ARM Civil works at ESIC MCH KK Nagar for 2025-26 one year

Supplying of Flat pressed three layer or graded wood particle board (medium density) exterior grade Grade 1, FPT-1, conforming and marked to IS:3087 12 mm thick

Supplying of Brass mortice latch and lock 100x65 mm with 6 levers and a pair of brass lever handles.

Supplying of Stainless steel SS grade 304, curtain rod 20 mm dia 1.20 mm

Supplying of Bright finished or black enameled mild steel screws 50 mm

Supplying of Bright finished or black enameled mild steel screws 40 mm

Supplying of Bright finished or black enameled mild steel screws 25 mm

Supplying of Bright finished or black enameled mild steel screws 20 mm

Supplying of ISI marked aluminium butt hinges anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade 125x63x4 mm

Supplying of ISI marked aluminium butt hinges anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade 100x63x3.2 mm

Supplying of ISI marked aluminium butt hinges anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade 75x63x3.2 mm

Supplying of aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, 250x16 mm

Supplying of aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade 250x10 mm

Supplying of aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade 100x10 mm

Supplying of aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, 100 mm with plate 150 x 32 mm

Supplying of aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, 75mm with plate 125 x 32 mm

Supplying of Water proofing materials

Supplying of Steel weld mesh

Supplying of Bleaching powder in case of necessity for any work related to day to day maintenance

Supply and fixing of C.I. bracket for wash basin and sinks

Supply and fixing of Mirror of superior make glass 60x45 cm

Unplasticised P.V.C. connection pipe with brass union 45 cm long 15 mm bor

Supply and fixing of White plastic seat (solid) with lid C.P. brass hinges and rubber buffers

Supply and fixing of Shower rose C.P. brass for 15 to 20 mm inlet 150 mm dia

Supply and fixing of Vitreous china lipped front urinal

Supply and fixing of ball valve (brass) of approved quality, High or low pressure, with plastic floats complete :25 mm nominal bore

Supply of white vitreous china Flat back wash basin of size 630x450 mm

Supply of Float glass panes of nominal thickness 5 mm (weight not less than 12.50 kg/sqm

Supply of 12 mm commercial ply

Supply of Aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete

Supply and fixing of 16mm thick extruded terracotta tiles of other than grey colour of size 300 x 595mm

Supplying of bright finished brass 100 mm mortice latch and lock, ISI marked, with six levers and a pair of anodised (anodic coating not less than grade AC 10 as per IS : 1868) aluminium lever handles of approved quality

Supply and fixing of Vitreous china flat back wash basin 450x300 mm

12.5 mm thick tapered edge moisture resistant plain gypsum plaster board confirming to IS 2095 (Part 1):2011

Aluminium hanging floor door stopper with twin rubber & stopper

Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 - with drain board 510 x 1040 mm bowl depth 200 mm

Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 - - without drain board 610x460 mm bowl depth 200 mm

Rectangular shape 453x357 mm Mirror with Plastic moulded frame

Supply and fixing of Flexible (coil shaped) PVC waste pipe for sink and wash basin 32mm dia with length not less than 700 mm i/c PVC waste fittings

Supply and fixing of CP Brass Single lever telephonic wall mixer of approved make

Supply and fixing of UPVC pipe clip 75 mm

Supply and fixing of UPVC pipe clip 110 mm

Supply and fixing of C.P. Brass bibcock 15 mm

Supply and fixing of C.P. Brass long body bibcock 15 mm

Supply and fixing of C.P. Brass stop cock (concealed) 15 mm

Supply and fixing of C.P. Brass angle valve 15 mm

Supply and fixing of Flushing Cistern P.V.C. 10 litre capacity (low level)(White) (with fittings, accessories and flush pipe)

Dash hold fastener 12.5 mm dia, 50 mm long with 6 mm dia bolt

Supply and fixing of EPDM Gasket for uPVC window/door

Supply and fixing of Double action hydraulic floor spring with stainless steel cover plate

Supply of PTMT shelf 440 mm long, 124 mm width and 36 mm height of approved quality and colour, weighing not less than 300 gms

Supply of PTMT Soap Dish/Holder 138x102x75 mm

Stainless steel butt hinges 100x58x1.9 mm IS : 12817 marked

Stainless steel butt hinges 75x47x1.8 mm IS : 12817 marked

Supply of stainless steel soft closing spring hinges at 0 degree hinges (hydraulic type) of approved make/brand to cupboard shutters with full threaded steel screws including making necessary recess in board and finished etc. complete as per direction of Engineer-in-charge

Stainless steel telescopic drawer channels 500mm long

Calcium Silicate tegular edged celling tiles 595x595 mm and 15 mm thick on edges

Galvanised Steel main Tee ceiling section Size 24x38x0.33 mm (3 metre long)

Galvanised Steel perimeter wall Angle Size 24 x 24 x 0.40 mm (3.00 metre long)

Galvanised Steel intermediate cross T section Size 24 x 25 x 0.33mm (1.2 metre long)

Galvanised Steel intermediate cross T section Size 24 x 25 x 0.33mm (0.6 metre long)

Wooden screws with plastic rawl plugs 35x8 mm

Supply of GI Metal Tile Clip in Plain Beveled edge global white colour tiles of size 600x600 mm and 0.5mm thick

Hanger rod 4mm thick

Adjustment clip 85x30x0.8 mm

Soffit cleat (Size 27x37x25x1.60 mm)

Chlorinated Polyvinyl - chloride (CPVC) pipe 20 mm nominal dia

Chlorinated Polyvinyl - chloride (CPVC) pipe 25 mm nominal dia

Chlorinated Polyvinyl - chloride (CPVC) pipe 32 mm nominal dia

Chlorinated Polyvinyl - chloride (CPVC) pipe 40 mm nominal dia

Chlorinated Polyvinyl - chloride (CPVC) pipe 50 mm nominal dia

Chlorinated Polyvinyl - chloride (CPVC) pipe 65 mm nominal dia

Chlorinated Polyvinyl - chloride (CPVC) pipe 80 mm nominal dia

Chlorinated Polyvinyl - chloride (CPVC) pipe 100 mm nominal dia

Chlorinated Polyvinyl - chloride (CPVC) pipe 150 mm nominal dia

Supply of Weather Silicon sealant

1.0 mm thick decorative laminated sheet

Supply of stainless steel (SS-304 grade) friction hinges to the side/top hung uPVC windows, of approved quality, with necessary stainless steel screws etc. as per direction of Engineer-in-charge. 300 x 19 x 1.9 mm

Providing and fixing of Cuddapah Slab 38 / 40mm Thick

Brass Chromium Plated Pillar Tap (Heavy Type) - 15 / 12mm dia

CP Shower Arm with Overhead Shower Rose

Wooden Plug, Clamp and Screws

Supply PVC Adhesive (Solution)

Supply of UPVC Adhesive

Supply of CPVC Adhesive

Supply of Thread Ball

Supply of CP Heavy Duty Bottle Trap 32mm

SS Elbow Action Tap of size 15mm

Brass Chromium Plated Towel Rail 60cm long and 20mm dia with Brackets

PVC Nahini / Floor Trap with PVC Grating 100mm x 75mm

Supply and fixing of Manhole Cover 60 x 60cm (Heavy Duty) with Frame

Supply and fixing of Premium Vertical Blinds

Supply and fixing of Stainless Steel Health Faucet

Vinyl Flooring 2mm thick

Manhole Cover SFRC 600mm x 600mm

Supply and fixing of PVC Pipes:Working Pressure: 4 kg. per cm2 Finolex (or) Equivalent (with ISI Monogram) 50mm dia

Supply and fixing of PVC Pipes:Working Pressure: 4 kg. per cm2 Finolex (or) Equivalent (with ISI Monogram) 63mm dia

Supply and fixing of PVC Pipes:Working Pressure: 4 kg. per cm2 Finolex (or) Equivalent (with ISI Monogram) 75mm dia

Supply and fixing of PVC Pipes:Working Pressure: 4 kg. per cm2:110mm dia

Supply and fixing of PVC Pipes:Working Pressure: 6 kg. per cm2:75mm dia

Supply and fixing of PVC Pipes:Working Pressure: 6 kg. per cm2:110mm dia

Supply and fixing of PVC Pipes:Working Pressure: 6 kg. per cm2: Finolex (or) Equivalent (with ISI Monogram) 160mm dia

Supply and fixing of PVC Pipes:Working Pressure: 10 kg. per cm2: 25mm dia

Supply and fixing of PVC Pipes:Working Pressure: 10 kg. per cm2: 32mm dia

Supply and fixing of PVC Specials for Sanitary Arrangements: Door Elbow:75mm

Supply and fixing of PVC Specials for Sanitary Arrangements:Door Elbow:110mm

Supply and fixing of PVC Specials for Sanitary Arrangements:Tee with Door (Single):75mm

Supply and fixing of PVC Specials for Sanitary Arrangements:Tee with Door (Single):110mm

Supply and fixing of PVC Specials for Sanitary Arrangements:Bend:75mm

Supply and fixing of PVC Specials for Sanitary Arrangements:Bend:110mm

Supply and fixing of PVC Specials for Sanitary Arrangements:“Y” with Door (Single):75mm

Supply and fixing of PVC Specials for Sanitary Arrangements:“Y” with Door (Single):110mm

Supply and fixing of PVC Specials for Sanitary Arrangements:Reducer:110mm x 75mm

Supply and fixing of PVC Specials for Sanitary Arrangements:Shoe:110mm

Supply and fixing of PVC Specials for Sanitary Arrangements:Vent Cowl:75mm

Supply and fixing of PVC Specials for Sanitary Arrangements:Vent Cowl:110mm

Supply and fixing of UPVC Specials:Reducer:50mm x 40mm dia

Supply and fixing of UPVC Specials:Reducer:40mm x 32mm dia

Supply and fixing of CPVC Specials:Elbow:50mm

Supply and fixing of CPVC Specials:Elbow:40mm

Supply and fixing of CPVC Specials:Elbow:32mm

Supply and fixing of CPVC Specials:Elbow:25mm

Supply and fixing of CPVC Specials:Elbow:20mm

Supply and fixing of CPVC Specials:Tea:50mm

Supply and fixing of CPVC Specials:Tea:40mm

Supply and fixing of CPVC Specials:Tea:32mm

Supply and fixing of CPVC Specials:Tea:25mm

Supply and fixing of CPVC Specials:Tea:20mm

Supply and fixing of CPVC Specials:Coupling:50mm

Supply and fixing of CPVC Specials:Coupling:40mm

Supply and fixing of CPVC Specials:Coupling:32mm

Supply and fixing of CPVC Specials:Coupling:25mm

Supply and fixing of CPVC Specials:Coupling:20mm

Supply and fixing of CPVC Specials:Union:50mm

Supply and fixing of CPVC Specials:Union:40mm

Supply and fixing of CPVC Specials:Union:32mm

Supply and fixing of CPVC Specials:Union:25mm

Supply and fixing of CPVC Specials:Union:20mm

Supply and fixing of CPVC Specials:Nipple:50mm

Supply and fixing of CPVC Specials:Nipple:40mm

Supply and fixing of CPVC Specials:Nipple:32mm

Supply and fixing of CPVC Specials:Nipple:25mm

Supply and fixing of CPVC Specials:Nipple:20mm

Supply and fixing of CPVC Specials:Nipple:15mm

Supply and fixing of CPVC Specials:20mm x 16mm Reducer: (i) coupler

Supply and fixing of CPVC Specials:25mm x 20mm Reducer: (i) coupler

Supply and fixing of CPVC Specials:32mm x 25mm Reducer: (i) coupler

Pruning the branches in the felled trees and stacking

Dewatering using 3HP to 70HP diesel engine pumpset including Hire charges, cost of Diesel, Engine oil, pump operator, labour charges, conveyance of pumpset and fuel to site and back, loading, unloading and any other incidental charges etc., complete. Hire charges for Diesel Pump set for 3 HP

Dewatering using 3HP to 70HP diesel engine pumpset including Hire charges, cost of Diesel, Engine oil, pump operator, labour charges, conveyance of pumpset and fuel to site and back, loading, unloading and any other incidental charges etc., complete. Hire charges for Diesel Pump set for 5 HP

Dewatering using 3HP to 70HP diesel engine pumpset including Hire charges, cost of Diesel, Engine oil, pump operator, labour charges, conveyance of pumpset and fuel to site and back, loading, unloading and any other incidental charges etc., complete.Hire charges for Diesel Pump set for 20 HP

Supply and fixing of C.P. Flush cock (15mm)

Providing and Applying Acrylic Co Polymer single component specially designed waterproof protective coating that prevents damp patches on walls without any dilution at rate of 0.25kg/m2 in 2 coats to achieve total dry film thickness of 170 microns DFT. The material having followed technical properties: crack bridging ability up to 1mm as per EN 1062, Tensile strength ≥ 2N/mm2 as per ASTM D 412, adhesion strength 1.5N/mm2 as per ASTM D4541. The finished cost including surface preparation completely as per specification.

Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5 m in width as well as 10 sqm on plan including getting out and disposal of excavated earth upto 50 m and lift upto 1.5 m, as directed by Engineer-in- Charge: All kind of soil

Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in charge. - All kinds of soil

Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20cm in depth, including consoli-dating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50m : All kinds of soil Pipes, cables etc. Pipes, cables etc, not exceeding 80 mm dia.

Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete.

Supplying chemical emulsion in sealed containers including delivery as specified: Chlorpyriphos emulsifiable concentrate of 20%

Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion) : Treatment of existing masonry using chemical emulsion @ one litre per hole at 300 mm interval including drilling holes at 45 degree and plugging them with cement mortar 1:2 (1 cement : 2 coarse sand) to the full depth of the hole :With Chlorpyriphos E.C. 20% with 1% concentration

Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion) : Treatment at points of contact of wood work by chemical emulsion Chlorpyriphos (in oil or kerosene based solution) @ 0.5 litres per hole by drilling 6 mm dia holes at downward angle of 45 degree at 150 mm centre to centre and sealing the same.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level: 1:2:4 (1 cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size).

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level: 1:5:10 (1 Cement : 4 coarse sand (zone-III) : 10 graded stone aggregate 40 mm nominal size)

Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement: 3 coarse sand : 6 graded stone aggregate 20mm nominal size) over 75mm thick bed of dry brick ballast 40mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth.

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement :1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources).

Centering and shuttering including strutting, propping etc. and removal of form for: Lintels, beams, plinth beams, girders, bressumers and cantilevers

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more.

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:6 (1 cement : 6 coarse sand)

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level upto floor V level in all shapes and sizes in: Cement mortar 1:6 (1 cement : 6 coarse sand)

Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in super structure above plinth level upto floor V level. Cement mortar 1:4 (1 cement :4 coarse sand)

Brick edging 7cm wide 11.4 cm deep to plinth protection with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 including grouting with cement mortar 1:4 (1 cement : 4 fine sand).

Providing and fixing 18mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Granite stone slab of all colour and texture except black, Cherry/ Ruby red: Area of slab over 0.50 sqm

Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. Granite work

Mirror polishing on marble work/Granite work/stone work where ever required to give high gloss finish complete.

Providing and fixing 75 mm high, 50 mm deep and 18 mm thick stone slab table rubbed, edges rounded and polished, fixed in urinal partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 6 mm nominal size) as per direction of Engineer-in-charge and finished smooth: Granite Stone of approved shade

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openings /wooden frames with rawl plugs screws etc

Providing 40x5 mm flat iron hold fast 400 mm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embedding in cement concrete block 300x100x150 mm 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size).

Providing and fixing factory made P.V.C. door frame of size 50x47 mm with a wall thickness of 5 mm, made out of extruded 5mm rigid PVC foam sheet, mitred at corners and joined with 2 Nos of 150mm long brackets of 15x15mm M.S. square tube, the vertical door frame profiles to be reinforced with 19x19mm M.S. square tube of 19 gauge, EPDM rubber gasket weather seal to be provided through out the frame. The door frame to be fixed to the wall using M.S. screws of 65/100mm size, complete as per manufacturer's specification and direction of Engineer-in- Charge.

Providing and fixing factory made panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19mm x 19mm for styles and 15x15mm for top & bottom rails. M.S. frameshall have a coat of steel primers of approved make and manufacture. M.S. frame covered with 5mm thick heat moulded PVC 'C' channel of size 30mm thickness, 70mm width out of which 50 mm shall be flat and 20mm shall be tapered in 45 degree angle on both side forming styles and 5mm thick, 95mm wide PVC sheet out of which 75mm shall be flat and 20mm shall be tapered in 45 degree on the inner side to form top and bottom rail and 115mm wide PVC sheet out of which 75mm shall be flat and 20mm shall be tapered on both sides to form lock rail. Top, bottom and lock rails shall be provided both side of the panel. 10mm (5mm x 2) thick, 20mm wide cross PVC sheet be provided as gap insert for top rail & bottom rail, paneling of 5mm thick both side PVC sheet to be fitted in the M.S. frame welded/sealed to the styles & rails with 7mm (5mm+2mm) thick x 15mm wide PVC sheet beading on inner side, and joined together with solvent cement adhesive. An additional 5mm thick PVC strip of 20mm width is to be stuck on the interior side of the 'C' Channel using PVC solvent adhesive etc. complete as per direction of Engineer-in-charge, manufacturer's specification & drawing. 30mm thick plain PVC door shutters

Providing and fixing factory made Fiberglass Reinforced plastics (F.R.P.) chajja 4 mm thick of required colour, size and design made by Resin Transfer Moulding (RTM) Machine Technology, resulting in void free compact laminate in single piece, having smooth gradual slope curvature for easy drainage of water and duly reinforced by 2 nos vertically and 1 nos horizontally 50x2 mm thick M.S. flat with 12 mm in built hole for grouting on the existing wall along with the 50 mm flanges duly inserted and sealed in the wall complete in one single piece casted monolithically, including all necessary fittings . The FRP Chajja should be manufactured using unsaturated Polyester resin as per IS: 6746, duly reinforced with fibre glass chopped strand mat (CSM) as per IS: 11551 complete with protective Gel coat U/V coating on Top for complete resistance from the extreme of temperature, weather & sunlight (Only plan area of chajjas shall be measured for making payment)

Providing and fixing fly proof stainless steel grade 304 wire gauge, to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia. 0.50 mm all complete. With 12 mm mild steel U beading

Providing and fixing cup board shutters 25 mm thick, with Pre-laminated flat pressed three layer particle board or graded wood particle board IS: 12823 marked, exterior grade (Grade lType ll), having one side decorative lamination and other side balancing lamination, including IInd class teak wood lipping of 25 mm wide x12 mm thick with necessary screws and bright finished stainless steel piano hinges, complete as per direction of the Engineer-in-Charge

Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer: Using M.S. angels 40x40x6 mm for diagonal braces

Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete: Hot finished welded type tubes

Steel work welded in built up sections/ framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works.

Providing Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete. 40 mm thick with 20 mm nominal size stone aggregate

Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) : 25 mm thick.

Providing and fixing 1st quality ceramic glazed floor tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete.

Fixing glazed/ Ceramic/ Vitrified floor tiles with cement based high polymermodified quick-set tile adhesive (Water based) conforming to IS: 15477,in average 3mm thickness

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete: Size of Tile 600x600 mm

Providing and laying Vitrified tiles in different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of approved brand & manufact-urer, in all colours and shade, in skirting, riser of steps, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately): Size of Tile 600x600 mm

Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), including filling / grouting and finishing complete as per direction of Engineer-in-charge: Size of Tile 600x600 mm

Providing and laying pressed clay tiles (as per approved pattern 20 mm nominal thickness of approved size) on roofs jointed with cement mortar 1:4 (1 cement : 4 coarse sand) mixed with 2% integral water proofing compound, laid over a bed of 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand) and finished neat complete.

Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50mm (+0.05%) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in- charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55 mm) with EPDM seal, complete upto any pitch in horizontal/vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.

Providing and fixing Gl Clip in Metal Ceiling System of 600x600 mm module which includes providing and fixing 'C' wall angle of size 20x30x20 mm made of 0.5 mm thick pre painted steel along the perimeter of the room with help of nylon sleeves and wooden screws at 300 mm center to centre, suspending the main C carrier of size 10x38x10 mm made of G.I steel 0.7 mm thick from the soffit with help of soffit cleat 37x27x25x1.6 mm, rawl plugs of size 38x12 mm and C carrier suspension clip and main carrier bracket at 1000 mm c/c. Inverted triangle shaped Spring Tee having height of 24 mm and width of 34 mm made of Gl steel 0.45 mm thick is then fixed to the main C carrier and in direction perpendicular to it at 600 mm centers with help of suspension brackets. Wherever the main C carrier and spring T have to join, C carrier and spring T connectors have to be used. All sections to be galvanized @ 120 gms/sqm (both side inclusive), fixing with clip in tiles into spring T with : GI Metal Ceiling Clip in plain Beveled edge global white color tiles of size 600x600 and 0.5 mm thick with 25 mm height, made of G I sheet having galvanizing of 100 gms/ sqm (both sides inclusive) and electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending

Providing 12 mm cement plaster of mix : 1:6 (1 cement: 4 Fine sand)

Providing 15 mm cement plaster on rough side of single or half brick wall of mix: 1:4 (1 cement: 4 Fine sand)

Providing 6 mm cement plaster of mix : 1:3 (1 cement : 3 fine sand)

Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)

Applying priming coat:With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanized iron/steel work

Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete. On steel work

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Distempering with 1st quality acrylic distemper (ready made) having VOC content less than 50 gm per ltr. of approved manufacturer and of required shade and colour complete. as per manufacturer's specification.One or more coats on old work

Wall painting with acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour One coat

Wall painting with acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour Two coat

Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre

Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade: One or more coats on old work

Finishing walls with water proofing cement paint of required shade :Old work (one or more coats @ 2.20 kg/10 sqm) complete

Finishing walls with Acrylic Smooth exterior paint of required shade : Old work (One or more coat applied @ 0.90 ltr/10 sqm).

Repairs to plaster of thickness 12mm to 20mm in patches of area 2.5 sq. meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per directions of Engineer-In-Charge. With cement mortar 1:4 (1 cement : 4 fine sand)

Raking out joints in lime or cement mortar and preparing the surface for re-pointing or replastering, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge.

Flush pointing with cement mortar 1:3 (1 cement : 3 fine sand) mixed with 2% of integral water proofing compound by weight of cement for flat tile bricks on top of mud phaska : With modular brick tiles.

Providing and fixing double scaffolding system (cuplock type) on the exterior side, upto seven story height made with 40mm dia M.S. tube 1.5m centre to centre, horizontal & vertical tubes joining with cup & lock system with M.S. tubes, M.S. tube challies, M.S. clamps and M.S. staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it there after. The scaffolding system shall be stiffened with bracings, runners, connection with the building etc wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and approval of Engineer-in-charge. The elevational area of the scaffolding shall be measured for payment purpose .The payment will be made once irrespective of duration of scaffolding. Note: - This item to be used for maintenance work judicially, necessary deduction for scaffolding in the existing item to be done.

Cleaning of terrace/loft water storage tank (inside surface area) upto 2000 litre capacity at all heights with coconut brushes, duster etc., removal of silt, rubbish from the tank and cleaning the tank with fresh water disinfecting with bleaching powder @ 0.5gm per litre capacity of tank, including marking the date of cleaning on the side of tank body with the help of stencil and paint and disposing of malba, all complete as per direction of Engineer-in-Charge. (The old date already written on tank should be removed with paint remover or black paint and if date is not written with the stencil or old date is not removed deduction will be made @ Rs. 0.10 per litre if during cleaning any GI fittings or ball cock is damaged that is to be repaired by contractor at his own cost and nothing extra will be paid on this account)

Cleaning of under ground sump, Over Head R.C.C. Tank (independent staging) including disposal of slit and rubbish, all as per direction of Engineer-in-Charge. The cleaning shall consist following opera-tions:- (i) Tank shall be emptied of water by pumping & bottom shall be cleaned of slit and other deposits. (ii) Entire surface area of the sump shall then scrubbed thoroughly with wire brush etc. and pressure washed with water. (iii) Chlorination of RCC internal surface by liquid chlorine. (iv) The treated surface shall be dried using air jetting and all loose particles shall be removal from the surface. (v) Finally the surface shall be treated with ultraviolet radiation etc. as per direction of Engineer-in-Charge.

Cleaning of chocked sewer line by diesel running vehicle mounting hydraulic operated high pressure suction cum jetting sewer cleaning machine fitted with pump having 4000 litres suction capacity and 6000 litres water jetting tank capacity including skilled operator, supervising engineer etc. for cleaning and partial desilting of manholes and dechocking of sewer lines. Dechocking and flushing of sewer line from one manhole to another by high pressure jetting system of 2200 PSI for sewer line from 150 mm dia upto 300 mm

Dismantling W.C. Pan of all sizes including disposal of dismantled materials i/c malba all complete as per directions of Engineer-in-Charge.

Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge: Nominal concrete 1:4:8 or leaner mix (i/c equivalent design mix)

Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. In cement mortar

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. For thickness of tiles 10 mm to 25 mm

Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.

Disposal of building rubbish/malba/similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50m initial lead, for all leads including all lifts involved.

Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-charge).

Taking out existing CC interlocking paver blocks from footpath/central verge, including removal of rubbish etc., disposal of unserviceable material to the dumping ground, for which payment shall be made separately and stacking of serviceable material within 50 metre lead as per direction of Engineer-in-Charge.

Providing and laying 60mm thick faciory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of Engineer-in-charge.

Laying old cement cocrete interlocking paver blocks of any design/ shape laid in required line, level, curvature, colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge. (Old CC paver blocks shall be supplied by the department free of cost).

Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: White Vitreous china Orissa pattern W.C. pan of size 580x440mm with integral type foot rests

Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: W.C. pan with ISI marked white solid plastic seat and lid

Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design: 100x100 mm size P type With common burnt clay F.P.S. (non modular) bricks of class designation 7.5

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : For fixed portion Powder coated aluminium (minimum thickness of powder coating 50 micron)

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) Powder coated aluminium (minimum thickness of powder coating 50 micron)

Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS:12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of Engineer-in-charge. Pre-laminated particle board with decorative lamination on one side and balancing lamination on other side

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm)

Filling the gap in between aluminium frame & adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete.

Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : (a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/sqm. This layer will be allowed to air cure for 4 hours. (b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours allowed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry.

Chipping of unsound/weak concrete material from slabs, beams, columns etc. with manual Chisel and/ or by standard power driven percussion type or of approved make including tapering of all edges, making square shoulders of cavities including cleaning the exposed concrete surface and reinforcement with wire brushes etc. and disposal of debris for all lead and lifts all complete as per direction of Engineer-In-Charge 50 mm average thickness

Cleaning of reinforcement from rust from the reinforcing bars to give it a total rust free steel surface by using alkaline chemical rust remover of approved make with paint brush and removing loose particles after 24 hours of its application with wire brush and thoroughly washing with water and allowing it to dry, all complete as per direction of Engineer-In-Charge. Bars upto 12 mm diameter

Drilling suitable holes in reinforced or plain cement concrete with power driven drill machine to a minimum depth of 100 mm upto 200 mm in RCC beams, lintels, columns and slabs to introduce steel bars for sunshades/ balconies including fixing the steel bars in position using epoxy resin anchor grout of approved make but excluding the cost of reinforcement, all complete as per direction of Engineer-In-Charge. Upto and including 12 mm dia.

Providing, mixing and applying bonding coat of approved adhesive on chipped portion of RCC as per specifications and direction of Engineer-In-charge complete in all respect.SBR Polymer (@10% of cement weight) modified cementitious bond coat @ 2.2 kg cement per sqm of surface area mixed with specified proportion of approved polymer

Providing, mixing and applying SBR polymer (of approved make) modified Cement mortar in proportion of 1:4 (1 cement: 4 graded coarse sand with polymer minimum 2% by wt. of cement used) as per specifications and directions of Engineer-in-charge. Note: Measurement and payment: The pre-measurement of thickness shall be done just after the surface preparation is completed and Payment under this item shall be made only after proper wet curing has been done and surface has been satisfactorily evaluated by sounding / tapping with a blunt metal instrument and/or the 75 mm size cube crushing strength at the end of 28 days to be not less than 30 N/Sqmm2). 25 mm average thickness in 2 layers.

Providing and injecting approved grout in proportion recommended by the manufacturer into cracks/honey-comb area of concrete/masonry by suitable gun/pump at required pressure including cutting of nipples after curing etc. complete as per directions of Engineer-in-Charge. (The payment shall be made on the basis of actual weight of approved grout injected.) Epoxy injection grout in concrete/RCC work of approved make

Water proofing treatment of RCC sunshade with Zycosil/equivalent water proofing Solution (1 litre of Zycosil/equivalent & 20 litres of water stirred first & 2 litres of Zycoprime/equivalent added and stirred (total 23 litres)) till it meets the saturation level and testing as per RILEM or by water drops test in which water drops do not absorb but drops remain or rolls.

Supplying of ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters 30 mm thick(fixing by engaged labour)

Supplying of wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately). Second class teak wood (fixing by engaged labour)

Supply of polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement (fixing by engaged labour)

Welding by gas plant or electric plant including transportation of plant at site etc. complete

Supply and fixing of SS 304 grade grating square 125mm

Supply and fixing of CP brass waste coupling 32mm dia

Supply and fixing of CP brass flange 32mm dia

Supply and fixing of CP brass Urinal spreader 15mm dia

Supply of Pad lock 32mm brass

Supply and fixing of Ball valve (20mm) (Polypropylene with teflan seating)

Supply and fixing of Ball valve (25mm) (Polypropylene with teflan seating)

Supply and fixing of Ball valve (32mm) (Polypropylene with teflan seating)

Supply and fixing of Ball valve (40mm) (Polypropylene with teflan seating)

Supply and fixing of Ball valve (50mm) (Polypropylene with teflan seating)

Supply and fixing of Ball valve (63.5mm) (Polypropylene with teflan seating)

Supply and fixing of CP brass Two way bib cock

Supply and fixing of 15mm spindle for Tap

Supply and fixing of 15mm spindle for Wall Mixer

Supply and fixing PVC Lids for water storage tanks

Supply of Jaquar Metropole Flush Valve Regular 40mm Size (Concealed Body) FLV-CHR-1093N with Exposed Shut off Provision & Round Flange

Supply of Jaquar Internal Parts (FLV-CHR-1085/1095) for Metropole Flush Valve- 1095/1095 (32MM)

Jaquar Push Button 40mm for Metropole Flush Valve replacement Spare Parts as directed by Engineer-in-charge.

Supply of Jaquar Metropole Brass Round Flange Chrome Plated as directed by Engineer-in-Charge.

Providing and fixing Jaquar brass bib cock of 15 mm nominal bore

Supplying and fixing of 18 inch SS Grab bar

Manhole Cover SFRC 300mm x 300X 50mm

Cleaning of septic tank, manholes, inlet chambers and connected drainage by removing sludge, dirt and waste water, etc. including removing and refixing the cover slab and emptying the tank by truck mounted mechanically operated sucking units with a capacity of 6KL and disposing the sludge and waste water to the dumping yard approved by concern local body.

Cleaning of Aluminium Composite(ALCO) Panelling and Structural Glazing upto any height by using appropriate neutral detergents, rinsed with clean water and wiped with a squeegee including provision of necessary scaffolfing and safety equipments as per the direction of Engineer in Charge.

Cutting and removing the overhanging branches of trees at any height leaning dangerously over the building including stacking serviceable materials in convenient places and disposing the unserviceable materials etc as directed by the Engineer in charge.Branches up to 30 cm girth.

Cutting and removing the overhanging branches of trees at any height leaning dangerously over the building including stacking serviceable materials in convenient places and disposing the unserviceable materials etc as directed by the Engineer in charge.Branches from 31 to 60 m girth.

Cutting and removing the overhanging branches of trees at any height leaning dangerously over the building including stacking serviceable materials in convenient places and disposing the unserviceable materials etc as directed by the Engineer in charge.Branches beyond 60 cm girth.

Supplying and filling AAC rubble and unslaked lime in ratio of 1:2 (1 part unslaked lime and 2 parts of Autoclaved Aerated Cement (AAC) rubble to the required slope in sunken portions.

Providing and laying polycarbonate sheet of 10mm thick including removal of the existing demaged roofing , rate including cost of all material and labour etc complete

Cleaning of storm water drain the deposited waste material, dry leaves, plastic material, etc and de-silting the drains complete as directed by Engineer Incharge.

Providing and fixing of frosted film on glass door, window, partition frame including cutting, fixing in line and level, cleaning of glass at all heights, leads and lifts, tools and tackels all complete make approved brand as directed by engineer in charge. (Approval of film sample is required from Engineer in Charge before execution)

Providing and fixing sun control film on glass door, window, partition frame including cutting, fixing in line and level, cleaning of glass at all heights, leads and lifts, tools and tackels all complete as directed by engineer in charge. Make of film Garware or equivalent (Approval of film sample is required from Engineer in Charge before execution)

Attending leakage for Toilet above by injecting cement and sealing the joints of tiles joint with wall and flow etc with silicon-based water proofing compound etc complete as directed by the Engineer in charge (Payment shall be made only after successful stopping of leakage): Plan area of Toilet will be measured for the purpose of payment.

Clearing the grass and wild vegetation by using bush cutting machine (Four stroke) and removing the debris outside the periphery of the area cleared by engaging skilled operator with machine and miscellaneous fittings such as rope cutter, triangular blade, circular blade, fuel, Oil etc as required and as directed by engineer-in- charge.

Credit for dismantled materials ( payment to be made to ESIC inliue of dismantled materials available while replacing with new fittings):PVC, CPVC, UPVC

Credit for dismantled materials ( payment to be made to ESIC inliue of dismantled materials available while replacing with new fittings:Steel

Credit for dismantled materials ( payment to be made to ESIC inliue of dismantled materials available while replacing with new fittings):Aluminium

Credit for dismantled materials ( payment to be made to ESIC inliue of dismantled materials available while replacing with new fittings):Copper

Credit for dismantled materials ( payment to be made to ESIC inliue of dismantled materials available while replacing with new fittings:Staineless Steel

Credit for dismantled materials ( payment to be made to ESIC inliue of dismantled materials available while replacing with new fittings):Tin

Credit for dismantled materials ( payment to be made to ESIC inliue of dismantled materials available while replacing with new fittings):Fire Wood

Engaging skilled carpenter/fabricator with necessary tools and miscellaneous minor fittings such as drills machine etc for attending the day to day complaints , minor repair works, fixing / replacing the damaged fittings such as door & windows hinges/tower bolt/sliding bolt, Replacing/repair damaged wooden/steel/PVC doors/false ceiling and windows to the Hospital buildings and staff quarters including minor repairing and maintenance of doors and periodic checking of proper closing/opening of doors and windows, etc. all works connected with fising of toilet doors fittings, etc of ESIC Establishments as directed by Engineer in Charge:[General shift](2 no x 12 months).

Engaging skilled Plumber with necessary tools and miscellaneous minor fittings such as Telxon tape, washers, jumper valves etc for attending the day to day complaints , minor repair works, fixing / replacing the damaged fittings such as taps/ wash basins, EWC/IWC, flushing cisterns, Replacing damaged PVC/GI pipe lines, PVC rain water pipes and fittings, pumping water to the Dispensary buildings and staff quarters including minor repairing and maintenance of Pumps and periodic chlorination of open wells etc. all works connected with internal/ external water supply lines, water supply fittings/ fixtures, sanitary installations, OHT etc of ESIC Establishments.(General/Night shift)(4 no x 12 months).

Engaging skilled Mason with necessary tools and miscellaneous minor fittings such as trowel, water level, plumb rule etc for attending the day to day complaints , minor repair works such as repair to plaster to the Hospital buildings and staff quarters including minor repairing and maintenance of chajjas and removal of damaged of concrete and plasters etc. all works connected with masonry etc of ESIC Establishments.[General Shift](1 no x 12 months).

Engaging Gardener for gardening, pruning of branches in trees and any other works with appropriate tools in ESIC Establishments as directed by Engineer in Charge(General shift)(1 no x 12 months).

Engaging sewer man for attending complaints on sewer/drainage lines, removing blockage in Drainage/ sewer lines, Gully traps, Manholes and Septic tanks/Cleaning of terraces up to any height with appropriate tools etc in the campuses of ESIC Establishments.[General Shift](2 no x 12 months).

Engaging Helper(Technician) for assisting plumber in attending the day to day complaints of all sorts of Internal water supply/External water supply/sanitary installations /assisting carpenter in repair works/assisting manson for repair cleaning open area in campus/ assisting sewer man in clearing blockages/ clearing silting storm water drains including removing and replacing RCC covers in ESIC Establishments.(6 no x 12 months).