SPECIAL REPAIR/RENOVATION OF TOILETS OF KENDRIYA VIDYALAYA AT AF STN CHABUA

Amount

Demolition of cement concrete (unreinforcced) in ground floors and paving n.exc 15 cm thickness (below or above ground level) complete all as specified and as directed.

Dismantling floor/hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

M&L for 25 mm thick PCC B0 1:2:4 using 12.5mm graded stone aggregate for base work complete all as specified and as directed.

M&L for 15mm thick screed bed or bedding layer for laying floor finishes in cement mortar (1:6) complete all as specified and as directed.

M&L for Non-skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exc 0.11 Sqm but nexc 0.18 Sqm, in floors etc and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M&L for 10mm thick rendering of fair faces of brickwork on concrete surfaces on cement plaster 1:4 for backing coat of wall tiles complete all as specified and as directed.

M&L glazed ceramic tiles in vertical surface 350x250x7mm / 450x350x7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match complete all as specified and as directed.

S&F in repair 10 litre capacity PVC valve less symphonic action type flushing cistern low level, white/coloured, with inlet, ball valve, float and handle including brackets complete all as specified and directed.

Supply only PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and as directed.

S&F in repair 15mm dia stop valve fancy type, chromium plated with long shank and cup concealed screwed down, high pressure, screwed both ends for iron or for unions and fixed.

S & F in repairs 15 mm dia bore cast copper alloy chromium plated fancy type angle cock with long shank & cup (concealed type) complete all as specified and as directed.

S&F in repair grating square fitting of size 150 mm of PTMT (Min wt 85 gms) complete all as specified and directed.

S&F in repair 15 mm dia bore bib taps cast copper alloy with fancy type, chromium plated with long shank & cup, capston head, screwed for iron pipe, or for brass ferrule complete all as specified and as directed.

S&F in repair vitreous china urinal, half stall type, white complete all as specified and as directed.

S&F in repair looking mirror 600x1200 mm size and 5mm thickness with PVC framing and PVC decorative beading complete all as specified and directed.

S&F in repairs 15mm size fancy type pillar taps, cast copper alloy, with capston heads, chromium plated, screwed down high pressure, with or without lettered 'Hot or cold' with long screwed shanks and fly nuts, screwed shanks and fly nuts, fixed for iron pipe and fixed complete all as specified and as directed.

Taking up or down 15mm dia steel tubing and connections including cleaning for refixing or removal to store complete all as specified and as directed.

Taking up or down 20mm dia steel tubing and connections including cleaning for refixing or removal to store complete all as specified and as directed.

S&F GI tubing 15mm dia medium grade with all fittings and fixed to wall, floor and ceiling etc complete all as specified and as directed.

S&F GI tubing 20mm dia medium grade with all fittings and fixed to wall, floor and ceiling etc complete all as specified and as directed.

S&F in repair vitrious china squatting pan "Orissa pattern" size 580x440mm white integral foot rests (excluding flushing cistern and flush pipe) Complete provision of cement concrete bedding complete all as specified and as directed.

Dismantling of PVC/AC drain pipes for 100 dia jointed in cement mortar and taking out of trenches, if required complete all as specified and as directed.

S&F 110mm bore PVC (SWR) pipes single socket, in any length with rubber ring joints, fixed to wall or in floor complete all as specified and as directed.

S&F 110mm bore PVC (SWR) bends any radius complete all as specified and as directed.

S&F 110mm bore PVC (SWR) junction single (single T) equal or unequal complete all as specified and as directed.

S&F in repair PVC floor trap for 100 mm size including jointing to waste pipe with solvent cement complete all as specified and directed.

Taking down chowkhat with shutter (without taking off shutters from the frame) exc 1.5 Sqm n.exc 4 Sqm. Complete all as specified and as directed.

All as per item No. 27 but area not exc 1.5 sqm each complete all as specified and as directed.

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck in side with solvent cement for styles and plain colour PVC sheet for top rail ,lock rail & bottom rail on either sides and as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded -sealed to the styles & rails with suitable PVC sheet beading, and joint together with solvent cement complete all as specified and as directed.

S&F solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS Square tube complete all as specified and as directed.

S&F for 150mm long anodised aluminium barrel tower bolt of extruded section complete all as specified and as directed.

S&F 125mm long anodised aluminium handles, cast type complete all as specified and as directed.

S&F stainless steel hinges 100mm size medium weight complete all as specified and directed.

S&F framed work such as grills, grating etc with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework or water tanks and similar work confiriming to Fe 290 Gde-E-165. Complete all as specified and directed.

M&L Flush shutter solid core construction, with black board core 40 mm thick and plywood face panels commercial type on both side and one face is covered with decorative face veneer with lipping/ frame to match complete all as specified and as directed.

M&L for preparation of new or previously untreated wooden surface of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete in any postion complete all as per specified and directed.

S&F steel window with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete without glazing bars, dovetailed or welded including guard bars/grills and necessary arrangements to fixed with wooden scantling/supports etc complete all as specified and as directed.

S&F steel ventilators with top hung shutters including hinges steel peg stay, complete without glazing bars, dovetailed or welded including guard bars/grills.

S&F 250mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts of extruted section complete all as specified and as directed.

S&F in repair CP power coated curtain rod with decorative type bracket including complete fixing on wall complete all as specified and dircted.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with nail complete all as specified and as directed.

S&F 3mm thick sheet, glass ordinary quality and glazing with oil putty in square n exc 0.5sqm in each pane complete all as specified and as directed.

All as per item No.42 but figured glass complete all as specified and as directed.

Demolition of reinforcement cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed.

M&L for Mild steel bars (TMT bars) 6 to 8mm dia cut to length bent to shape required, including cranking bending and spirally for hooping for columns, hooking ends and binding with mild steel wire annealed not less than 0.9mm dia complete all as specified and as directed.

M&L RCC 1:2:4 type B-1 (using 20mm graded agg) as in slab supported on walls beams and columns in floors, roof landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

Form work to soffits of suspended slabs/shelves etc thickness not exc 200 mm in horizontal or sloping complete all as specified and as directed.

Form work to edges of concrete flats horizontal or sloping exc 5 cm but not exceeding 10 cm wide complete all as specified and as directed.

Demolition of stone slabs laid bedded and pointed in any mortor and tiles of any description or thickness in floors, aprons etc complete all as specified and as directed.

M&L for 20mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:6) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed.

S&F in repair vitreous china wash hand basin white flat back size 550 x 400 mm excl taps waste chain, plug and porcelain stopper but including bracket, waste pipe and 32mm dia brass waste coupling/fitting complete all as specified and as directed.

S&F in repairs vitreous China wash hand basin (White), ovel shape waste coupling fittings and PVC waste Pipe complete all as specified and directed.

Schedule of Credit

M/S D P BERLIA

M/s Krishna Construction