Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹42.6 LAccepted-AOC A 47D RAM DUTT ENCLAVE UTTAM NAGAR NEW DELHI 110059 | WEST | DELHI | 110059 | L1 | Accepted-AOC Being Lowest | |
| 2 | L2₹45.0 L+₹1.3 L (2.87%)Rejected-Finance | L2 | Rejected-Finance Being other than lowest |
Tender Value
₹49.6 L
EMD Value
₹99,200
Closing Date
12 Oct 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (EAST) DELHI CANTT-10
GE (EAST) DELHI CANTT-10
REPAIR/ REPLACEMENT OF CUPBOARDS/ KITCHEN CABINETS AND VARIOUS WOODEN UTILITIES AT OFFICERS/JCOs/ORs MARRIED ACCN OF AGE B/R-I UNDER GE (EAST) DELHI CANTT-10
2022_MES_551923_1
GE/DE-49/2022-23
Open Tender
Civil Works
Item Rate
180 days
GE (EAST) DELHI CANTT-10
Class D cat a (i)
8 documents required · 8 mandatory
₹500
Yes
GE (EAST) DELHI CANTT-10
₹99,200
Yes
22 Dec 2022
14 Sept 2022
14 Oct 2022
14 Sept 2022
12 Oct 2022
28 Sept 2022
Amount
Taking down Chowkats or frames from the opening of size not exceeding 1.5 sqm each with shutters (without taking off shutters from the frames) complete all as specified and directed
All as per Srl item No 1 above but size of opening exceeding 1.5 Sqmtr but not exceeding 4 Sqmtr
Taking down shutters of any description exc 1.00 sqm & nexc 2 sqm each.
Taking down cement plaster, any description on brick or stone or cement concrete walls including raking out joints, hacking for key, scrubbing down with water etc.
M&L for 15 mm thick cement plaster in cement mortar 1:4 on brick or concrete surface etc. on wall finished even and fair without using extra cement, all as specified .
M&L for 10 mm thick cement plaster in cement mortar 1:3 on brick or concrete surface etc. on ceiling finished even and fair without using extra cement, all as specified .
M&L brick work with sub class bricks straight or curved on plan exc 6 m mean radius built in cement mortar 1:6 including demolition complete all as specified and as directed.
Dismantling boarding , any description , fixed in any position with nails
Dismantling wrought iron or mild steel work of any description complete all as specified
S&F Plain , solid , straight chowkhats and frames of 2nd class hard wood, wrought , framed rebated on the solid , rounded or chamfered , put together with glue, pinned at joints, supplied and fixed.
S&F MS framed work as in door or gates of angle or other section with gusset plates,rail, braces,etc and similar work incl primer conform-ing to Fe 410-0 complete.
S&F Providing cement concrete type B1 1:2:4 (20 mm graded aggregate) in roof kerbs or mud stops, hold fast, rounded or chamfered on edges, water trought and the like including weathering slightly rounded or chemfered and throating as directed complete.
S&F 35mm thick 2nd class hard wood glazed and skeleton shutter's open rebated prepare to receive glass gauge etc edges of framing plain chamfered or rounded fitted with cut and mitered bead's for securing glass gauge etc size of marker of shutters as per SSR Part-I sec-8 clause 8.20(a).
S&F 35mm thick flush shutter, solid core construction, with block board core and plywood face panel commercial type on both sides.
S&F galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18 mm.
S &F Factory made solid panel pvc door shutter 30 mm thick (style) con-sisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be cov-ered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain col-our PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.
S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, complete as specified and directed
S&F 100mm long butt Hinges, medium weight, cold rolled mild steel complete
S&F 300mm long aluminum alloy anodized sliding door bolt with hasp and staple(bolt type)and fixing clips of sheet cast sec and fixing bolts and sliding bolts of extruded sec or cast aluminum alloy and fixed all as spd and directed.
S&F 150mm long aluminum anodized barrel tower bolt of cast aluminiun alloy section and fixed all as specified and directed.
S&F in repair 150mm long aluminum anodized barrel tower bolt of cast aluminiun alloy section and fixed all as specified and directed.
S&F Aluminium handles, 150mm size cast type anodised complete all as specified and directed
S&F in repairs Aluminium handles, 150mm size cast type anodised complete all as specified and directed
S&F in repairs for mild steel 300 mm long, ordinary rat tail rod pattern springs including roller and roller plate complete
S&F Floor door stoper of aluminium alloy body with hard drawn steel spring 140mm long.
S&F in repair Floor door stoper of aluminium alloy body with hard drawn steel spring 140mm long.
S&F Aluminium alloy powder coated (50micron) anodised aluminium door frame section 100xmm x 44mm x 2mm thickness, shutters of aluminium section of size 85mm x44mm x 2mm thick Top rail and both styled of size 100mm x 44mm x 2mm thick lock rail and bottom rail of size 115mm x 44mm x 2mm thick including aluminium anodised snap beading and rubber packing & 5.50mm thick frosted designer glass/12mm thick PVC board (as approved by GE) including 100 mm long aluminium butt hinges 04 Nos each leaf 200mm long tower bolt, 200 mm long fancy type aluminium handle -02 Nos on each leaf, 4 leaver brass 100mm long mortice lock & double action floor door spring/door closer heavy duty suitable for 1mtr wide shutter for each leaf, complete all as specified and as directed.
S&Faluminium anodized grills with 6mm x 5mm aluminium section having square gap of 100mm wide with fixing arrangement complete all as specified and directed
S&F 18/19 mm veenered particle board solid core, interior grade, with prelaminated both sides with decorative choice laminations as in shelf, drawer, cupboard, partition including wooden/PVC lipping/beading on expose surface or as required including dismantling etc as directed by Engr-in-Charge
S&F Continuous( piano) hinges(width of flaps 40mm when open , mild steel , bright finish or electrogalvanised
S&F Magnet ball catcher brass body with 8mm dia steel ball of approved qualities complete all as specified
S&F 100mm long Hasp and staple , safety type, Aluminium anodised with mild steel hinge pin including bolt to hinge plate and fixed with screws
S&F 40 mm dia. cup boards knobs fixed with nut , screw and washer of mild steel , bright finished
S&F 75mm Brass handle, cast type, polished bright complete all as specified and directed
S&F 3mm thick Sheet glass, ordinary quality and glazing with oil putty/wooden beading in square n exc 0.5 sq.m. in each pane complete all as specified and directed.
All same as per srl item No 37 here-in-before but figured glass pin head type.
S&F in repairs Drapery rod 25mm dia aluminium, powder coated teak wood texture finish 1 mm thick, with end bulbs as reqd, fixing brackets complete all as specified and directed.
S&F in repairs Drapery rod 25mm dia stainless steel pipe with steel finish 1 mm thick incl steel end bulbs, steel brackets etc incl connected items complete all as specified and directed.
Providing services on related to welding & blacksmith work based on day to day complaints on all working days (except Sunday and gazetted Holiday ) from 0900 hours 1700 hours complete all as specified and directed. Note- 1.The above task shall be carried out by deploying minimum 01 welder having black smith skills and 01 Helper on daily basis. 2) Necessary T&P, ladders,minor consumable viz welding rods/extras , equipments and safety gear shall be provided by the contractors. 3) All replaceble material shall be issued from MES store.
Taking down existing old steel rolling shutters in any position any description and size and removing from site of work complete all as specified and directed
S&F Steel rolling shutters , without ball bearing , as specified including top cover , anchoring rod,springs, hasp and staple and one shop coat of primer; erected in position as indicated ; push pull or manual type including making good to dismantelled portions complete all as specified and directed
M&L for repair to existing steel rolling shutters any size by repairing/ welding/ oiling/ greasing to anchoring rod,springs,side guide channel etc incl dismantling existing steel rolling shutters of any width and refixing after making serviceable after adjusting springs complete all as specified and directed.
Supply &Fabrication of machine pressed Cupboards, cabinets, drawers, shelf, shutter etc made of 18mm thick BSB HDHMR board of front faces glossy finish laminate & decorative lamination on other faces of make Action Tesa or equivalent with nails and adhesive including Auto/soft closing hinges for shutters of required nos as directed by Engr-in-Charge complete all as specified and directed.
50mm size cup board locks of brass including keys set, complete all as specified and as directed.
S&F 75mm Brass handle, cast type, polished bright complete all as specified and directed
S&f of telescopic channels, rollers for smooth sliding of drawers complete all as specified and directed 18"/20" long
S&F Stainless steel basket (plain) of size 370mm x 485mm x 150mm made of min 4mmdia stainless steel wire approved quality with suitable arrangement for fixing telescopic basket over and including telescopic channel 18 inches/ 20 inches in length two way extruded MS galvanised over rollers as approved by Engr-in-Charge. (Make: Godrej Cat art No 6121 or equivalent as approved by Engr-in-Charge)
S&F Stainless steel thali basket of size 370mm x 485mm x 200mm made of min 4mmdia stainless steel wire of approved quality with suitable arrangement for fixing telescopic basket over and including telescopic channel 18 inches/20 inches in length two way extruded MS galvanised over rollers as approved by Engr-in-Charge. (Make: Godrej Cat part No 6136 or equivalent as approved by Engr-in-Charge)
S&F Stainless steel Cutlary basket of size 370mm x 485mm x 100mm made of min 4mmdia stainless steel wire and bottom of S S perforated sheet approved quality with suitable arrangement for fixing telescopic basket over and including telescopic channel 18 inches/ 20 inches in length two way extruded MS galvanised over rollers as approved by Engr-in-Charge. (Make: Godrej Cat part No 6132 or equivalent as approved by Engr-in-Charge)
Providing and fixing factory made uPVC white colour Sliding window Three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories. (Note: The unit rate quoted by contractor includes cost of glass and all other connected accessories. Net Opening will be measured lor payment purpose.) (A) Area not exceeding 2.00 sqm each
M&L Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre including dismantling of existing any type ceiling complete all as specified and as directed by Engr-in-Charge.
M&L Hangers 6 mm dia. G.I. (@ 1200mm distance) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified
M&L Providing and fixing Gypsum board 12mm thick in ceiling fixed including two coats of distemper with screw as per manufacturers instructions
S&F WPC SHEET WALL PANELLING of thickness 5mm ( ±0.25 ) consisting of panels of desired size stuck on inner frame work of 50mm wide strips of 5mm (±0.25 ) thick Prelam WPC sheet. The panel & strips shall be Density of 650 Kg /Cbm Manufactured by an ISO-9001-2015 certified Company. The strips should have in their center a grove of 6mm width and 1mm depth for sinking the head of the screw used to fix the strips to the wall vertically at an equal interval of 10” between two WPC strips. The WPC strips shall be fixed to the wall using 65mm long M.S. screws through the groove in the strip by using PVC fasteners. The distance between two screws shall not be more than 200mm. A groove of 2mm may be left at the joint of two panels for aesthetic looks. The exact size of the panel and correspondingly of the grid may vary depending on the size of the wall. Optionally a strips of 5mm (±0.25 ) thick WPC sheet of width 75mm feathered at the edges shall be stuck at the places where two panels are joined, using solvent cement including all fixing assecerories, moulding, corner beads including dismantling of existing wall paneling complete all as specified and as directed by Engr-in-Charge. (Make- rajshree or equivalent)
Taking down existing ceiling of any type and any description and provn of E-board 4mmthick self design type tiles ceiling on GI Powder coated channel/Tee/Grid of make(Armstrong or equivalent) frame work with the following specification including cutting holes to brick wall built in cement mortar & making good in cm 1:3 of cement concrete 1:2:4 type BO as required :- (a) Plugging to wall around the rooms & supplying & fixing GI Powder coated angle of size 25x25x1.0 mm (b) 1.60mm dia GI wire suspenders with adjustable clamps including fixing to ceiling dash free fasterers (c) 25mm x 25mm x 1.5mm GI Powder coated tee as in main & cross members at 595mm c/c supported suspenders alongwith adjustable clamp to maintain level . (d) E-board 4mmthick self design type ceiling tiles of size 610mm x610mm confirming to relevant IS in squares of GI Powder coated Tee with clips made to shape. Shade and pattern of E- board shall be as approved by GE
S&F framed work such as grills, gratings, etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe .290.Gde-E-165 complete all as specified.
M&L Preparation of new steel surfaces and applying two coats of synthetic enamel paint on surfaces of any description exceeding 10 cm width or girth over a coat of red oxide, complete all as specified and as directed.
S&F Box type steel windows with double shutters including hinges, steel handle, tower bolt and steel peg stay complete with glazing bars dovetailed or welded including provision for AC/Desert cooler opening and cover including guard bar c/c 100mm, steel wire cloth and sheet glass complete all as specified and as directed. Note: Rate also included cost of glass and wire mesh, out to out dimension of window frame shall be measured for measurment purpose.
S&F Pre-Painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of a colour having tensile strength of 550Mpa as in roof covering/ cladding to wall, fixed with self tapping screws, including dismantling of existing complete all as specified and as directed.
S&F Pre-Painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of a colour having tensile strength of 550Mpa as in roof covering/ cladding to wall, fixed with self tapping screws, including dismantling of existing complete all as specified and as directed.
S&F for 2mm thick fibre glass reinforced translucent plain sheeting fixed with coach screw and washer in roof, wall etc. including dismantling of old sheet complete all as specified.
M&L Two coats of synthemic enamel paint over a coat of pink primer on new wooden surfaces of girth exc 10cm, including prepareation of surfaces, complete all as specifed and as directed.
M&L for preparation of new wall surface and applying two coats of cement base paint complete all as specified and as directed.
M&L for preparation of new wall surface and applying two coats of distemper oil emulsion over primer complete all as specified and as directed.
VIJAY KUMAR GUPTA
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .