SPECIAL REPAIR / REPLACEMENT OF ALUMINIUM WIRING IN CERTAIN BUILDING AT AFS HAKIMPET UNDER GE (AF) HAKIMPET

Amount

Taking down Chowkhats or frames with shutters n exc 1.5 sq. m each complete all as specified and as directed

S&F factory made uPVC white colour Three track three panels sliding window with fly proof S.S wire mesh (Two nos glazed & one no wire mesh panels) upto 1.50m height made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead /double glazing bead of appropriate dimension. comprising of uPVC multi?chambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and directed by Engineer-in-Charge.

Note: (i ) Glass or wiremesh shall be paid separately . (ii) For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.

S&F factory made uPVC white colour Fixed glazed window/ventilator made of frame 47 x 50 mm mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge.

Note: (i) Glass shall be paid separately. (ii) For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.

S&F stainless steel wire cloth, 0.36 mm nominal dia of wire and average with of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and as directed by the Engineer-in-Charge.

S&F 4 mm thick sheet glass, ordinary quality and glazing with oil putty in Square n exc 0.5 sqm in each pane complete all as specified and directed

S&F 4 mm thick Figured glass, pin head type and glazing with oil putty in Square n exc 0.5 sqm in each pane complete all as specified and directed

S&F MS Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 all as directed and specified by Engr-in-Charge.

M&L for Preparing new steel and iron surfaces of any description over 10 cm widthor girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and as directed by the Engineer-in-Charge.

Taking down plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. in cement lime or cement mortar including removal of spoil/ demolished material out of the premises of the site complete all as specified and directed.

M&L Rendering 10 mm thick in CM 1:3 on celling surface, finished even and smooth with out using extra cement up to ht 6.5 m all as specified and directed.

M&L Rendering 15 mm thick in CM 1:6 on brick massonry surfaces of walls, finished even and smooth with out using extra cement all as specified and directed.

M&L Complete removal of existing treatment on walls complete all as directed.

M&L Complete removal of existing treatment on ceiling complete all as directed.

M&L 3mm thick wall putty with white or tinted on walls complete all as directed.

M&L for 2 coats of Oil bound distempering over a coat of primer on walls complete all as specified and as directed.

M&L 3 coats of white wash over a coat of primer on ceilings complete all as specified and as directed.

Taking down carefully existing unserviceable aluminum/copper point wiring (light, fan, socket or power) of any description & in any position complete including all fittings & fixtures such as switches, ceiling roses, pendants, regulators, socket, light fittings, lamp holders etc including taking out and removing serviceable fittings/fixtures and making good the disturbed surface of walls, floors, ceiling etc. to match with the existing surfaces complete all as specified and directed

M&L for point wiring with 1.5 Sqmm (nominal area) multi stranded copper conductor, single core, FR-LSH PVC insulated & unsheathed cable with proper colour coding, 1100 volts grade drawn in ISI marked MMS non-metallic PVC conduit of size not less than 20mm dia conforming to IS 9537:latest, surface type terminated in sunken type GI sheet metal flush boxes of 16 Gauge including all accessories and using 1.5 Sqmm (nominal area) stranded copper conductor single core conductor, FR-LSH PVC insulated & unsheathed cable as in earth wire connected to common earth dolly complete all as specified and directed for following:- NOTE :- (i) Quoted rate shall be deemed to include the cost of cutting chases in walls / pillars /column etc. of any description for concealing the boxes to required depth & making good the disturbed surface in CM 1:4 including finishing the surface to match with the existing surface. If the building is stone masonry, diamond tools must be used to cut the surfaces. (ii) Fittings like switches, sockets, regulators, lamp holders, light fittings shall be measured and paid for separately under appropriate item of Schedule `A'. (iii) The quoted rates shall be deemed to be inclusive for provision and installation of conduits, covering sunken boards/terminal boxes / junction boxes of any shape and size modular white colour cover plate with frame and modular metal flush box. All metal boxes and plates to be of the same make as the switches mentioned in this schedule.

One light/buzzer point controlled by one; one way switch.

One light point controlled by two two way switches

One fan/exhaust fan point controlled by one, one way switch

One 3 pin socket out let 5 amp point on the (same board) with other switches.

One 3 pin socket outlet 5 amp point on the independent board

One light/buzzer point controlled by one; one way switch pertaining to inverter

One fan/exhaust fan point controlled by one, one way switch pertaining to inverter

One 3 pin socket outlet 5 amp point on the independent board pertaining to inverter

All as per item here-in-before but with 2.5 sq mm size FRLSH PVC insulated and unsheathed 1100 volts grade single core stranded (multistrand) copper conductor cable for 3 pin socket outlet 15 amp on independent board.

All as per item 18 above, but with 4 sq mm size FR-LSH PVC insulated and unsheathed 1100 volts grade single core stranded (multistrand) copper conductor cable for ACs and geysers

S&F ceiling rose surface bakelite 63.5 x 20 mm, three terminals, complete all as specified and directed.

S&F modular switch 6 Amp, one way, 1 module, 230 volts AC circuit complete all as specified and directed by Engr-in-charge.

S&F modular switch 6 Amp, two way, 1 module, 230 volts AC circuit complete all as specified and directed by Engr-in-charge.

S&F modular switch 16 Amp, one way, 1 module, 230 volts AC circuit complete all as specified and directed by Engr-in-charge.

S&F modular bell switch 6 Amp, one way, 1 module, 230 volts AC circuit complete all as specified and directed by Engr-in-charge

S&F modular socket, 6 Amp, 2/3 pin combined, 2 module, 230 volts AC circuit complete all as specified and directed by Engr-in-charge

S&F modular socket, 6 /16 Amp, 2/3 pin combined, 2 module, 230 volts AC circuit complete all as specified and directed by Engr-in-charge

S&F modular fan regulator 100 W 2 module, socket type and capacitive type all as specified and directed by Accepting officer

S & F call bell, ding dong AC 230 Volt single pole complete as specified.

S & F earth plug and socket, single pole, neutral sheet metal enclosures with a two pin, plug and socket 20Amp, 240 volts with and including one MCB, SP, 20A, 240 Volts as per all as specified and directed.

Cleaning externally and refixing of earth plug sockets complete all as specified and directed by Enigneer-in-charge

S & F 4ft 20W LED batten tubelight surface/wall mounted with powder coated Aluminium housing, high optically efficient polycarbonate diffuser, inbuilt electronic driver duly wired upto terminal block, luminous efficiency > 100 lm/watt, surge protection upto 4kV, 440V High voltage protection, power factor > 0.95, CRI > 80 all as specified and directed. Model: Crompton Linea Pro or similar

S&F LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete, all as specified and directed.

S&F lamp holder PVC / Polycarbonate type with cord grip cap suitable with T shape B22 LED lamp fitting 12 Watt including the lamp complete all as specified and directed by Engr-in-charge

Taking down distribution boards / main switches of any type, size and capacity complete all as specified and directed by Engr-in-charge

Taking down MCBs, metal clad plug of any type, size and capacity complete all as specified and directed by Engr-in-charge

S & F sheet metal enclosure powder painted for MCB DB SPN 08 way double door with IP-42 protection with Din rail and busbar complete all as specified and directed by Engr-in-charge.

S&F MCB SPN, 6 to 32 Amps in `C’ series having current rating 10 KA complete all as specified and directed.

S&F MCB single pole, 6 to 32 Amps in `C’ series having current rating 10 KA complete all as specified and directed.

Taking Down Old Unserviceable Submain wiring complete including all accessories and making good the disturbed surfaces all as specified and as directed.

M & L for Sub main wiring with 2 runs of PVC insulated unsheathed multi stranded single core copper conducter 6 Sqmm drawn through PVC conduit/casing capping including accessaries with 6 sqmm PVC insulated earth wire fixed to the existing wall with saddles, screws etc after removing the unserviceable wiring and connecting up ,all as directed. Note: 2 runs of cable and one run earth wire and conduit/Casing & Caping will be measured as one length.

M&L for earthing complete with galvanized steel earth plate electrode 600mm X 600mm X 6mm buried directly in ground vertically to a depth not less than 2.25 metre below normal ground level (with top edge of earth plate not less than 1.5 metre below ground level) connected to galvanized iron earth lead wire 4mm dia, (main earthing lead) by means of galvanized bolts, nuts and washers all as shown in electrical plate No 3 of MES Schedule Part-I (2009) with connected to earth test point & to main switch board with & including adequate quantity of charcoal dust and common salt alround earth plate & 15 mm dia GI pipe medium grade for earth lead protection pipe for suitable length and GI pipe 20 mm dia medium grade for watering pipe with funnel & wire mesh including necessary earth work and PCC (1: 3 : 6) type C-1 for earth pit and 40 mm thick precast RCC cover in 1 : 2 : 4 type B-1 with 3 Nos 8 mm dia TMT bars both ways with 12mm dia round bar handle complete all as specified & directed. NOTE: Earth lead wire and its protection pipe upto and including 7.5 mtr only from the top of earth electrode are included under this item and additional earth GI earth wire/protection pipe etc. if any required at site shall be measured and paid for separately under appropriate item of Schedule `A’

S&F LED building security light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection with suitable no of nuts, bolts and clamps complete all as specified and directed by Engr-in-charge

Disconnecting and removing ceiling fan of any sweep any height from electrical connection bringing down, dismantling, cleaning internally and externally thoroughly, lubricating with approved lubricants, reassembling, refixing in original position including minor repairs for the smooth functioning and provision of new flexible wire of size 23/0.0076 multistranded copper conductor cable from ceiling rose to fan including painting of ceiling fan complete with synthetic enamel paint by spraying including filling cavities with filler , one coat after cleaning all dust etc & testing complete all as specified and as directed.

Disconnecting and removing exhaust fan of any sweep any height from electrical connection bringing down, dismantling, cleaning internally and externally thoroughly provision of new flexible wire of size 23/0.0076 multistranded copper conductor cable from ceiling rose to fan including painting of exhaust fan complete with synthetic enamel paint by spraying including filling cavities with filler , one coat after cleaning all dust etc & testing complete all as specified and as directed.

S & F in replacement of louvers with suitable frame work and fixing arrangements for exhaust fan of any size sweep complete including removing the existing unserviceable one complete all as specified and as directed.

Taking Down water heater (Electric Geyser) storage type of any make of 25 / 50 ltr capacity after disconnecting the existing electrical connection along with earth plug socket if existing, water pipes and deposit to E/M store yard and and refixing in the original place/position duly connecting up water supply and electric supply etc.complete after cleaning externally complete all as specified and as directed.

Supply, Install, testing & commissioning factory made indoor type dust and vermin proof CPRI approved Feeder pillar panel board cubical double door hinged type compartmentalized of suitable size 415 volts, AC 50 Hz fabricated of CRCA sheet 3.15 mm thick machine pressed grouted in PCC 1:2:4 type B1 (20mm grade stone aggregated) powder coated inside and outside complete including 4 poles copper bus bar of suitable size mounted on porcelain insulators and enclosed in chamber made out of 3.15mm thick CRCA sheet machine pressed and connection from incoming and outgoing electric cable with suitable size thimbles / lugs cable gland with open able shutters and comprising complete all as specified and as directed .

M&L for cutting round holes suitable for fixing of exhaust fan of size 150 mm into through stone walls built in cement mortar or cement lime mortar and making good in cement mortar 1:3 or cement concrete 1:2:4 type B1 as required and plastering in CM 1:4 external / internal surfaces and finished to match with the existing surfaces complete all as specified and directed by Engr-in-charge.

SRI SAI RAM ENTERPRISES (BID ID -3400824)

Haasith constructions (BID ID -3404731)