Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹10.5 CrAccepted-AOC | ₹10.5 Cr Quoted ₹10.7 Cr | L1 | Accepted-AOC Lowest |
| 2 | L2₹11.2 CrRejected-AOC | ₹11.2 Cr | L2 | Rejected-AOC Not Lowest |
Tender Value
₹6.5 Cr
EMD Value
₹6.5 L
Closing Date
5 Aug 2022, 6:00 pmClosed
Chief Engineer Jalandhar Zone Jalandhar Cantt
Chief Engineer Jalandhar Zone Jalandhar Cantt
Completion of incomplete and balance work for Provision of OTM accn and other connected Items (Ph-I) at Suranussi under GE Kapurthala
2022_MES_506368_1
81028/E8
Open Tender
Civil Works
365 days
Kapurthala
All documents as per NIT
8 documents required · 8 mandatory
₹3,000
Garrision Engineer Kapurthala
₹6.5 L
29 Sept 2022
28 May 2022
13 Aug 2022
28 May 2022
5 Aug 2022
8 Jul 2022
Amount
Note: (i) Please refer Schedule 'A' Notes given on serial page No. 23, 24(R), 25 to 28 of tender documents.
LUMPSUM/ OTHER PRE-PRICED PROVISIONAL SCHEDULES OF WORKS
Lump sum price worked out by the contractor for BUILDING WORKS as listed in Schedule 'A' Part-I (Sec-I) brought forward from serial page No. 30
Lump sum price worked out by the contractor for PARTIALLY COMPLETED BUILDING WORKS as listed in Schedule 'A' Part-I (Sec-II) brought forward from serial page No. 31
Lump sum price worked out by the contractor for INTERNAL ELECTRIFICATION WORKS as listed in Schedule 'A' Part-II brought forward from serial page No. 34
Lump sum price worked out by the contractor for INTERNAL WATER SUPPLY WORKS as listed in Schedule 'A' Part-III brought forward from serial page No. 35
Lump sum price worked out by the contractor for SEWAGE DISPOSAL WORKS listed in Schedule 'A' Part-IV brought forward from serial page No. 36
Lump sum price worked out by the contractor for ROAD, PATH, DUNNAGE, HARDSTANDING (FIRE BREAK) WORKS as listed in Schedule 'A' Part-V brought forward from serial page No. 38
Lump sum price worked out by the contractor for AREA DRAINAGE WORKS as listed in Schedule 'A' Part-VI brought forward from serial page No. 39
Lump sum price worked out by the contractor for RAIN WATER HARVESTING WORKS as listed in Schedule 'A' Part-VII brought forward from serial page No. 40
Lump sum price worked out by the contractor for LIGHTENING PROTECTION WORKS as listed in Schedule 'A' Part-VIII brought forward from serial page No. 42
Lump sum price worked out by the contractor for EXTERNAL WATER SUPPLY WORKS as listed in Schedule 'A' Part-IX brought forward from serial page No. 45
Lump sum price worked out by the contractor for EXTERNAL ELECTRIFICATION WORKS as listed in Schedule 'A' Part-X brought forward from serial page No. 49(R)
Lump sum price worked out by the contractor for DG SET WORKS as listed in Schedule 'A' Part-XI brought forward from serial page No. 50
Lump sum price worked out by the contractor for SITE CLEARANCE AND EARTH WORK as listed in Schedule 'A' Part-XII brought forward from serial page No. 51
INTERNAL ELECTRIFICATION WORKS
S&F flame proof sheet metal enclosure double door TPN 4 way of suitable size with following:- (a) MCCB FP-160 amps -25 KA-01 No (Incomer) (b) MCCB FP -100 amps -16 KA-02 Nos( For Cranes) (c) MCCB SP- 10 to 20 amps- 04 No (for Buildings)
S&F flame proof totally enclosed exhaust fan 450mm sweep single phase fixed to position complete all as specified.
S&F flame proof junction box of 3/4” size complete all as specified.
S&F ceiling fan of 1200mm sweep complete including provision of cord flexible copper conductor three core from connector to ceiling rose and provision of fan hook complete all as specified.
S&F exhaust fan heavy duty with louvers 230mm sweep with bolts, nuts and washers size of the bolt 15cm long 12mm dia embedded in the wall including provision of PVC flexible copper cable of size 23/0.0076 three core from ceiling rose to exhaust fan for giving connection complete all as specified. Make: Cromtom greaves/ Havells/ Bajaj/ Usha Note: Cost of suitable opening with frame in wall for fixing exhaust fan is deemed to be included in unit rate quoted against building work in Sch A Sec-I.
Supply and fixing LED security light fitting 35 Watt 230 Volts AC outdoor type with high pressure die cast aluminium housing and heat resistance complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete with all accessories and 32mm dia bore GI pipe mounting bracket not exceeding 1.5 mtrs long consisting with MS clamps made out of 40x6mm MS flat with bolts and nuts of appropriate size including necessary connection with 3x1.5 sqmm PVC insulated stranded copper cable not exceeding 2 mtr long from ceiling rose complete.
EXTERNAL WATER SUPPLY WORKS
Boring with reverse rotary rig circulation method including electronic logging through any kind of strata of soil/ rocks for drilling not less than 650 mm dia hole for depth not exceeding 75 metres deep below ground level by keeping sufficient space for packing pea gravel complete all as specified.
All as per srl item No 4.01 above but depth exceeding 75m but not exceeding 150 metre below ground level.
All as per srl item No 4.01 above but depth exceeding 150m but not exceeding 225m below ground level.
All as per srl item No 3.01 above but depth exceeding 225m but not exceeding 300m below ground level.
Supply, assembling, jointing and lowering into bore hole 350mm (14”) dia MS casing pipe with 8mm wall thickness externally threaded socketed and welded by welding of 30 x 6mm FI strip 45cm long 3 No. at each joint ERW in random length of 6 metre or as required ISI marked including necessary fittings and jointing upto 100metre depth from ground level and painting with two coats of anti corrosive paint on external surface of pipe before lowering complete all as specified.
All as per srl item No. 4.05 above but size of MS casing pipe of dia 250mm (10”) with 8mm wall thickness ISI marked and jointing upto boring depth exceeding 100metre but not exceeding 300metre below ground level complete all as specified.
Supply, assembling, jointing and lowering into bore hole low carbon galvanized strainer 250mm (10”) bore (at a depth exc. 100mtr but n. exc. 300metre) minimum wall thickness 8mm including externally threaded mild steel socket as per latest ISI having slots to suit the size of sand grain including fitting, jointing the MS casing and MS type 250mm bore by welding of 30 x 6mm FI strips 45cm long 3 No. painted with 2 coats of anticorrosive paint on external surface of pipe before lowering complete all as specified.
M&L 8mm thick MS bail plug of 250mm bore MS pipe having wall thickness of 8mm with strong iron hook, screwed and continuous arc welding to the casing pipe (length of pipe required to be fixed with bail plug will be measured and paid for separately) complete all as directed.
M&L centering guides made out of MS flat iron of size 40 x 6mm size made to shape with two rings at 75cm apart and three No ribs suitable for 250/ 350mm bore casing pipe complete all as directed.
M&L MS reducer of 8mm wall thickness screwed both ends of 350 x 250mm size of appropriate length including jointing screwed and socketed alongwith electric arc welding complete all as specified and directed.
M&L well cap 350mm bore having internal threads and with welded iron handle of 20mm dia MS round complete all as specified and directed.
M&L housing clamp 90cm long made out of mild steel flat iron 100mmx 10mm for 350mm dia casing pipe with necessary MS bolts full threaded nuts and washers at ground level complete all as specified and directed.
M&L packing pea gravel of size 3 to 4mm all around the casing pipe and slotted pipe in the well bore to entire depth complete all as specified. (Volume of pea gravel shall be measured as space between bore well and outer dia of pipe).
M&L 80mm bore GI pipe medium grade 6 metre long, each 4 No. in the angular shape on four sides of the bore well and 30cm above the ground level with suitable cap at the end for feeding pea gravel complete all as specified. Note: Cost of gravel feeding is not included in the item.
M&L strata box with openable sheet glass shutter 3mm thick and having internal dimensions 150mm x 100mm x 1.5 metre complete with soil sample obtained from various depth of boring with particulars like name/ number of tube well, location and depth of strata duly written including provision of strata charts complete all as specified.
Development of bore well with high capacity air compressor for a period not less than 24 hours till the water become sand or silt free including removal of surplus soil, mud to a distance not exceeding 50 metre and depositing as directed and making the site clear all as directed. (Air compressor tools and plants required for development will be arranged by the contractor and nothing extra shall be payable on this account. Cost of fuel shall also be deemed to be included in unit rate quoted by the contractor.)
Yield testing and stabilizing of the tube well by means of over pumping and measuring the yield by submersible pumping set of suitable capacity and suitable head for a period of 24 hours or more as required at site (pumping set etc shall be arranged by the contractor).
Supplying, laying, jointing & testing submersible cable 10 sqmm three core copper conductor 2 run from starter to motor drawn through flexible conduit including provision of flexible conduit in exposed area including provision of water proof/ tight jointing with submersible motor complete all as specified and directed. Note: Each run of wire will be measured and paid for separately. Cost of flexible conduit reqd will also be deemed to be included in the unit rate quoted.
Supply, lowering and jointing MS heavy duty flanged pipe 5.4mm thick 100mm bore (length not less than 3 mtr each) MS flanged not less than 15mm thick on both sides,with drilled holes and welded to MS pipe, including material and labour for jointing material with nuts, bolts, rubber packing complete all as specified and as directed.
Supply, installation and testing of submersible pump set for deep bore well having discharge 13500 GPH at head 88 metre (as per manufacturer's design nearest higher capacity available) suitable for existing delivery pipe of 150mm dia bore with star delta connection at voltage 415V (+5% & -10%) and frequency 50 HZ ±3% complete all as specified and as directed. (Note: Column pipe, submersible cable and control panel will be measured and paid for separately.
All as per srl itm No 4.20 above but of capacity 12000 GPH complete
All as per Srl item No 4.20 above but of capacity 10000 GPH complete. Notes for Srl item No 4.20 to 4.22:- (a) The pump capacity will be decided by GE after drilling of bore is complete and the yield test is carried and accordingly item of pump will be operated out of three options available vide Srl No 4.20, 4.21 & 4.22. (b) Quoted lump sum shall be arrieved at by ignoring the financial effect of item No. 4.21 & 4.22. (c) No claim on this account shall be entertained.
Supply, laying, jointing & testing ductile iron pipe ISI marked pressure pipe with socket and spigot ends, class K-7 suitable for tighten joints with pressure technology for bore of pipe 150mm including cement mortar lining inside the pipe all as per IS 8329/2000 complete (For water supply).
Supply, laying, jointing & testing ductile iron pipe ISI marked pressure pipe with socket and spigot ends, class K-7 suitable for tyton joints with pressure technology for bore of pipe 100mm including cement mortar lining inside the pipe all as per IS 8329/2000 complete all as specified.
S&F ductile iron fittings ISI marked for spigot socketed pipe such as tail piece, connecting pieces, bends tapers, tee pieces (single or double branch) any type and angle/ radius and straight connecting pieces suitable for bore upto 150mm pipe complete all as specified and directed. Note:- Fittings shall be of same make as of pipe or of make recommended by pipe manufacturer.
M&L construction of brick masonry valve pit of size 120cm x 120cm x 120cm (internal size with mild steel sheet cover 3mm thick and frame of angle iron of size 50 x 50 x 6mm duly painted with two coats of synthetic enamel paint over a coat of red oxide primer including excavation and earth work, 150mm thick PCC (1:4:8) type D-2 as in foundation brick work in cement mortar (1:6), locking arrangement and all inner size of pit shall be plastered 15mm thick in cement mortar (1:4) and coping in PCC (1:2:4) type B-1 over brick wall complete all as specified and shown drawings.
EXTERNAL ELECTRIFICATION WORKS
Supply, installation, commissioning & testing LT panel cubical type having suitable size, outdoor double type vermin proof with copper strip bus bar 200A-04 Nos made out of 3.15mm thick CRCA sheet powder coated welded to MS angle iron 40mm x 40mm x 6mm duly embedded in PCC (1:2:4) type B-2 bottom frame and legs 30cm above ground level and prewired panel board with single core PVC cable with copper conductor of suitable size and including excavation and earthwork and following accessories. Incomimg: (a) MCCB 4 pole 415 Volts 160 Amps 35 KA with adjustable thermal setting -01 No (b) Voltmeter digital type – 01 No (c) Ammeter 0-200 Amp -01 No (d) Indicator LED type 22.5mm (RYB) -03 Nos Outgoing: (a) MCCB 4 pole 125 Amps 25KA with adjustable thermal setting -01 No (b) MCB TP 30 amps -01 No (c) Change over switch 200 Amps 4 pole -01 No. (d) Three phase line protector with single phase preventor, high & low voltage and amperage protection and automatic phase reversible corrector od make Sine Track model TPPAC suitable upto cap 35 HP. (e) Fully automatic star delta starter suitable for submersible pump set of cap 35 HP-01 No.
Supply, installation, commissioning & testing diesel engine driven generating set 50 KVA 3 phase 4 wire 415 Volts 1500 RPM 50 Hz power supply with power factor 0.8 coupled directly to alternator mounted on a common base plate complete with integral acoustic enclosure having salient features such as modular bolted construction with fabrication on imported CNC torret punch machines, nine tank treatment process with pure polyster based powder coating to ensure long life in all weather conditions and for outdoor application/ installation integrated design thereby facilitating/ easy handing installation and shifting of the equipment at site. The design of integral acoustic enclosure should be any type approved by national physical laboratory as per Central pollution control Board (CPCB-II) latest norms/ regulation with fuel tank, battery and standard accessories and PCC foundation for (acoustic enclosure also 30cm above GL) as recommended by manufacturer vibration pad, sand cushioning around PCC foundation, tools and spares as provided by manufacturer all as specified and with the following specifications:- (A) ENGINE :- Water cooled diesel engine of suitable capacity to match the 50 KVA alternator under NTP conditions with provisions of 10% over load for 1 Hr in every 12 hours running conforming to IS 6514.The engine shall consist of following:- (i) Fly Wheel (ii) Flexible coupling with guard (iii) Cooling Fan (iv) Radiator with guard and water pump engine mounted. (v) Dynamo of suitable capacity. (vi) Air cleaner heavy duty dry. (vii) Fuel injection pump (FIP) (viii) Radiator fan (blower type with guard). (ix) Precision governer (automatic type) (x) Fuel filter. (xi) Lubricating oil filters (mounted) (xii) 24V self regulating alternator belt driven by engine. (xiii) Exhaust Silencer heavy duty residential type. (xiv) Corrosion resistor/scale inhabitor. (xv) Starter 24V DC (xvi) Lubricating oil cooler. (xvii) lubricating oil pump (gear type) (xviii) Turbo charger. (xix) Exhaust piping and asbestos rope logging. (B) INSTRUMENT PANEL: Instrument Panel consist of following:- .
(i) Auto-Manual starting switch with key. (ii) Lubricating oil temperature gauge. (iii) Lubricating oil pressure gauge. (iv) Water temperature gauge. (v) Battery charging ammeter. (vi) Battery charging indicating lamp. (vii) Hour meter with RPM indicator. (viii) Safety control against high temperature of water. (ix) Safety control against low lubricating oil pressure. (x) Over speed stop with double driven adaptor (C) BRUSHLESS ALTERNATOR:- (i) Alternator coupled to engine through a flexible coupling to an indigenous alternator mounted on strong steel fabricated base frame suitable for mounting on a permanent foundation .Brushless alternator shall be confirming to BS-2613 or relevant of IS-4722. (ii) Type- self excited self regulated with automatic voltage regulator. (iii) Rating- 50 KVA at 0.8 PF lagging 4 pole horizontal at NTP condition. (iv) Speed-1500 RPM. (D) ONE SET OF ACCESSORIES COMPRISING OF:- (a) Fuel tank one No of sheet steel and capacity to hold diesel sufficient for running 12 hours at full load including:- (i) Level indicator on fuel tank. (ii) Drain plug. (iii) MS class ‘C’ piping for fuel tank ,inlet from tank to engine. (iv) Fuel strainer. (v) Air Vent, fuel tank shall be mounted as per manufactures instructions. (b) Battery: Heavy duty battery suitable capacity matching with 50 KVA DG Set connected to the system fully charged ready for lead and battery terminals complete Make: Exide/ Amaron. (c) Base Plate: Fabricated out of MS channels ISMC of suitable size suitable for fixing DG set all as specified by the manufactures instructions. Necessary permission/ certificate from central/ state pollution control board shall be accomplished with DG set. (d) Exhaust of DG set shall be fitted with emission control devices as per latest CPCB norms all as specified and also contractor shall submit test certificate of DG set as per latest CPCB norms.
Supply, installation, commissioning & testing LT electrical outdoor distribution panel board floor mounted cubical type dust proof, weather proof and vermin proof asthetically designed having atleast IP-54 degree of ingress protection, fabricated from 3.15mm thick CRCA sheet with front and rear opening including bus bar chamber continous GI strip earth bus bar 4 strips of copper 200 amps capacity insulated colour sleeves, porcelain/ epoxy insulators, rail channels cable alloy, danger notice board including made out of 14 gauge MS sheet over angle iron frame of size 40x40x 6mm, 30 cm grouted in ground floor and 60 cm above ground level including necessary excavation, foundation, PCC etc complete with locking arrangement duly powder coated painted of approved colour connecting incoming and outgoing cable connection with suitable lugs, nuts, bolts, washers and cable joints prewired complete with PVC insulated fire retardant copper conductor cable complete. comprising of the following :- Incomimg (a) MCCB 4 pole 415 Volts 125 Amps 35 KA with adjustable thermal setting -01 No (b) Voltmeter digital type – 01 No (c) Ammeter 0-200 Amp -01 No (d) indicator LED type 22.5mm (RYB) -3 No. Outgoing (a) MCCB 4 pole 100 Amp 25 KA with adjustable thermal setting -1 Nos (b) Change over switch 125 amps 4 pole –1 No.
Supply, fabricating, installation, testing and commissioning and electrically connected LT panel outdoor type double door type canopy at top weather proof, vermin/ dust proof of suitable size cubical factory made of CRCA sheet 3.15mm thick machine pressed and angle iron frame 40mm x 40mm x 6mm in around the panel body and legs grouted in PCC (1:2:4) type B-1 using 20mm graded stone aggregate, powder coated spray painted from outside and inside with approved stove enamelled grey paints two coats over one coat of red oxide primer complete and suitable 440 Volts AC 3 phase 4 wire copper bus bar 04 Nos of each capacity 250 Amps (size 40mm x 8mm) strips fully mounted on porcelain insulator enclosed chamber with openable shutter both sides comprising with following :- INCOMING:- (a) MCCB 4 pole 415 Volts 160 Amps 35 KA with adjustable thermal setting-01 No (b) Voltmeter digital type -01 No (c) Ammeter 0-200 Amps -01 No (d) Indicator LED type 22.5 mm (RYB) -03 No OUTGOING :- (a) MCCB 4 Pole 100 Amp with adjustable thermal setting-03 No (b) Change over switch 100 Amps 4 pole -02 Nos Wiring - Wiring complete with copper conductor cable of suitable size and thimbles
Supply, fabricating, installation, testing, commissiong and electrically connected LT panel outdoor double door type canopy at top, weather proof, vermin/ dust proof of suitable size cubical type factory made of CRCA sheet 3.15mm thick machine pressed and angle iron frame 40 x 40 x 6mm in around the panel body and legs grouted in PCC (1:2:4) type B-1 using 20mm graded stone aggregate including necessary excavation & earthwork; duly powder coated spray painted from outside and inside with approved stove enameled grey paint two coats over one coat of red oxide primer complete and suitable 440 Volts AC 3 phase 4 wire copper bus bar 04 No. of each capacity 200 amps (size 20mm x 5mm) strips fully mounted on porcelain insulator enclosed chamber with open able shutter both sides comprising with following:- Incoming:- (a) MCCB 4 pole 415 Volts 100 amps 35 KA with adjustable thermal setting -01 No (b) Voltmeter digital type -01 No (c) Ammeter 0-200 amp -01 No (d) Indicator LED type 22.5mm (RYB)- 1 set. Outgoing:- (a) MCCB 4 pole 63 Amp 25 KA with adjustable thermal setting -04 Nos. Wiring:- Wiring complete with copper conductor cable of suitable size and thimbles -01 Job
LT FEEDER PILLAR BOX
LT feeder pillar box outdoor cubical type factory made of CRCA mild steel canopy at top weather proof, vermin/ dust proof sheet 3.15mm thick machine pressed and mounting on angle iron frame 40 x 40 x 6mm and four legs grouted in PCC (1:2:4) type B-1 using 20mm graded stone aggregate including necessary excavation & earthwork; duly powder coated spray paint outside and inside with approved stove enamelled grey paint over one coat of red oxide primer complete and suitable for 440 volts AC 3 phase and bus bar of capacity 125 Amp mounted on porcelain insulator open able door front and back sides with locking arrangement comprising of following:- Incoming :- (a) MCCB 4 pole 415 Volts 63 amps 35 KA with adjustable thermal setting -01 No (b) Voltmeter digital type -01 No (c) Ammeter 0-200 amp -01 No (d) Indicator LED type 22.5mm (RYB)- 1 Set. Outgoing : (a) MCB TPN 40 Amp -04 Nos. (b) MCB SPN 32 Amp -01 No Wiring :- Wiring complete with copper conductor cable of suitable size and thimbles -01 Job
M&L energy conservation T5 roadway lighting luminaires munshell grey shade fines housing with clear acrylic bowl and accessories luminaire type BTSLF 424 MS of M/s Bajaj or equivalent in Phillips/ Wipro including OEM T5 lamp 4 x 24 watt and of GI bracket made out of GI light grade pipe 32mm dia 1.5 metre long with two Nos clamp of MS flat iron 40mm x 6mm with pole including copper cable 1.5sqmm single core from street light junction box to security light connection including stove enameled black rigid steel conduit of external dia 20mm fixed on pole with clamps for protection of connecting cables from junction box to bracket of security light (Clamps shall be measured and paid for separately) complete all as specified.
Matarial and labour for pillar platform of size 90cm x 90cm and height 5 mtr including excavation & earth work in any type of soil, PCC (1:5:10) type E-2 in foundation, brick work built in cement mortar (1:6) using sub class ‘B’ old size bricks 20cm thick in cement mortar (1:6) 10mm thick plastering in cement mortar (1:4), PCC (1:2:4) type B-1 using 20mm aggregate for slab supported on walls including mild steel TMT bars 10mm dia and over cut to length bent to shape including, cranking, bending spirally for hoping for columns and binding with and including mild steel wire annealed not less than 0.9mm dia including shelter of height 0.75m with angle 50 x 50 x 4mm, 4 Nos including top frame and fibre glass reinforced corrugated translucent sheet 2mm thick fixed with 'J' hooks dia complete all as specified.
Supply and fixing of aviation/ obstruction light fitting LED 12W, 240V 50Hz with light dependent sensor including, fitted on GI pipe of 40mm bore and 1.0 mtr height grouted on roof on OHT complete all as specified and directed.
Boring of holes under main road pavement, hard standing by trenchless technology using ultra sound technique and necessary machine to accommodate 100mm bore GI tube (light grade) in the drilled holes, returning filling in the end working space including removal of surplus spoil and making good the surface complete all as specified.
S & F junction box for street light pole with 5 Nos SP terminal made of polystyrene thermoplastic IP-65 weather proof, rust proof, water proof and shock proof internally embedded ethyl ,vinyl gasket with provisions for cable entry through IP-65 thermo plastic cable glands separate for incoming and outgoing cable and wire including MCB SP 6 Amps-01 No fixed on pole with and including MS clamps made out of 25 x 3mm MS flat iron, nuts, bolts etc. complete all as specified.
S&F DOL starter 415 Volts 50 HZ, 3 phase suitable for motor capacity upto 5 HP complete all as specified.
RAIN WATER HARVESTING WORKS
Trial bore in normal available strata (size 150mm and above) upto 50m depth complete all as specified.
M&L PVC (SWR) pipe 150mm bore single socketed in any length with rubber ring joints laid in trenches or in floors complete all as specified.
M&L perforated/ slotted PVC pipe 150mm bore including necessary fitting set complete all as specified.
M&L gravel packing including jute as filter media 4mm to 6mm size around the MS pipe complete all as specified.
M&L gravel filling in trenches of size 6mm to 10mm upto height of 0.5m complete all as specified and as directed.
All as per Srl item No 7.04 above but of size 2 to 4mm upto height of 1 metre.
EOT CRANE WORKS
EOT crane 5 ton capacity flame proof and spark proof including double gantry girder ISMB 450mm and 50mm square bar rail duly spot welded on gantry girder and proposed cross travel girder (ISMB) as directed by the manufacturer and supply, testing and installing flame proof three phase induction motors of capacity not less than 7.5 HP for hoisting up/ down motion with hook lift 5.25m with hoisting speed equal to 4 m/ minute and 1 HP each for longitudinal and cross travel motion with traveling speed equal to 10 metre/minute including flame proof transmission shaft system control pendent, gear boxes break system, hoisting system and electrical control panel with limit switches and micro hoisting arrangement for finer adjustment of load with 1/10 of normal speed complete in all respect with flame proof VVVF driven system complete all as specified including working platform and comprising of the following:- (a) PVC insulated cable flexible fire proof conductor multistranded 4 sqmm 6 core 1100 Volts grade heavy duty passing through steel ring hanging on 4mm dia GI wire and GI wire fixed on channel of 75mm x 40mm at end point for supporting for span of 18 metre (b) Maintenance platform, ladder and PVC flexible FRLS cable for the CT/ LT motion and pendent of the crane as specified. Note:- (i) Any other item left out in above description but recommended by the manufacturer of the crane shall be deemed to be included in the item rate. (ii) Cost of ISMB- 450 is deemed to be included in unit rate quoted by the contractor against Srl item No 1 of Sch 'A' Part-I (iii) Irrespective of whatever shown on Drg or not ISMC-300 shall be welded on top of ISMB-450 and cost of ISMC -300 is deemed to be included in unit rate quoted by the contractor against Srl item No 1 of Schedule 'A' Part-I (iv) It will be the responsibility of contractor to take exact measurement of span required at site before procurement action irrespective of what is shown in Drgs and will get approval from GE.
Gurjit const co
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid