Spl repair to road at MES office and MES instln in area of AGE BR-II under GE West JRC

Amount

M & L for Preparing old existing black top surfaces by brushing with wire brushes for removing cacked mud etc sweeping with brooms and finally fanning the cleaned surfaces with gunny bags to remove all dirt and loose material applying evenly a tack coat with paving bitumen VG-10 @ 5kg/10 sqm of road surface, laying Semi dense bituminous premix asphaltic concrete 30mm thick consolidted thickness with 5.5% binder content of bitumen VG-30 by weight of total mix laid using mechanical paver, and rolled to a uniform smooth surface with 8 to 10 ton power road roller to required camber and gradient, complete all as specified and directed. Note:- Mix shall be prepared in Hot Mix plant as per job mix formula obtained from authorised testing lab and laying will be done by mechanical paver.

M & L for applying a tack coat of paving bitumen VG-10 @ 5Kg/10 Sqm of road surface complete all as specified and directed.

M & L Premix bituminous macadam laid, rolled and compacted to required gradient and camber (consolidated thickness 75mm or less) with paving bitumen VG-30 @ 4% by weight of total mix complete all as specified and directed.

M & L for Repair to pot holes any depth not exceeding 1 Sqm each including sweeping free from dust and mud, or water scoring sunken surfaces in road path etc cutting around edges, at least 25mm in depth and making good by applying tack coat using paving bitumen @ 5 Kg per 10 Sqm, putting in premixed bituminous macadam well rammed and sealed with binder using paving bitumen @ 9.8 Kg Per Ten Sqm blended with 0.09 cum stone chipping 6.3mm size and again well rammed (including supply of premixed macadam binder and chippings) depth of pot hole exceeding 30mm complete all as specified and directed.

Material & Labour for preparing bituminous surfaces of road and marking 2.5mm thick centre line /stop lines /dashes, arrows etc. and the like n exc 10cm width on road pavements with hot thermoplastic road marking paint of approved colour conforming to BS-3262-1989 with special applicator machine all as per manufactures instruction complete all as specified and directed.

Supply and fixing in repair solar delinators made of polycabonate & toughened Auminium alloy body of 80mm dia, height of pole one mtr comprises of 4 ultra bright flashing LEDs including 15cm x15cm x 20 cmsize block of PCC (1:2:4) type B1 using 20mm graded stone aggregate.

Supply and fixing in repair cat eye solar reflective type of metal body alloy of size 100mm x 100mm x 20mm with PAMA striplens reflector of model No. DA 972.0 fixed with and incl MS stud of suitable size as per manufactures instructions complete all as specified and directed by Engineer in Charge

S&F in repair High quality ABS Plastic Speed Bump of size 250m x 350m height 50mm Fixing on road with two highly reflective reflectors moulded in HDPE material are welded with ABS plate having high resistance capacity to withstand severe impacts.

J.K & Company (BID ID -3126706)

SANDEEP JHANJI CONSTRUCTIONS (BID ID -3109817)

M/s Sahib and Company (BID ID -3127006)