Development of all major roads (strengthening, widening, beautification and horticulture work) from PWD rest house to old bus stand including all cross roads form NDRI boundary wall to railway road.(Recall)

Providing and applying tack coat with penetration grade bitumen VG - 10 using bitumen pressure distributor at the rate of 0.30 kg per sqm on the prepared bituminous/ granular surface cleaned with mechanical broom as per technical clause 503 of MORT and H specifications.

Recovery of milled bituminous material (RAP) from existing road surface using cold milling machine, including collection, loading, stacking at site or transporting to designated place within specified lead, complete as per directions of Engineer-in-Charge.

Providing and applying tack coat with penetration grade bitumen VG-10 pressure distributor at the rate of 1.0 kg per sqm on the prepared granular surface cleaned with mechanical broom as per technical clause 503 of ORTandH specifications

Providing and fixing of M.S. jali reinforcement of galvanised steel wire with hexagonal/ square/ rectangular opening 1.5` X 1.5` including straightening and laying the same of the surface of deep intact condition and also including cutting to proper size and necessary stiching with galvanized wire of same dia etc. complete and fixing with 3/4 furniture nails as per specifications and direction of Engineer-In-Charge

Providing and laying 50mm -75 mm dense graded bituminous macadam with 100-120 TPH batch type HMP producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder VG 30 @ 4.5% by weight of total mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction complete, as per technical clause No. 505 of MORTandH specifications

Providing and applying tack coat with penetration grade bitumen VG -10 using bitumen pressure distributor at the rate of 0.30 kg per sqm on the prepared bituminous/ granular surface cleaned with mechanical broom as per technical clause 503 of MORTandH specifications

Bituminous Concrete 30 mm to 45 mm thickness (grading II) with100-120 TPH batch type HMP Providing and laying 30mm - 45 mm bituminous concrete with 100-120 TPH batch type hot mix plant producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder VG - 30 @ 5.4% per cent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction complete as per technical clause 507 of per MORTH specifications

Providing and fixing boundary enclosure in Red Sandstone (Agra stone) Planter (3.45m X 1m X 0.5m) on all four sides of garden bed, including supply of materials, labour, tools and plants, comprising 75 mm thick dressed Red Sandstone border/coping laid all around ,50 mm thick Red Sandstone jali panels fixed between stone pillars, properly dressed and aligned,Red Sandstone pillars at corners and at required intervals, embedded minimum 400 mm below ground level and fixed in cement concrete 1:2:4, including excavation and refilling

Providing and fixing boundary enclosure in Red Sandstone (Agra stone) Planter (3.45m X 1m X 1.2m) on all four sides of garden bed, including supply of materials, labour, tools and plants, comprising 75 mm thick dressed Red Sandstone border/coping laid all around ,50 mm thick Red Sandstone jali panels fixed between stone pillars, properly dressed and aligned,Red Sandstone pillars at corners and at required intervals, embedded minimum 400 mm below ground level and fixed in cement concrete 1:2:4, including excavation and refilling

Recovery of Paver Blocks