Renovation of class III flats

1. Carefully dismantling and removing of existing mosaic flooring/ Kota stone / ceramic tile or any other flooring / skirting, sunken fillings such as cinder filling / brick bat coba / dado, etc. from kitchen, bathroom, toilet or wherever required including disposing off debris out of Bank's premises at approved dumping ground of local administration, including all lead and lift etc. all complete as directed by Bank’s Engineer. Note:- This item will be operated in kitchen, bathrooms, wash basin area and toilets. a) Carefully dismantling of toilet, wash basin area and bathroom (approximate area = 4.6 Sqm.) b) Carefully dismantling all plumbing & sanitary fittings. Sink with brackets, looking mirror, geyser, water purifier, G.I. pipe line, existing flushing cistern including flush pipe, brackets, W.C. seat, wash basin with brackets, C.P./ Brass fittings, etc. from one flat. c) Dismantling of skirting : Carefully dismantling all the existing tile/stone skirting with backing mortar in the flat and balcony. d) Dismantling of kitchen (approximate area = 6.8 Sqm.) : Carefully dismantling the existing kitchen platform along with all attached masonry work. Work includes disposal of debris out of Bank premises, considering the salvage value of dismantaled material, making good the damages with cement mortar 1:4 (1 cement : 4 sand) or plain cement concrete 1:2:4 (1 cement : 2 sand : 4 stone chips 20 mm. nominal sie) as directed by Bank's Engineer.

2. Providing and constructing half brick wall in cement mortar 1:4 ( 1 Cement : 4 coarse sand) at all levels, using best quality locally available bricks including providing key with adjoining stone/brick masonry wall, as per site requirement including racking out joints, curing etc., all complete as directed by Bank's Engineer.

3. Providing and applying plain cement plaster in 15mm thick in cement mortar 1:4 (1 cement: 4 coarse sand) or level to be match with surrounding area including scaffolding, curing, etc. all complete as directed by Bank’s Engineer.

4. Providing and applying polymer based two compound water proofing treatment to the sunken portion of the toilets, etc. by using products of M/s. Pidilite, M/s. Fosroc, M/s. Sika, M/s. BASF or any other equivalent in the following steps:- a) Thoroughly cleaning of all surfaces of sunken portions to be treated. b) Grouting and injecting polymer cement slurry as per manufacturer’s specifications into the R.C.C. members till its refusal. c) Repairing the damaged portions of the R.C.C. members with polymer concrete / mortar as per manufacturer’s specifications. d) Providing and applying 20 mm. thick water proofing cement plaster 1:4 (I cement: 4 coarse sand) mixed with water proofing compound as per manufacturer’s specifications to the sunken floor and sides including rounding off junctions / corners with water proofing cement mortar, etc. all complete. e) Providing and applying a coat of polymer water proofing primer and two coats of two compound based water proofing polymer/ chemical of M/s. Pidilite, M/s. Fosroc, M/s. Sika, M/s. BASF or any other equivalent approved make as per manufacturer’s specifications to the sunken floor, sides, etc.; testing the treated surface by ponding method for 72 hours. f) Repeat the treatment till no seepage is observed on the treated surface. g) Providing and laying 15 mm. thick protective layer of plain cement plaster in cement mortar 1:4 (1 cement : 4 coarse sand) over the treated surface. Work also includes making through hole across the stone masonry wall of 200 mm. to 450 mm. thick up of required size for embedding G.I. pipe of 15 mm. diameter in stone masnry for draing out the seepage leakage water, if any, and filling with cement mortar 1:2 (1 cement : 2 coarse sand) including supplying G.I. pipe of 200 mm. to 450 mm. length. Note:- Single measurement of the sunken floor and its sides shall only be considered for payment for all sub items of work.

5. Providing and laying brick bat coba to the sunken floors using best quality locally available well burnt sliced bricks in cement mortar 1 : 4 ( I cement : 4 coarse sand ) mixed with water proofing compound of approved make as per manufacturer's specifications, roughening the top layer of cement mortar / top surface of sunk filling with broom to receive the flooring, etc. all complete as directed by Bank's Engineer. Note:- No deduction for squatting / w.c.pan, C.I. pipes, etc. will be made for measurement purpose.

6. Providing and laying R.C.C. 1:1 ½ :3 (1 cement : 1½ coarse sand : 3 aggregate) for lintel, shelves, platform, slab etc. excluding reinforcements but including compaction, centering, shuttering, curing, finishing, cutting pockets in walls/slab to provide necessary bearing at all height and level, etc. complete all as directed by Bank`s Engineer.

7. Supplying, straightening, cutting, bending, placing in position and binding & tieing with binding wire TMT steel bar grade Fe415 of approved manufacturer in required diameter including cost of 16 SWG binding wire etc. complete all as directed by the Bank`s Engineer.

8. Providing, fixing, jointing and testing first quality floor mounted white vitreous chinaware European W. C. pan, and P.V.C. Low level flushing cistern with dual system of Hindware, Parryware, Jaquar or any other equivalent approved make including jointing properly with hessian soaked in cement slurry and applying a thick layer approved quality sealant to the joints, providing and fixing approved heavy quality white P.V.C. seat cover of the same make, etc. The rate shall include for fixing arrangement, P.V.C. flush pipe, P.V.C. connection, all complete with all labour, material, T&P, etc. all complete as directed by Bank’s Engineer. Note:-The basic price of E.W.C. Pan including P.V.C. seat cover, and P.V.C. Low level flushing cistern with dual system is Rs. 4,000/- each including GST.

9. Providing & fixing first quality white vitreous chinaware wash basin with padestal of Parryware, Hindware, Jaquar or any other equivalent approved make; including making hole for pillar cock, providing and fixing 32 mm. diameter C. P. brass half thread waste coupling of approved make, P.V.C. connection and 32 mm. diameter heavy approved quality P.V.C. waste pipe, providing and fixing C.I./M.S. brackets with cement concrete, painting of brackets with a coat of metal primer and two or more coats of first quality synthetic enamel paint., etc. all complete with all labour, material, T&P, all complete as directed by Bank’s Engineer. Note:- The basic price of Wash Basin including C.P. brass waste coupling and padestal is Rs. 2,900/- each including GST.

10. Providing and fixing stainless steel kitchen sink with drain board of 1040 mm. X 510 mm. X 215 mm. sink of Nirali, Diamond or any other equivalent approved size, make and quality (preferably glossy) including strainer, coupling, heavy quality P.V.C. waste pipe of suitable length (approximately 600 mm.) etc. all complete as directed by Bank’s Engineer. Note:- Basic rate for a complete set of sink with grating and coupling is Rs. 7,000/- per unit including GST.