COMPREHENSIVE MAINT INCL ATTENDING DAY TO DAY COMPLAINTS, REPAIR/ REPLACEMENT OF B/R WORKS, TANK CLEANING AND CERTAIN OTHER MISC WORK TO VARIOUS BLDG (EXCLUDING PERIMETER AND DEPOT AREA) AND ROOF TREATMENT INCLUDING RELATED B/R WORKS IN BATHINDA

Amount

Taking down chowkats or frames with shutters (without taking off shutters from the frame) not exc 1.5 Sqm each and removing from site complete all as specified.

S & F factory made solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube all as specified in Preamble 8B.3.1 of SSR Part -II (2010) and all as shown on drawing of SSR Part-II (2010).

S & F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and gap insert for top rail and bottom rail; panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and jointed together with solvent cement all as per instruction and drawing shown for item No 8080 of SSR Part II.

S & F aluminium anodised butt hinges, extruded aluminium alloy with aluminium hinges pin, anodised and fixed type B-21, size of hinges 100mm.

S & F 150 mm long aluminium anodised, barrel tower bolts of extruded section. (ISI Marked) complete all as specified.

S & F 125 mm long aluminium anodised handles, cast type (ISI Marked) complete all as specified.

Taking down chowkats or frames with shutters (without taking off shutters from the frame) exc 1.5 sqm but not exc 4 Sqm each and removing from site including cutting holes for removal of hold fast complete.

S&F factory made pressed steel frames for door with one or more rebates including necessary fixing lugs, lock strike plate, hinges etc, complete, all as specified of frame size 125 mm x 60mm & thickness of MS sheet shall not be less than 1.25 mm including making holes for fixing hold fast etc and making good the wall with plaster in cement mortar (1:6) complete.

S & F factory made pressed steel frames for door with one or more rebates including necessary fixing lugs, lock strike plate, hinges etc, compete, all as specified of frame size 105 mm x 60mm & thickness of MS sheet shall not be less than 1.25 mm including making holes for fixing hold fast etc and making good the wall with plaster in cement mortar (1:6) complete.

Supply only mild steel butt hinges, 100 mm size , medium weight, cold rolled and fixed with screws/ welding to wooded / steel frames or chowkats, complete all as specified.

M & L for PCC (1:3:6) type C-1 using 20 mm graded crushed stone aggregate as in filling back of pressed steel door frames/ chowkats and for fixing hold fasts etc complete all as specified.

Taking down shutters of any description exceeding 1 Sqm and not exceeding 2 Sqm each and re-fixing in the same opening including easing and adjusting including renewal of unserviceable screws etc complete.

Taking down shutters of any description exceeding 1 Sqm each but not exceeding 2 Sqm and removing from site complete.

S & F 35mm thick factory made panelled shutter (two panel) plain framed with lock rail and panel of 12mm thick veneered particle board with commercial veneering on both faces conforming to IS-3097 exterior grade kiln seasoned and chemically pressure treated of second class hard wood rails and styles and the size of rail and style as per IS-1003 (Part I) complete all as specified.

S & F factory made glazed and skeleton shutters 35mm thick using second class hard wood open rebated and prepared to receive glass, gauge etc (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc; sizes of members of shutters as specified in SSR Part I, Section 8, Clause 8.24(a); all as specified complete.

M & L for factory made flush shutter 25mm thick solid core construction with block board core and plywood face panels commercial type on both sides complete.

S&F Continuous (piano) hinges, mild steel, bright finish or electro galvanised of 30 mm width of flap (when open) complete all as specified.

M & L for painting to new wood and wood based surfaces of any description, over 10 cm in width or girth, not otherwise described with two coats of synthetic enamel paint over a coat of pink primer including preparation of surfaces complete all as specified.

S & F galvanised steel wire cloth, 0.56 mm nominal dia of wire & average width of aperture 1.18mm and fixed with tinned tacked or galvanized steel wire staples complete.

S & F in repairs mild steel galvanized wire cloth, 0.56 mm nominal dia of wire & average width of aperture 1.18mm and fixed with galvanized steel wire staples complete.

S & F 300 mm long MS ordinary rat tail rod pattern springs for doors including roller and roller plate complete.

S & F mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed, length of bolt 300 mm complete all as specified.

S&F mild steel barrel tower bolts, stove enamelled black, with bright bolt and fixed, length of bolt 200mm.(ISI Marked) complete all as specified.

S & F 150mm Mild Steel pressed handles, oval type stove enameled black with bright finished . (ISI Marked) complete all as specified.

S & F factory made steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded including one shop coat primer complete all as specified..

S & F factory made steel windows with side hung shutters including box type hinges with steel handle, and steel peg stay, complete without glazing bars, dovetailed or welded including one shop coat primer complete all as specified..

S & F steel windows for industrial buildings, fixing type, with glazing bars, including taking down old windows complete all as specified..

S & F MS framed work such as grills, gratings, etc., with end of bars shouldered and / or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders framed balusters; walk ways; railings; frame work of water tanks and similar work conforming to Fe 290 Gde E-165 complete all as specified.

S & F sheet glass, 4 mm thick ordinary quality and glazing with oil putty in square not exceeding 0.5 Sqm in each pane fixed with oil putty or wooden beads complete all as specified.

S & F figured glass, pin head type 4 mm thick glazing with oil putty in square not exceeding 0.5 Sqm in each pane fixed with oil putty or wooden beads complete all as specified.

Hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins / spring clips of size not exceeding 0.5 Sqm each pane complete.

M & L for preparation of new steel surfaces of any description, over 10 cm in width or girth, and applying two coat of synthetic enamel paint over one coat of red oxide or zinc chrome compete all as specified.

Dismantling floor, hearth or wall tiling/ terrazzo finish etc including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified.

M&L for non skid ceramic coloured tiles, 7 to 8 mm thick (square / rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile with including 15 mm thick Screed bed or bedding layer in CM (1:4) complete all as specified. Note:- Only course sand shall be used in screed bed.

S & F glazed ceramic coloured tiles 450 x 350mm, / 600mm x 300mm, 7 to 8mm thick in verticle surfaces such as dado / skirting, set and jointed in neat cement slurry and pointed in white or coloured cement pigmented to the match the shade of tiles laid over and including 10 mm thick rendering in cement mortar (1:4) as backing coat and finish the surface rough to receive the tile complete all as specified.

M & L for non skid coloured ceramic tiles of size minimum 600mm x 600mm, 10 mm thick (square/rectangular), in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile with including 15 mm thick Screed bed or bedding layer in CM (1:6) complete all as specified. Note: Only course sand shall be used in screed bed.

All as per ser item No. 36 here-in-before but on vertical surfaces as in skirtings etc. on 10 mm thick back coat in CM 1:4 complete.

M&L for rubber moulded chequered cement concrete tiles with grey cement and pigments, 25cm x 25cm x 22-25mm thick, coloured & design as approved, set, jointed and pointed in neat cement slurry as in floors etc; laid over & including 15mm thick screed in CM (1:6), complete all as specified.

Demolition of PCC (unreinforced) including tiles of any description etc not exc 15cm thickness (below or above ground level) complete all as specified.

M&L for marble work (udaipur green) 18 to 20 mm thick (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of marble and rounding to the edge of stone slabs on edges complete all as specified.

M & L for 75 mm thick PCC (1:3:6) type C-2 using 40mm graded crushed stone aggregate as floors, plinth protection, path etc and finishing the surface even and smooth without using extra cement complete all as specified.

Roughening surfaces of old concrete floor by picking , sweeping , clean and washing down with water to remove dust etc and brushing with neat cement slurry @ 3.0 Kg of cement per Sqm all as directed

M & L for machine cut kota stone slab flooring minimum size 450 mm x 450 mm, 18 to 20 mm thick over 15 mm thick cement screed base in CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing complete all as specified.

M & L for machine cut kota stone slab minimum size 450 mm x 100 mm, 18 to 20 mm thick as in riser of steps , skirting , dado and pillar, laid and jointed in neat cement slurry and pointed in white cement paste pigment to match the shade of the tiles laid over and including M & L for 15mm thick rendering in cement mortar (1:4) and finish the surface rough to receive the tile complete all as specified.

S&F in repairs bib taps, cast copper alloy with crutch or butterfly handle, fancy type, chromium plated, screwed down, screwed for iron pipe or for brass ferrule for 15 mm bore dia of pipe.

S&F in repairs pillar taps, cast copper alloy, with capstan heads, fancy type, quarter turn, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe for 15mm bore dia of pipe.

S&F in repairs angle valves , cast copper alloy, fancy type, chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for brass ferrule for 15 mm bore dia of pipe complete all as specified.

S&F in reapirs stop valves, cast copper alloy, fancy type, chromium plated with long shank and cup (concealed type) screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for brass ferrule for 15 mm bore dia of pipe complete all as specified.

S & F in repair PVC connections 15 mm bore, 450 mm length, heavy duty, with PTMT nuts complete all as specified.

S & F in repair brass chromium plated shower rose 125 mm size with or without swivel joints incl fixing to steel pipe or union complete all as specified and as directed.

S & F in repairs brass chromium plated tubular towel rail, 20mm dia, D type, 60cm long including end brackets complete all as specified.

S&F in repairs stainless steel, chromium plated, decorative type, soap dish holder fixed to wall with brass screws including plastic gutties complete all as specified.

S&F as in repairs sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm including 40mm waste fittings, brass chromium plated with long screwed shanks and flynuts, flange end bedded in red lead cement complete all as specified.

S & F in repairs 32mm dia fancy type PVC coated in wooden finish on MS pipe coloured curtain rod with brackets and knobs at both ends with 6 Nos rings in 1 mtr length as per site requirement including taking down old existing PVC conduit pipes with accessories complete all as specified. (Note :- Brackets and Knob is deemed to be included in the quoted rate. Nothing extra shall be paid on this account )

Taking up or down 15mm bore galvanised iron tubing /PL-AL-PE pipes and connections, including cleaning for refixing or removal complete all as specified.

Taking up or down 20mm bore galvanised iron tubing /PL-AL-PE pipes and connections, including cleaning for refixing or removal complete all as specified.

S & F GI tubing medium grade with all fittings and fixed to walls & ceiling or laid in floors, bore of pipe 15 mm complete all as specified

S & F GI tubing medium grade with all fittings and fixed to walls & ceiling or laid in floors, bore of pipe 20 mm complete all as specified

Taking down AC eaves gutters and rain water pipes (any size or pattern ), including all fittings, heads, shoes, bends, swan necks, etc, complete all as specified.

S&F PVC (SWR) 110mm bore pipes single socketed, ISI marked, in any length with rubber ring joints, fixed to walls with MS clamps complete all as specified.

S&F PVC (SWR) 110mm bore fittings such as bends, tee, shoe etc fixed to PVC pipes complete all as specified.

S & F in repairs vitreous china squatting pan, 'Orissa' pattern, size 580mm x 440mm x 260 mm , white, with integral foot rests (excluding flushing cistern and flush pipe ) including connection to trap, and to flushing pipe, anti-syphonage pipe, etc. including making good to floor and including trap set, in and including lime concrete complete all as specified.

S & F in repairs PVC valve less, syphonic action type, flushing cistern, 10 litres capacity, low level, white, with inlet, ball valve, float and handle including brackets and PVC flushing pipe 32mm dia complete.

S & F in repairs vitreous china wash hand basin, white, flat back, fency type of size 550mm x 400mm , excluding waste, chain and plug and porcelain stopper but including 32 mm dia waste coupling fancy type chromium plated ,and PVC waste pipe of 32 mm dia and fixed of waste fitting and union all as directed complete, .

Dismantling and disconnecting of existing of 100mm internal dia cast iron soil waste & vent pipe or reinforced concrete drain pipes fixed to wall or laid in trenches incl all fittings, jointed in cement mortar and taking out of trenches, if required.

Dismantling and disconnecting of existing of 75mm internal dia cast iron soil waste & vent pipe or reinforced concrete drain pipes fixed to wall or laid in trenches incl all fittings, jointed in cement mortar and taking out of trenches, if required.

Supply and Fixing cast iron sand soil waste and vent pipe 100mm bore with or without ears fixed with chemical cement joints laid in trenches/floors or fixed in walls complete all as specified.

Supply and Fixing cast iron sand soil waste and vent pipe 75mm bore with or without ears fixed with chemical cement joints laid in trenches/floors or fixed in walls complete all as specified.

S & F in repairs 100 mm bore cast iron bends (any radius), diminishing pieces or tapers (large bore measured) with heel rest including oval access door complete all as specified.

S & F in repairs 75 mm bore cast iron bends (any radius), diminishing pieces or tapers (large bore measured) with heel rest including oval access door complete all as specified.

Taking down cement or cement lime plaster of any description on brick or stone walls, etc. including racking out joints, hacking for key, scrubbing down with water etc complete all as specified.

M & L for rendering 15 mm thick in cement mortar (1:4) on fair faces of brick work or concrete surfaces and finishing even & smooth but without using extra cemnent & with using integral water proofing compound complete all as specified.

Supply only integral water proofing compound, ISI marked.

M & L for rendering 15 mm thick in cement mortar (1:6) on other then fair faces of brick work or concrete surfaces and finishing even & smooth without using extra cemenent complete all as specified.

M & L for rendering 5 mm thick in cement mortar (1:3) on ceiling and finishing the surface even & smooth without using extra cemenent complete all as specified.

M & L for preparation of newly plastered surfaces of walls and applying two coats of oil bound distemper over a coat of suitable primer complete all as specified.

M&L for preparation of newly plastered or unplastered surface and applying three coats of white wash on ceilings complete all as specified.

M&L for applying two coats of cement base paint over a coat of primer on newly plasterered wall surfaces including cornices and pillers etc, as per manufacturer's specification's & instructions including preparation of surface complete all as specified.

M&L for applying one coat of cement base paint on old plasterered wall surfaces including cornices and pillers etc, as per manufacturer's specification's & instructions including preparation of surface complete all as specified.

Demolition of brick work for stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, complete all as specified.

M&L for brick work using sub class ‘B’ old size bricks, straight or curved on plan exceeding 6m mean radius, built in CM (1:6) but except bricks ( old serviceable bricks to be used ) complete all as specified. Note :- The rate includes for cleaning of old bricks.

Cleaning and removing all scale and dirt etc from tanks of capacity exceeding 250 litres and not exceeding 500 litres and from mouth of circulating pipes etc. by dewatering the tank by any means and cleaning the complete inner surface by rubber/nylon scraper to remove sludge / silt and washing with bleaching powder solution and then clear water and writing the date of cleaning etc with white paint all as directed.

BLANK

S&F rotational three layers water storage tanks 1000 litres capacity HDPE water storage tanks poly proof, white in colour rotational moulded polyethlene (cylindrical vertical with closed top ), hoisted and fixed in position including supply and fixing of suitable size inlet/ outlet arrangement & other accessories including dismantling old water tank complete all as specified.

BLANK

S&F rotational three layers water storage tanks 500 litres capacity HDPE water storage tanks polyproof, white in colour rotational moulded polyethlene (cylindrical vertical with closed top ), hoisted and fixed in position including supply and fixing of suitable size inlet/ outlet arrangement & other accessories including dismantling old water tank complete all as specified.

S & F in repairs ball valves high pressure of PTMT with epoxy coated Aluminium rod and high density plastic ball screwed for iron pipe of size 20 mm bore (minimum weight 210 gram) complete all as specified.

S & F ball valves high pressure of PTMT with epoxy coated Aluminium rod and high density plastic ball screwed for iron pipe of size 20 mm bore (minimum weight 210 gram) complete all as specified.

S & F in repairs Gun metal globe or Gate valve with iron wheel head , screwed both ends for iron pipe or for unions for 15 mm bore dia of pipe

S & F in repairs Gun metal globe or Gate valve with iron wheel head , screwed both ends for iron pipe or for unions for 20 mm bore dia of pipe

Dismantling wall and ceiling boards (fiber, pulp, insulation, etc) or insulation boards / slabs / blankets, any thickness, including cover fillets and removing from site complete all as specified.

S & F 595 x 595 x 6 mm thick Gypsum board laminated with PVC sheet as in false ceiling including supply and fixing 'Tee" grid frame work made of GI sheet 0.30 mm thick, bottom portion painted with cellular nitro painting, consisting angle cleats of size 25 mm wide 1.6 mm thick with flag fixed to RCC ceiling with dash fastener or wrapping the suspending wire around the existing wooden/ steel purlin / rafter for suspending grid frame work of size 600 x600mm suspended with 02 Nos 1.60 mm dia GI wire @ 600 mm C/C on main Tee and fixed to T-grid as per manufacturer direction. The section consisting of main Tee 37mm x 24 mm x 0.60 mm thick, cross runner tee 37mm x24mm x 0.60 mm and perimeter angle 24mmx 24mm x 0.50 mm thick shall be fixed to wall with GI screw of 40 mm long @ 450 mm C/C along the perimeter of wall all s per manufacturer's instruction complete all as specified

S&F solid PVC wall lining consisting of 5 mm thick wood grain printed PVC sheet inclusive of solvent cement and fixing at site on PVC frame including 'L' type decorative PVC beading of size 10mm x 10 mm with wood moulding design on edges & top etc as per specification all as per specifications .

S&F 5 mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC frame all as per specifications and drawings in SSR Part -II (2010).

BLANK

S&F Hollow PVC wall lining consisting of 5 mm thick wood grain printed PVC sheet inclusive of solvent cement and fixing at site all as per specifications .

S & F factory made anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified.

S&F factory made aluminium door shutters powder coating of any colour (thickness of powder coating not less than 50 micron), aluminium sections weighing not less than 0.55 kg/metre including necessary joining cleats, glazing clips, rubber neoprene packing, 03 Nos aluminium butt hinges 100 mm size, 02 Nos aluminium tower bolts of 150mm size in each door, anodised aluminium snap beading, screws etc complete all as specified. Note:- Sheet glass will be measured and paid separately under relevant items.

S & F mortice lock, vertical type, brass, size 100mm, 4 levers complete all as specified.

S & F door closer hydraulically regulated, designation No 1, universal type, aluminium (extruded section) body, suitable for door shutters of 700 mm in width and of weight not more than 35 kg and fixed complete all as specified.

Dismantling of asbestos cement (corrugated, semi corrugated, etc) sheets in roof coverings complete all as specified.

Dismantling framed timber scantlings 40 sq cm and over in section in any position complete all as specified.

S & F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour as approved, having tensile strength of 550 Mpa as in roof covering /cladding to wall, fixed with self tapping screws complete all as specified.

S & F pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colouras approved, having tensile strength of 550 Mpa as in roof covering /cladding to wall, fixed with self tapping screws complete all as specified.

S & F MS rolled mild steel for roof trusses (framed ), trussed, purlins, crane gantries, rails and fastenings and heavy brackets framing (beam, tee, angle, channel or flat sections) including distance pieces, cleats etc conforming to Fe -410-W Gde E-250 quality A including one shop coat of zinc chromate primer paint before fixing in position complete all as specified.

S & F for rolled mild steel plates ( plain or chequered), square cut or notched ( ordinary or counter sunk) forming holes etc of conforming to Fe -410-S complete all as specified.

S & F mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, length of bolt exc 22.5 cm but not exc 30 cm, dia of neck 16 to 20mm.

Dismantling old fiber glass reinforced translucent, plain sheets in roof covering complete all as specified.

S&F 2mm thick fiber glass reinforced translucent plain sheeting with 100 mm side and end lap fixed with 'L' or 'J' type bolts including necessary bitumen washer complete all as specified.

M & L for PCC (1:2:4) type B1 using 20 mm graded stone aggregate as in bed block for hold fast complete all as specified.

M & L for greasing and oiling for rolling shutter of any type and size to free moving/ opening complete all as specified.

S&F factory made aluminium partition walls powder coating of any colour (thickness of powder coating not less than 50 micron) ( miximum size of panels 1.20 x 1.20 mtr) , fixed type without sash bar, aluminium sections weighing not less than 0.55 kg/metre including necessary joining cleats, glazing clips, rubber neoprene packing, anodised aluminium snap beading, screws etc complete all as specified.

M & L for prelaminated particle board, 12mm thick, interior grade, prelaminated both side with decorative choice lamination, fixed in aluminium partition complete all as specified.

Demolition of PCC (unreinforced) of any description and in any position not otherwise specifically provided for and removing the debris upto a distance exceeding 1 km but not exceeding 2 km etc complete all as specified.

Complete removal of old roof treatment from brick/ concrete surfaces including removal of grass roots, hedges/ plant roots complete all as specified.

M&L for cutting grooves in brick wall, 75mm wide and 65mm deep and shaping horizontal face of groove and filled ( after inserting of felt) with cement mortar (1:3) complete all as specified.

M&L for 15 mm thick screed bed or bedding layer in cement mortar (1:3) on roof surfaces parapet or vertical beam surface (horizontal or vertical) finishing the surfaces even and fair complete all as specified. (Note :- Course sand (Toka sand) shall only be used in screed bed/plastering.)

M & L for PCC (1:2:4) type B-1 using 20 mm graded stone aggregate as in roof kerb rounded or chamfered on edge etc. and finishing even and smooth complete all as specified.

M & L applying roof treatment over finished and dried surfaces of RCC slab of cold bituminous primer @ 0.30 ltr/sqm and laid APP modified water proofing membrane with non polyester reinforcement of any make 3 mm thick and minimum weight @ 3.5 Kg/ sqm laid with gas torch application and pasted on roof surfaces with roller and apply a coat of bitumen aluminium paint @ 0.10 ltr/ Sqm on top of treated surfaces of roof including sides lap, over laps shall be provided not less than 10 cm and jointed seal with torch a per manufacturer's instructions, specification and as per particular specification or as directed

Dismantling / taking down 15 mm dia bib cock/ stop cock/angle cock of any pattern or of any type and re-fixing the same after minor repairs such as replacement of washers etc or re-fixing old serviceable bib cocks/ stop cocks any pattern (any major parts such as jumpers brass/ spindles/ caps etc shall be measured as supply only and paid for accordingly)

Supply only jumper brass with rubber or leather washer for 15 mm dia Bib cock/ stop cock brass complete all as specified and directed.

Supply only spindle brass for 15 mm dia CP Bib cock/ pillar cock/ concealed cock of any pattern complete all as specified and directed.

Supply only capstan head/ cap of CP bib tap/ stop cock brass for 15 mm dia complete all as specified and directed.

S&F in repairs bib cock PTMT standard 15 mm dia of any colour high pressure screwed down for iron pipe & fixed ( male or female as required ) complete all as specified.

S&F in repairs PVC Knob/ Handle ( as per sample) for 10 Ltr capacity low level flushing cistern complete all as specified.

S&F in repairs PVC syphon kit ( as per sample) for 10 Ltr capacity low level flushing cistern complete all as specified.

Fixing only low level flushing cistern any capacity after carrying out minor repairs such as stopping of leakage etc complete all as specified.

S&F in repairs Jet spray, CP , brass body with wall hook and 1 mtr SS pipe complete all as specified.

S&F in repairs tank nipple of suitable size at required on ground complete all as specified.

S&F in repairs PVC waste pipe with socket suitable for connection to waster fittings of 32/40 mm dia and of length minimum 75 cm complete all as specified.

S&F 32/40 mm dia waste fittings, brass, chromium plated for glazed ware sinks, basins, etc with long screwed shanks and fly nuts, flange end bedded in red lead cement complete all as specified.

S&F 40/50 mm dia waste fittings, brass, chromium plated for glazed ware sinks, basins, etc with long screwed shanks and fly nuts, flange end bedded in red lead cement complete all as specified.

BLANK

S&F in repairs toilet paper holder recessed type stainless steel complete all as specified.

S&F in repairs flush pipe of polyethene of low or high density or PVC 32 mm dia, for low level cistern and fixed complete all as specified

S&F in repairs 32 mm bore brass chromium plated bottle traps for wash basins with inlet and out let screwed for pipe or connections including necessary packing, union and cap all as specified

S&F in repairs CP grating (with or without waste hole), 125/150 mm size, fixed on floor/nahani traps etc complete all as specified.

S&F in repairs plastic water closet seat, white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified.

S&F in repair covers for PVC overhead water tanks of any capacity (as per sample) complete all as specified and directed.

S&F in repairs mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed, length of bolt 250mm.

S & F in repairs 200 mm long aluminium anodised, barrel tower bolts of extruded section. (ISI Marked) complete all as specified.

S & F in repairs aluminium handle, fabricated type size 125 mm anodised and fixed complete all as specified.

S & F in repairs for MS tower bolt 200 mm long stove enamelld black with bright bolt complete all as specified.

S & F in repairs for MS pressed handle, oval type 150 mm long stove enamelld black complete all as specified.

S&F in repairs floor door stopper 140 mm size of aluminium alloy body and tounge, anodised with hard drawn steel spring complete all as specified and directed.

S&F in repairs 100 mm size Hasp and staple, safety type, aluminium anodised with MS hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed.

S & F in repairs MS handle suitable for steel windows/ ventilators complete all as specified.

S & F in repairs MS peg stay suitable for steel windows/ ventilators complete all as specified.

Dismantling carefully cement concrete in floor, etc around floor traps or any other concealed fittings, ( replacing floor traps/fittings if required shall be paid at supplied only rate separately), sealing joints with solvent cement or other suitable materials and making joint leak proof and making good surfaces with PCC (1:2:4) or CM (1:3) (repair/replacement of tiles in floor shall be measured and paid separately), complete all as specified

Supply only floor trap 75 mm dia with grating including jointing to waste pipe complete all as specified.

Renewing non skid /glazed ceramic tiles in patches in floor or walls, area n. exc 5 sqm including cutting out broken tiles carefully, preparing beds and laying or setting, jointing & pointing new tiles complete all as specified (new tiles shall be paid at supply only rate separately).

Supply only non skid ceramic coloured tiles 300 x300 x7to 8 mm thick.

M & L for brick work using sub class 'B' old size bricks, straight or curved on plan exceeding 6m mean radius, built in CM (1:6) all as specified and directed.

SHARDA ENTERPRIES