 1161-1797 grade St 240.

S&F Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment etc and fixed by riveting or welding or with nut and bolts (including nuts and bolts) conforming to Fe-410-W grade E 251 Quality B complete all as specified

Dismantling AC corrugated or semi corrugated etc sheets in roof coverings complete all as specified and as directed.

M&L Pre painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F Pre painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strengh of 550 mpa as on roof covering/ridges fixed with self tapping screws complete all as specified and directed.

Dismantling of wall and ceiling boards ( fiber pulp insullation etc ) or insullation boards / slabs, blankets any thickness including cover fillets complete all as specified and as directed.

Providing and fixing tiled false ceiling of size(600x600)mm in true horizontal level suspended on interlocking T-24 Grid of hot dipped galvanized corrosion free becase of the zinc coating 120GSM sections. It consists of main"T" runner of size 24x32x0.3x3000mm, cross"T" of size 24x32x0.3x1200mm, secondary cross"T" of size 24x32x0.3x600mm and PPGI wall angle of size 24x24x0.4x3000mm. The GI powder coated wall angle24x24x0.4x3000mm fixed along the perimeter of the ceiling to Walls, partitions or columns etc.,with wooden screws at 300mm centers placed at 600mmc/c. is fixed with Rawl Plug 08x45mm creating 1200mmx1200mm grid. Main-T runners 24x32x0.3x3000mm are then suspended at 1200mmc/c from ceiling using 2mm GIwire. The cross T sections of 24x32x0.3x1200 mm is interlocked between the main T at 600mm center to centert of or magrid of 1200x600mm and then secondary cross "T"24x32x0.3x600mm is then interlocked at middle of the 1200x600mm grid to form grids of 600x600mm. Cross Tees at the ends having length more than 600mm are to be supported independently. Finally the PVC tiles of size 595x595x8mm having PVC lamination infront side & Aluminum foil back on rareside need to be layed on the above grid frame. The PVC tile has humidity resistance RH 90%, Break strength of>160N, Fire resitance of Class AG3, 8624-1997 and NRC-0.15. Note : Colour of false ceiling shall be approved by Engr-in-Charge and GE. (Make Diamond or Equivalent)

M&L Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre.

M&L Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified

Providing and fixing Gypsum Board 12mm thick in ceiling fixed with screw as per manufacturers instructions

Demolition of cement concrete(unreinforced) of any description and in any position not otherwise specifically provided including floor finishes complete all as specified and directed.

M&L for PCC (1:3:6) type C2 ( using 40 mm graded aggregate) as in plinth protection of average 75mm thick including finishing cement concrete surface fair and even complete all as specified and directed .

M&L for 75 mm thick plain cement concrete 1:4:8 type D-2 (40 mm graded aggregate) as in subbase of floor complete all as specified.

M&L for 25 mm thick plain cement concrete 1:2:4 type B0 (using 12.5 mm graded stone aggregate) as below floor finish complete all as specified.

M&L for 40 mm thick plain cement concrete 1:2:4 type B1 (using 20 mm graded stone aggregate) as below floor finish complete all as specified.

M&L PCC 1:2:4 type B1 using 20 mm graded stone aggregate as in Coping and similar work.

Taking out old unserviceable floor, hearth or wall tiling including cement mortar bedding (but not backing and rubbish off the premises complete all as specified and as directed

M&L for 10mm thick vitrified light shade doubly charged polished ceramic tiles (square/ rectangular),area of each tile exceeding 0.42 sqm but not exceeding 1.00 sqm , in floor

s etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed in CM 1:6 complete all as specified and as directed by Engr-in-Charge.

M&L for 10mm thick vitrified light shade doubly charged polished ceramic tiles (square/ rectangular),area of each tile exceeding 0.42 sqm but not exceeding 1.00 sqm , in skirtings/ dados etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10 mm thick cement plaster backing coat in CM 1:4 complete all as specified and as directed by Engr-in-Charge.

M&L for 10mm thick light shade vitrified ceramic tiles (square/ rectangular),area of each tile not exceeding 0.36 sqm , in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed in CM 1:6 complete all as specified and as directed by Engr-in-Charge.

M&L for Non - skid Ceramic jointfree tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed in CM 1:6 complete all as specified and as directed.

M&L for 10mm thick light shade vitrified ceramic tiles (square/ rectangular),area of each tile not exceeding 0.36 sqm , in skirtings/ dados etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10 mm thick cement plaster backing coat in CM 1:4 complete all as specified and as directed by Engr-in-Charge.

M&L for chequered cement concrete tile 300 mm x 300 mm x 25 mm thick set jointed and pointed in neat cement slurry in floor with grey cement and pigment and including 20 mm thick screed bed cement mortar 1:4 all as specified and directed.

M&L for glazed ceramic coloured tiles 450x300x7mm thick on vertical surfaces such as dados set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10 mm thick backing coat in CM 1:4 complete all as directed by Engr-in-Charge.

M&L for Machine cut kota stone slab flooring 18-20mm thick over cement 20mm screed base in CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

M&L for machine cut kota stone slab 18-20 mm thick in riser of steps, skirting,dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete incl 10mm thick rendering in CM (1:3) backing of wall tiles such as dado/skirting in vertical surface complete all as specified and directed.

M & L granite work of any type 18-20mm thick ( of any type) work table rubbed & polished in steps , jambs , pillar, widow cills, cooking platforms and laid over 15mm thick screed bed or bedding in layer of in CM 1:4 for laying floor finishes incl pointing in white cement 1:2 using marble dust with admixture of pigment to match the shade of granite, complete all as directed and as specified.

Demolition of brick work or stone/boulders masonry built in Cement Mortar or cement lime mortar complete all as specified and as directed.

All per item No 86 above but of size 17" X 20" X 6 " .

Taking down plastering in cement mortar on brick or stone wall etc including racking out joints hacking for key scrubbing down with water etc. complete all as specified.

M&L for rendering 15mm thick on fair faces of brick works in CM 1:6 finished even and smooth without using extra cement complete all as specified.

Material and labour for rendering 5mm thick in cement mortar (1:4) with WPC over a layer of 10 mm thick in CM 1:6 on fair faces of brickwork or concrete surfaces, finished the surface even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 5 mm thick in CM 1:3 on ceiling,chajja,roof projection etc finished even and smooth without using extra cement.complete all as specified and as directed.

M&L for prepartion of new plastered surfaces on wall applying two coats of oil bound distemper over a coat of primer including 3mm thick in (two coats) wall care putty complete all as specified and directed.

M&L for complete removal or existing wall treatment of old surfaces and applying two coats of oil bound distemper over a coat of primer and 3mm thick wall care putty complete all as specified and directed.

Dismantling of stone slab of tiles of any description laid bedded and pointed in any motar

M&L for Complete removal of existing treatment including preparation of surfaces incl filling all cracks with approved crack filler and applying two coats of exterior emultion weather proof paint(APEX Ultima) over a coat of primer over 3mm wall care putty complete all as specified. Make :Apex Ultima of Asian Paint or any other equavalent .Note : Mentioned paint should be applied by roller brush only.

M&L for preparation of new plastered surfaces on wall and applying two coats of exterior emultion weather proof paint(APEX Ultima) over a coat of primer over 3mm wall care putty complete all as specified. Make :Apex Ultima of Asian Paint or any other equavalent .Note : Mentioned paint should be applied by roller brush only.

M&L for Complete removal of existing treatment including preparation of surfaces incl filling all cracks with approved crack filler of ceiling and applying two coats of oil emulsion distemper over a coat of alkali resistant primer and 3 mm thick wall care putty complete all as specified and directed.

M&L for preparation of old painted steel surfaces and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L Preparation of old painted wooden surfaces of any description, not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

Material and labour for preparation of newly plastered surfaces of ceiling and applying two coats of oil emulsion distemper over a coat of alkali resistant primer and 3 mm thick wall care putty complete all as specified and directed.

S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65 x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.

S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65 x 125 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.

Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 35mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately)

M&L for two coats of synthetic enamel paint over a coat of pink primer including preparation of wooden surfaces exceeding 10 CM girth or width complete all as specified and directed.

S & F powder coated (Min thickness of powder coating 50 microns) Anodiesed aluminium frame for doors, windows ventilators with one or more rebets including jointing cleats for fixing etc complete all as specified & directed.

S & F Vertical loadline type TPN DB 4 way double door with prov of MCCB as incoming 4P, made out of CRCA sheet housing duly powder coated & confirming to IS specification with busbar rating not less than 250 A complete all as specified and as directed . Make :- C&S Cat No : CSDBMCCB225DD04IP43S / Havells Cat No. : DHDLVDRWAOFO04 / Legrand Cat No.: 5077 55 DPX³ 250+12.. Note :- MCCB shall be measured and paid separatly.

S & F powder coated (Min thickness of powder coating 50 microns) Anodiesed aluminium window and ventilator shutters, sliding type without sash bars aluminium sections weighing 0.55Kg per M including necessary jointing cleats, glazing chips, rubber packing, anodised aluminium snap beading, screws anodised aluminium fittings such as suitable handle (1No) complete all as specified.&directed.

S&F 18 mm thick plywood BWR type fixed with screws with timber framework complete all as specified and directed.

Material and labour for 1 mm thick colour / white laminated sheet fixed to wooden surface with glue complete all as specified and directed .

S&F powder coated (Min thickness of powder coating 50 microns) Anodised aluminium door shutters,aluminium section weighing 0.55 kg/ m including necessary oining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified

S&F 100 mm long stainless steel butt hinges complete all as specified.

S&F 150mm size stainless steel handles, fabricated type complete all as specified.

S&F 150mm long stainless steel barrel tower bolt of extruded section complete all as specified.

M&L for stainless steel sliding door bolt with hasp staple (bolt type) length 300mm fixed complete all as specified

Supply and fix aluminium composite panel sheet of 3 to 4mm thick as in cupboards, wall cladding & false ceiling fixed on aluminium frame work with plastic strips (Double sided sticker) of suitable size of v

arying thickness of 10mm to 30mm excluding aluminium frame work applying adhesie over aluminium screws. The joints in panels shall be filled with weather proof sealant, the board shall be stuck with a layer of any colour high intensity reflective grade polymer sticker installed using epoxy adhesive complete all as specified and as directed.

S&F continuous (piano) hinges 30 mm width of flap, brass, bright finish or electrogalvanised complete all as specified and directed.

S&F 40mm dia cupboard knobs fixed with nuts screws and washers of brass polished complete all as specified and directed.

S & F tinted glass ordinary quality 5.5mm thick and glazing with oil putty/glazing clips/beadings if required of any description complete all as specified and as directed.

Supply and fix Stainless steel Telescopic type ball bearing drawer channel of any size complete all as specified .

S&F floor door stopper of stainless steel body & tongue, with hard drawn spring of 140mm size fixed in floor complete all as specified and directed

S&F stainless steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.0 mm and fixed with stainless steel wire staples complete all as specified and directed .

S&F in repair 20mm dia Stainless steel Decorative type draphery curtain rods with brackets and side globes of approved quality for each length of rod complete all as specified and as directed .

Supply and fix 100 mm long stainless steel decorative handle fixed with screws complete all as specified .

Supply and fix 200 mm long stainless steel hinge for cabinets auto close , concealed type complete all as specified .

S&F for brass mortoice lock with 4 lever vertical type size 100mm

Supply and fix Stainless steel kitchen basket of size 17" X 20" X 4" size complete all as specified .

Supply and fix Stainless steel dust bin holder 10 " dia complete all as specified and as direcetd .

Supply and fix stainless steel bottle pullout of size 106 mm X 476 mm X 130 mm complete all as specified .

Supply only integral liquid water proofing compound complete all as specified and directed.

Supply and fix in repair bathroom mirror cabinet PVC of size 400 X 500 mm fancy type complete all as specified and as directed .Make : Cat No-554 of Prayag or equivalent .

M&L for applying two coats of synthetic enamel paint over a coat of red oxide , zinc chrome primer including preparation of new steel surface of any description over 10 cm width and girth complete all as specified.

S&F in repair CP Soap dish fixed with chromium plated brass screw complete all as specified and directed.(Make : Jaquar cat No ACN-CHR-1131N or equivalent )

S&F in repairs toilet paper holder fixed with chromium plated fixed with brass screw complete all as specified.(Make : Jaquar cat No CPA-CHR-1153 or equivalent )

M&L for Mild steel Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to e.290.Gde-E-165 complete all as specified and directed .

S&F in repair vitreous china wash down water closet (pedestal pattern) any type with plastic seat and cover including PVC low level flushing cistern 10 ltrs capacity complete as directed by Engr-in-Charge. (Make : Jaquar cat No CNS-WHT-551PSPP or equivalent )

S & F in repairs, vitreous china bowl urinal, white,half stall type, with grating & union for discharge pipe, complete inc. providing & fixing plugs, bedding urinal against wall in CM 1:2, inc. 60mm long brass screws, pointing around urinal back in cement, complete all as specified and as directed.(Make : Jaquar cat No URS-WHT-13261H or equivalent )

S&F in repairs concealed stop cock but fancy type 15mm dia, chromium plated with long shank and cup (concealed type).

Supply & fixing in repair vitreous china wash basin oval type , white size 605x430X 200 mm embedded in grainite top and including PVC connection pipe 15 mm bore 450 mm long , CP waste coupling , Bottle trap complete all as specified and directed.(Make : Jaquar cat No CNS-WHT-705, ALD-CHR-805B, ALD-CHR-709, ALD-CHR-769L250X190 or equivalent )

“S&F 600mm x 450mm seamless bevelled edge mirror mounted on stainless steel studs and fixed with ss screws on wall complete all as specified and s directed”.

S & F in repair 15mm bore Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed. Make : Cat No:CON-107 KN of Jaquar or equivalent .

S & F in repair 15mm bore dia. pillar taps (fancy type), cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered ‘Hot' or ‘Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete. ..Make : Cat No:CON-021KN of Jaquar or equivalent .

S&F in repair angle valves cast copper alloy, screwed down high pressure fancy type chromium plated 15 mm dia with long shank and cup (concealed type) all as directed by Engr-in-Charge. Make : Cat No:CON-059KN of Jaquar or equivalent

Supply and fix in repair CP health faucet with 01 Mtr tube and hook complete all as specified and as directed .Make : Cat No:ALD-579 of Jaquar or equivalent .

S&F in repairs two way bib cock cast copper alloy fancy type screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for union and fixed for 15mm bore of pipe with long shank and cup (Make : Prayag Cart Part No PIS-12 H)

S&F in repair three way wall mixer with hand shower connecting legs & wall flanges complete all as specified and as directed.Make : Wall mixer Cat No: FLR-5281 of Jaguar or equivalent & Hand shower Cat No: HSH-CHR-1781 of Jaguar or equivalent.

Supply and fix in repair 150 X150 mm overhead shower complete all as specified . Make :Cat No:OHS-CHR-1605 of Jaquar or equivalent .

S&F in repairs stainless steel grating of 125 mm dia chromium plate grating for nahani traps with or without hole for waste pipe complete all as directed

Supply and fix in repair shower arm 400 X 25 X25 mm square shape for wall mounted shower complete all as specified .Make : Cat No:SHA -455L400 of Jaquar or equivalent .

S & F in repair tubular towel rail 20 mm dia ‘D’ type 60 cm long between flanges of brass chromium plated.(Make : Jaquar cat No CPA-CHR-1111 or equivalent )

S&F in repairs CP towel rings fixed with and including plated brass screws and wooden/plastic cleats (minimum weight 90 gms) complete all as specified and as directed by Engineer-in-Charge. (Make : Jaquar cat No ACN-CHR-1121S or equivalent )

S&F in repairs PVC connection 15 mm dia and 600 mm long with both and nuts (Make : Jaquar cat No ALD-CHR-805B or equivalent )

S&L in repairs CI floor trap with grating incl jointing to waste pipe with dia of outlet 75mm complete all as specified and directed.

Demolition and beaking up drain AC pipes/PVC pipes/CI Pipes set in cement mortar of any dia and size complete all as specified and directed.

S& F for 20mm bore CPVC pipe outer dia of pressure ratings 11 SDR-II including all fittings fixed complete to walls, ceiling or in floor etc including taking down of old tubing of any description complete.

S& F for 25mm bore CPVC pipe outer dia of pressure ratings 11 SDR-II including all fittings fixed complete to walls, ceiling or in floor etc including taking down of old tubing of any description complete.

Cutting Chases , pinning in , making good to facing where required and pointing in CM 1:3 to ends or edges of landings , steps , cills , sunshades , shelves , lintels etc and cutting chases for concealed water tubing or concealed conduit wiring etc and making good of cutting in brick wall n.exc 10 cm girth complete all as specified .

S&F PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls/floor bore of the pipe 110 mm complete all as specified and as directed.

Supply and fix in repair 110 mm bore PVC (SWR) junction single ( single 'T') equal or unequal complete all as specified .

Supply and fix in repair 110 mm bore PVC (SWR) Vent Cowl complete all as specified and as directed .

Dismantling water tanks of exc 500 but n.exc1000 ltr capacity and removing to store complete all as specified and directed.

S&F in repairs PVC (SWR) bends 110 mm complete all as specified and directed.

S&F of rotational moulded poly thylene water storage tank (cylindrical vertical with closed top) hoisted and fixed in position of capacity 1000 Ltrs complete all as specified and directed.

S&F PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls/floor bore of the pipe 75 mm complete all as specified and as directed.

S&F in repairs Gun metal globe or gate valves of 20 mm dia with iron wheel head screwed both ends for iron pipe complete all as specified and as directed.

S&F in repairs PVC (SWR) bends 75 mm all as specified and as directed.

Hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones complete all as specified and as directed.

S&F 3mm thick sheet glass ordinary quality fixing with putty in square not exceeding 0.5 Sqm in each pane. complete all as specified and as directed.

Dismantling water tanks of exc 250 but n.exc500 ltr capacity and removing to store complete all as specified and directed.

S&F of rotational moulded poly thylene water storage tank (cylindrical vertical with closed top) hoisted and fixed in position of capacity 500 Ltrs complete all as specified and directed.

S&F in repair 20 mm Ball brass valves. high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule complete all as specified and dir

S&F TMT bars 10 mm dia and over and cut to length bent to shape required including cranking, bending, hooking ends and bending with MS wire not less than 0.9mm dia or securing with clips quality conforming complete all as directed.

S&F in repairs sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratary with plugs washer and wastes including bedding in cement mortar to drawf wall or including fixing cantiliver brackets and connecting union to pipes overall size 915 mm x 460 mm bowl size 410 mm x 330 mm x 160 mm complete all as specified and directed.

S&F in repairs sinks without drainage board made of stainless steel 1 mm thick kitchen or laboratary with plugs washer and wastes including bedding in cement mortar to drawf wall or including fixing cantiliver brackets and connecting union to pipes overall size 495mm x 420 mm bowl size 410 mm x 330 mm x 160 mm complete all as specified and directed.

ected.

Demolition of Reinforced Cement Concrete of any description and in any position not otherwise specifically provided for slab,shelves etc complete all as specified and directed

Use and waste of Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick

M&L for RCC type B1 1:2:4 (using 20mm graded aggregate as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified.

Supply and fix in repair CP Quarter Turn Sink Cock with regular swinging spout ( wall mounted model ) with wall flange complete all as specified .Make : Cat No-FLR-5347N of Jaquar or equivalent .

Excavation in trenches n.exc 1.50 m wide and n.exc 1.50-m deep for foundation,etc, or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sqm on plan and n exc 1.5m in depth and getting out in soft /loose soil complete all as specified and directed.

M &L for cement concrete type C2 1:3:6 (using 40mm graded aggregate as in foundation filling and mass concrete complete all as specified and directed

M &L for precast cement concrete block masnory with solid blocks exc.10cm in width using PCC 1:3:6 type C1 using 20mm graded aggregate set in CM 1:4 complete all as specified and directed.

M&L for pre-cast reinforcement cement concrete (1:2:4) Type B-1, using 20 mm graded stone aggregate as in cover slab for manholes etc.and set in cm 1:6

S & F mild steel TMT bars 6mm to 8 mm dia cut to length bent to shape required including cranking bending etc TMT bars.

M&L Plain Cement Concrete Type B1 1:2:4 (using 20 mm graded granite stone aggregate) as in benching of man holes including forming centre channels half round or 1/4 section.

M&L for 150mm dia Reinforced concrete pipes, class np2 laid and jointed in CM 1:1.complete with collars

M &L for PCC 1:3:6 type C2 as in bed to drain pipes incl packing under and haunching against the sides of pipes after they are laid and tested for CI pipe 150 mm bore.

M &L for 15 mm thick rendering in CM1:4 on concrete surfaces finished fair and even and smooth without using extra cement.

Returning, filling in incl spreading n levelling watering and well ramming in layers

Removing excavated materials to a dist n.exc 50- m and depositing where directed at a level n.exc 1.50 m aabove the starting point.

Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement.

S&F Aluminium powder coated cubicle curtain track electrically insulated, easily bendable weighing not less than 0.498kg/m suitable for wall or ceiling mounting including hooks or suitable arrangement for hanging curtain fixed as per manufacturers instructions complete all as specified and directed

S&F in repairs stainless steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.0 mm and fixed with stainless steel wire staples complete all as specified and directed .

Taking down existing unserviceable point wiring of any type/ size of light/fan/power/two way/bell etc on TW batten/conduit including removal of batten / conduit / gutties / wooden boards / switches / sockets / regulators etc and removal of unserviceable material out of site area all as specified & directed by Engg-in-Charge.

Taking down existing unserviceable light fittings, security light fittings, bulk head fittings, fall ceiling light fittings etc. from any height of building complete all as specified & directed by Engg in Charge.

Taking down existing unserviceable MCB's/MCCB's/Distribution boards any capacity complete all as specified & directed by Engg in Charge.

M & L for Point wiring complete with two runs of 1.5 Sq mm (for Phase and neutral) PVC insulated unsheathed multi stranded ,copper conductor FRLSH cable of 1100V grade drawn through and including new non metallic rigid PVC concealed conduit medium grade , ISI marked , 20 mm bore with conduit accessories for wiring concealed in wall, including provision of fabricated branded pressed steel terminal box concealed of suitable sizes with 1.6mm thickness including modular cover frame & box of suitable size for modular switch boards/sockets/regulators of any size modules for housing modular switches, sockets, fan regulators etc and provn of 1.5 Sqmm PVC insulated unsheathed copper conductor cable of green colour to common earth dolly etc. complete all as specified and as directed for one light point controlled by one switch. Note : (1) The wiring shall be done in proper color coding using red, yellow, blue for phases, black for neutral and green for earth. (2) The cost of cutting & chases required width and depth for concealled conduit including PCC plastering,POP putty, making good to disturbed surface, distemper painting two coats to match the existing wall colour is deemed to be included in the quoted rate by the contractor. (3) Three runs wire & one run of PVC conduit,metal Sunken box, modualr frames & connected accessories shall be measured as one point

All as per Sl item No 158 above but for One ceiling fan/exhaust fan point controlled by one switch through regulator.

All as per Sl item No 158 above, but for One 5 Amps socket outlet point on the independent board.

All as per Sl item No 158 above, but for One 5 Amps socket outlet point on the same board.

All as per Sl item No. 158 here in before, but for One Bell point controlled by one, bell push

All as per Sl item No 158 above but for One light point controlled by two way switch

All as per Sl item No. 158 here in before, but for wire 2.5 Sqmm for Power point.

S & F Switch Modular type 1 Module 6 Amps, 230 volts all as specified and as directed.

S & F Switch Modular type 1 Module 16 Amps, 230 volts all as specified and as directed.

S & F Switch Modular type 2-way, 1 Module 6 Amps, 230 volts all as specified and as directed.

S & F Bell Push Switch Modular type 1 Module, 230 volts all as specified and as directed.

S & F Socket Modular type 2 Module 6 Amps, 230 volts all as specified and as directed.

S & F Socket Modular type 2 Module 16 Amps, 230 volts all as specified and as directed.

S & F Elctronic Regulaor Modular type 2 Module, 230 volts all as specified and as directed.

S & F Electric Bell Ding-dong working on 230 volts AC Supply complete all as specified and as directed.

S & F ceiling rose three terminal surface bakelite type AC 50 Hz 230 volts of size 65 x 50 mm complete all as specified.

S & F lamp holder suitable for B-22 base lamps insulated body surface bakelite with back plate suitable for angle / batten fittings complete all as specified and as directed

S & F 15 Watt LED Bulb 3 star rated efficacy not less than 100 Lumen/watts,rated life 25000 burning hours with lamp holder insulated body surface bakelite with back plate suitable for angle / batten fittings including taking down the old unserviceable all as specified and directed by Engr-in-Charge.

S & F 20 W surface / wall mounted LED batten light fitting aluminium extrusion input voltage range 250 V, input frequency 50 Hz, efficacy not less than 120 Lumen/Watt, rated llife 50000 Burning hours including 2 nos PVC Connector blocks electrical connection with 3 core flexible Cu conductor cable of appropriate size from ceiling rose to the fixture complete all as specified and directed by the engineer-in-charge. Make: Crompton CCS-100-20-65-HSL2-DP-NWH/ PHILIPS BN308CLED20S-6500L120PSUWH / WIPRO LL31-251-XXX-65AL5/Havells ENDURALINEARPROBS20WLED865PCSSIND/Bajaj-BCLAB20WCWLEDXT

Taking down existing LED Batten light fitting for Re-Fixing at specified location after repairs to wall/ceiling complete including connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete.

S & F 10 W surface / wall mounted 2 feet LED batten light fitting input voltage range 250 V, input frequency 50Hz, efficacy not less than 100 Lumen/Watt rated life 25000 burning hours including

2 nos PVC Connector blocks electrical connection with 3 core flexible Cu conductor cable of appropriate size from ceiling rose to the fixture complete all as specified and directed by the engineer-in-charge. Make:Crompton CCS-103-10-65-SL-DP-NWH/ Havells LHEXAZP7PN1W010 / PHILIPS BN021LED12S 6500K PSU GR / WIPROLL20-111-XXX-65NE3 /Bajaj-BCLAB10WLEDCWLED

S & F LED light fitting 10W bulkhead luminaires, efficacy not less than 100 lm/w, rated life 25000 burning hours including LED light driver holder connecting up with three core flexible copper conductor cable IP 65 out door type metal body of suitable size complete all as specified and as directed by Engr-in-Charge. Make: Crompton CIS-306-10-57-SL-DP-NBK/ PHILIPS WT202W LED10S CW PSU S3 PC/ HAVELLS HEXAFT10WLED857SSYMBOPC /WIPRO LW07-141-XXX-57-G1/Bajaj-BIBWP10W LED

S&F wall mounted flexible rotary type bed side reading lamp of capacity not more than 10 watts including necessary electric connection complete all as specified and directed by E-In -Charge . Make: Syska cat Part No:SSK-TRS 6W/Shakti cat Part No:SZWRFPX003/Havell cat Part No:LHEXCIPBPN1K004/Fortune arrt cat Part No:TSR10/8/Luker cat Part No:LSP07NBK

S & F recess mounting LED down light fitting 2' x 2' of capacity 36 Watts powder coated white CRCA full glow,efficacy 120 lumen/watts rated life 50000 burning hours suitable for false ceiling pop/grid ceiling including making electrical connection from ceiling rose to light fitting complete all as specified and as directed by E-In-Charge . Make:Crompton: LCTLRP-36-FO-CDL / PHILIPS RC308LED36S6500 / HAVELLS VENUSEXL2X2PLR36WLED865SWH /WIPRO-CRCO10R036HE57G4/Bajaj-BZRSQL43LXEWHODSD

Taking down existing LED luminaire 600 mm x 600 mm, 36 watt, for Re-Fixing at specified location after repairs to false ceiling complete including connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete.

Supply and fixing LED security light fitting 45 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant,efficacy not less than 120 lm/Watts,rated life 50000 burning hours complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection with wall mounting bracket arm OD 35 mm to 42 mm including necessary electrical connection to the fixture with 3 core flexible Cu conductor cable of appropriate size and 1.5 m long bracket, having 40 mm diameter light grade GI pipe, including GI clamps, nuts, bolts & washers with two coats of synthetic enemal paint over a coat of red oxide primer complete suitable for pop/grid false ceiling in all respect as specified and directed by engineer-in-charge.complete in all respect as specified and directed by engineer-in-charge. Make:Crompton TRP-409-45-57-SL-GL-NSG / PHILIPS BRP331LED48CWR5NPCPSUS1V1 / HAVELLS ENDURASUNDOWNSL45WLED765PASYBOPC /WIPRO LR22-501-XXX-57-XX/Bajaj-VISTAP45LWHPOPCSD

Taking down existing LED Bldg Security light fitting for Re-Fixing at specified location after repairs to wall/ceiling with existing GI pipe complete including connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete.

Supply, lay, testing and commissioning of BHP (Bed head panel) 4 ft long made out of 1.6 laminated aluminium sheet die pressed in such a shape that looks good as per requirement.The modular medical turn king system/bed head panel: would be fabricated of aluminous die pressed 1.6 mm thick imported laminated sheet in such a way to provide 100% safe and efficient means to deliver all the gases as well as electrical to the patient/staff in intensive care conditions. To enclosed all piping, electrical wires, monitor wire ect it would be fitted continuously running on wall. The design of modular BHU would consist of aluminum section to meet the requirement of HTM 2002, NFPA and other international standard. It would have separate duct for medical gases as well as electrical. There would be no sharp edges having smooth finish and without any visible Reciprocatings etc.It would be have ability fix medical gas outlets, electrical multi-pin sockets outlets-04 Nos (2x5Amps & 2x15 Amps), nurse’s call bell, IV fluid’s saline etc.. MAke :- medial Elaborate Concept / APS Lab Equipment Pvt Ltd. / Modular Health Care Pvt Ltd. / ASB Systems / Hospedia Medicare Pvt Ltd. Note :- Anyy addition / alteration require to connect existing copper tube of Medical gas to accommodate the gas outlets with the new BHP will be done by the contractor and no extra cost will be paid.

S & F MCB SP 6 to 32 Amps 240 volts C- type all as specified and as directed

S & F MCB SPN 40 to 63 Amps 240 volts C- type all as specified and as directed

S & F in replacement sheet metal enclosure MCB DB SPN 2 way, 240 volts double door with locking system complete all as specified and as directed . Make :- Havells, Legrand, Standard.

S&F MCCBs 415V, 36KA, 160 Amps 4 Pole suitable for V-TPN including removing the existing unserviceable one all as specified and as directed. Make :- Havells, Legrand, Standard..

S & F TPN DB 4 way double door with MCB 4P as incoming, made out of CRCA sheet housing duly powder coated & confirming to IS specification complete all as specified and as directed . Make :- C&S Cat No.: CSDBTPNHDD04 / Havells Cat No. : DHDNTHCDPW04 / Legrand Cat No. : 5076 60 Note :- MCB TPN shall be measured and paid separatly.

S & F MCB TPN 40 Amps 440 volts all as specified and as directed complete all as specified and directed.

Single pole and neutral enclosure with a two pin and earth plug and socket complete with one double pole MCB 20 Amps complete all as specified and directed.

S & F Power Unit for AC with one 25 Amps socket, (incl 3 pin plug Top 25 Amps) one electronic starter 25 Amps and one MCB SPN 25 Amps 'C' curve all accessoroes shall be fixed in one six module metal GI box, frame and cover plate and electrically connecting up as per Havells Cat No. DHDUCDP0253025 / Indo Asian Cat No: 810685 / Legrand Cat No.: 679272.

M & L Submain wiring concealed in wall with 4 runs of single core 10 sqmm PVC insulated FRLS multistranded 1100 volts grade wire, copper conductor drawn through and including non-metalic rigid PVC conduit and conduit accessories of medium grade not not less than 32mm dia including one run of single core 10 sqmm PVC insulated sheated multistranded 1100 volts grade with copper conductor cable as earth continuty conductor along with the wiring and connected from DB to DB/main board including removing the existing unserviceable submain wiring complete all as specified and as directed.

All as per Item Sl No 195 above but using 3 runs of single core 10 sqmm.

All as per Item Sl No 195 above but using 3 runs of single co

re 6 sqmm.

All as per Item Sl No 195 above but using 3 runs of single core 4 sqmm. (for AC Point)

All as per Item Sl No 195 above but using 3 runs of single core 1.5 sqmm. (for Bldg Security Lights)

Disconnection and removing the existing unserviceable earthing and M & L of Earthing complete with galvanised steel earth plate electrode 60cm x 60cm x 6mm thick burried directly in ground to a depth not less than 2.25 m below ground level with top edge of earth plate not less than 1.5 m below normal ground level connected to GI earth lead wire 4 mm dia by means of bolts, nut, check nuts and washers etc of galvanised iron and earth lead protected by provision of GI pipe 15 mm bore of medium grade from earth electrode to DBs/Main switch all as shown in Electrical Plate No 3 of SSR Part I and connected to main switch board including excavation and earth work in any type of soil, PCC chamber in 1:2:4 Type B-1 using 20 mm graded stone aggregate 75 mm thick RCC cover in 1:2:4 type B-1 reinforced with 6mm dia bars at 75mm c/c both ways with 12mm dia MS bar handle made to shape, 20 mm dia medium grade GI watering pipe perforated at bottom with funnel and wire mesh, common salt and charcoal filling complete including testing on completion all as specified. (Note: GI pipe 15mm dia & GI earth lead 4mm dia upto 7.5 m length is deemed to be included in quoted rate).

Each Set