REPAIRS TO JOINERY FLOORING TILING AND PLASTERING AND CONNECTED B R ITEMS FOR MD ACCN UNDER GE WELLINGTON

Amount

Taking down chowkat or frame with shutter (without taking off shutters from the frame) area not exceeding 1.5 Sq mtr each and removing from site complete all as specified and directed.

Factory made solid panel PVC door shutter 30mm (Stile) consisting of frame made out of M.S tubes for top and bottom rails M.S frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail, panelling of plain colour PVC sheets to be fitted in the M.S frame welded/sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement, supplying and fixing in the frame all as specified and directed.

Solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube, supplying and fixing in opening as per specification and drawing all as specified and directed.

Factory made solid panel PVC Moulded Door shutters 28 to 30mm thick (stile) but 2mm thick 3D wood grains moulded PVC sheet polyurethene painted on front face and 2mm prelam PVC sheet on front and back face with 2, 4 or 6 raised panel design with 2mm thick moulded PVC sheet on the front face, supplying and fixing in frame at site as per specification and drawing.

Solid PVC door frame of size 50mmx47mm made out of 5mm wood grain printed PVC sheet and edges will be painted to match with printed sheet, reinforced with M.S square tube supply and fixing in opening as per specification and drawing.

Aluminium anodised, barrel tower bolts of extruded section 150 mm long all as specified and directed.

Butt hinges, 100 mm long medium weight, cold rolled mild steel, and fixed complete all as specified and directed.

Aluminium handles, cast type anodised, extruded section 150 mm long all as specified and directed.

Taking down chowkat or frame with shutter (without taking of shutters from the frames) area not exceeding 1.5 Sq mtr but not exceeding 4 Sq mtr each including cutting holes for taking out hold fasts, dismantling brickwork (holes cut and any other damages to jambs, walls for taking out hold fast shall be finished identical to existing finish without any extra cost) complete all as specified and directed.

Taking down Shutters of any description exceeding. 1 sqm and not exceeding 2 sqm all as specified and directed.

Taking down Shutter not exceeding1 sqm each all as specified and directed.

2nd class hard wood (sal / Hollock) wood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid rounded or chamfered put together with glue, pinned at joint all as specified and as directed.

35mm thick second class HW plain, framed, panelled shutters (any No of panels) with panels of timber flat on both sides (feather edged) or of veneered particle board medium density, wood particle board with commercial face veneers supplied and fitted to chowkats all as specified and directed.

35mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides all as specified and directed.

35mm thick second class hardwood skeleton door shutters open rebated and prepared to receive glass, gauze etc, edges of framing plain, chamfered or rounded with cut and mitred beads for securing glass/gauges etc with sash bars, size of members of shutter as specified in SSR Part-I section 8, clause 8.24 (a) complete all as specified and directed.

30mm thick glazed and skeleton, shutter, open rebated and prepared to receive glass, gauze etc but divided into squares with plain chamfered or rounded, mitred and rebated sah bars, any numbers the size of member of shutter as specified in SSR Pt-I section 8 clause 8.24 (a) supplied and fitted to chowkats using second class hard wood all as specified and as directed.

Mild steel work as in hold fast ec confirming to FE-290 Gde E 165 complete all as specified and as directed.

Tarring back of chowkat, area tarred exceeding 0.10 sqm but not exceeding 0.5 sqm each all as specified and as directed.

All as per item No.18 hereinbefore but treating small articles such as hold fast etc tarred area not exceeding 0.10 sqm each all as specified and as directed.

PCC 1:2:4 type B-1 using 20mm graded stone aggregate as in anchoring hold fast, parapets, copings, apex plates, bed plates and the like including weathering slightly rounded or chamfered angles and throuating all as specified and directed.

Preparation of new wooden surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer all as specified and as directed.

Preparation of old painted wooden surfaces of any description over 10 cm width or girth and applying two coat of synthetic enamel paint all as specified and directed.

Butt hinges, 100 mm size medium weight, cold rolled mild steel, and fixed complete all as specified and directed.

300 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.

200 mm long Aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed.

100 mm long Aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed.

Aluminium handles, cast type anodised, extruded section 100 mm long all as specified and directed.

Aluminium handles, cast type anodised, extruded section 100 mm long including fixed in repairs all as specified and directed.

Aluminium handles, cast type anodised, extruded section 150 mm long including fixed in repairs all as specified and directed.

Door spring ordinary rat tail rod pattern springs including roller and roller plate complete of mild steel 300mm long complete all as specified and directed.

Floor door stopper of aluminium alloy body 150mm and tongue, anodised with hard drawn steel spring fixed in floor all as specified and directed.

Galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanised wire staple all as specified and directed.

Galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanised wire staple and fixed in repairs all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from metal frames including punching or drilling out old glazing pins/ spring clips and providing and fixing new ones all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stones, concrete or brick surrounds, glazed with putty or fixed with beads sheet glass 3mm thick ordinary quality and glazing with oil putty and beads in square not exceeding 0.5 sqm in each pane all as specified and as directed

4 mm thick sheet glass ordinary quality and glazing with oil putty in squares not exceeding 0.5 sqm in each pane all as specified and directed.

4 mm thick sheet glass ordinary quality and glazing with oil putty in squares not exceeding 0.5 sqm in each pane for 2nd and 3rd floor complete all as specified and directed.

Resecuring or easying and adjusting without taking down shutter of any description not exceeding 1 sqm each all as specified and directed.

Resecuring or easying and adjusting without taking down shutter of any description exceeding 1 sqm and not exceeding 2 sqm each all as specified and directed.

Resecuring or easying and adjusting without taking down shutter of any description exceeding 2 sqm each all as specified and directed.

Butt hinges, 100 mm size medium weight, cold rolled mild steel for wooden / steel chawkhat and door etc fixed in repairs complete all as specified and directed.

Butt hinges, 75 mm size medium weight, cold rolled mild steel for wooden / steel chawkhat and door etc fixed in repairs complete all as specified and directed.

100 mm long Aluminium anodised, barrel tower bolts of extruded section and fixed in repairs complete all as specified and directed.

Supply and Fix UPVC ventilator frame shall be made of PVC material confirming to IS-10151 the ventilator frame of extruded UPVC section having overall dimensions of 100mmx62mmx50mm having wall thickness 2mm+- 0.2mm. Corners of wall frame shall be joined by MS galvanised brackets joints mitred and plastic welded. The hinge side vertical outer frame shall be reinforced with galvanised MS tube of wall thickness 1mm +/- 0.1mm and the tie rod shall be provide at the bottom of the frame all as specified and directed. Glazing (1) : The ventilator system should be glazed with 5.5mm thick glass of size as required in ventilatior frame (louvered type) as per manufacturer instructions including all fittings and necessary locking arrangements complete all as specified and directed.

Dismantling boarding/ ceiling board of any description fixed in any position with nails complete all as specified and directed.

Kitchen and Cupboard Shutter in Required sizes made out of Action Tesa HDHMR Board 18 mm thick one side decorative Lamination & other side Balancing Lamination . The 18 mm thick board shutter finished at all level including all fixing hardwares and solvent as per the Manufacturers Instructions complete all as specified and directed. Note:- Work to be carried out by manufacturers authorised workers.

Cabinet Carcase of Required sizes made out of Action Tesa HDHMR Board 18 mm thick one side decorative Lamination & other side Balancing Lamination. The 18 mm thick board at all 4 sides and 8 mm thick board as backing of Cabinet finished at all level including all fixing hardwares and solvent as per the Manufacturers Instructions complete all as specified and directed. Note:- Work to be carried out by manufacturers authorised workers.

Shelf / Partition of Required sizes made out of Action Tesa HDHMR Board 18 mm thick one side decorative Lamination & other side Balancing Lamination consisting of panel 18 mm thick board for supporting the hold of Shelf / Partition finished at all level including all fixing hardwares and solvent as per the Manufacturers Instructions complete all as specified and directed. Note:- Work to be carried out by manufacturers authorised workers.

Stainless Steel Auto closing Hinges fixed to Cabinet Shutters complete as per Manufacturers specifications and all as specified and directed. Make : EBCO or Equivalent

100mm Stainless Steel handles rectangular shape polished bright complete all as specified and directed. Make : EBCO or Equivalent

Telescopic Channel in required length including all fixing accessories/ hardwares all as specified and directed. Make : EBCO or Equivalent

18/19mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination, and other side balancing white lamination fixed with screws to timber frame work all as specified and directed.

2nd class hard wood of sectional area exceeding 6 sqcm but not exceeding 13 sqcm for plain fillets, square, rectangular or triangular in section, clean sawn, secured with nails or brads complete all as specified and directed.

Extra over rates of block board or veneered particle board for external teak wood lipping, 6mm thick fixed with nail complete all as specified and as directed.

Continuous (piano) hinges, mild steel, bright finish or electrogalvanised width of flaps (when open) 40mm complete all as specified and directed.

100mm brass handles, cast type, polished bright complete all as specified and directed.

Ball catches with 8mm dia steel ball and brass body and striking plate including letting in and fixed all as specified and directed.

Butt hinges, 40 mm of size cast brass with mild steel hinge pin, bright polished type B-11all as specified and directed.

Latches of 75 mm size rim latches with two lever of brass body.stove enamelled finish, with brass knob or lever handle all as specified and directed.

Fancy type decorative drapray rod 20 mm dia including side caps and brackets, as in repairs complete all as specified and directed.

Taking down unserviceable hinges from steel windows and fixing new box type hinges by welding, making easy opening and closing including painting and refixing window in same opening and making good to existing surface all as specified and directed.

Steel window handles left/ right with nuts and bolts or with screws including welding/ fixing with nuts, including taking existing one complete all as specified and directed.

Double action floor spring hydraulically regulated made up of minium 1.25mm thick alluminium alloy sheet foundation box, main body with stainless steel cover governing pivot made of brass other pars made up of mild steel heavy duty and fixed all as specified and directed.

Door closer hydraulically regulated, aluminium extruded section body designation No.1 universal type sutable for door shutters up to 700mm in width and of weight not more than 35Kg and fixed all as specified and directed.

Dismantling of wall ceiling boards (fibre, pulp, insulation, etc) or insulation boards/ slabs/ blankets, any thickness, including cover fillets all as specified and directed.

GI frame work for frame size 605mm x 605mm seamless ceiling comprising of GI perimeter channel 0.55mm thick with two unequal flages of 20mm and 30mm and web of 27mm fixed surrounding walls using Nylon sleeves and screws at 450mm c/c intermediate channel 0.9mm thick having two equal flages of 15mm each and web of 45mm suspended from soft at approx 900mm c/c with GI cleat and section not exceeding 1.2mtr length of 0.55mm thickness having kurb web of 50mm of and flanges of 26mm each with lips of 10.5mm fixed to intermediate channel with connection clips across the intermediate channel at 457mm c/c complete all as specified and directed.

12 mm thick Gypsum Board in ceiling fixed with screws as per manufacturers instructions all as specified and as directed.

Applying two coats of distemper oil emulsion on ceilings over priming surfaces over one coat in two layers of putty including preparation of surfaces complete all as specified and as directed.

PVC insulation pannels with EPS stuck to 1mm printed PVC sheet suitably placed in false ceiling grid made of aluminium / G.I / M/S as per specification and drawing all as specified and as directed.

Demolition of Concrete in ground floors and pavings not exceeding 15 cm thickness (below or above ground level) all as specified and directed.

Cement concrete type B-0, 1:2:4 using 12.5mm graded stone aggregate, 25mm thick PCC floor all as specified and directed.

Coloured Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including screed bed or bedding layer of mortar 15 mm thick in cement mortar 1:4 for laying floor finishes complete all as specified and as directed.

Coloured Non skid ceramic tiles 7 to 8mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including screed bed or bedding layer of mortar 15 mm thick in cement mortar 1:4 for laying floor finishes complete all as specified and as directed.

Coloured joint free non - skid Ceramic tiles 7 to 8 mm thick (Square / Rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including screed bed or bedding layer of mortar 15 mm thick in cement mortar 1:4 for laying floor finishes complete all as specified and as directed.

Vitrified ceramic tiles 10mm thick (Square/reactangular) polished area of each tile not exceeding 0.36 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement slurry to match including screed bed or bedding layer of mortar 15 mm thick for cement mortar 1:4 for laying floor finishes all as specified and as directed.

All as item No.76 hereinbefore but on vertical surfaces over a back coat of 10mm thick in cement mortar 1:3 all as specified and directed.

Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc all as specified and directed.

18 to 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars window cills, cooking platforms and like in cement mortar 1:4 including pointing in white cement 1:2 using marble dust with admixture of pigmet to match with shade of granite all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises all as specified and directed.

Glazed ceramic Coloured tiles in vertical surface 450x350x7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over 10 mm thick rendering in Cement mortar 1:3 complete all as specified and directed.

Taking down steel tubing and connections including cleaning for refixing or removal from site for 15mm bore pipe all as specified and directed.

15mm bore steel tubes medium grade galvanized with all fittings and fixed complete to walls and ceilings or laid in floors of any length all as specified and directed.

75mm thick plain Cement concrete , 1:3:6, type C-1 using 40 mm graded stone aggregate as in plinth protection / path all as specified and directed.

PCC 1:3:6 type C-2 using 40mm graded stone aggregate in surface channels and drains including necessary formwork complete all as specified and directed

Forming fair finished drain or channel of 30cm inner girth in cement concrete using extra cement including forms moulds, mitred / stopped ends etc all as specified and directed

Chequered cement concrete tiles 30cm x 30cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors complete all as specified and directed.

Screed bed or bedding layer of mortar 15 mm thick in cement mortar 1:4 for laying floor finishes all as specified and directed.

75mm thick PCC (1:4:8) type D2 using 40mm graded stone aggregate as in sub base of flooring all as specified and directed.

Cutting and cleaning of vegetation, grass, weed and roots of trees from the wall and vertical portion and removing the same to a distance not exceeding 50 m all as specified and directed.

Removal of bushes, shurbs and vegetation by surface dressing not exceeding 15 cm deep in any type of soil all as specified and directed.

Taking down cement or cement lime plaster, any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc ,complete all as specified and as directed.

15 mm thick rendering in cement mortar 1:6 on fair faces of stone masonary surface or concrete surfaces, finished even and smooth without using extra cement including scaffolding as required complete all as specified and as directed.

15 mm thick rendering in CM 1:4 on fair faces of stone masonary surface or concrete surfaces, using water proofing compound (WPC measured seperately) finished even and smooth without using extra cement including scaffolding as required complete all as specified and directed.

Supply only integral liquid water proofing compound conforming to IS all as specified and as directed.

Applying two coats of cement base paint over a coat of primer on newly plastered surfaces of wall including preparation of surfaces all as specified and directed.

Applying two coats of cement base paint over a coat of primer on old plastered surfaces of wall including preparation of surfaces all as specified and directed.

Preparation of new surfaces of wall and applying two coats of distemper oil emulsion over a coat of primer complete all as specified and directed.

Complete removal of existing treatment of wall and applying two coats of distemper oil emulsion over a coat of primer complete all as specified and directed.

Stainless steel plate track of size 0.9 X 1.2 m complete all as specified and as directed. Make : Prayag or Equivalent

Demolition of Brickwork, stone / boulder masonry built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.

Precast cement concrete 1:2:4 type B1 (20 mm graded aggregate) solid block masonary, 10 cm in thick and setting in cement mortar 1:6, complete all as specified and as directed.

Pre-cast cement concrete block masnory with solid block exceeding 10cm in width and setting in mortar 1:6 type B1, 1:2:4 using 20mm graded stone aggregate complete all as specified and directed.

Brick work with sub class 'B' bricks, old size, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 all as specified and directed.

Existing steel rolling shutters , ball bearing, spring including Top Cover, anchoring rod, hasp and staple, erected in position as indicated complete push pull or manual type and rewelding , rops, stoppers, Oiling , greasing , easying etc including necessary replacement of profile, if required grid channel complete including fixed in repairs all as specified and as directed

sree devi construction

KRA Engineering and Construction

UNIQUE INDIA CONSTRUCTIONS