Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹40.5 LAccepted-AOC 57 7 MEGHNAD SAHA SARANI PRADHAN NAGAR SILIGURI 734 403 DIST DARJEELING | SILIGURI | DARJEELING | WEST BENGAL | 734403 | L1 | Accepted-AOC L1 Bidder | |
| 2 | L2₹42.6 L+₹1.6 L (4.00%)Rejected-Finance AMRITBASTI GARIGHURA PO SHIMULBARI PS KURSEONG DIST DARJEELING WB PIN CODE 734409 | 734409 | L2 | Rejected-Finance NOT LOWEST BIDDER | |
| 3 | L3₹42.6 L+₹1.7 L (4.17%)Rejected-Finance 9 SARAT BOSE ROAD OPP KALIDHAR TRANSFORMER HAKIMPARA SILIGURI 734 001 | DARJEELING | WEST BENGAL | 734001 | L3 | Rejected-Finance NOT LOWEST BIDDER | |
| 4 | L4₹43.0 L+₹2.1 L (5.12%)Rejected-Finance N A | NA | NA | 121004 | L4 | Rejected-Finance NOT LOWEST BIDDER | |
| 5 | L5₹43.1 L+₹2.1 L (5.20%)Rejected-Finance SAMARESH BOSE SARANI MILANPALLY SILIGURI 734005 DARJEELING WB | DARJEELING | WEST BENGAL | 734005 | L5 | Rejected-Finance NOT LOWEST BIDDER |
Tender Value
₹44.8 L
EMD Value
₹89,660
Closing Date
27 Mar 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Garrison Engineer Sukna
Garrison Engineer Sukna, Post-Simulbari, Dist.-Darjeeling, WB-734009
SPL REPAIR TO TOILET AND BATH ROOM NEAR BLDG NO T 21 (SINGLE OR LINE) AT 853 AT COY AND CERTAIN OTHER SANCTIONED WORKS IN SUKNA MIL STATION UNDER GE SUKNA
2023_MES_583743_1
GE Sukna/8512
Open Tender
Civil Works
Works
270 days
Sukna
AS PER TENDER
8 documents required · 8 mandatory
₹500
GE Sukna
₹89,660
Yes
31 Mar 2023
1 Mar 2023
28 Mar 2023
1 Mar 2023
27 Mar 2023
20 Mar 2023
2 Mar 2023 - 20 Mar 2023
Amount
BOQ Part-I (B/R Work)
Taking down chowkats or frame n.exc 1.5 Sqm each with shutter (without taking off shutter from the frame) complete all as specified and directed.
Taking down chowkats or frame exc. 1.5 Sqm but not exc. 4.0 Sqm each with shutter (without taking off shutter from the frame) complete all as specified and directed.
S&F 250 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple, bolt type and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy complete all as specified and directed. Make:- M/s Aluminium Udyog (Global) / M/s Trisul Industries / M/s Argent Industries
S&F in repairs 20 mm dia harrison rail, mild steel, chromium plated with & includig suitable fixing CP brackets, stops, rollers etc. complete all as specified and directed.
S&F (E-board) 4 mm thick non asbestos fibre cement building boards (designer pattern) fixed or laid / inserted to aluminium framework with screws in false ceiling (flat or sloping) of grid size 605 x 605 mm complete all as specified and directed. Make of boards:- Everest / Visaka Industries / Lafarge / Armstrong
S&F anodised aluminium snap grid frame work for false ceiling (flat or sloping) of grid size 605 x 605 mm and including hanging from structural steel / scantling with 6 mm GI wire complete all as specified and directed. Make of aluminium snap grid:- M/s Saint-Gobain Gyproc India Pvt Ltd / M/s USG Boral Building Products (India) Pvt Ltd / M/s PR Ceiling Products
Dismantling wrought iron or mild steel work of any description, in any position complete all as specified and directed
S&F compound girders and stanchions, lattice girders, aerial masts, staging for water tanks and the like including caps, bases, splices etc. built up from two or more beam or channel sections or angles with plates, including all lattice bars, stiffeners, gusset plates, etc. Fe 410 -W (Gde-E-250) quality-B complete all as specified and directed
S&F rolled mild steel in plates (plain or chequered) channels square cut or notched (ordinary and counter sunk) forming holes, with riveted, bolted or welded attachment - Fe 410 -W (Gde-E-250) quality-B complete all as specified and directed.
S & F of mild steel framed work such as grills, gratings etc. with ends of bars shouldered and / or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railing, frame work of water tanks and similar work conforming to Fe – 290 Gde E -- 165 complete all as specified and directed.
S&F pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm TCT (total coated thickness) of any colour having tensile strength of 550 Mpa as in roof covering cladding to wall etc, fixed with self tapping screws including dismantling of old asbestos sheets of any descriptions complete all as specified and directed. Make:- Colour Roof (India) Ltd / TATA Bluescope Steel Ltd / Dyna Roof / Bhushan Power & Steel Ltd / Prestar Infrastructure Projects Ltd.
S&F pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50 mm TCT (total coated thickness) of any colour having tensile strength of 550 Mpa as in roof covering cladding to wall etc, fixed with self tapping screws including dismantling of old asbestos sheets of any descriptions complete all as specified and directed. Make:- Colour Roof (India) Ltd / TATA Bluescope Steel Ltd / Dyna Roof / Bhushan Power & Steel Ltd / Prestar Infrastructure Projects Ltd.
Demolition and breaking up drain pipes of Internal dia 100mm (Salt glazed ware, AC or Reinforced concrete) set in cement mortar complete all as specified and directed.
Demolition of brick work or stone / boulder masonry, built in cement mortar and including all quoins, arches, pillars, etc. but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.
Dismantling of stone slab and tiles of any description or thickness in floors, aprons etc complete all as specified and directed.
Demolition of cement concrete (unreinforced) in ground floors and pavings n. exc. 15 cm thickness (below or above ground level) complete all as specified and directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.
M&L 20 mm thick granite slab(of any type) tiles machine cut, bedded jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding, polishing & over & including 15 mm thick screed bed in CM 1:4, complete all as specified and directed.
M&L for dholpur stone cladding in straight or curved surface of wall etc, gang saw cut with machine cut edges, unform colour of each stone of size exc 0.25 sqm but n.exc 0.5 Sqm of 16-20mm thick with hammer chisel cut dressed of all around edge (butch work) each stone, set and jointed neat cement slurry and pointed in white or coloured cemetn to match the stone including 10mm thick backing coat of cement mortar (1:4) complete all as specified and directed.
M&L rounding to edges of stone slabs one edge, such as in steps, cooking platform and other similar situations complete all as specified and directed.
S & F factory made Solid PVC door frame of size 50 mm X 47 mm made out of 5 mm plain coloured PVC sheet reinforced with mild steel square tube as per specification and drawing given on MES schedule Part – II (2010) complete all as specified and directed.
S&F factory made solid panel moulded PVC door shutter with particle board core 30mm thick (stiles) with 2 panel design with 2mm thick moulded PVC sheet on, 4 consisting of frame made out of MS tubes for top & bottom rails, MS frames shall be covered with heat moulded plain colour PVC 'C' channel, the front face & 2mm plain colour PVC sheet on back face in frame at site as per specifications and drawings complete all as specified and directed.
S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top rails & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; panelling of wire gauze in lieu of plain colour PVC sheet. The wire gauze shall be wrapped on an additional square 8mm MS solid tube and this tube shall be welded to MS tubes. the wire gauge shall be streched to tighten firmly, supply & fixing in the frame at site as per specification & drawings complete all as specified and directed. Make:- Rajshri Plastiwood Ltd / M/S Polyline Extrusion Pvt Ltd / M/s Navratan Specially Chemicals Ltd
M & L for brick work with sub class ‘B’ old size bricks straight or curved on plan exc. 6.00 m mean radius built in cement mortar 1:6 complete all as specified and directed.
S&F 2nd class hard wood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed. Species of timber :- Gamari (Gnelina arborea) / Chickerassy (Chukrasia Tabularis) / Siris (Albizzia procera) / Kalasiris (Albizzia Odoratissima)
M&L brick work with sub class 'B' bricks straight or curved on plan to any radius, built in CM 1:4 as in half brick thick wall and including provision of 02 Nos. 8 mm dia TMT bars in full length of wall at every fourth course complete all as specified and directed.
S&F aluminium powder coated three track sliding window with 5.5mm thick glass shutters in two track and stainless steel mosquito proofing single shutters in one track 0.56 mm nominal dia of wire and average width of aperture 1.18 mm with good quality bearing ,handle star lock rubber beading and glazing clips etc using following aluminium powder coated sections conforming to catalogue of JINDAL or of equivalent make complete all as specified and directed . (a) Bottom frame:20620 ,(b) Top frame and Vertical:20621 ,(c)Handle(side)20606 (d) Sutter interlock:20724 ,(e) Shuuer top and bottom:20844 , (f) Glazing clip:19352 Note : rate inclusive glass pane and masquoto proofing nets.
M&L for powder coated aluminium frame of sectional size 25mmx30mmx2.5mm thick as in ventilators with movable louvers and fitted with figured glass strips 4mm thick complete all as specified and directed.
M&L Non Skid ceramic coloured tiles 7 to 8 mm thick (square / rectangular) area of each tile exc. 0.11 sqm but n. exc. 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including screed bed 15 mm thick in CM 1:6 acomplete all as specified and directed. Make:- M/s Asian Granito India Ltd. / M/s Somany Ceramics Limited / M/s Varmora Granito Pvt Ltd / M/s OASIS Vitrified Pvt Ltd / M/s Sunshine Tiles Co (P) Ltd (Tiles) / Orient Bell Ltd / H & R Johnson India Ltd
M&L Non Skid ceramic coloured tiles 7 to 8 mm thick (square / rectangular) area of each tile exc. 0.18 sqm but n. exc. 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including screed bed 20 mm thick in CM 1:6 acomplete all as specified and directed. Make:- M/s Asian Granito India Ltd. / M/s Somany Ceramics Limited / M/s Varmora Granito Pvt Ltd / M/s OASIS Vitrified Pvt Ltd / M/s Sunshine Tiles Co (P) Ltd (Tiles) / Orient Bell Ltd / H & R Johnson India Ltd
M&L coloured glazed ceramic tiles 350 x 250 x 7 mm/450x350x7 mm thick as in dado / skirting and vertical surfaces, set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 10 mm thick screed bed in CM 1:3 including roughening of surface complete all as specified and directed. Make :- M/s Asian Granito India Ltd. / M/s Somany Ceramics Limited / M/s Varmora Granito Pvt Ltd / M/s OASIS Vitrified Pvt Ltd / M/s Sunshine Tiles Co (P) Ltd (Tiles) /Orient Bell Ltd / H & R Johnson India Ltd
M&L 25 mm thick PCC 1:2:4, type B-0 (using 12.5 mm graded crushed stone aggregate) as in Flooring, etc., finished Concrete Surfaces Even and rough to receive cement screed, complete all as specified and directed.
M&L PCC lean concrete, 1:5:10 type E-2, (using 40 mm graded crushed stone aggregate) as in filling and mass concrete or similar work incl WPC complete all as specified and directed (WPC shall be measered & paid sepreatly)
M&L for PCC 1:3:6 type C-2 (using 40 mm graded stone aggregate) as in surface channel and drain complete all as specified and directed.
M&L 75 mm thick, PCC 1:3:6, type C-2, (using 40 mm graded crushed stone aggregate) as in plinth protection, hardstanding, floors, paths, etc, finished even and fair without using extra cement complete all as specified and directed.
S & F for 100 mm bore of pipe stack clamp out of 50mm x 5 mm flat iron and 16 mm dia round iron stay including bolts and nuts and securing ends of stays to wall or roof complete all as specified and directed
S & F for 75 mm bore of pipe stack clamp out of 50mm x 5 mm flat iron and 16 mm dia round iron stay including bolts and nuts and securing ends of stays to wall or roof complete all as specified and directed
M&L for 75mm dia, type B-1, 1:2:4 cast iron floor/nahani trap with grating including jointing to waste pipe fixed in cement concrete complete all as specified and directed
M&L for 100mm dia, type B-1, 1:2:4 cast iron floor/nahani trap with grating including jointing to waste pipe fixed in cement concrete complete all as specified and directed
M&L RCC nominal mix 1:2:4 type B1 as in slab supported on walls ,beams and coloumns in floors,roofs,landings, kitchen slabs etc complete all as specified (Reinforcement shall be measured and paid seperately) including demolition of old concrete complete all as specified and directed.
Taking down cement plaster on brick or concrete surfaces / ceiling, racking out joints hacking for key scrubbing down with water etc complete all as specified and directed.
M & L for 15 mm thick rendering external wall in cement mortar 1:4 on fair faces of brick work or concrete surfaces and finished the surface even and fair without using extra cement complete all as specified and directed.
M & L for 15 mm thick rendering internal wall in cement mortar 1:6 on fair faces of brick work or concrete surfaces and finished the surface even and fair without using extra cement complete all as specified and directed.
M&L 10 mm thick rendering in CM 1:3 on fair faces of brick work or concrete surfaces as in ceiling, chajja, soffits etc, and finished even and smooth without using extra cement complete all as specified and directed.
Supply only integral water proofing compound conforming to IS:2645-1975 specification complete all as specified and directed.
S&F in repairs vitreous china squatting pan, "Orissa pattern" white, size 580 x 440 mm with integral foot rest, 'P' or 'S' trap and including connection to trap and to flushing pipe, CI anti -syphonage pipe complete all as specified and directed. Make:- Hindware, Cat No. - 20042 (Starwhite) or equivalent in Cera (Med Range) / M/s Jaquar & Company Pvt Ltd (Essco)
S&F vitreous china wash hand basin white flat back of size not less than 550 x 400 mm with and including PVC waste pipe 32 mm bore, CP waste fitting and cutting for and pinning in ends of brackets etc, complete all as specified and directed. Make of wash hand basin:- Hindware, Cat No. - 10010 (Starwhite) or equivalent in Cera (Med Range) / M/s Jaquar & Company Pvt Ltd (Essco) Make of waste fitting - Prayag Cat No.- BEA-10 or equivalent in M/s Jaquar & Company Pvt Ltd (Essco) / Hindware (Less Italian Collection ) / Cera (Med Range) Make of PVC waste pipe - Prayag / M/s Pearl Precision Products Pvt Ltd / Polytuf
S&F in repair PVC low level flushing cistern of 10 litres capacity, valve less, syphonic action type, white body, with inlet ball valve, float and handle including brackets complete all as specified and directed. Make:- Parryware, Cat No.- E8055 or equivalent in Cera(1st quality) / Hindware / Essco
S&F PVC connections 15 mm size with PTMT nuts, of length 450 mm complete all as specified and directed. Make:- Prayag Cat No.- 323-TK or equivalent in M/s Pearl Precision Products Pvt Ltd / Polytuf
S&F in repairs fancy type chromium plated pillar tap 15 mm bore with capstan head, , screwed down high pressure, with or without lettered “hot" or “cold” with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and directed. Make:- M/s Jaquar & Company Pvt Ltd (Essco), Cat No. - SQT-507KN or equivalent in Hindware (Less Italian Collection) / Cera (Med Range) / Prayag (7000 & 8000 Series)
S & F in repairs chromium plated 15 mm bore bib taps, fancy type cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed. Make:- Essco, Cat No. - SQT-512KN or equivalent in Hindware (Less Italian Collection) / Cera (Med Range) / Prayag (7000 & 8000 Series)
S&F in repairs chromium plates angle stop cock/stop cock, 15 mm bore, fancy type,including CP nipple and socket complete all as specified and directed. MAKE : M/s Jaquar & Company Pvt Ltd (Essco),Cera (Med Range) / Prayag
S&F in repairs swivel shower of brass chromium platd with long head for fixing with 15mm pipe complete all as specified and directed. Make:- M/s Jaquar & Company Pvt Ltd (Essco), / Hindware (Less Italian Collection) / Cera (Med Range) / Prayag (7000 & 8000 Series)
S & F of 100 mm long mild steel butt hinges, medium weight cold rolled complete all as specified and directed.
S&F 100 mm butt hinges, extruded aluminium alloy with galvanized mild steel hinge pin, anodised and fixed, type B-21 complete all as specified and directed. Make:- M/s Aluminium Udyog (Global) / M/s Trisul Industries / M/s Argent Industries
S&F 5 mm thick tinted glass and glazing with oil putty / wooden beads in square n.exc 0.50 sqm in each pane complete all as specified and directed. Make:- Asahi India Glass Ltd. / Saint Gobain / Modiguard / Triveni Float / IAG / Hindustan Pilkington
S&F 5 mm thick tinted glass and glazing with oil putty / wooden beads in square exc 0.50 sqm in each pane complete all as specified and directed. Make:- Asahi India Glass Ltd. / Saint Gobain / Modiguard / Triveni Float / IAG / Hindustan Pilkington
S&F PVC (SWR) pipes 75 mm bore single socketed in any length with rubber ring joints laid in trenches/ fixed to wall/ floor complete all as specified and as directed. Make:- Supreme / M/s Fusion Industries Ltd / M/s Skipper Ltd / M/s HIL Limited
S&F PVC (SWR) pipes 110 mm bore single socketed in any length with rubber ring joints laid in trenches/ fixed to wall/ floor complete all as specified and as directed. Make:- Supreme / M/s Fusion Industries Ltd / M/s Skipper Ltd / M/s HIL Limited
S&F PVC (SWR) 75 mm bore bend of any radius complete all as specified and directed. Make:- Supreme / M/s Fusion Industries Ltd / M/s Skipper Ltd / M/s HIL Limited
S&F PVC (SWR) 110 mm bore bend of any radius complete all as specified and directed. Make:- Supreme / M/s Fusion Industries Ltd / M/s Skipper Ltd / M/s HIL Limited
S&F in repairs rotational moulded polyethylene water storage tanks of 1000 Litres capacity, triple layered (cylindrical vertical with closed top) hoisted and fixed in position and including 20 mm dia nipple suitable for HDPE water tank (minimum weight 45 gm), 20 mm bore ball valves (minimum weight 210 gm) high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed to 20 mm bore pipe & locking with GI wire (to prevent monkey menace) to tank complete all as specified and directed. Make of tank:- Sintex / Polycon / Oriplast / Jindal Make of ball valve:- Prayag / M/s Pearl Precision Products Pvt Ltd / Polytuf
M&L for mild steel work as in bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; handmade sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and directed.
Use and waste of formwork to soffits of suspended slabs, chullah, etc such as roof slabs, floor slabs, landings and similar works not exc. 200 mm thick horizontal or slopping in rough finished flat surface of concrete complete all as specified and directed.
M&L RCC 1:2:4, Type B1 (20 mm graded crushed stone aggregate) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and like and including demolition of old concretecomplete all as specified and as directed.
M & L for mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.
M & L for mild steel TMT bars 06mm to 08mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.
S&F 10 mm thick PVC insulation panel with EPS stuck to 1 mm plain PVC sheet suitably placed in false ceiling including GI frame work for seamless ceiling comprising of GI perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9mm thick having equal flanges of 15mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (n. exc. 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel at 457 mm centre to centre and necessary hangers 6 mm dia GI fixed to roof and complete all as specified and directed. Make of GI Grid- M/s Saint-Gobain Gyproc India Pvt Ltd / M/s USG Boral Building Products (India) Pvt Ltd / M/s PR Ceiling Products Make of PVC Insulation Panel :- Rajshri Plastiwood Ltd / M/S Polyline Extrusion Pvt Ltd / M/s Navratan Specially Chemicals Ltd
S & F of 150 mm long (Length of bolt) Aluminium anodised barrel tower bolts, of extruded section complete all as specified and directed.
S & F of 75 mm long Aluminium handles, cast type, anodised complete all as specified and directed.
S & F of 150 mm extruded Aluminium alloy handles, fabricated type, anodised complete all as specified and directed.
S & F of 150 mm long Aluminium handles, cast type, anodised complete all as specified and directed.
S&F in repairs 150 mm floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed. Make:- M/s Aluminium Udyog (Global) / M/s Trisul Industries / M/s Argent Industries
S&F in repairs door closer hydraulically regulated aluminium (die cast) body, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed. Make :- Hardwin / Godrej / Doorset
S&F ball catches with 8 mm dia steel ball, brass body and striking plate including letting in and fixed complete all as specified and directed.
Cutting chases, pinning in, making good to facing where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, lintels, shelves etc, and cutting chases for concealed water tubing or concealed conduit wiring etc, and making good on brick walls, cutting n.exc. 10 cm in girth complete all as specified and directed.
S&F in repairs stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and directed.
M&L PCC 1:3:6 type C-1 (using 20 mm graded crushed stone aggregate) as in copings, bed plates, bed block for holdfasts, filling in pressed steel door frames, benching, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating and including necessary formwork complete all as specified and directed.
S&F in repairs 15 mm bore galvanised steel water tubing medium grade and including necessary GI fitting (such as bends, elbows, tees etc. and fixed to wall / ceiling or laid in / on floor complete all as specified and directed.
S&F in repairs 20 mm bore galvanised steel water tubing medium grade and including necessary GI fitting (such as bends, elbows, tees etc. and fixed to wall / ceiling or laid in / on floor complete all as specified and directed.
S&F in repairs CP sensor faucet for wash basin (battery operated ) complete all as specified and directed. Make: Jaquar Cat Part No SNR 51027.
S&F in repairs CP sensor flushing valve for urinal with complete kit (battery operated ) complete all as specified and directed. Make: Jaquar Cat Part No SNR 51097.
S& F in repairs 900mm x 450mm Curved shaped urinal partition with frosted glass size 8mm to 10 mm with chrome finish complete all as specified and directed. Make: Jaquar Model No 1810 - UC /1110UC
S& F Urinal (back inlet with fixing accessories size 340x325x650mm complete all as specified and directed. Make: Jaquar cat No URS - WHT - 13263
S&F in repair 15mm dia 2 way bib cock fancy type chromium plated type complete all as specified and directed. Make- Jaquar
S&F in repair 15 mm bore angular stop cock cast copper alloy screwed down with crutch handles screwed both ends for iron pipe complete all as specified and directed. Make :Jaquar Cat part No CON- 053KN
S&F in repairs EWC rimless single piece WC with UF Soft Close seat cover , hinges , dual flush cistern fitting , fixing accessories and accessories set size 360 x 675 x 750 mm complete all as specified and directed. Make: Jaquar /Cera
S&F in repairs Wash Hand Basin Counter Top Basin Size 705 x 460 x 195 mm complete all as specified and directed. Make :- Jaquar Cat No. ALS WHT 85601
S&F in repair stainless steel Towel rail 600mm complete all as specified and as directed. Make :- Jaquar Cat No.AQN -7711
S&F in repair 600mm stainless steel Towel rack with lower hanger complete all as specified and as directed. Make :- Jaquar Cat No. Cat pt No :- AKP SSF -35781PS
S&F in repair Soap dispenser with Glass bottle complete all as specified and as directed. Make :- Jaquar Cat Pt No ACN -1135 N
S&F in repair Soap dish holder complete all as specified and as directed. Make :- Jaquar Cat Pt No ACN -1131 N
S&F in repair Towel ring Square with round flange complete all as specified and as directed. Make :- Jaquar Cat Pt No ACN -1121B N
S&F in repair Towel roll holder with stainless steel flap complete all as specified and as directed. Make :- Jaquar Cat Pt No ACN -1153S
S&F in repair Tumbler holder complete all as specified and as directed. Make :- Jaquar Cat Pt No AKP -35741P
S&F in repair Double Coat Hook complete all as specified and as directed. Make :- Jaquar Cat Pt No AKP -35761P
S&F in repair Hand Shower ( health faucet ) with 8 mm dia , 1.2 m long fexible tube & wall hook complete all as specified and as directed. Make :- Jaquar Cat pt No ALD -573
PVC connection pipe 450 mm long braided hose with two 15mm nuts & rubber washers without nipple complete all as specified and as directed. Make :- Jaquar cat pt No - ALD 805B
PVC connection pipe 450 mm long braided hose with two nuts & rubber washers (suitable for basin mixers ) complete all as specified and directed Make :- Jaquar cat pt No ALD 803AB
PVC connection pipe 600 mm long braided hose with two nuts & rubber washers (suitable for basin mixers ) complete all as specified and directed Make :- Jaquar cat pt No - ALD 801B
Dismantling 75/100 mm dia CI pipes including tee, branch piece, bend at any position (wall or laid in trench) all as specified
M & L CI sand cast pipe 100mm dia for soil, waste or vent pipe in any lengths with or without ears, jointed with and including cement joints fixed to walls including necessary clamps etc., complete all as specified and as directed.
Except CI sand cast pipe 100mm dia for soil, waste or vent pipe in any lengths with or without ears, jointed with and including cement joints fixed to walls including necessary clamps etc., complete all as specified and as directed.
M & L CI sand pipe 75mm dia for soil, waste or vent pipe in any lengths with or without ears, jointed with and including cement joints fixed to walls including necessary clamps etc., complete all as specified and as directed.
Except CI sand pipe 75mm dia for soil, waste or vent pipe in any lengths with or without ears, jointed with and including cement joints fixed to walls including necessary clamps etc., complete all as specified and as directed.
S & F CI branch piece 100mm bore, double(eaqual or unequal), with parallel branches and fitted with oval access door complete all as specified and as directed.
S & F CI branch piece 75mm bore, single(equal or unequal),ordinary or inverted spigot or socketted type with parallel branches and fitted with oval access door complete all as specified and as directed.
S & F CI bends 75 mm bore with oval access door complete all as specified and directed
S & F CI bends 100 mm bore with oval door access complete all as specified and directed
S & F CI cowls 75 mm complete all as specified and directed
S & F CI cowls 100 mm complete all as specified and directed
S & F of 40 mm thick flush shutter solid core construction, with particle board core and plywood face panels, commercial type on both faces complete all as specified and directed.
M&L complete removal of existing treatment of old decorated wall surfaces and including applying two coats of weather coat acrylic exterior emulsion paint over a coat of primer and over a thin layer of wall care putty to obtain smooth finish complete all as specified and directed. Make of acrylic exterior emulsion paint : Apex Dust Prooff Emulsion (Asian Paints Ltd)/ Weathercoat Glow(Berger)/ Xtra Tough(Shalimar) Make of primer/ wall care putty:- Asian Paints/ Berger / Shalimar Paints
M&L complete removal of existing treatment of old decorated wall surfaces and including applying two coat of oil emulsion distemper over a coat of primer over a thin layer of wall care putty to obtained smoothness of plastered surfaces complete all as specified and directed. Make of oil bound distemper :- Apcolite Premium Emulsion (Asian Paints ltd)/ Rangoli (Berger) / No. 1 Premium Acrylic Distemper(Shalimar) Make of primer/ wall care putty:- Asian Paints/ Berger / Shalimar Paints
M&L for prepration of new plastered surfaces of wall applying two coat of oil emulsion distemper over a coat of primer over a thin layer of wall care putty to obtained smoothness of plastered surfaces complete all as specified and directed. Make of oil bound distemper :- Apcolite Premium Emulsion (Asian Paints ltd)/ Rangoli (Berger) / No. 1 Premium Acrylic Distemper(Shalimar) Make of primer/ wall care putty:- Asian Paints/ Berger / Shalimar Paints
M&L complete removal of existing treatment of old decorated ceiling surfaces and including applying two coat of oil emulsion distemper over a coat of primer over a thin layer of wall care putty to obtained smoothness of plastered surfaces complete all as specified and directed. Make of oil bound distemper :- Apcolite Premium Emulsion (Asian Paints ltd)/ Rangoli (Berger) / No. 1 Premium Acrylic Distemper(Shalimar) Make of primer/ wall care putty:- Asian Paints/ Berger / Shalimar Paints
M & L for preparation of newly plastered or previously untreated surfaces of walls/ ceiling and applying two coats of oil bound distemper over a coat of primer and over a thin layer of wall care putty to obtain smooth finish complete all as specified and directed. Make:- Bison (Berger) / Tractor (Asian) / ICI (Super Cote) Make of oil bound distemper :- Apcolite Premium Emulsion (Asian Paints ltd)/ Rangoli (Berger) / No. 1 Premium Acrylic Distemper(Shalimar) Make of primer/ wall care putty:- Asian Paints/ Berger / Shalimar Paints
M&L preparation of new wooden surfaces of any description, not otherwise described over 10 cm width or girth and including applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed. Make of synthetic enamel paint:- Apcolite Premium Gloss Enamel (Asian) / Luxol High Gloss Enamel (Berger) / Superlac Premium High Glass Enamel (Shalimar Paints Ltd) Make of primer/ wall care putty:- Asian Paints/ Berger / Shalimar Paints
M&L preparation of old wooden surfaces of any description, not otherwise described over 10 cm width or girth and including applying one coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed. Make of synthetic enamel paint:- Apcolite Premium Gloss Enamel (Asian) / Luxol High Gloss Enamel (Berger) / Superlac Premium High Glass Enamel (Shalimar Paints Ltd) Make of primer/ wall care putty:- Asian Paints/ Berger / Shalimar Paints
M&L for cutting grooves in brick wall, 75mm wide and 65 mm deep and shaping horizontal face of groove with cement mortar 1:3 complete all as specified and directed.
S&F in repairs 40 mm bore high density polyethylene pipes (HDPE) of pressure rating 6 kgf/cm2 and fixed complete to wall, ceiling or in floors etc complete all as specified and directed. Make:- Supreme / M/s Ori-Plast Limited / M/s SHK Polymers
M&L 10 mm thick double charged premium quality coloured vitrified ceramic tiles (square / rectangular) polished, area of each tiles exc. 0.42 but n. exc. 1.00 sqm in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 20 mm thick screed bed in CM 1:6 complete all as specified and directed. Make :- M/s Asian Granito India Ltd. / M/s Somany Ceramics Limited / M/s Varmora Granito Pvt Ltd / M/s OASIS Vitrified Pvt Ltd / M/s Sunshine Tiles Co (P) Ltd (Tiles) / Orient Bell Ltd / H & R Johnson India Ltd
M&L 10 mm thick double charged premium quality coloured vitrified ceramic tiles (square / rectangular) polished, area of each tiles n. exc. 0.36 sqm in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 20 mm thick screed bed in CM 1:6 complete all as specified and directed. Make :- M/s Asian Granito India Ltd. / M/s Somany Ceramics Limited / M/s Varmora Granito Pvt Ltd / M/s OASIS Vitrified Pvt Ltd / M/s Sunshine Tiles Co (P) Ltd (Tiles) / Orient Bell Ltd / H & R Johnson India Ltd
M&L 10 mm thick double charged premium quality coloured vitrified ceramic tiles (square / rectangular) polished, area of each tiles n. exc. 0.36 sqm in skirting/dado etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 10 mm thick screed bed in CM 1:3 complete all as specified and directed. Make :- M/s Asian Granito India Ltd. / M/s Somany Ceramics Limited / M/s Varmora Granito Pvt Ltd / M/s OASIS Vitrified Pvt Ltd / M/s Sunshine Tiles Co (P) Ltd (Tiles) / Orient Bell Ltd / H & R Johnson India Ltd
M&L 18 to 20 mm thick marble tiles (makrana white) machine cut, over 15 mm thick screed bed in CM 1:4 including pointing in white cement (1:2) using marble dust with admixture of pigment to matchwith marble shade complete all as specified and directed.
All as per Sl item No. 2.26 above but in skirting/dado.
Dismantling boarding, any description, fixed in any position with nails or screws complete all as specified and as directed.
Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as specified and as directed.
S&F 18/19mm thick particles board medium density, flat pressed, single layer or three layer type with BWR type adhesive fixed with screws to timber frame work complete all as specified and as directed. Make :- M/s Archidply & Industries Ltd / M/s Sylvan Plyboard (India) Pvt. Ltd (Brand : Sylvan Ply) / M/s Jain Wood Industries (Brand Jayna)
S&F 12 mm thick prelaminated particle board, interior grade, prelaminated both side with decorative choice lamination, fixed with necessary clips and other like to aluminium frame work, as in doors, windows, partitions etc complete all as specified and directed. Make:- Kitply / Bhutan Board / Novapan / Greenply
S&F 100 mm hasp and staple, mild steel, wire type, stove enamelled black, including bolt to hinge plate and fixed with screws complete all as specified and directed. Make:- M/s Mowjee / M/s Crown / M/s Everite / M/s Harrison
S&F solid PVC wall lining consisting of 5 mm thick plain colour PVC sheet inclusive of solvent cement and fixing at site on frame complete all as specified and directed. Make:- Rajshri Plastiwood Ltd / M/S Polyline Extrusion Pvt Ltd / M/s Navratan Specially Chemicals Ltd
S&F in repairs 75 mm bore PVC (SWR) floor trap, plain with grating and including jointing with solvent cement complete all as specified and directed. Make:- Supreme / M/s Fusion Industries Ltd / M/s Skipper Ltd / M/s HIL Limited
S&F 110 mm bore PVC (SWR) vent cowl complete all as specified and directed. Make:- Supreme / M/s Fusion Industries Ltd / M/s Skipper Ltd / M/s HIL Limited
S&F 75mm dia stainless steel gratings, doom type, chromium plated, with or without waste hole, fixed to floor trap complete all as specified and as directed. Make :- M/s Prayag / M/s Jaquar & Company Pvt Ltd (Essco) / Hindware (Less Italian Collection) / Cera (Med Range)
S&F 12 mm thick (minimum) toughened glass as in frame, doors, partition etc, and including design etching work, necessary hinges, handles, clips etc, complete all as specified and directed. Make:- Asahi India Glass Ltd. / Saint Gobain / Modiguard / Triveni Float / IAG / Hindustan Pilkington
M&L decorative type plaster of paris work of size not less than 50 mm x 50 mm, as in cornice or junction of wall and ceiling complete all as specified and directed.
S&F powder coated aluminium anodised door, window, cup board and ventilator shutter and frame any type (sliding or openable) with frame and either similar work, fabricated aluminium mesh etc, aluminium heavy section fabricated including all necessary roller wheels, cleats, handle, locking arrangement and arrangement to fix wire mesh with aluminium channel beading and stainless steel screw including cost of rubber gasket, beading roller wheels etc,complete all as specified and directed. Make:- M/s Halco Aluminium Extrusion / M/s Bhagwati Sai Metal Alloys / M/s Argent Industries Note: (a) The weight of rubber gasket beading, roller wheels, etc will not be measured with the weight of aluminium shutters as only aluminium items shall be measure. (b) Wire mesh shall be measured and paid separately. (c) Aluminium hinges shall be included in the unit rate
BOQ Part-II (E/M Work)
M&L for point wiring for light points / fan points controlled by one, one way switch with (FRLSH) PVC insulated unsheathed stranded copper conductor cable of size 1.5 Sqmm, with PVC insulated unsheathed stranded copper conductor cable of size 1.5 Sqmm stranded for earth continuity wire, to be drawn in and including , PVC medium grade Concealed conduit not less than 20mm dia with modular flush box, modular plate and frame all necessary wall cutting and making good disturbed surface complete all as specified and as directed. Note 1: - Red/yellow/blue colour cable should used for phase connection, Black colour cable should be used for neutral connection and green cable should be used for earthing connection, separate cable for earthing and neutral to be used for each individual circuit from the distribution board/Switch board. Note 2: - Joints in wire/cable in between switch board and points are not allowed. Note 3: - Circuit from DB for 15 A points, light points and 5 A points shall be shall be separate and independent. Note 4: - All socket points shall be provided to Table top hight for easy of operation. Note 5: - All earth wire shall be terminated to DB's Earth Bus for further connection with earth pit. Make of cable:- Havells /MESCAB/ Polycab /Phinolex Make of PVC Conduit:- Richa Cables / AKG Industries / Harsh Electro Systems / Panasonic (Anchor)
All as per item No 3.01 here-in-before but for 5 pin 15 Amps switch socket combination on independent board with 2.5 Sqmm cable for phase neutral and earth.
All as per item No 3.01 here-in-before but for 3 pin 5 Amps S/Socket point on independent board with 1.5 sqmm cable for earth, neutral and phase.
All as per item No 3.01 here-in-before but for 3 Pin socket outlet 5 Amps same board with other switches with cable 1.5 Sq mm size
S & F Modular type switch piano 6 Amps single pole one way one module all as specified and as directed. Make :- Havells / Anchor / Legrand /C&S
S & F Modular type switch piano 16 Amps single pole one way one module for 16A independent complete all as specified and as directed. Make :- Havells / Anchor / Legrand /C&S
S & F modular type Socket outlet 6 Amps 2/3 pin combined 2 module complete all as specified and as directed. Make :- Havells / Anchor / Legrand /C&S
S & F modular type Socket outlet 16 Amps-2/3 pin combined 2 module complete all as specified and as directed.Make :- Havells / Anchor / Legrand /C&S
S & F modular type electronic fan regulator flush type 230V, AC, 50 Hz not less than 100 W complete all as specified and as directed.
M&L for MCB SP 6A, 230V, 50 Hz, compatible for DIN rail "C" series In accordance with IS/IEC 60898-1-2002, 240 V, 50 Hz, 10 kA Suitable for Inductive loads complete with connection complete all as specified and as directed. Make: -C&S/Havells/L&T/ABB/Schneider
M&L for MCB SP 10A-20A, 230V, 50 Hz, compatible for DIN rail "C" series In accordance with IS/IEC 60898-1-2002, 240 V, 50 Hz, 10 kA Suitable for Inductive loads complete with connection complete all as specified and as directed. Make: -C&S/Havells/L&T/ABB/Schneider
M&L for MCB SPN 32A, 230V, 50 Hz, compatible for DIN rail "C" series In accordance with IS/IEC 60898-1-2002, 240 V, 50 Hz, 10 kA Suitable for Inductive loads complete with connection complete all as specified and as directed. Make: -C&S/Havells/L&T/ABB/Schneider
Supply and fix MCB protected POWER UNIT with one 25 amps socket, (incl 3 Pin Plug Top) including MCB DP and starter 25 Amps rating with six module plate and flush PVC box and electrically connecting up fixed complete all as specified and directed. Make Havells cat No- DHDUCDP0253016-25 (25 Amps) OR equivalent model in L&T / Panasonic / Hager / ABB / Legrand / Indo Asian
Supply and fixing distribution board (DB) SPN 12 ways, with neutral and earth bus bar 200 A rating 230 Volts, single door, recessed with wall surfaces by chase cutting and making good surfaces of wall complete all as specified and as directed by the Engr-in-Charge. Make: - C&S/Havells/L&T/ABB/Schneider
M &L for sub main wiring with PVC insulated (FR-LSH) cable standard copper conductor 1100 volts grade with two run of of size 2.5 sqmm multistrand unsheathed (Red/yellow blue colour cable used for live connection & Black colour cable used for neutral connection) and one run of 2.5 sqmm copper multistrand conductor 1100 volts grade PVC insulated (Green colour cable used) cable for earth continuity wire connected from main earth through PVC casing capping/PVC concealed conduit of size 25 mm for including of all accessories complete all as specified and directed. Note : i) Three runs of 2.5 sqmm cable with conduit pipe / casing caping shall constitute one unit Make of cable:- Havells / KEI / Polycab / RR Kabel Ltd. / HPL Make of PVC Conduit:- Richa Cables / AKG Industries / Harsh Electro Systems / Panasonic (Anchor)
M &L for sub main wiring with PVC insulated (FR-LSH) cable standard copper conductor 1100 volts grade with two run of of size 4.0 sqmm multistrand unsheathed (Red/yellow/blue colour cable used for live connection & Black colour cable used for neutral connection) and one run of 4.0 sqmm copper multistrand conductor 1100 volts grade PVC insulated (Green colour cable used) cable for earth continuity wire connected from main earth through PVC casing capping/PVC concealed conduit of size 25 mm for including of all accessories complete all as specified and directed. Note : i) Three runs of 4.0 Sqmm cable with conduit pipe / casing caping shall constitute one unit Make of cable:- Havells / KEI / Polycab / RR Kabel Ltd. / HPL Make of PVC Conduit:- Richa Cables / AKG Industries / Harsh Electro Systems / Panasonic (Anchor)
Supply and fix in repairs of surface & wall mounted LED Bulk head light fittings with 9/10 w indoor/outdoor luminaries with and including Electronic driver and LED lamp, pre-wired including necessary electric connection from ceiling rose to light fitting, complete all as specified and directed, conforming to the following specifications: - (i) System Watts/lumens: - 9 to 10 W/Total system lumen not less than 800 Lm. (ii) Housing: - Extruded polycarbonate/engineering plastic (iii) IP rating: - IP 65 (iv)Front cover: - PRISMATIC DIFFUSER. (v)Mounting: - Suitable for wall/ceiling mounting (vi)Finish: - Smooth finish (vii)Lamp: - SMD LED high bright (viii)Heat sink: - As per OEM's design Make:- C&S / Indiabulls LED / Crompton / Surya / Orient Electric Ltd. / HPL / Jaquar & Company Pvt Ltd / Eveready Industries India Ltd. / Havells
Supply and fix in repair of surface & wall mounted LED tube light fittings 4 feet with 18/20 w indoor luminaries with and including Electronic driver and LED lamp, pre-wired including necessary electric connection from ceiling rose to light fitting on existing point or new points complete all as specified and directed by the Engr-in-Charge, conforming to the following specifications: - (i) System Watts/lumens: - 18 to 20 W/Total system lumen not less than 2000 Lm.,(ii) Housing: - Extruded polycarbonate, (iii) IP rating: - IP 20, (iv)Front cover: - Acrylic/polycarbonate cover frosted, (v)Mounting: - Suitable for wall/ceiling mounting, (vi)Finish: - Smooth finish, (vii)Lamp: - high bright LED, (viii) System Effficacy (Im/watt):- Not less than 100 lm/watt, (ix) Colour temperature :- Not less than 5700K, (x) Colour rendering index(CRI):- Not less than 80, (xi) Life:- Not less than 25000 hrs of operation, (xii)Optics: Designed for optimum light distribution, (xiii) Control gear:- Inbuilt electronic driver with APFC, PF not less than 0.95, and THD not more than 20% of the standard operating voltage 180-270V AC, 50 Hz, (xiv) Surge Protection:- Inbuilt surge protection minimum 2 KV,(viii)Heat sink: - As per OEM's design Make:- C&S / Indiabulls LED / Crompton / Surya / Orient Electric Ltd. / HPL / Jaquar & Company Pvt Ltd / Eveready Industries India Ltd. / Havells
Supply and fixing in repairs LED ceiling light square or round profile with the following specifications: - (i) Wattage: - 9 to 12 Watts (ii) Supply: - 230V, AC, 50 Hz (iii)Shape: - square or round profile (iv)Type of cover: - Frosted (v)Nominal life time: - 25,000 Hrs (vi)Colour temperature: - 4500-6500K (vii)CRI index: - 80-90 (viii)Lumens: - Not less than 900 Lm (ix)Efficacy: - Not less than 80 Lm/Watt Make:- C&S / Indiabulls LED / Crompton / Surya / Orient Electric Ltd. / HPL / Jaquar & Company Pvt Ltd / Eveready Industries India Ltd. / Havells
S&F 1 x 34 / 36 watt, LED Panel light fitting, square shape (2ft x 2ft), suitable for recess mounting in ceiling, Epoxy white powder coated, die cast aluminium housing & opal acrylic diffuser, warm white color, 230 Volts, total system lumen 3600 Lm (minimum), CRI 80 (minimum), IP 20, PF 0.95 (minimum), THD 20% (Maximum), with integrated high effeciency electrnoic driver with APFC, inbuilt surge protection 2 KV (minimum), inlcuding electrically connecting and including taking down complete all as specified and directed. Make:- C&S / Indiabulls LED / Crompton / Surya / Orient Electric Ltd. / HPL / Jaquar & Company Pvt Ltd / Eveready Industries India Ltd. / Havells
S&F in repairs surface & wall mounted LED mirror light fittings decorative type with curve diffuser with 18/20/22 w indoor luminaries with and including Electronic driver and LED lamp, pre-wired including necessary electric connection from ceiling rose to light fitting, complete all as specified and directed, conforming to the following specifications:- (i)System Watts/lumens: - Max 18/20/22 W/Total system lumen not less than 2000 Lm. (ii)Housing: - Extruded polycarbonate (iii)IP rating: - IP 20 (iv)Front cover: - Acrylic/polycarbonate/glass cover (v)Mounting: - Suitable for wall/ceiling mounting (vi)Finish: - Smooth finish,(vii)Lamp: - High bright LED (viii)System Efficacy (lm/Watt): - Not less than 90 lm/watt (ix)Colour temperature: - Not less than 5700 K (x)Colour rendering index (CRI): - Not less than 80 (xi)Life:- Not less than 25000 hrs of operation (xii)Optics: - Designed for optimum light distribution with curve diffuser (xiii)Control gear: - Inbuilt electronic driver with APFC, PF not less than 0.95, and THD not more than 20% of the standard operating voltage 180-270V Ac, 50 Hz (xiv)Surge protection: - Inbuilt surge protection minimum 2 KV , (xv)Heat sink: - As per OEM's design Make:- C&S / Indiabulls LED / Crompton / Surya / Orient Electric Ltd. / HPL / Jaquar & Company Pvt Ltd / Eveready Industries India Ltd. / Havells
S&F in repair fan exhaust 300mm sweep, non-metallic blades with louver shutter, single phase heavy duty grey in colour all accessories with the provisioning rag bolts, nuts, washers etc. Any disturbed surfaces of wall shall be making good by cement work/plastering and matching by existing colour white/colour wash as well as writing the MES No with white colour paint including connection complete all as specified and directed. Make :- Havells / Orient / Ram Ratna Electricals Ltd (RRE)/Bajaj
S&F in repair ceiling fan 1200mm sweep, 230 volt, 50 Hz decorative type with squirrel cage motor copper winding 3 star rated all fixing accessories including connection complete all as specified and directed. Make :- Havells / Orient / Ram Ratna Electricals Ltd (RRE)/Bajaj
Taking down copper / aluminium concealed point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc., removing materials to store for keeping in safe custody or for taking credit, cutting chasing as required and making good the disturbed surfaces including finishes to match with adjacent surfaces of walls, floors, etc. complete all as specified and as directed.
Taking down copper / aluminium concealed sub main wiring complete with all fixture and fittings including cutting chasing as required and making good the disturbed surfaces including finishes to match with adjacent surfaces of walls, floors, etc. complete all as specified and as directed.
M & L concealed sub main wiring with 2 runs of 4 sqmm main wire along with 1 run of 4 sqmm earth wire (green in colour) single core FRLSH PVC insulated, unsheathed, multi-stranded, 1100 volts grade ISI marked copper conductor cable, drawn through and including adequate size rigid non-metallic PVC conduit (medium grade) with all fittings & accessories including cutting chases for conduits as required, sinking for terminal boxes, making good the disturbed surfaces including finishes to match with adjacent surfaces complete all as specified and directed. NOTE:- Two runs of main copper conductor, one run of earth wire and one run of PVC conduit shall be measured as one unit length. Make of cable:- Havells / KEI / Polycab / RR Kabel Ltd. / HPL Make of PVC Conduit:- Richa Cables / AKG Industries / Harsh Electro Systems / Panasonic (Anchor)
All as per item No. 3.26 above but with 2 runs of 6.0 Sqmm main wire along with 1 run of 6.0 Sqmm earth wire.
Taking down old unseviceable DB/TPN DB any size and any capacity including MCB/RCB/Isolator complete all as specified and as directed.
S&F MCB DB, SPN 12 way, IP-43, IK 09, double door type with metal door, with 100A copper neutral and earth bus bar for fixing MCB, fixing flush to wall & making good the disturbed surfaces complete all as specified and as directed. Make :- L&T / Havells / Panasonic / Hager / ABB / Legrand / Indo Asian (Optipro)
S&F ceiling rose, surface bakelite 65 x 50 mm three terminal complete all as specified and directed. Make:- L&T / ABB / Legrand / C&S
S&F MCB SPN 40 to 63 Amp, 10 kA, 240V 'C' curve complete all as specified and as directed. Make :- L&T / ABB / Legrand / C&S
S&F stepped type electronic fan regulator two module, with 5 step, AC 50 Hz 240 Volts grade complete all as specified and directed. Make :- Havells / Anchor / Legrand
S&F MCB SP 6 to 32 Amp, 10 kA, 240V 'C' curve complete all as specified and as directed. Make :- L&T / ABB / Legrand / C&S
S&F electric water heater, storage type steel body with steel inner tank and heating element upto 2 KW capacity 25 liter, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, etc complete all as specified and as directed. Make:- V-Guard / Bajaj / Usha / Crompton Greaves / Jaquar & Company Pvt. Ltd.
S&F 20 mm bore gun metal globe or gate valve with iron wheel head screwed both ends for iron pipe and fixed complete all as specified and directed. Make:- Kirloskar / Leader / Zoloto / Venus / Audco / Upadhyaya
S&F sheet metal enclosures with socket single pole and neutral enclosures with a two pin and earth plug and socket complete with one single pole MCB's of 20 Amps complete all as specified and as directed. Make :- L&T / Havells / Panasonic / Hager / ABB / Legrand / Indo Asian (Optipro)
S&F 12 watt LED bulb, inverter (backup) type, A19 shape with B22 base 230 Volts, battery with minimum 4 hrs backup time, frosted diffuser, suitable for surface mounting, total system lumen 900 Lm (minimum) on supply and 400 Lm (minimum) on battery, colour temperature 6500K (minimum), CRI 80 (minimum) complete all as specified and directed. Make:- Crompton / Century Led / Havells
S&F lamp holder, PVC/Polycarbonate type with cord grip cap suitable for pendant fittings including taking down complete all as specified and as directed. Make :- Havells / Anchor / Legrand
S&F LED light fitting 1 x 20 watt, 220V, AC PVC box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size for ceiling rose complete all as specified & directed. Make:- Crompton / Havells / Century LED ltd
M&L earthing complete with galvanised steel earth plate electrode of size 600 x 600 x 6 mm thick buried directly in ground in vertical position (earth pit not less than 2.25 m deep below the normal ground level) with top edge of the earth plate not less than 1.5 m below normal ground level, connected to galvanised earth lead wire of 4 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel, all as shown in electrical plate No. 3 connected to earthing test point and including dismantling complete all as specified and directed. Note:- The unit rate shall also include for earth work in any type of soil, PCC 1:3:6 type C1 chamber, RCC 1:1.5:3, type A1 cover slab, 50 mm thick reinforced with 8 mm dia TMT bar @ 140 mm C/C both ways, 10 mm dia plain bar lifting handle embedded in cover slab, 20 mm bore medium grade GI watering pipe, 15 mm bore GI light grade earth lead protection pipe, funnel, wire mesh, copper lugs, charcoal and common salt in alternate layer etc.
S&F earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit / pipe or fixed to poles or any other indicated situation for loop earthing etc. as required 4 mm dia galvanised iron or steel wire complete all as specified and directed.
S&F in repairs LED street / security light fitting 1 x 20 watt, integrated type with high efficiency electronic driver, pressure die cast aluminium housing & PC diffuser, Lumen Efficacy 100 Lm/Watt (minimum), colour temperature 5700K (minimum), CRI 70 (minimum), IP-65 (minimum), PF 0.90 (minimum), THD 10% (Maximum), in-built surge protection 5 KV (minimum) internally prewired and including electrically connecting with twin core twisting flexible cord of 0.75 sqmm copper conductor cable & all other necessary fixing accessories such as GI pipe light grade of 40 mm bore (or higher size as per manufacturer recommendation) & suitable length with MS flat iron clamps (clamps shall be 40 x 5 mm MS flat), nuts, bolts & washers including painting to GI pipe & clamps with two coat of aluminium paint over a coat of red oxide primer complete all as specified & directed. Make:- Crompton / HPL Century LED ltd
M/s TRIMURTI ASSOCIATE
ASHOK MUKHERJEE
METTLE WORKS
M/s Ranjit Kumar Saha
D K SARKAR
M/S TANDRA DEY.
G C DUTTA N CO
DAS AND GHOSH CONSTRUCTION
M/S A C PAUL
M/S RANEN PAL
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .