Development of Dedicated Covid Health Center at Multistoreyed parking plaza of TMC near Eastern Expressway service road in TMC area.

Amount

Development of Dedicated Covid Health Center at Multi-storeyed parking plaza of TMC near Eastern Expressway service road in TMC area

Providing the MS Structure support and and fixing Non Asbestos Fibre reinforced aerated cement sandwich modules of 75mm thick, 600mm wide and 2400/2700/3000mm height made out of light weight fibre reinforced aerated cement/concrete core composed of portland cement, flyash, binders etc., with 5mm thick non-asbestos Fibre Cement Boards confirming Type-B,Catagory-III of IS 14862-2000 & ISO:8336:1993(E) on either side of the core. Panels having a tongue and groove on longitudinal side of the sandwich modules for joint of walls and partitions with apparent density minimum 700 Kg/cum, Thermal Conductivity (K-value) 0.12W/mK, maximum Axial Compresive Strength 42 Kg/Sqm. as per test method of ISO2380, P8:77 and having Fire Rating of 138min (Tested as per BS 476 Part 20-22). Sound Transmission Class of panels must be 40dB (Tested as per IS 9901 Part-3; 1981). These Panel modules are erected/ installed using galvanised iron steel tracks of 1mm thick, minimum 150GSM coated and of size 25mm x 76mm x 25mm as bottom track, 25mm x 76mm x 25mm as top track for fixing to the floor and top of the wall respectively including all necessary material required for erecting and fixing the wall panel complete as per the direction of the Engineer -in-charge. Finally the bevelled edges of the board in Rapicon Panel are to be jointed and finished so as to achieve flush finish, which includes Everest Jointing Compound & Fibre mesh tape as per the recommended practices of Everest Industries Limited. All peripherial joints/cutout are sealed with fire rated sealant.

Providing the MS Structure support and and fixing Non Asbestos Fibre reinforced aerated cement sandwich modules of 50mm thick, 600mm wide and 2400/2700/3000mm height made out of light weight fibre reinforced aerated cement/concrete core composed of portland cement, flyash, binders etc., with 5mm thick non-asbestos Fibre Cement Boards confirming Type-B,Catagory-III of IS 14862-2000 & ISO:8336:1993(E) on either side of the core. Panels having a tongue and groove on longitudinal side of the sandwich modules for joint of walls and partitions with apparent density minimum 700 Kg/cum, Thermal Conductivity (K-value) 0.12W/mK, maximum Axial Compresive Strength 42 Kg/Sqm. as per test method of ISO2380, P8:77 and having Fire Rating of 138min (Tested as per BS 476 Part 20-22). Sound Transmission Class of panels must be 40dB (Tested as per IS 9901 Part-3; 1981). These Panel modules are erected/ installed using galvanised iron steel tracks of 1mm thick, minimum 150GSM coated and of size 25mm x 76mm x 25mm as bottom track, 25mm x 76mm x 25mm as top track for fixing to the floor and top of the wall respectively including all necessary material required for erecting and fixing the wall panel complete as per the direction of the Engineer -in-charge. Finally the bevelled edges of the board in Rapicon Panel are to be jointed and finished so as to achieve flush finish, which includes Everest Jointing Compound & Fibre mesh tape as per the recommended practices of Everest Industries Limited. All peripherial joints/cutout are sealed with fire rated sealant.

Providing and fixing Waterproof membrane etc etc. complete.

Providing cement based water proofing treatment to terraces (Indian water proofing or alike) with brick bats laid in required slope to drain the water for any span after cleaning the base surface. Applying a coat of cement slurry admixed with approved water proofing compound and laying the brick bats on bottom layer in C.M.1:5 admixed with approved water proofing compound filling up to half depth of brick bats, curing this layer for 3 days, applying cement slurry over this layer joints of brick bats with C.M.1:3 admixed with approved water proofing compound and finally top finishing with average 20 mm. thick layers of same mortar added with jute fiber at 1 Kg per bag including finishing the surface smooth with cement slurry admixed with approved water proofing compound. Marking finished surface with false squares of 300mm x 300 mm. making the junctions at the parapet rounded and tapered top for required height, with drip mould at the junction of plaster and parapet and curing and covering 10 years Guarantee against leakproofness on Court fee stamp paper of Rs. 500/- including ponding test etc. complete.

Providing and laying vitrified matt fininsh tiles having size 590 mm to 605 mm x to 605 mm of 8 to 10 mm thickness and confirming IS. 15622-2006 (Group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement morar including neat cement float, filling joints, curing and cleaning etc. complete. a) Flooring

Providing and laying vitrified matt finish tiles having size 590 mm to 605 mm x to 605 mm of 8 to 10 mm thickness and confirming IS. 15622-2006 (Group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and cleaning etc. complete. b) Skirting

Providing and fixing black kadappa stone as shelves 25mm. thick machine polished, extending the polish upto 20 cm width on lowerside, rounding corners, laying in position jointing with bedding cement mortar 1:4 proportion curing etc etc. complete.

Providing and fixing alluminium composite door shutter with all necessary fitting and fixtures etc complte.

Providing and fixing in position powder coated aluminium louvered windows / ventilator of various sizes with powder coating as per detailed drawing and specifications including aluminium frames 80 x 38 mm x 1.22 mm box type, 5 mm thick sheet glass louvers, of approved quality etc. complete.

Providing and fixing in position aluminium partly openable and partly fixed window of any size as per detailed drawing and as directed by Engineerincharge with all necessary alluminium sections including necessary fixtures and fastening with 5 mm thick float glass etc. complete. b) With powder coating Note While arriving at the rate of item of item weight at 6.90 kg/Sqm is considered.

Providing and fixing collapsible steel gate in one / two leaves with hot rolled vertical channels of 18 x 9 x 3 mm minimum size, crossings of M.S. flats of size 18 x 5 mm T or E section for runner of minimum 40 x 6 mm size for flange, M.S. flat for top runner of minimum size 40 x 12 mm with roller wheels confirming to grade F.G. 150 fitted with snap headed rivets of minimum size 6 mm max. spacing of vertical channels be 100 mm enclosed gate position and clear space of 150 mm between two sets of crossings with hold fasts, stoppers, spaces, handles, locking arrangement and one coat of red lead primer and oil painting etc. complete. (I.S. 105211983).

Providing and fixing 2.00 mm thick polyvenyl venyl chloride flooring including leveling the base with white cement including pasting with appropriate material cleaning the surface etc. complete. (On Rent for 6 Month)

Providing and applying priming coat on concrete/ masonary/ Asbestos Cement plastered surfaces including scaffolding if necessary, preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter and sand papering as required etc. complete

Providing and applying washable oil-bound distemper of approved colour and shade to old and new surfaces in two coats including scaffolding, preparing the surfaces. (excluding the primer coat.) etc. complete.

Providing and fixing 1st class white glazed earthenware Orissa Type W.C. Pan 580 mm dia including P or S trap cast iron soil and vent pipe upto the outside face of the wall (1:5:1 0) cement concrete bedding 15 mm thick, 10 liter P.V.C. flushing cistern with all necessary pipe connection etc. complete. Spec. No.:As directed by Engineer-In-Charge.

Providing and fixing European type white glazed earthenware coupled closet symphonic trap with symphonic low level white glazed 10 litres cistern with black backlite seat with all necessary pipe connection etc. complete. Spec. No.:As directed by Engineer-In-Charge.

Providing and fixing White Glazed Earthenware full stall type Urinal with P.V.C. flushing cistern of 5 liters capacity with fitting, inlet pipes and stop tap, brackets for fixing the cistern, 32 mm dia. P.V.C flush pipe with fittings and flushing arrangement including lead soil pipe, lead trap, soil pipe connectionup to the outside face of the wall Bd.V.23 Page No. 562

Providing and fixing on walls/ceiling/floor ---mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.

40mm Dia

32mm Dia

25mm Dia

20mm Dia

15mm Dia

Providing and fixing 150 mm dia stabiliser pipe/ P.V.C. soil vent/waste pipe and with necessary fixtures and fitting such as bends, tees, single junctions, slotted vent, clamps etc. complete. Bd.V.39, Page No. 573

Providing and fixing screw down for 20 mm dia. wheeled stop tap of brass including necessary sockets/union nut complete. Bd.V.9 Page No. 555

Providing and fixing screw down for 15 mm dia. wheeled stop tap of brass including necessary sockets/union nut complete. Bd.V.9 Page No. 555

Providing and fixing 15cm x 10cm salt glazed stoneware gully trap in cement concrete 1:4:8 outside the building including cast iron grating in the sink, connecting glazed stoneware pipe, brick masonry chamber with cast iron lid and cast iron grating for the gully trap. Bd.V.38, Page No. 572

Providing and fixing 8cm C.I. Nahani Trap including C.I. grating bend and piece of C.I. pipe upto the outside face of the wall complete.

Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5 m.)

Providing dry/ trap/ granite/ quartzite/ gneiss rubble stone soling 15 cm to 20 cm thick including hand packing and compacting etc. complete.

Providing and laying Cast in situ/Ready Mix cement concrete in M15 of trap/ granite/quartzite/gneiss metal for steps including steel centering, plywood/steel formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface, only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.),with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand

Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in foundations and plinth of inner walls/ in plinth external walls including bailing out water manually , striking joints on unexposed faces, raking out joints on exposed faces and watering etc. Complete.

Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 mm thick in cement mortar 1:4 using waterproofing compound at 1 kg per cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 mm thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc.complete.

Providing and erecting 1.5 metre high wire fencing with seven rows of barbed wire supported on M.S.Angles ( 50mm x 50mm x 6mm) at 2.5 Metres, Center to center including excavating pits for foundqtion, fixing post in cement cocnrete 1:4:8 of size 45 x 45 x 45 cm fastening the wire and painting the M.S.Angles with one coat of red lead primer and two coats of painting etc.complete.

Providing and laying in situ / ready mix M-40 cement concrete of trap / granite / quartzite/ gniess metal for reinforced cement concrete block below the bearing including necessary scaffolding, plywood/steel formwork, compaction by vibrating, finishing in CM 1:3 and curing complete (Excluding reinforcement) Using reversible drum type mixer/ concrete batch mix plant (pan mixer)

Providing structural steel work of rectangular hollow steel section for steel trusses, other similar trussed items like purlin and members with all bracing, gusset plates etc. as per detailed designs and drawings or as directed including cutting, fabricating, hoisting, erecting, fixing in position making riveted/bolted/ welded connections and one coat of anticorrosive paint and over it two coats of oil painting of approved quality and shade complete.

Providing and fixing plain zinc sheeting of 0.80 mm thick (22 B.W.G.) over the ridge hip or valley to galvanized iron sheet roofing including all fastening and bolt galvanised iron screws and bolts, lead and bitumen washers etc. complete.(Weight of 6.8 kg/sq.m.).

Providing and fixing 15 mm diameter PVC Aqua kraft type of approved make super jet spray with flange 2 in 1 faucet 1.50 metre long including all accessories etc complete

Drilling or Core cutting horizontal, vertical or inclined holes in reinforced cement concrete and / or hard rock of following sizes for a depth / length upto 25 cm at all levels and locations as per directions of the PM.

As Directed by Engineer In-charge

a. 75 mm dia

b. 100 mm dia

c. 150 mm dia

Providing and fixing 450mm x 550mm size superior type Belgium mirror with 16mm dia. nickel plated towel rod etc. complete.

Providing and fixing chromium plated towel rod 16 mm dia and 75 cm. in length including all accessories complete.

Directional signage- Design, supply, fabrication and fixing acrylic multiligual braile (rise dots) direction sign board of size 6" x 9" design as per accessibility standereds and having 4mm thick acrylic base plate with upper case san serif words made on white acrylic non glair cut out letters of height 15mm raised not less than 0.8mm above baseplate and equivalent word writen in Hindi with Devnagari or Englishnon glair acrylic letters of height 15mm rised not less than 0.8mm above base plate and having non gair acrylic cut arrow point in required section. Each sign board to be fixed as per manufacturers specificatin on the wall at the approved location and at height of 1200mm from FFL and as per the directions.

Floor Derectories- Providing and fixing acrylic multingual braile (rised dots) ADA coplaint modular floor floor derectores system on all floor of size 1.50' x 2', showing the floor plan and the list of rooms on that floor, to be installed on each floor near the staircase, designed as per standereds and having 4mm thick blue acrylic base plate with upper case with upper case san serif and symboles made of white acrulic non glare cutout letters height 20mm raised not less than 0.8mm above base plate and the equivalent words/ written in hindi with devnagari non glare importated acrylic letters of height 15mm raised not less than 0.8mm above base plate. grade2/ grade1 bralie to be integral with sign face snd to be raised 0.5mm above base plate. each derectory to be fixed as per manufactureres on the wall at the approved location at height of 1200 from FFL.

Providing and Fixing Sanitization chamber

Providing and Fixing Printing Flex Informatory sign board of varous sizes

Supplying And fixing Water tank of 500 Letres with stand with aquaguard hot and cold UV water filter with water outlets at waterstation at various locations. ( On rent for 6 Months)

Supplying And fixing Wash Hand Bsin with ready to use condition including taps, waste coupling, flexible pipe, water supply arrangement etc complete. ( On rent for 6 Months)

Providing and supplying dining tables and chairs/benches 6 seater ( On rent for 6 Months)

Providing and Fixing Suplying Nurses section in octanom ( On rent for 6 Months)

Providing and fixing in position 8 feet height partition in position as indicated in drawing as derected by architect or Engineer-in-charge. The ulternet corner vertical member of the partition shall be taken upto the 8 feet level and same shall be anchored securely with the help of suitable cleats. the gap between framework shall be fill with glass wol 150 crwon etc. and same shall be finish with octonom sheets and suitable material i.e marin ply or waterproof plyor acron sheets etc, on both side finish as per following spacifications. The partition shall befinished with required fiting and fixture & harware etc complete. ( On rent for 6 Months)

Providing and fixing supplying receiption area, wating area rooms, Doctors cabin, food store farma store, nursing station doping and donning area with ocnom sheet / rapicon panels (50mm thick) orsimilar material, door and fixtures and closet including necessary fiting and fixtures etc...complete ( On rent for 6 Months)

Providing and fixing stainless steel sink of size 600 x 510 x 200 mm incluidng coupling, outlet pipe, elbow and other necessary fitting, finishing etc. complete.

Supplying doble door refrigerator domestic type of approved make 284 to 310 litres storage capacity, 5 star suitable for operation on 230/250 V, 50 cycles complete with automatic temperature control with one year guarantee for sealed unit and 10 years warranty for compressor in refrigeration system and marking sr. no. and date of erection.

Supplying and erecting D.C.P. type fire extinguisher 6 kg capacity cartridge type with gun metal cap 150 gram CO2 gas cartridge, powder and brackets conforming to IS 2171-1985/ IS 15683 and complete erected with necessary clamps made from 50x6 mm M.S. flat with nuts & bolts grouted in wall complete.

Providing Executive chairs.-( Rent for 6 Months)

Providing & Fixing Office chairs.-( Rent for 6 Months)

Providing & Fixing Stackable plastic chairs with arm rest -( Rent for 6 Months)

Stackable plastic chairs without arm rest -( Rent for 6 Months)

Providing Matress

Providing Bed sheet

Providing Blanket

Providing Pillow

Providing Pillow Cover

Providing Water Dispencer Hot and Cold of aquaguard Dimension in 380 X 340 X 1140 mm Weight in 33 Kgs. (dry), Dispense area 230 mm height, Standard Filtration Supplied Sediment Filter, Carbon Filter with capacity Header tank 11 lits, Cold tank 4 lits & Hot tank 1.5 lits Compressor 230V/50 Hz Compressor Water Temperature For cold 3 deg to 12 deg, Hot 87 deg

Providing Slotted angle racks.

Providing Floor mats. -( Rent for 6 Months)

Providing Glass round table

Providing Catering table

Providing Sand / Fire Bucket

Excavation for roadway in earth, soil of all sorts, sand, gravel or soft murum including dressing section to the required grade, camber and side slopes and conveying the excavated materials with all lifts upto a lead of 50m. and spreading for embankment or stacking as directed.

Excavation for roadway in soft rock, including dressing section to the required grade, camber and side slopes and conveying the excavated materials with all lifts upto a lead of 50m. and spreading or stacking as directed.

Transportation of excavated material including loading and unloading etc. complete. (c) lead upto 5 km.

Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing to proper grade and camber, applying and brooming requisite type of screening/ binding Materials to fill up the interstices of coarse aggregate, watering and compacting with vibratory roller to the required density. By Mechanical Means - Grading II (Using Screening Type B (11.2 mm) Aggregate)

Providing and applying tack coat with bitumen emulsion (RS1) using emulsion pressure distributer at the rate of 0.20 kg per Sq.M. on the prepared bituminous cleaned with mechanical broom

BITUMINOUS MACADAM: Proving and laying bituminous macadam using crushed aggregates of Grading 1, premixed with bituminous binder, transported to site with VTS , laid over a previously prepared surface, finished to the required grade, level, alignment, and rolling to achieve the desired compaction for 80/100 mm compacted thickness with 3.3% using specified grade of Bitumen. VG -30 bitumen USING Batch mix type hot mix plant with SCADA, Sensor Paver, vibratory roller.(VG-30 bulk bitumen rates are considered to arrive at rates)

BITUMINOUS CONCRETE:--Providing and laying bituminous concrete using crushed aggregate of grading 1, premixed with bituminous binder @ 6.50 % by weight of total mix and filler, transported at site with VTS, laid over a previously prepared surface, finished to the required grade ,level, alignment, and rolling to achieve the desired density for 50mm compacted thickness with drum mix plant with SCADA, Sensor paver and Vibratory roller excluding prime/Tack coat etc. complete --Bitumen of specified grade with stone dust filler. ( VG 40 bitumen rates are considered to arrive at rates)

Road Marking with Hot Applied Thermoplastic Compound with Reflectorizing Glass Beads on Bituminous Surface- Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorizing glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35 .The finished surface to be level, uniform and free from streaks and holes.complete.

ELECTRICAL DEPT.

Providing and Installing 5A/15A plug points for individual beds, nurse’s station, cabins, stores etc. Job includes maintenance and repairs of equipments during rental period (Rate for Six months)

Wiring for plug on board with Switch socket, copper wiring and earthing. Job includes maintenance and repairs of equipments during rental period (Rate for Six months)

Providing and Installing IP based CCTV setup with 24 hr recording, 30 days backup with min. 4MP, IP Camera and DVR, Cat-6 cabling monitor in all respect to cover the proposed covid facility within the Avalon parking plaza premises includes testing and commissioning. Job includes maintenance and repairs of equipments during rental period. (Rate for Six months)

Providing and installing EPABX system of 100 extensions to cover the proposed covid facility within the Avalon parking plaza premises includes testing and commissioning with min. 4 nos. FCT devices. Job includes maintenance and repairs of equipments during rental periods (Rate for Six months)

Providing and installing PA/ Sound system 15 Nos for area cover the proposed covid facility within the Avalon parking plaza premises includes all necessary mic, stands, speakers, power pack etc. Job includes maintenance and repairs of equipments during rental period (Rate for Six months)

Providing and installing all necessary power and distribution cables required for this works, main power distribution panel and allied works so as to complete the scheme for proposed covid facilities from fourth to ground floor (Lumpsum). Job includes maintenance and repairs of equipments during rental period (Rate for Six months)

Providing DG of Capacity 250 kVA with required manpower, change over switch operator and diesel consumption 30 hr per month operation. ICU DG shall be backed up by other DG, 24x7 skilled operators to ensure smooth operation of Generator. Job includes maintenance and repairs of equipments during rental periods (Rate for Six months)

Designing, providing, erecting, testing, commissioning, operating and maintaining electrical supply from Maharashtra Electricity Board including HT and LT cables, HT and LT switchgear, Metering unit, feeder pillar electrical panel on rental basis as per MSEDCL guide lines, Application to MSEDCL for sanctioning of load, depositing all connection charges amount to MSEDCL and release of HT connection to Hospital, obtaining permission from electrical Inspector including paying Necessary fees, APFC panel maintaining power factor of HT connections per MSEDCL guidelines, 24x7 skilled technician to maintain system, 22v/433volt Transformer with Plinth, Capacitor bank, Automatic power factor correction panel, all electrical panels and cables of appropriate ratings etc. Job includes maintenance and repairs of equipments during rental period (Rate for Six months)

Providing and Installing temporary 40 KVA online UPS pure sine wave suitable for 30 minutes battery backup to be provided for ICU beds with necessary interconnecting cabling, wiring, MCB's etc so as to complete the job. Job includes maintenance and repairs of equipments during rental period (Rate for Six months)

Providing and Installing exhaust fans of 300mm dia in every toilet and bath unit. Job includes maintenance and repairs of equipments during rental period (Rate for Six months)

Providing and Installing all distribution cable, wiring, DB, MCB, RCCB etc so as to complete the entire scheme (Lumpsum). Job includes maintenance and repairs of equipments during rental period (Rate for Six months)

Designing and providing comfort cooling Air conditioning system for medical and staff facilities including commissioning and de-commissioning. Job includes maintenance and repairs of equipments during rental period (Rate for Six months)

Designing and providing and maintaining negative pressure air conditioning system for ICU. The stale air in the confined space is to be sucked out using high cfm exhaust fan. Multiple anti cariogenic and UV light filters to be installed in the exhaust line to decontaminated and treat the air before it is released in the atmosphere. The negative pressure air conditioning system should be installed as per guidelines set by ISHRAE. Includes commissioning and de-commissioning. Job includes maintenance and repairs of equipments during rental period (Rate for Six months)

Supplying and installing Pedestal fan 400 mm. 230 Volts 50 cycles oscillating type. Job includes maintenance and repairs of equipments during rental period (Rate for Six months)

Supplying and installing LED Tube light. Job includes maintenance and repairs of equipments during rental period (Rate for Six months)

Supplying and installing LED Flood light 150W with necessary support and wires. Job includes maintenance and repairs of equipments during rental period (Rate for Six months)

Supplying and installing Bell buzzer with panel. Job includes maintenance and repairs of equipments during rental period (Rate for Six months)

Supplying and installing Television set of min. 40' size with 6 month Tata sky connection package. Job includes maintenance and repairs of equipments during rental period (Rate for Six months)

Supplying and installing Mortuary bed-6 bedded complete in all respect. Job includes maintenance and repairs of equipments during rental period (Rate for Six months)

Medical

Infusion Pump

Bed side Monitor 5 Para

Pulse oxy meter

BIPAP Machine

Ventilator Machine non Invasive

Ventilator Machine Invasive

ECG Machine 12 Channel A4

ECG Machine 3 Channel

Electric HDU Bed

Electric ICU Bed

Defibrilator

ABG Analyser

Syringe Infusion Pump

Portable50 mA Xray

Portable100 mA Xray

USG Machine

ICU Fowler Bed

Crash cart

Normal Bed with Mattress

Portable Suction Machine

Linen Troley

Overbed Table

Bedside Locker

ABS Bedside Locker

IV Stand

Wheel Chair

Stretcher Trolley

Digital BP Apt

Stethoscope

Nebuliser

Contactless Thermometer

Medical Gas

Supply and installation medical gas copper pipe make (Medical Grade Mandeve , Maxflow )/Equivalent

12 mm copper pipe ( thickness 0.7 mm )

15 mm copper pipe ( thickness 0.9 mm)

22 mm copper pipe ( thickness 0.9 mm )

28 mm copper pipe ( thickness 0.9 mm )

42 mm copper pipe ( thickness 1.2 mm )

54 mm copper pipe ( thickness 1.2 mm )

Isolation ball valve with both side end fittings make ( RN )Equivalent

Isolation Valve Box with valve 3 gas service

Micro processor based Digital area Gas Alarm with mute, testing keys

1 gas service

3 gas service

Bedhead panel with powder coated paint, 6" Long with provision of gas outlets two nos O2,Vacc ,& Air 4 bar , Electric switch socket 16 Amp ( 10 switch + 10 Socket )

Medical oxygen outlet point with ss threaded prove,

Medical Air 4 bar outlet point with ss threaded prove,

Medical vacuum outlet point with ss threaded prove,

Electrical Switch/Sockets 16 Amp ( 6 Modular Plat)

Metal body flow meter with Humidifier bottle

Ward vacuum unit with regulator , 600ml jar with vacc slider,

Moniter Stands (GI Powder Coated)

High pressure tube for Bed head panel drop down from ceilling, O2-200 mtr , Air 4 bar-200 mtr

Low pressure tube , Vacuum

12 + 12 oxygen manifold system complete with NRV system return valve set and flexible tail pipes connections,

Fully automatic oxygen control panel with NRV and 40 micron filter on both side,high pressure safety valve with high grade tail pipe

Compressed Air System Oil free Air compressor, (4 nos.), Providing, fixing, testing, commissioning with one 2000 ltr capacity Air reservoir tank , one 200 cfm air dryer , 4 nos 15 HP 3 phase motor & starter , with 2 no. 3 stage PXY filter make Anest Iwata / Equivallent

Vacuum system Vacuum pump (2nos.) with 10 HP 3 phase motor & starter with 2000 ltr capacity reservoir tank 1 no. with 2 nos Anti-bacteria filter & silencer make Anest Iwata / Equivallent

Supplying 11KL Medical L:iquid Oxygen Vessel With making Necessary foundation for Tank and Vaporiser.Also doing all necessary Civil Electric, Plumbing And Fencing work Required..Also to connect vessel to main Control Paneel With Copper Pipeline .

Facility Charges for Operatoion of Liquid Gas With24X7 providing Manpower.

RMB Event Management Pvt.Ltd