A/R M/O on Link road village Jubbar km 0/0 to 4/500 (Under SCSP)

Amount

Providing and applying primer coat with bitumen emulsion ( SS-1) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70-1.0 Kg/sqm using mechanical means as per Technical Specification Clause 502.

Providing ,Laying, Spreading and Compacting graded stone aggregate to Wet Mix Macadam specification including premixing the material with water at OMC in mechanical mixer (Pug mill) carriage of mixed material by tipper to site, laying in uniform layers in sub-base/base course on a well prepared sub-base and compacting with smooth wheel roller of 80-100 kN weight to achieve the desired density including lighting barricading and maintenance of diversion etc as per tabl 400.11 & 400.12 and technical specification clause 406. including carriage of material through all modes of transportation within all leads and lifts and other incidentals.

Providing and applying tack coat with Bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.25 to 0.30 kg per sqm on the prepared and hungry bituminous cleaned with Hydraulic broom as per Technical Specification Clause 503.

Providing, laying Bituminous Concrete with 100-120 TPH batch type hot mix plant providing of 75 tonne per hours using crushed aggregate of specified grading premixed with bituminous binder @ 5.4 to 5.6 percent of mixer and fillers, transporting the hot mix to work site laying with hydrostatic paver finisher with cencer control to the required grade , level and alignment, rolling with smooth wheeler, vibrating and fonder roller to achieve the desired compection as per MORTH specification clause-509 complete in all respect ( 25 mm. thick)

rehana

VIRENDER SHARMA