Supply and Laying of main incoming cable to RN Tagore Hostel and KN girls Hostel and laying of main incoming cable for DG supply in common Area of PG Girls Hostel.

Supply and Laying of main incoming cable to RN Tagore Hostel and KN girls’ Hostel and laying of main incoming cable for DG supply in common Area of PG Girls’ Hostel.

Supply and laying of aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps/ under cemented surface/ through cemented wall with boring and cutting etc. of suitable size or as directed by the Engineer Incharge, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc. 185 sq.mm 3-1/2 core

Supply and laying of aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps/ under cemented surface/ through cemented wall with boring and cutting etc. of suitable size or as directed by the Engineer Incharge, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc. 240 sq.mm 3-1/2 core

Laying of one number PVC insulated and PVC sheathed/ XLPE power cable of 1.1kV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required. Above 35 sq. mm and upto 95 sq. mm. 3-1/2 core

Supply and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed/ XLPE aluminium conductor cable of 1.1kV grade as required. 3-1/2 x 50 sq mm (35mm)

Supply and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed/ XLPE aluminium conductor cable of 1.1kV grade as required. 3-1/2 x 185 sq mm (57mm)

Supply and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed/ XLPE aluminium conductor cable of 1.1kV grade as required. 3-1/2 x 240 sq mm (62mm)

Supply and fixing of following ways surface/recess mounting, vertical type , 415V, TPN MCB distribution board of sheet steel, Dust protected, Duly powder painted, Inclusive of 200A, tinned copper bus bar, common neutral link, earth bar, din Bar, for mounting MCBs (but without MCBs and incomer) as required. (Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required.) 4 way (4+12) , Double Door

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required Single Pole

Providing and fixing following rating and breaking capacity and pole MCCB with thermo magnetic release and terminal spreaders in existing cubical panel board including drilling holes in cubical panel, making connections, etc. as required 100A,30kA, FPMCCB

Providing and fixing following rating and breaking capacity and pole MCCB with thermo magnetic release and terminal spreaders in existing cubical panel board including drilling holes in cubical panel, making connections, etc. as required 400A,50kA, FPMCCB

M/S RAJANI SINGH (BID ID -3326384)

PRAYAG ELECTRIC COMPANY (BID ID -3327320)

M/S RAJ ELECTRICALS (BID ID -3326631)