Annual stage maintenance Repairs and Other Emergent Works of Sub Division Lal Nagar

Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed: 1 meter from cutting edge: In all kinds of soils

Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed: Ordinary rock

Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres: In all kinds of soils

Ordinary rock

Earth work in bulk excavation by manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earthlead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge: In all kinds of soils

Ordinary rock

Earth work in bulk excavation by mech means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earthlead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge: In all kinds of soils

Ordinary rock

Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5 m in width as well as10 sqm on plan including disposal of excavated earth, leadupto50meterand lift upto 1.5m, as directed by Engineer-in-Charge. All kinds of soil :

Excavating, supplying and filling of local earth (including royalty)by mechanical transport upto a lead of 5 km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete.

Felling trees of the girth (measured at a height of 1 m above ground level) including cutting of trunk and branches, removing the roots and stacking of serviceable material and disposal of unserviceable material. Beyond 30 cm girth upto and including 60 cm girth.

Beyond 60 cm girth upto and including 120 cm girth.

Beyond 120 cm girth upto and including 240 cm girth.

Above 240 cm girth

Providing and mixing water proofing material in cement concrete work in doses by weight of cement as per manufacturer’s specification. (1 kg of water proofing material in 50 kg of cement)

Smooth finishing of the exposed surface of RCC work with 6mm thick cement mortar 1:3 (1 cement: 3 fine sand) including curing.

Providing and fixing wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge :

Second class Kail wood

Laying and fitting of G.I. pipes (all classes) complete excluding cost of pipes, fittings and Earth work.

100 mm and 150 mm dia GI pipes

65 mm and 80 mm dia GI pipes

40 mm and 50 mm dia GI pipes

25 mm and 32 mm dia GI pipes

15 mm and 20 mm dia GI pipes

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m.

Dismantling G.I. pipes (external work) including excavation and refilling trenches after taking out the pipes, manually/by mechanical means including stacking of pipes within 50 meters lead as per direction of Engineer-in-charge :

Above 40 mm nominal bore

15 - 40 mm nominal bore

Laying in position centrifugally cast (spun) iron S&S or flanged pipes (excluding cost of pipe)

Providing push-on-joints to Centrifugally (Spun) Cast Iron Pipes or Ductile Iron Pipes including testing of joints and including the cost of rubber gasket.

100 mm dia pipes

125 mm dia pipes

150 mm dia pipes

200 mm dia pipes

250 mm dia pipes

300 mm dia pipes

Dismantling of spindle / rod and check nuts of flanged type sluice valves by way of manufacturing of new spindle / rod made out of mild steel & new check nut made out of gun metal material. The job includes dismantling of sluice valve reassembling after fixing of spindle & check nut duly manufactures and threaded in workshop including cost of welding, packing, carriage to & fro upto the workshop and back to site of work (Complete job) from 100 mm dia sluice valve upto 400 mm dia sluice valve including cost of salvaged material.

Dismantling of spindle / rod and check nuts of flanged type sluice valves by way of manufacturing of new check nut made out of gun metal material. The job includes dismantling of sluice valve reassembling after fixing of spindle & check nut duly manufactures and threaded in workshop including cost of welding, packing, carriage to & fro upto the workshop and back to site of work (Complete job) from 80 mm dia sluice valve upto 400 mm dia sluice valve including cost of salvaged material.

Dismantling of spindle / rod and check nuts of flanged type sluice valves by way of manufacturing of new spindle / rod made out of mild steel only. The job includes dismantling of sluice valve reassembling after fixing of spindle & check nut duly manufactures and threaded in workshop including cost of welding, packing, carriage to & fro upto the workshop and back to site of work (Complete job) from 100 mm dia sluice valve upto 350 mm dia sluice valve including cost of salvaged material.

Dismantling of spindle / rod and check nuts of flanged type sluice valves by way of manufacturing of new spindle / rod made out of Gun metal only. The job includes dismantling of sluice valve reassembling after fixing of spindle & check nut duly manufactures and threaded in workshop including cost of welding, packing, carriage to & fro upto the workshop and back to site of work (Complete job) from 100 mm dia sluice valve upto 350 mm dia sluice valve including cost of salvaged material.

Decamping of main cable at Filtration Plants from LT poles, cutting of main cable by Hexa blades, providing / fixing of bone china insulators, thimbles, cost of PVC tape rolls, fuse wire, engagement of skilled/ non skilled labours, cost of rope, hire charges of long stair etc. complete job

Providing / fixing of M.S double collers/ arresting of leakages by way of welding including all sorts of carriages( 0.45 mtr to 0.75 mtr) complete job.

80 mm dia

100 mm dia

150 mm dia

200 mm dia

Providing / fixing of double collers, G.I./ M.S. for arresting of leakages by using led & spun yarn incld. earthwork excavation, refilling etc. including all sorts of carriages (length verying from 0.60 to 1 Mtr.)

40 mm dia

50 mm dia

65 mm dia

80 mm dia

100 mm dia

150 mm dia

200 mm dia

Providing and fixing including testing, commissioning & fabricating at site M.S pipe Specials Etc. & all sorts of carriages upto site of work, as per requirement at site complete job.

Providing and fixing of Electrical points (heating and lighting) incld. cost of wire switches, necessary MCB’s switch boards, ceiling roses reputed make ISI mark screws, casing / conduit materials of allsorts of carriage and labour charges required for the job.

Lighting points

Heating points

Supply/ fixing of pipe specials from open market, if not available in the Divisional stores of ISI marked standard make.

100 mm dia G.I Union

80 mm dia G.I Union

65 mm dia G.I. Union

50 mm dia G.I. Union

40 mm dia G.I. Union

25 mm dia G.I. Union

20 mm dia G.I. Union

80 mm dia G.I. Elbow

65 mm dia G.I. Elbow

50 mm dia G.I. Elbow

40 mm dia G.I. Elbow

25 mm dia G.I. Elbow

20 mm dia G.I. Elbow

80 mm dia G.I. Socket

65 mm dia G.I. Socket

50 mm dia G.I. Socket

40 mm dia G.I. Socket

25 mm dia G.I. Socket

20 mm dia G.I. Socket

80 mm dia G.I. Nipple upto 10"

65 mm dia G.I. Nipple upto 10"

50 mm dia G.I. Nipple upto 10"

40 mm dia G.I. Nipple upto 10"

25 mm dia G.I. Nipple upto 10"

20 mm dia G.I. Nipple upto 10"

15 mm dia G.I. Nipple upto 10"

25x25x20 mm dia G.I. Equal Tee

40x40x25 mm dia G.I. Equal Tee

50x50x40 mm dia G.I. Equal Tee

65x65x50 mm dia G.I. Equal Tee

80x80x65 mm dia G.I. Equal Tee

25x20 mm dia Socket/ Reducer

40x25 mm dia Socket/ Reducer

50x40 mm dia Socket/ Reducer

65x50 mm dia Socket/ Reducer

80x65 mm dia Socket/ Reducer

25x20 mm dia Elbow/ Reducer

40x25 mm dia Elbow/ Reducer

50x40 mm dia Elbow/ Reducer

65x50 mm dia Elbow/ Reducer

80x65 mm dia Elbow/ Reducer

100mm dia Elbow

100mm dia Equal Tee

100 mm dia G.I. Bend

80 mm dia G.I. Bend

65 mm dia G.I. Bend

50 mm dia G.I. Bend

40 mm dia G.I. Bend

Re-threading of damaged pipe ends including carriage from site to workshop and back.

20 mm dia

25 mm dia

40 mm dia

50 mm dia

65 mm dia

80 mm dia

100 mm dia

Overhauling voltage stabilizers installed at site. The job includes pouring / filling of transformer oil of required specified gravity, replacement of driven rotars (automatic), replacement of voltage meters, Amp meters, indicators, thimbles etc. complete job, making the unit complete functional for bearing of required load. The job also includes labour charges, cost of wiring, pin sockets and all sorts of carriages from site of work upto the workshop & back to actual site of work incld. installation at site & testing, successful commissioning complete job.

5 KV to 10 KV

11 KV to 20 KV

21 KV to 30 KV

Desilting of various structures incld. Disposal of desilted material from site premises with all carriages lead & lifts etc. The job also includes, washing and cleaning of walls, beds, drains and floor etc with bleaching powder solution complete job.

Using buckets, ropes etc. Manually

Through washout by Mix silt with water

Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing Tee, including cutting and threading the pipe etc. complete

25 to 40 mm nominal bore

50 to 80 mm nominal bore

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size)

Replacement of old damaged G.I. Gate valves/ Sluice valve by providing / fixing of new Gate valves/ Sluice valve including cost of nuts, bolts, rubber insulations of ISI marked standard make all carriages upto site of works, complete and providing of check certificate from the standard manufacturer.

100 mm dia Gate valve

80 mm dia Gate valve

65 mm dia Gate valve

50 mm dia Gate valve

40 mm dia Gate valve

25 mm dia Gate valve

20 mm dia Gate valve

300 mm dia Sluice valve

250 mm dia Sluice valve

200 mm dia Sluice valve

150 mm dia Sluice valve

100 mm dia Sluice valve

80 mm dia Sluice valve

65 mm dia Sluice valve

50 mm dia Sluice valve

Welding, including transportation of plant at site etc. complete

By gas plant

By electric plant

Carriage of material from divisional store up to dumping site of work, including loading, unloading and stacking etc. complete by Mechanical Transport below 100 mm dia.

G.I/C.I pipe avg. lead upto 05 KMs

G.I/C.I pipe avg. lead beyond 5KMs to 10KMs

G.I/C.I pipe avg. lead beyond 10KMs to 20KMs

G.I/C.I pipe avg. lead beyond 20KMs

Sand & Agg. 20 mm avg. lead up to 5KMs

Sand & Agg. 20 mm avg. lead beyond 5KMs to 10Kms

Sand & Agg. 20 mm avg. lead beyond 10KMs to 20KMs

Sand & Agg. 20 mm avg. lead beyond 20 Kms

40 mm Agg. avg. lead of upto 5KMs

40 mm Agg. avg. lead beyond 5Kms to 10KMs

40 mm Agg. avg. lead beyond 10KMs to 20KMs

40 mm Agg. avg. lead beyond 20KMs

Stone soiling avg. lead of upto 5KMs

Stone soiling avg. lead beyond 5KMs to 10 KMs

Stone soiling avg. lead beyond 10Kms to 20 Kms

Stone soiling avg. lead beyond 20Kms

Carriage of pipes from divisional store up to dumping site of work, including loading, unloading and stacking etc. complete by Mechanical Transport

100 mm dia DI/ GI pipes upto 5 KMs

100 mm dia DI/ GI pipes lead avg. beyond 5kms to 10 kms

100 mm dia DI/ GI pipes lead avg. beyond 10kms to 20 kms

100 mm dia DI/ GI pipes lead beyond 20 kms

125 mm dia DI/ GI pipes lead upto 5Km

125 mm dia DI/ GI pipes lead beyond 5kms to 10 kms

125 mm dia DI/ GI pipes beyond 10 Km to 20 kms

125 mm dia DI/ GI pipes beyond 20 kms

150 mm dia DI pipes upto 5 kms

150 mm dia DI pipes beyond 5 kms to 10 kms

150 mm dia DI pipes beyond 10 kms to 20 kms

150 mm dia DI pipes beyond 20kms

200 mm dia DI pipes upto 5 kms

200 mm dia DI pipes beyond 5 kms to 10 kms

200 mm dia DI pipes beyond 10 kms to 20 kms

200 mm dia DI pipes beyond 20kms

Carriage of material from dumping site to actual site of work, including loading, unloading and stacking etc. complete by manual labour

Cement for an avg. lead upto 50 mtr.

Cement for an every additional lead of 50 mtrs or part thereof beyond 1st 50 mtrs.

Steel for an avg. lead upto 50 Mtr

Steel for an every additional lead of 50 mtrs or part thereof beyond 1st 50 mtrs.

Pipe for an avg. lead upto 50 Mtr

Pipe for an every additional lead of 50 mtrs or part thereof beyond 1st 50 mtrs.

Soiling for an avg. lead upto 50 Mtr

Soiling for an every additional lead of 50 mtrs or part thereof beyond 1st 50 mtrs.

Sand & Agg.20mm for an avg. lead upto 50 Mtr

Sand & Agg.20mm for an every additional lead of 50 mtrs or part thereof beyond 1st 50 mtrs.

40mm Agg. for an avg. lead upto 50 Mtr

40mm Agg. for an every additional lead of 50 mtrs or part thereof beyond 1st 50 mtrs.

Carriage of Pipes from dumping site to actual site of work, including loading, unloading and stacking etc. complete by manual labour

100 mm dia DI/ GI pipes 50 m

100 mm dia DI/ GI pipes beyond 50 m or part therof beyond first 50 m

150 mm dia DI/ GI pipes 50 m

150 mm dia DI/ GI pipes beyond 50 m or part therof beyond first 50 m

200 mm dia DI pipes 50 m

200mm dia DI pipes 50m or part therof beyond first 50m

Centering and shuttering including strutting, propping etc, and removal of form for.

Foundations, footings, bases of columns etc for mass concrete.

Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc.

Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

Providing fixing & commissioning of 10/12 mm thick Flanges in pairs including welding, cutting of threaded portion, washers including cost of Flanges with Nuts and Bolts including making joint leak proof including all sorts of labours whatsoever required

250mm dia

200mm dia

150mm dia

100mm dia

80mm dia

65mm dia

50mm dia

40mm dia

Providing CI Sluice valve including cost of nuts, bolts, rubber insulations etc. of ISI marked standard make all carriages upto site of works, complete . and providing of check certificate from the standard manufacturer

250 mm dia Sluice valve

200 mm dia Sluice valve

150 mm dia Sluice valve

100 mm dia Sluice valve

Fixing charges of Sluice Valves including Testing, Commissioning and carriages from divisional store to actual site of work including dismantling of old (in case of replacement) and carriage of same to divisional store, Complete job

200 mm dia

150 mm dia

100mm dia

80mm dia

50mm dia

Engagement of JCB including haltage charges for all reasons

Supplying and Laying of polythene sheets (Black) at off take points during lean dscharge / Freezing

Opening out old wire crates those and re-binding after filling.

Filling empty cement bags with sand/ earth including cost of bags and earth / sand (Earth or sand to be locally excavated) including all sorts of carriages upto actual site of work

Pumping out water caused by springs, tidal or river seepage, broken water mains or drains and the like.

Dismantling of C.I. sluice valve including stacking of useful materials within a lead of 50 meters.

Upto 150 mm diameter.

Above 150 mm diameter.

Dismantling C.I. pipes manually/ by mechanical means breaking lead caulked joints, melting of lead and making into blocks including stacking of pipes and lead at site within 50 meter lead as per direction of Engineerin-charge

Upto 150 mm diameter.

Above 150 mm diaupto 300 mm dia.

Labour for cutting C.I. pipe with steel saw.

80 mm diameter C.I. pipe

100 mm diameter C.I. pipe

125 mm diameter C.I. pipe

150 mm diameter C.I. pipe

200 mm diameter C.I. pipe

250 mm diameter C.I. pipe

Hire charges for welding plant for necessary repairs of pipe network/structures etc as per requirement including C/O operator, Genrator, welding rods, wiring and carriage of man and machinary complete in all respects as per requirement at site but excluding additional materials like collar, pipe specials, steel section etc.

Hand-packing stones in wire-crates; excluding cost of crates and stones

Supply of wire crates including all types of carriages upto site of work.

Supply of stones including all types of carriages upto site of work.

Supplying and filling in plinth with fine sand under floors including, watering, ramming, consolidating and dressing complete.

Repairment of monoblock motors of different capacities including dismembering, rewinding, refixing, testing, commissioning and all types of carriages complete in all respects

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 meters lead.

For thickness of tiles 10 mm to 25 mm

For thickness of tiles above 25 mm and upto 40 mm.

Supply of Spun yarn

Supply of Pig Lead at site of work

P/F of PPR pipe, including all pipe fitting, carriages upto Site of work complete in all respects

Providing of PPR Gate valves/ Ball valves including all necessary accessories as per requirement at site complete

25 mm Gate valve/ Ball valve

32 mm Gate Valve/ Ball valve

40 mm Gate valve/ Ball valve

Supply of Nallah Muck including laying of same manually/ mechanically including all sorts of carriage complete

Supply of stone dust including laying of same manually including all sorts of carriages complete

Fabrication of GI bends of required angle/size, Tees, tail pices etc at site using welding job including cutting of pipes, fixing of flunges, nuts, bolts, washers etc for Washout system. The job includes carriage of man , machinary, carriage of pipe material from departmental store upto site of work complete in all respects. Cost of flanges will be paid separately

80mm dia

100mm dia

150mm dia

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position & binding all complete upto/above plinth level:Thermo-Mechanically Treated bars of grade Fe-500D or more

Fixing charges of double collars of 150/100/80/65 mm dia incl cost of earthwork , refilling , wooden pegs , spun yarn and cutting of pipe wherever required and all carriages complete.

Providing and fixing C.I. double acting air valve of approved quality with bolts, nuts, rubber insertions etc. complete (The tail pieces, tapers etc. if required will be paid separately)

50 mm dia

100mm dia

150mm dia

Providing Steel weld mesh trash guard .

Providing and fixing of Green shaded construction net to cover up pcollection chambers /water tanks/PSTs.

Engagement of men. (Labour / Coolie)

Providing/ fixing of Rubber Gaskets: 80 mm dia

100 mm dia

150 mm dia

200 mm dia

250 mm dia

Providing/ fixing of Rubber Washers: 80 mm dia

100 mm dia

150 mm dia

200 mm dia

250 mm dia

Provision for monthly recharge for JIO Fibre for Divisional/Sub Divisional office.

Providing & Fixing 6mm thick excel matting with cutting to size incl. labour, carriage charges etc. complete job

Providing & Fixing 12mm therma coal with 6 feet wide for room flooring with cutting to size incl. labour, carriage charges etc. complete job

Providing and fixing nickel plated M.S. pipe curtain rods with nickel plated brackets 20 mm dia ( heavy type)

Providing & Fixing End balls

Providing & Fixing of curtains 7 feet long

Hire charges of Vehicle with mounted Public Address System including cost of POL.

Providing of tools and tool kits inculsive of all taxes and carriages (Taparya/ Inder /TATA make or equivalent)

Dia set 1/2" to 1" dia

Dia set 1" to 2" dia

Hammer 1 kg weight with handle

Hammer 1.50 kg weight with handle

Pick Axe with handle

Tool Kit complete

Digging Iron Rod (Sabbal) 7kg

Showel with handle

Long shoes

Rain Coats

Pipe Wrench 14"

Pipe Wrench 18"

Pipe Wrench 24"

Providing of plastic buckets, Mug, Brooms, Wippers etc of good quality at various plants complete.