Electrical Works

Supply and fixing of 65 mm dia. (2 -1/2") GI pipe (class B) of 6 metre length with 300mm x 300mm x 6mm MS base plate duly welded at the bottom with concreting with construction of masonary pedestal with suitable SMC box with door arrangement to house 6A SP MCB switch, 2/4 way connector on suitable hylem sheet and supply and fixing of 60W LED street light fitting with LED (Lower end) with 4 metre 32mm dia. GI pipe (class B) (3 metres for Cable incoming to SMC box & Cable out going to Next Post)(i.e.)(2x1.5=3 mtrs)Complete with suitable MS clamps for LED steet light fitting and SMC box with PVC unsheathed copper leads from SMC box to fitting and with painting of suitable colour

Supply and fixing of 60W LED street light fitting with LED (Lower end) with 32mm dia. GI pipe (class B) with 1 no.32 mm GI bend complete on the existing post/ on wall with PVC unsheathed copper leads with MS clamps and with painting

Supply and fixing of 32 A FP MCB in sheet enclosure in open on wall with earth connection [Legrand (MDS) / Hager (L&T) make]

Supply and clamping of 31/2 x 35 Sqmm PVC LTUG armoured LTUG cable on post or on wall with MS clamps

Supply and Laying of 3 1/2 x 35 sq.mm. PVC armoured LTUG cable in suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make good.

Supply and fixing of brass cable gland for 3 ½ x 35 Sqmm PVC armoured LTUG cable with earth connection.

Supply and providing cable end termination of 3 ½ x 35 Sqmm PVC LTUG Aluminium armoured cable with necessary aluminium cable sockets by crimping etc.,with electrical connection complete

Supply and Laying of 3 1/2 x 50 sq.mm. PVC armoured LTUG cable in suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make good.

Supply and clarnping of 3 1/2 x 50 sq.mm. PVC LTUG armoured cable on post or on wall with MS clamps

Supply and fixing of brass cable gland for 3.5 x 50 sqmm PVC armoured LTUG cable with earth connection.

Supply and providing cable end termination of 3-1/2 x 50 sq.mm. PVC LTUG aluminium armoured cable with necessary aluminium cable sockets by crimping etc with electrical connection complete.

Removing the existing HighMast pole near ward No 26,reerecting the HighMast pole near training centre by providing the necessary concrete foundation with 1:2:4 mix RCC concrete with 30 cm projection above the ground level with 1 Metre width x 1 Metre Length and 2 Metre depth with necessary galvanized foundation bolts nuts and washers and dump plate enclosing the bolts for the High Mast considering the safe soil bearing capacity at site, FounFeeder pillar box comprising 0.90 m x 0.45m x 1.20m floor AI frame with 63 A TPN main switch 1 no , 63 A fuse unit 3 nos. , 63 A power contactor with automatic timer arrangements and reversing starter for the 3 phase motor. High powered power tool complete with hand held control panel and motor with push button type remote control switch suitable for 3 phase 415 V 50 HZ for raising and lowering of the lantern carriage complete to operate all fittings mounted in the base to couple with winch with Supply and fixing of 8 nos 200Watts LED flood light fittings Neon Aviation Lights with Connecting wires ,Hot dip galvanized lightning arrestor with 2 nos. of special GI earth electrodes including transporting,Lifting crane charges Labour charges,etc.,

Earthing as per the ISI specification with an earth electrode of 2.10 metre Class 'B' GI pipe of dia not less than 40 mm with copper earth plate of size 125 mm x 50 mm x 6 mm with necessary funneling arrangements with necessary masonry work and with 38mm RCC cover slab for the brick masonry

Supply and run of 1 of No.8 SWG GI wire for earth connection

GST at 18%

Please Enable Macros to View BoQ information