Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹95.8 LAccepted-AOC | ₹95.8 L Quoted ₹97.7 L | L1 | Accepted-AOC Lowest and accepted |
| 2 | L2₹1.0 CrRejected-Finance SHOP NO 10 BMC SHOPPING CENTRE MITHA NAGAR GOREGAON W MUMBAI 400 104 | MUMBAI SUBURBAN | MAHARASHTRA | 400104 | ₹1.0 Cr | L2 | Rejected-Finance L2 |
| 3 | L3₹1.1 CrRejected-Finance 1101 A WING SACHDEV COMPLEX JANGAL MANGAL RAOD BHANDUP W MUMBAI 400078 | MUMBAI SUBURBAN | MAHARASHTRA | 400078 | ₹1.1 Cr | L3 | Rejected-Finance L3 |
| 4 | L4₹1.1 CrRejected-Finance FLAT NO 301 PEARL APARTMENT PLOT NO 121 SECTOR 8A AIROLI NAVI MUMBAI 400708 | NAVI MUMBAI | THANE | MAHARASHTRA | 400708 | ₹1.1 Cr | L4 | Rejected-Finance L4 |
| 5 | L5₹1.2 CrRejected-Finance 1 14 SUJAL MANSION B BLOCK BHANGWADI KALBADEVI ROAD MUMBAI 400 002 | MUMBAI | MAHARASHTRA | 400002 | ₹1.2 Cr | L5 | Rejected-Finance L5 |
| Sl No | Description | Qty | Unit | R J ENTERPRISES L4 | Chakshu Enterprise L5 | sapana enterprises L3 | BRITE INDUSTRIES L1 | Shree Ayyappa Engineering L2 |
|---|---|---|---|---|---|---|---|---|
| 1.00 | Mannual Rescue and Operation Rescue of Central AC Plants [Installation consisting of AC plant with chilled water system 150 TR capacity having 03 Nos compressors each of 75 TR capacity (02 Nos working at a time and 01 No. standby) with all connected equipments and machineries as per Serial No 1 of Annexure 'A' to Particular Specifications] round the clock through out the month in three shifts (including Sundays and Holidays) by employing one operator cum AC machenic per shift of eight hours including carrying out routine maintenance and upkeeping the Installation / AC Plants in operation condition complete in all respects as specified and directed :-
Location : Missar Mine Workshop at NAD (Trombay):
(i) 1st shift - 0600 hrs to 1400 hrs
(ii) 2nd shift - 1400 hrs to 2200 hrs
(iii) 3rd shift - 2200 hrs to 0600 hrs
Notes :-
Quoted rates shall also be deemed to include the following elements:-
(i) To provide uniform, tools & plants, safety means like glove etc to the employees and also alternative employee (reliever) for Manning and Operation of AC Plants/Installation so that the other employees can avail the facility of weekly leave etc.
(ii) To keep the AC Plant Room & allied area in clean and tidy condition during the operation period.
(iii) To carryout the routine maintenance, minor repairs, oiling, greasing and to rectify the minor defects to keep the plants / Installation in serviceable condition all as directed by the GE and Engineer-in-Charge. However, the major repairs, replacements, overhauling, gas charging, topping-up oil etc are not included in the scope of the above items.
(iv) To keep necessary documentation duly signed by all the concerned.
(v) To hand over the entire plant in serviceable condition at the time of completion.
(vi) Contractor shall submit the details of payment of wages for staff employed through Aadhaar linked bank accounts for payment purpose. | 11 | Per Month | 1,08,000 ₹11.9 L | 1,05,750 ₹11.6 L | 1,01,700 ₹11.2 L | 90,000 ₹9.9 L | 99,000 ₹10.9 L |
| 2.00 | Mannual Rescue and Operation Rescue of Central AC Plants [Installation consisting of AC Plant of direct expansion type 60 TR capacity having 03 Nos compressors each of 30 TR capacity (02 Nos working at a time and 01 No. standby) with all connected equipments and machineries as per Serial No 3 of Annexure 'A' to Particular Specifications] round the clock through out the month in three shifts (including Sundays and Holidays) by employing one operator cum AC machenic per shift of eight hours including carrying out routine maintenance and upkeeping the Installation / AC Plants in operation condition complete in all respects as specified and directed :-
Location : EKM workshop:
(i) 1st shift - 0600 hrs to 1400 hrs
(ii) 2nd shift - 1400 hrs to 2200 hrs
(iii) 3rd shift - 2200 hrs to 0600 hrs
Notes :-
Quoted rates shall also be deemed to include the following elements:-
(i) To provide uniform, tools & plants, safety means like glove etc to the employees and also alternative employee (reliever) for Manning and Operation of AC Plants/Installation so that the other employees can avail the facility of weekly leave etc.
(ii) To keep the AC Plant Room & allied area in clean and tidy condition during the operation period.
(iii) To carryout the routine maintenance, minor repairs, oiling, greasing and to rectify the minor defects to keep the plants / Installation in serviceable condition all as directed by the GE and Engineer-in-Charge. However, the major repairs, replacements, overhauling, gas charging, topping-up oil etc are not included in the scope of the above items.
(iv) To keep necessary documentation duly signed by all the concerned.
(v) To hand over the entire plant in serviceable condition at the time of completion.
(vi) Contractor shall submit the details of payment of wages for staff employed through Aadhaar linked bank accounts for payment purpose. | 11 | Per Month | 1,08,000 ₹11.9 L | 1,05,750 ₹11.6 L | 1,01,700 ₹11.2 L | 90,000 ₹9.9 L | 99,000 ₹10.9 L |
| 3.00 | Mannual Rescue and Operation Rescue of Central AC Plants [Installation consisting of AC Plant of direct expansion type 30 TR capacity having 02 Nos compressors each of 30 TR capacity (01 No. working at a time and 01 No. standby) with all connected equipments and machineries as per Serial No 4 of Annexure 'A' to Particular Specifications] round the clock through out the month in three shifts (including Sundays and Holidays) by employing one operator cum AC machenic per shift of eight hours including carrying out routine maintenance and upkeeping the Installation / AC Plants in operation condition complete in all respects as specified and directed :-
Location : P-78 Magzine & New Mine Workshop, P-35 at NAD Trombay:
(i) 1st shift - 0600 hrs to 1400 hrs
(ii) 2nd shift - 1400 hrs to 2200 hrs
(iii) 3rd shift - 2200 hrs to 0600 hrs
Notes :-
Quoted rates shall also be deemed to include the following elements:-
(i) To provide uniform, tools & plants, safety means like glove etc to the employees and also alternative employee (reliever) for Manning and Operation of AC Plants/Installation so that the other employees can avail the facility of weekly leave etc.
(ii) To keep the AC Plant Room & allied area in clean and tidy condition during the operation period.
(iii) To carryout the routine maintenance, minor repairs, oiling, greasing and to rectify the minor defects to keep the plants / Installation in serviceable condition all as directed by the GE and Engineer-in-Charge. However, the major repairs, replacements, overhauling, gas charging, topping-up oil etc are not included in the scope of the above items.
(iv) To keep necessary documentation duly signed by all the concerned.
(v) To hand over the entire plant in serviceable condition at the time of completion.
(vi) Contractor shall submit the details of payment of wages for staff employed through Aadhaar linked bank accounts for payment purpose. | 11 | Per Month | 1,08,000 ₹11.9 L | 1,05,750 ₹11.6 L | 92,700 ₹10.2 L | 90,000 ₹9.9 L | 99,000 ₹10.9 L |
| 4.00 | Manual Rescue and operation Rescue of water supply installation with all connected equipments, electric driven pump set, 20,000 Gph, supply lines and machineries (as listed herein under) and internal and external electrification, external water supply system, sumps, overhead reservoirs, service tanks, etc with one operator / technician (01 No/Shift) for 02 shifts, (08 hours each shift) including Sundays and holidays including routine maintenance checks and upkeeping the installation and with the under laid components complete all as specified and as directed by the Engineer-in-charge.
Location : Sewri
(i) 1st shift - 0600 hrs to 1400 hrs
(ii) 2nd shift - 1400 hrs to 2200 hrs
Machineries:
(a) Pumping set 25HP - 02No.
(b) Pumping set 10HP - 02No.
(c) Pumping set 5HP - 02Nos.
(d) Electric control panel - 02No
Note item 01 :-
(a) Material such as cotton waste, dress i.e overall combination (navy blue colour), protective clothing, protective shoes, gas mask, gloves, water testing instruments and other instruments etc, as required for maintenance, manning and operation of plant shall be arranged by the contractor from his own sources for which cost of the same shall deemed to be included in the unit rate. No extra amount shall be paid separately on this account.
(b) Installation shall be manned including Saturdays, Sunday & Holiday.
(c) Proper log sheets for running of the pump house & plants to be maintained.
(d) Testing of water sample during every water supply delivery time and recording test result in a register and to be get signed by Engr-in-charge.
(e) Carry out weekly maintenance of electrical panels installed in pump house and intimate Engr-in-charge immediately for any defects/breakdown/repair required. (f) Carry out tightening of nuts bolts, replace when required, applying gland packing and greasing.
(g) The contractor shall be responsible to keep the water supply installation neat and clean on every day.
(h) All documentation such as log sheets, daily attendance register shall maintain as per procedure in vogue.
(j) If the operator and valve man are found absent from duty, penal recovery shall be made per shift per head are as follows :- (i) Operator - @ Rs 2000 per operation shift per head.
(ii) Valve man - @ Rs 1800/- per operation shift per head. | 11 | Per Month | 72,000 ₹7.9 L | 70,500 ₹7.8 L | 69,000 ₹7.6 L | 69,000 ₹7.6 L | 66,000 ₹7.3 L |
| 5.00 | M & L for carrying out 'B' check of DG Set 625 KVA DG Set at TS Mahul including of 'B' check kit consisting of the following under laid works complete all as specified and as directed by the Engineer-In-Charge.
Make: M/s Kirloskar/M/s Cummins Power System India Ltd
(i) Primary Fuel Filter - 01 Set
(ii) Secondary Fuel Filter - 01 Set
(iii) Oil Filter - 01 No.
(iv) Engine oil as required (Engine oil shall be measured and paid separately)
(v) Complete cleaning of DG Set
(vi) Examination and rectification of engine RPM
(vii) Monitoring of output and maintaining and adjusting speed governor
(viii) Painting of DG sets with two coats of synthetc enamel paint of colour as directed by the Engineer-In-Charge | 2 | Each Job | 20,000 ₹40,000 | 25,000 ₹50,000 | 9,500 ₹19,000 | 25,000 ₹50,000 | 20,000 ₹40,000 |
| 5.01 | All as pere Item No 5.00 above But 100 KVA DG Set at Rukmani TS Mahul | 2 | Each Job | 20,000 ₹40,000 | 20,000 ₹40,000 | 7,500 ₹15,000 | 15,000 ₹30,000 | 20,000 ₹40,000 |
| 5.02 | All as pere Item No 5.00 above But 50 KVA DG Set at NSD Sewri | 2 | Each Job | 20,000 ₹40,000 | 20,000 ₹40,000 | 6,500 ₹13,000 | 10,000 ₹20,000 | 5,000 ₹10,000 |
| 6.00 | M & L for dismantling radiator, draining out water and coolant, cleaning, carrying out required tests for any leakage and rectifying same by bronzing / soldering as required and re-testing for no leakage, etc. and refixing the same in original position and refilling the tank with water including filling in new coolant hrough authorized agencies of the manufacturer of DG Sets complete all as specified and directed by the Engineer-In-Charge for DG Sets 625 KVA DG Set at TS Mahul.
Note : coolent shall be measured and paid separately under respective item of Sch-'A'. | 2 | Each Job | 10,000 ₹20,000 | 8,000 ₹16,000 | 12,500 ₹25,000 | 5,000 ₹10,000 | 10,000 ₹20,000 |
| 6.01 | All as per Item No 6.00 above but 100 KVA DG Set at Rukmani Ts Mahul | 2 | Each Job | 9,500 ₹19,000 | 5,000 ₹10,000 | 5,500 ₹11,000 | 5,000 ₹10,000 | 10,000 ₹20,000 |
| 6.02 | All as per Item No 6.00 above but 50 KVA DG Set at NSD Sewri | 2 | Each Job | 10,000 ₹20,000 | 5,000 ₹10,000 | 5,500 ₹11,000 | 3,000 ₹6,000 | 10,000 ₹20,000 |
Tender Value
₹1.0 Cr
EMD Value
₹1.8 L
Closing Date
4 Mar 2026, 6:00 pmClosed
CWE (SUBS) MUMBAI
Commander Works Engineer Subs NCHC Powai Bhandup Post Office Mumbai 400 078
O/S OF W/S DISTR LINES AND PUMPS, OH TANKS, MOTOR PUMP SET, STANDBY DG SETS, INCL REPAIR/ MAINT OF STANDBY POWER SUPPLY UNITS (DG) AT TS MAHUL AND NSD SEWRI NAD M/O OF CENTRAL AC PLANTS INCL RENEWAL OF W/O DEF U/S SPARES AT NAD UNDER GE (NW) MKD
2026_MES_751069_1
8810/E8
Open Tender
Electrical and Maintenance Works
330 days
MANKHURD
Please refer Tender documents.
8 documents required · 8 mandatory
₹1,000
GE (NW) MANKHURD
₹1.8 L
9 Apr 2026
3 Feb 2026
6 Mar 2026
3 Feb 2026
4 Mar 2026
24 Feb 2026
Manual Rescue and operation Rescue of water supply installation with all connected equipments, electric driven pump set, 20,000 Gph, supply lines and machineries (as listed herein under) and internal and external electrification, external water supply system, sumps, overhead reservoirs, service tanks, etc with one operator / technician (01 No/Shift) for 02 shifts, (08 hours each shift) including Sundays and holidays including routine maintenance checks and upkeeping the installation and with the under laid components complete all as specified and as directed by the Engineer-in-charge. Location : Sewri (i) 1st shift - 0600 hrs to 1400 hrs (ii) 2nd shift - 1400 hrs to 2200 hrs Machineries: (a) Pumping set 25HP - 02No. (b) Pumping set 10HP - 02No. (c) Pumping set 5HP - 02Nos. (d) Electric control panel - 02No Note item 01 :- (a) Material such as cotton waste, dress i.e overall combination (navy blue colour), protective clothing, protective shoes, gas mask, gloves, water testing instruments and other instruments etc, as required for maintenance, manning and operation of plant shall be arranged by the contractor from his own sources for which cost of the same shall deemed to be included in the unit rate. No extra amount shall be paid separately on this account. (b) Installation shall be manned including Saturdays, Sunday & Holiday. (c) Proper log sheets for running of the pump house & plants to be maintained. (d) Testing of water sample during every water supply delivery time and recording test result in a register and to be get signed by Engr-in-charge. (e) Carry out weekly maintenance of electrical panels installed in pump house and intimate Engr-in-charge immediately for any defects/breakdown/repair required. (f) Carry out tightening of nuts bolts, replace when required, applying gland packing and greasing. (g) The contractor shall be responsible to keep the water supply installation neat and clean on every day. (h) All documentation such as log sheets, daily attendance register shall maintain as per procedure in vogue. (j) If the operator and valve man are found absent from duty, penal recovery shall be made per shift per head are as follows :- (i) Operator - @ Rs 2000 per operation shift per head. (ii) Valve man - @ Rs 1800/- per operation shift per head.
M & L for carrying out 'B' check of DG Set 625 KVA DG Set at TS Mahul including of 'B' check kit consisting of the following under laid works complete all as specified and as directed by the Engineer-In-Charge. Make: M/s Kirloskar/M/s Cummins Power System India Ltd (i) Primary Fuel Filter - 01 Set (ii) Secondary Fuel Filter - 01 Set (iii) Oil Filter - 01 No. (iv) Engine oil as required (Engine oil shall be measured and paid separately) (v) Complete cleaning of DG Set (vi) Examination and rectification of engine RPM (vii) Monitoring of output and maintaining and adjusting speed governor (viii) Painting of DG sets with two coats of synthetc enamel paint of colour as directed by the Engineer-In-Charge
All as pere Item No 5.00 above But 100 KVA DG Set at Rukmani TS Mahul
All as pere Item No 5.00 above But 50 KVA DG Set at NSD Sewri
M & L for dismantling radiator, draining out water and coolant, cleaning, carrying out required tests for any leakage and rectifying same by bronzing / soldering as required and re-testing for no leakage, etc. and refixing the same in original position and refilling the tank with water including filling in new coolant hrough authorized agencies of the manufacturer of DG Sets complete all as specified and directed by the Engineer-In-Charge for DG Sets 625 KVA DG Set at TS Mahul. Note : coolent shall be measured and paid separately under respective item of Sch-'A'.
All as per Item No 6.00 above but 100 KVA DG Set at Rukmani Ts Mahul
All as per Item No 6.00 above but 50 KVA DG Set at NSD Sewri
Supply only distilled water in sealed bottles of 1 litre capacity complete all as specifed.
Supply only multi-grade 20 W 40 engine oil for topping upto required levels complete all as specified and as directed by the Engineer-In-Charge. Make : Castrol/Servo/Bharat Petroleum
Supply only coolent for engines for topping up to required levels complete all as specified and as directed by the Engineer-In-Charge. Make : Castrol/Servo/Bharat Petroleum
Supply and fix battery terminal, heavy duty, suitable for 92AH/180AH 12 V battery, as fixed in repairs complete all as specified and directed by the Engineer-In-Charge.
Supply and fix in replacement battery heavy duty 12 Volts 180 AH maintenance free. Make : Exide/Amron/Cummins
M & L for dismantling fuel tank and draining out fuel in tank, cleaning the tank using pressure jet process, de-scaling the tank completely and refixing the tank in original position and refilling the tank with fuel retrieved on duly calibrating the same through authorised agencies of the manufacture (of DG Sets) complete all as specified and directed by the engineer - in - charge for DG sets 625 KVA DG Set at TS Mahul.
All as per item No. 12.00 above but 100 KVA DG Set at Rukmani Ts Mahul
All as per item No. 12.00 above but 50 KVA DG Set at NSD Sewri
Dismantling the U/S stator exiter coil assembly from the 625 KVA engine housing transporting the same to workshop & refixing testing the same at site after the following repairs (i) dismantling the old U/S winding and rewinding the stator with equivalent size size of super enamalled copper wire to match the original rating & output complete with E class insulation & Lamination Location : TS Mahul
S & F in replacement solenoid switch for control of fuel governor, operation in 12 Volts DC supply as per existing model fixed complete all as specified and as directed by the Engineer-In-Charge.
S & F new movable battery charger for battery charging purpose of the DG Set as a back up in case of any failure to the panel for the uninterrupted DG supply all as specified and as directed by Engineer-In-Charge.
M & L for repair of various places Panel board of water supply installation,Relay for 25 HP Starter
All as per Item No 16.00 above but Relay for 20 HP Starter
All as per Item No 16.00 above but Relay for 10 HP Starter
All as per Item No 16.00 above but Relay for 7.5/5 HP Starter
All as per Item No 16.00 above but Timer 800 SD
All as per Item No 16.00 above but Indicator lamp RBY 230 V
S & F in replacement of Power contactor current rating 500A fixed complete all as specified and as directed by the Engineer-In-Charge.conform to Cat No LC1E400 of Schneider or equivalent from CG / L&T
Supply and fix in replacement MCCB 200 Amp TP ,415 V, 25 KA fixed type, including taking down of old unsv MCCB after disconnecting existing cables and reconnecting the cabes with proper lugs and glands to new MCCB's complete all as specified and directed. Make : Schneider/Indo Asian/Havells/standard
All as per ser item No 18.00 above but MCCB 100 Amp
All as per ser item No 18.00 above but MCCB 63 Amp
M&L for earthing complete with GI steel earth plate electrode 60cm x 60cmx6 mm thick barried directly in ground vertically to a depth not less than 2.25 metres below ground level with top edge of earth plate at a depth not less than 1.5 mtrs below level ground, connected to GI srtip 32x6mm by means of nuts, bolts checks nuts and washers made of GI iron or steel earth wire protected by GI iron pipe 40mm bore, medium grade and connected to main switch board or main control board as directed and including concrete pit in PCC (1:3:6) type C1, pre-cast RCC over slab 30cmx30cmx10cm with one lifting handle made of 8mm dia MS bar funnel wire mesh, 20mm bore GI or steel pipe medium grade for watering, charcoal or coke and salt in alternate layers, necessary excavation and earth work in any type of soil complete all as shown in electrical plate No 3 of MES schedule Part-I and testing after completion.
Calibration and overhauling of injector assembly of 625 KVA DG Set including replacement of necessary spare parts as directed. Location : TS Mahul
Calibration and overhauling of injector assembly of 100 KVA DG Set including replacement of necessary spare parts as directed. Location : TS Mahul
Taking out of UNSV water pump assy 625 KVA Kirloskar/Cummins engine and carrying out overhauling including supply and fix water pump kit all as directed and specified. Location : TS Mahul
Taking out of UNSV water pump assy 50 KVA Kirloskar engine and carrying out overhauling including supply and fix water pump kit all as directed and specified.
Preparing old painted surface of 625 KVA DG set including cleaning throughly scraping and applying two coats of synthetic enamel paint over a coat of red oxide primer using spary painting including writing SM/MES No on the body of the DG Set complete all as directed by Engr-in-Charge. Location : TS Mahul
Calibration and over hauling of PT pump with replacement of following for 100 KVA (Make : Kirloskar Cummins) Location : TS Mahul DG Set :- (a) Throttle shaft of PT Pump. (b) Kit barrel and plunger. (c) Gasket Set. (d) Shim. (e) Washer. (f) Gear pump. (g) Seals. (h) Gear pump adopter (j) Elbow. (k) Cap screw. (l) 'O' ring. (m) Screen filter.
Calibration and over hauling FTP or PT Pump of 50 KVA DG Set with replacement of the following parts :- (a) Delivery valve - 06 Nos. (b) Bearing - 02 Nos. (c) Elements - 06 Nos. (d) Main spring - 06 Nos. (e) Gasket sets. (f) Seal. (g) Cap screw. (h) 'O' ring - 01 Set. (j) Governer assembly - 01 Set. (k) Screen filter.
Supply and Laying or fixing or passing through pipe, XLPE/PVC insulated, armoured heavy duty electric cable with aluminium conductor 1100 volts grade cross sectional area 10 Sqmm 4 core including necessary connection and providing cable lugs as required including disconnection/taking down of existing cable all as specified.
Supply and Laying or fixing or passing through pipe, XLPE/PVC insulated, armoured heavy duty electric cable with aluminium conductor 1100 volts grade cross sectional area 70 Sqmm 3.5 core including necessary connection and providing cable lugs as required including disconnection/taking down of existing cable all as specified.
Excavation in trenches not exc. 1.5 metre wide and not exc. 1.50 mtr depth for laying of underground cable, erection of poles etc. and getting out in soft/loose soil including separating serviceable bricks for re-use at site obtained during excavation complete all as specified and directed.
Returning, filling in including spreading, levelling, watering and well ramming in layers not exceeding 25cm thick complete all as specified and directed.
Removal of surplus soil not exc 50mtr distance and depositing where directed.
Supply and laying un-reinforced precast concrete cable cover class LV, type-I, flat size 250 mm x 150 mm x 40 mm laid in trenches etc. complete all as specified and as directed.
M&L sand cushioning for protection of cable complete all as specified and directed.
M&L for cleaning underground / semi-underground sumpsof 10,000 gal capacity by draining out sludge from bottom, by blocking all inlet/outlet, removing alge-fungi growth from wall, floor, ceiling by wire brush/ water jet pressure machine, cleaning complete surface and dis-infecting with bleaching powder all as specified and directed.
All as per Item No 34.00 above but 20,000 gallons capacity.
M & L for dismantling carefullly fly wheel ring of 625 KVA DG Set and supply and fix new wheel ring to match the grooves of starter of existing model complete and testig for satisfactorily functioning. Location : TS Mahul
M & L for dismantling fuel level indicator pipe and supply and fix new PVC heavy duty white transparent pipe to botton and top fuel level knob and mark the levels of fuel tank including two nos. jublee clips of suitable size all as specified and as directed by Engineer-In-Charge.
M&L for Cleaning of underground/semi underground sump/well by draining out sludge from bottom, by blocking all inlet/outlet, removing alge-fungi growth from wall, floor, ceiling by wire brush/ water jet pressure machine, cleaning complete surface and dis-infecting with bleaching powder and marking cleaning date and due date all as specified and directed. NSD Sewri. (a) 90800 ltrs capacity
-ditto- all as per item No. 37.00 but Capacity of 68100 ltrs.
-ditto- all as per item No. 37.00 but Capacity of 65000 ltrs. Location : TS Mahul
-ditto- all as per item No. 37.00 but Capacity of 55000 ltrs. Location : TS Mahul
-ditto- all as per item No. 37.00 but Capacity of 38000 ltrs. Location : TS Mahul
S & F foot valve of 150 mm bore, in cast iron body, ball type, with flanged and drilled ends and synthetic rubber coated MS ball, conformimg to relevant IS, ISI marked, including all joints, gaskets, bolts and nuts, washers, including taking up/down old unserviceable valves from any position and any addition/alteration for fixing required complete all as specified and directed by the engineer in charge.
Fabricate supply and fix valve chamber covers made out of suitable size MS angle/MS plate/flat/rod, hinges, locking arrangement including painting with two coats of synthetic enamel paint over one coat of red oxide primer including removing existing unserviceable rusted cover all as directed.
Dismantling unsv PVC water tanks and S&F 500 litre capacity ISI marked rotational moulded polythene water storage tank with cover cylinderical vertical type clossed top hoisted and fixed in position all as specified. ( Tank Covers shall be Cast Iron casted all as per BMC approval norms and cost of the same is deemed to be included in this Item rate) Make of Tank :- Sintex / Polygon (ISI Marked )
All as per item No 40.00 above but 1000 litre capacity
All as per item No 40.00 above but 2000 litre capacity
Supply, testing and fix Cast iron water meter of 50 mm class B flange type conforming to IS-2373 including all necessary alteration required and including new nuts/bolts/washers of rubber gaskets complete with testing all as specified and as directed.
-Ditto- all as per item No 41.00 above but 100mm bore
-Ditto- all as per item No 41.00 above but 150mm bore
Supply, install, in repair/ renewal feeder piller box outdoor type, IP-54 protection CPRI approved, factory fabricated, cubical panel wall mounted, self supported, free standing type, made out of 3 m thick CRCA sheet with locking arragement, suitable for 3 phase, 4 wire, 415 volt, 50HZ, AC supply including suitable size copper conductor control wiring and powder coating with connecting the cables with necessary cable glands, lugs etc proper arrangement for veritilation complete with and including the following accessories :- Location: NSD Sewri & TS Mahul (i) Copper bus bar Phases & Neutral for 200 Amps- 01 set (a) MCCB 4 pole 25 KA 100A - 1 Nos (b) MCB TPN 40 Amp 10 KA- 01 Nos (c) MCB SPN 32 Ampc 10 KA - 01 Nos
-diito- all as per item No. 46.00 hereinbefore but for Condensar of AC Plant of 3x30 TR Capacity of EKM WKSP at NAD
-diito- all as per item No.46.00 hereinbefore but for Condensar of AC Plant of 3x15 TR Capacity AWS at NAD
-ditto- all as per item No. 46.00 herein before but for AC Plant of 3 x 30 TR Capacity P-35, 2 x 30 TR Capacity P-78 capacity EKM WKSP at NAD
Dismantling cooling coil section of AHU for descaling and provision of 2 Nos 15mm tee outlet for local circulation of mild acid solution in the coil. Separate container and small pump set shall be used to circulate mild acid solution with 4 PH value. The Scalgun WS/Cleansol or equivalent solution as approved by the GE shall be used for descaling. If the PH value remains less than 7, flush with fresh water added with sodium carbonate till PH value attains to 7. Refixing the coil section in position, carryout minor repairs including fixing arrangement etc. AHU coil fins shall be cleaned by Sealgum solution by spraying the solution with washing pump upto the required level for 150 TR
-ditto- all as per item No. 47.00 herein before but for the chiller connection of AC Plant of 3 x 30 TR Capacity of P-35, 2 x 30 TR Capacity of P-78, 3 x 30 TR capacityof EKM WKSP at NAD and HQ 31 WEU Thane
-ditto- all as per item No. 47.00 herein before but for the chiller connection of AC Plant of 3 x 15 TR Capacity AWS at NAD
Supply only refrigerant (R-22) gas as per requirement, complete all as specified and directed. Make : MAFRON/FLORON/ REFRON/ FREON
Supply only refrigerant (R-407 C )gas as per requirement, complete all as specified and directed. Make : MAFRON/FLORON/ REFRON/ FREON.
Supply only compressor oil as per requirement, complete all specified and directed. Make : Servo, HP, BP, Sheetal N-68, Freezol 36.
-ditto- all as per item No. 51.00 hereinbefore but for 60 TR capacity (Location : EKM NAD)
-ditto- all as per item No. 51.00 hereinbefore but for 60 TR capacity (Location : P-35 NAD)
-ditto- all as per item No. 51.00 hereinbefore but for 38 TR capacity (Location :P-78 NAD)
-ditto- all as per item No.51.00 hereinbefore but for 30 TR capacity (Location MAGZINE & AWS NAD)
-ditto- all as per item No. 51.00 hereinbefore but for 60 TR capacity (Location : 31 WEU THANE)
Supply only following spares for compressor reciprocating type model SMC- 8-65, Make : ACCEL :
Crank shaft duly remetalised, grinded, polished and made to size to match with the existing, Cat No. F-7713
Piston Cat No. F-6503
Piston Oil rings Cat No.F-6523
Main sealing bearing (Set of two) Cat No. F-7276
Liner assembly Cat No. F-7167
Oil pump assembly Cat No. F-6501
Rocker arm Cat No. F-7166
Loader/unloader spring Lock Cat No. F-7277
Piston sleeves bushing with collar, Cat No. F-7165
Suction valve reeds Cat No. F-8162
Discharge valve reeds Cat No. F-6504
Oil filter Cat No. F-7796
Suction Filter Cat No. F-7167
Oil pressure regulating valve Cat No. F-6507
Connecting rod bearing Cat No. F-7164
Gasket set of make Neopene or equivalent as appoved by the GE
Compressor safety valve Cat No. F-7278
Shaft seal assembly, Cat No. F-7646
Supply only following spares for compressor reciprocating model SMC-4-70, Make : ACCEL :
Crank shaft duly remetalised, grinded, polished and made to size to match with the existing, Cat No. F -7803
Piston Cat No. V5124A
Piston Oil rings Cat No.V5485
Main sealing bearing (Set of two) Cat No. F-7276
Liner assembly Cat No. F-7167
Oil pump assembly Cat No. F-6501
Rocker arm Cat No. F-7166
Loader/unloader spring Lock Cat No. F-7277
Piston sleeves bushing with collar, Cat No. F-7165
Suction valve reeds Cat No. F-8162
Discharge valve reeds Cat No. F-6504
Oil filter Cat No. F-7796
Suction Filter Cat No. F-7167
Oil pressure regulating valve Cat No. F-6507
Connecting rod bearing Cat No. F-7164
Gasket set of make Neopene or equivalent as appoved by the GE
Compressor safety valve Cat No. F-7278
Shaft seal assembly, Cat No. F-7646 Note : The quantity of item Nos 35.00 to 35.18 shall be operated only to the extent required replacement for compressors under item No. 35.00 here-in-before. Unless othewise specified in the BOQ, these shall be of make ACCEL & of mentioned Cat No in the BOQ and shall be suitable for the compressors under item No 35.00 all as directed and approved by the GE.
Supply only following spares for compressor reciprocating model 5 H-40 Make VOLTAS
Crank shaft duly remetalised, grinded, polished and made to size to match with the existing, Cat No. F -7803
Piston Cat No. V5124A
Piston Oil rings Cat No.V5485
Main sealing bearing (Set of two) Cat No. F-7276
Liner assembly Cat No. F-7167
Oil pump assembly Cat No. F-6501
Rocker arm Cat No. F-7166
Loader/unloader spring Lock Cat No. F-7277
Piston sleeves bushing with collar, Cat No. F-7165
Suction valve reeds Cat No. F-8162
Discharge valve reeds Cat No. F-6504
Oil filter Cat No. F-7796
Suction Filter Cat No. F-7167
Oil pressure regulating valve Cat No. F-6507
Connecting rod bearing Cat No. F-7164
Gasket set of make Neopene or equivalent as appoved by the GE
Compressor safety valve Cat No. F-7278
Replacement of unserviceable MS pipe, heavy grade of following sizes (condenser water tubing from the cooling tower area) including provision of all fittings, welding and connected works as required for smooth functioning of AC Plants, complete all as specified and directed, Make : TATA/JINDAL :-
150mm bore
100 mm bore
40 HP Capacity
20/25 HP Capacity
10 /15HP Capacity
5/7.5 HP Capacity
Supply only following spares /components/parts for monoblock pump set all as specified and directed :-
Gun metal bushes for 40 HP capacity
Gun metal bushes for 20/25 HP capacity
Gun metal bushes for 10HP capacity
Gun metal bushes for 7.5 HP capacity
Gland packing set for 40 HP capacity
Gland packing set for 20/25 HP capacity
Gland packing set for 10 HP capacity
Gland packing set for 7.5HP capacity
Bearing for 7.5 HP capacity Make : SKF, TATA, NBC
Bearing for10 HP capacity Make : SKF, TATA, NBC
Water seal packing for 7.5 HP capacity
Water seal packing for 10 HP capacity Note : The quantity of item Nos 28.01 to 28.12 shall be operated only to the extent required replacement for Pumps under item No. 27.01 x 27.04 here-in-before. These shall be of makes as specified and in case, makes are not mentioned in these tender documents, the same shall be as per the existing and shall be suitable for the pumps under item No 27.01 to 27.04 all as directed and approved by the GE.
Suply and fix in repairs Cast Iron butterfly valve including flange, nuts, bolts, rubber, gaskets etc suitable for 50mm bore pipe, complete all as specified and directed.
Suply and fix in repairs Cast Iron butterfly valve class PN-16 including flange, nuts, bolts, rubber, gaskets etc suitable for 80mm bore pipe, complete all as specified and directed.
Suply and fix in repairs Cast Iron butterfly valve PN-16 including flange, nuts, bolts, rubber, gaskets etc suitable for 100mm bore pipe, complete all as specified and directed.
Suply and fix in repairs Cast Iron butterfly valve PN-16 including flange, nuts, bolts, rubber, gaskets etc suitable for 150mm bore pipe, complete all as specified and directed.
Suply and fix in repairs Cast Iron Non-return butterfly valve PN-16 including flange, nuts, bolts, rubber, gaskets etc suitable for 100mm bore pipe, complete all as specified and directed.
Repair & refixing 60 to 78 TR chiller after removing suction / discharge pipe line of gas / water transporting the chiller to workshop, opening both and flange of chiller, cleaning the shell side of chiller and copper tubes with fresh water, pressure testing with water, keeping chiller 24 hrs of pre testing, chocked copper tubes 3/4" 120 nos removed the existing chiller after brazing / welding closing the both end flange with new gasket after changing the nuts and bolts ,pressure testing carried out after changing the tubes, transporting the chiller to site complete with new nuts & bolts in orginal position connecting suction / discharge gas line by welding & brazing, vaccumising the system, pressure testing N2 gas if no leakage found, gas charging with required R22 Insulating the chiller nitrile rubber sheet can chiller body and suction / discharge gas pipeline in orginal position testing the system for smooth functioning all as specified & directed by Engineer - in - charge
Material and labour for repairs to Microprocessor of 30 TR Capacity AC Plant chiller unit including replacing diods, transistors and wiring etc all as specified and directed.
Please Enable Macros to View BoQ information
stage.html
html • 0.06 MB
technical_841182.pdf
techsummary_841182.pdf
finance_841182.pdf
BOQ Comparative Chart
xlsx
finsummary_841182.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.39 MB
Tenderdocus.pdf
Tender Documents • 2.25 MB
BOQ_841182.xls
BOQ • 0.75 MB
Download all tender documents and submit your bid