Construction of 11 KV Line and sub Station against package no. 315 and 314/24-25 against Deposit Scheme under jurisdiction of EDD, Dubagga, Lesa, Lucknow

Amount

Safe Loading, Carriage & unloading of following Materials from Centre Store to Pit Site/J.E. Dump Store.

11 KV CT PT unit

11 KV Metering cubical

11 KV TVM

ST Pole 11 Mtr. Long

Top channel

Dropper Channel

MS channel 100x50x5 mm

11 KV Pin Insulator

11 KV X-arm

ACSR Weasel Conductor

Stay Set Complete

Stay Wire

Earthing Complete

GI Wire 10 SWG

3 Phase DO Fuse Set

Dragging of ST/PCC Pole digging of pit erection of sub-station type double pole structure on ST/PCC Pole with fixing of necessary item such as Top Channel, along with grouting (As per RESPO Norms) Dropper Channel, 11 pin insulator with Pin & 11 KV Disc Insulator with fitting, DO Fuse set its ramming, as per RESPO Specification. Only centralized material will be Provided by the Department.

Dragging of ST Pole to pit site, digging of pit erection and grouting (As per RESPO Norms) of 11 KV ST Pole with, fixing of necessary item, such as V-type X-arm, F-bracket, 11 KV Pin insulator with Nut & bolts its ramming as per RESSPO Specification. Only centralized material will be Provided by the Department.

Grouting & Nuzzling of 11 KV stay set complete including fixing of necessary clamps. Accessories required including its grouting by civil material (Sand, Brick blast & cement). All material except stay wire shall be supplied by the contractor.

Ordinary earthing by 11 KV MS earth Rod 2500mm long as per RESPO Schedule. All material except earthing wire shall be supplied by the contractor.

Laying Stringing & sagging of 3 Phase 3 wire 11 KV New Line on ACSR Wesel conductor as per RESPO Specification and direction on E/I. All material except ACSR weasel conductor shall be supplied by the contractor.

Guarding of HT line by GI wire. Only GI wire shall be supplied by the department.

Well type earthing of with 60 Fit Deep boring and providing GI Pipe 1.5" dia ("B" Class) and earthing must be joint by G.I. Strip of 32x5 mm thick long attached with nut & bolts and GI pipe cap. All material and labour shall be supplied the contractor.

Construction of T/F plinth of size 2x2x1.2 mtr with the help first class brick & masonry in the ratio 1:4 cement & sand coarse. Filling the structure completely per norms with RCC to 1:2:2 cement & stone grit with MS bar and MS channel for resting transformer.

Wiremess fencing of 11/0.4 KV S/S shall be made of rectangular of size as per site requirement not exceeding 3 meter fabrication 45x45x5 mm angel the frame is also have 1 no. Horizontal runner of MS flat 40x5 welded in middle to support of wire mesh. Rectangular welded type wire mess of size 50x25 made of 12 S.W.G. wire mess shall be welded all along the periphery of the frame as well as on horizontal runner to give extra strength of welding to wire mess welded on the frame. Diagonal bracing of all the frame panel will be welded with Ms flat of size 25x3mm to support as per RESPO specification & direction of E/I.

Construction of masonry/metallic type distribution pillar of size 1x1.5x2.5 mtr. with supply & fixing of fabricated 4 nos. doors (2ft.x4ft.) made of BP sheet of 18 SWG with locking arrangement, 2 Nos. Straight MS angle 50x50x6mm (1800 mm long) 2 nos. 500 Amp, 3 Nos. 300 Amp Henley Type Tailless Fuse Unit, 3 Nos copper bus bar of size 1000x50x6 mm and one No. Alum busbar 1000x50x6 mm including all civil material required for work. All material shall be supplied by contractor.

Fixing of 11 KV CT PT & meter on existing Double Pole for double metering purpose. The work including mounting of PT on sub station bench made of MS Angle of size 50x50x6 mm 2240 mm 2 Nos and fixing of dropper channel with nos pin & pin insulator with its HT connections by single core 70 sqmm LT cable with existing 11 KV Line and connecting PT with meter by the help of GI Pipe 1.5" dia and MS Angle 50x50x6 mm including PVC cable 3/20 sqmm. Only CT PT & meter shall be supplied by the deptt.

Fixing of Pilfer Resistance Meter (25/5 Amp). All material except Pilfer Resistance Metering Cubical shall be supplied by the contractor.

Fabrication, errection & commissioning of 400 KVA T/F on Plinth with all accessories. All material except 400 KVA T/F shall be supplied by the Contractor.

Installation of 11 KV TVM METER along with Providing and fixing of Ms flat 50x6 (2080mm) 2 no with clamp nuts and bolts.

GST Extra as per Rules

GOPI ENTERPRISES

SANA ELECTRICALS