SPECIAL REPAIRS TO SEWAGE LINES FROM BUILDING NO P-81 TO P-96 AT NML AREA, PROVISION OF PVC WALL PANELLING IN EXCHANGE AND OPS ROOM AT HQ MAO IAF, CERTAIN REVENUE WORKS FOR B/R AND MINOR WORKS FOR B/R AND E/M UNDER GE WEST COLABA, MUMBAI

Amount

Demolition of reinforced cement concrete as in roof, beam, landings, chajjas and similar suspended works (reinforcement cut as to facilitate demolition) and removing debries out side MoD land complete all as specified and directed.

Material and labour for reinforced cement concrete of grade M-20, (using 20 mm graded stone aggregate) as in slabs supported on walls, beams and columns in floors, roofs, landings complete all as specified and directed.

Material and labour for mild steel TMT bars 8mm dia, cut to length, bent to shape required including cranking, bending and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

Material and labour for formwork to soffit of suspended slabs such as roof slabs, landings and similar work not exceeding 200 mm thick, horizondal or sloping for fair finished surface of concrete complete all as specified and directed.

All as per item no 4 above but edges of slabs not exceeding 20 cm wide complete all as specified and directed.

Material and labour for providing plain cement concrete type D-2, 1:4:8 (40mm graded stone aggregate), 100 mm thick in sub base complete all as specified and directed.

Material and labour for Non skid coloured ceramic tiles 7 to 8 mm thick area of each tiles exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over and including 15mm thick screed bed in CM (1:6) complete all as specified and directed. Make :- Kajaria / Euro tiles / HR Johnson, sample as approved by GE.

Material and labour for glazed ceramic coloured tiles 300x450x7 mm thick on vertical surfaces over and including 10 mm thick rendering on wall in CM (1:4) as backing coat, set in cement slurry and jointed in white cement and pigments complete all as specified and directed. Make :- Kajaria / Euro tiles / HR Johnson, sample as approved by GE.

Material and labour for roof top plastering 15 mm thick in cement mortar (1:3) using water proofing compound complete all as specified and directed.

Taking down cement plaster from brick or stone walls etc including racking out joints, hacking for key scrubbing down with water and removal of rubbish off the premises to out side MoD land complete all as specified and directed.

Material and labour for rendering 15 mm thick in cement mortar (1:4) on fair faces of brick work, concrete surfaces or inside outside wall of manhole with using water proofing compound complete all as specified and directed.

Material and labour for preparing newly plastered surfaces of walls and applying two coats of cement based paint over a coat of chalk whitening complete all as specified and directed.

Material and labour for preparing of new plastered surfaces and applying three coats of white wash on ceiling complete all as specified and directed.

Taking down chowkat or frame (without taking off shutter from the frame) not exceeding 1.5 Sqm each complete all as specified and directed.

Supply and fixing for Solid PVC door Frame of Size 50 x 47mm made out of 5mm thick plain colour PVC sheet reinforced with MS square tube fixed in position complete all as specified and directed.

Supply and fixing solid panel PVC door shutter 30mm thick (Style) consisting of frame made out of MS tubes for top & bottom rails MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top & bottom rail on either side & as gap insert for top rail & botom rail panneling of plain colour PVC sheet to be fitted in the MS frame welded /sealed to the stiles & rails with suitable PVC sheet beadding, and jointed together with solvent cement complete all as specified and directed.

Supply and fixing extruded aluminium alloy tower bolt of 200mm long complete all as specified and directed.

Supply and fixing mild steel butt hinges, medium weight, cold rolled and fixed in position of 100mm long complete all as specified and directed.

Supply and fixing extruded aluminimum alloy handle fabricated type of 150mm long complete all as specified and directed.

Supply and fixing in repairs vitreous china squatting pattern 'Orissa' pattern size 580mmx440mm white with integral footrest including connection to waste pipe and flush pipe complete all as specified and directed. Make:- Hindware / Prayag / Cera, sample as approved by GE.

Supply and fixing in repairs PVC valveless syphonic action type flushing cistern low level of 10 ltr capacity with inlet valve float and handle including bracket complete all as specified and directed. Make:- Hindware / Prayag / Cera, sample as approved by GE.

Supply and fixing in repairs PVC connection of 45cm long 15mm dia and fixed in position complete all as specified and directed.

Material and labour for PCC concrete bed to drain pipes (1:4:8) type D-2 (using 40mm graded stone aggregate) including packing under and haunching against the sides of pipes after they are laid and tested of 150mm dia complete all as specified and directed.

Material and labour Salt glazed stoneware drain pipes of 150mm dia bore, laid in trenches and jointed complete all as specified and directed.

Material and labour for cutting into existing manhole for connecting new drain making good to pipe and rendering cutting existing benching for and forming branch channel in cement concrete (1:2:4) type B-1 smooth finish and reforming benching as required of 150mm dia bore pipe complete all as specified and directed.

Supply and fixing Steel ventilator with top hung shutter including hinges with steel handle and steel peg stay with glazing bars (sample as approved by GE) complete all as specified and directed.

Supply and fixing 3mm thick figured glass in square not exceeding 0.5 Sqm in each pane glazing with oil putty complete all as specified and directed.

Supply and fixing in repairs Stop cock/angle cock cast copper alloy screwed down with high pressure crutch or butterfly handle screwed both ends for iron pipes of size 15mm dia complete all as specified and directed. Make:- Jaquar / Prayag / Cera, sample as approved by GE.

Supply and fixing in repairs bib taps cast copper alloy with crutch or butterfly handle screwed down with pipe of size 15mm dia complete all as specified and directed. Make:- Jaquar / Prayag / Cera, sample as approved by GE

Supply and fixing tubes medium grade galvanised including all necessary fittings 20mm dia fixed to wall / floors / laid in trenches including taking up or down old tubing and connections complete all as specified and directed.

All as per item No 30 above but for size 15mm dia.

Supply and fixing Salt glazed stoneware gully trap square/or rounded mounded of any type of size 150mmx150mm complete all as specified and directed.

Disconnecting existing water tanks of capacity exceeding 500 Ltr and not exceeding 1000 Ltr setting aside or lowering if required for repairs, cleaning etc. and hoisting if required, reconnecting and refixing in position complete all as specified and directed.

Material and labour for providing cement concrete type C-2, 1:3:6 (40mm graded stone aggregate), 75mm thick in plinth protection, finished even and smooth without using extra cement complete all as specified and directed.

Demolition of brickwork or stone boulders masonry built in cement mortar including all quoins, arches, pillers and removing debries to out side MoD land complete all as specified and directed.

Dismantling mild steel work of any description as in grills gates etc complete all as specified and directed.

Material and labour for brick work with Sub class 'B' brick, straight or curved on plan exceeding 6m mean radius built in CM (1:6) complete all as specified and directed.

Material and labour for framed work such as grills etc with ends of bars shouldred and or riveted or forged into spike; framed guard bars and all other similar work conforming to Fe-290, Gde - E-165 complete all as specified and directed.

Dismantling of floor hearth/wall tiles including cement mortar bedding (but not backing) and removing debries to out side MoD land complete all as specified and directed.

Dismantling plain or corrugated steel sheeting, any gauge or thickness as in roof / sunshade coverings complete all as specified and directed.

Supply and fixing mild steel rolled section as in rafters, purlins, posts and the like fixed with angle cleats and connecting plates etc of grade Fe-410 w complete all as specified and directed.

Supply and fixing pre painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in sunshades, roof covering/cladding to wall etc. fixed with self tapping screw complete all as specified and directed.

Material and labour for 15 mm thick plastering in cement mortar (1:6) on fair/ unfair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.

Material and labour for preparing newly plastered surfaces of walls and applying two coats of oil bound distemper over a coat of alkali resistant primer complete all as specified and directed.

Material and labour for complete removal of existing treatment over old surfaces of walls and applying two coats of oil bound distemper including priming with alkali resistant primer complete all as specified and directed.

Material and labour for preparation of new or old untreated steel surface of any description exceeding 10cm width or girth applying two coats of synthetic enamel paint over a coat of alkyd anti corrosive primer complete all as specified and directed.

Material and labour for preparation of old painted steel surfaces of any description not otherwise described over 10cm in widht or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

Material and labour for Granite (of any type and size) 20mm thick machine cut, polished (sample as approved by GE), bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone over and including 15mm thick screed bed in CM (1:4) on kitchen platform, Cill of Window / Ventilator / flooring / border etc including rubbing, grinding and polishing complete all as specified and directed.

Supply and fixing Powder coated ( any shade approved by GE ) aluminium frame/shutter for door, window, ventilator and for partition of any type including sliding/hunge type all as directed with one more rebates including fabrication of frame/shutters and fixing to wall with necessary lugs, cleat etc including all accessories such as glazing clips and rubber beading for fixing of glass panes hinges etc complete all as specified and directed, Note:- Glass panes will be measured and paid seperately.

Supply and fixing sheet glass 5.50 mm thick ordinary quality in square not exceeding 0.5 sqm in each pane and fixed with rubber beads complete all as specified and directed.

Excavating in trenches not exceeding 1.50m wide and not exceeding 1.50m in depth for foundation, drain pipes, sewage lines etc and getting out in soft loose soil complete all as specified and directed.

Material and labour for brick work with sub class 'B' brick straight or curved on plan exceeding 6 m mean radius built in CM (1:4) complete all as specified and directed.

Supply only integral water proofing liquid admixture complete all as specified and as directed.

Demolition and breaking up 100 mm drain pipe (SGSW, AC or RCC) set in cement mortar complete all as specified and directed.

Demolition and breaking up 150 mm drain pipe (SGSW, AC or RCC) set in cement mortar complete all as specified and directed.

Demolition of cement concrete un-reinforced in any position including PCC flooring over sewage line and paving not exceeding 15 cm thick above or below ground level, including removing debries to out side MoD land complete all as specified and directed.

Material and labour for cement concrete (1:2:4) type B-2 (using 40mm graded stone aggregate) in hardstanding / floors, 75 mm thick, finished even and fair without using extra cement complete all as specified and directed.

Material and labour for Plain cement concrete M-15 (Nominal Mix) using 20 mm graded crushed stone aggregate in lintels upto 1.5 m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs, slab staging for water tanks and the like including weathering, slightly rounded or chamfered angles and throating including use of necessary formworks complete all as specified and directed.

Material and labour for plain cement concrete (1:2:4), type B-2 (40mm graded stone aggregate) in foundations, filling and mass concrete complete all as specified and directed.

Material and labour for 200 mm bore (internal dia of pipe) reinforced concrete pipes, Class NP3 laid in trenches and jointed with CM (1:1) complete all as specified and directed.

Material and labour for PCC (1:3:6) type C2, (using 40 mm graded stone aggragate) as in concrete bed to 200 mm bore drain pipe including packing under and haunching completely surrounding pipes with concrete after laying pipes and testing complete all as specified and as directed.

Material and labour for 150 mm bore (internal dia of pipe) reinforced concrete pipes, Class NP3 laid in trenches and jointed with CM (1:1) complete all as specified and directed.

Material and labour for PCC (1:3:6) type C2, (using 40 mm graded stone aggragate) as in concrete bed to 150 mm bore drain pipe including packing under and haunching completely surrounding pipes with concrete after laying pipes and testing complete all as specified and as directed.

Returning, filling in, including spreading, leveling, watering and well ramming in layers not exceeding 25 cm complete all as specified and directed.

Removing excavated (soil) materials and deposited out of MoD land upto a distance of 25 km complete all as specified and directed.

Material and labour for Factory made CI Manhole cover, heavy duty , single seal comforming to Fe-150 IS -210-1978 including 2 sets of manhole cover lifting and unlocking key to suit each other type manhole cover (sample as approved by GE) complete all as specified and directed.

Supply and fixing Rolled mild steel angle iron frame work such as in manhole cover etc with ends of bar solded and revited etc in all respects complete all as specified & directed.

Supply and fixing Solid PVC wall panelling consisting of 5 mm thick PVC sheet (any shade and colour as per sample approved) inclusive fixing at site on PVC frame work complete all as specified and directed.

Supply and fixing 5 mm thick PVC sheet fillet of width 35 mm for wall panelling inclusive of fixing to wall to make PVC frame complete all as specified and directed.

Supply and fixing anti rusting Stainless steel unik cloth drying hanger made of 16mm dia stainless steel rod, 8 feet x 6 rods set for heavy duty. Make : Unik cloth dry hanger / Easy dry or equivalent as approved by GE, including fixing on ceiling with metal roof clamps complete all as specified and directed.

Taking down Old ceiling fans and deposited to MES Store yard of AGE E/M complete all as specified and directed.

Supply and fix five star rating ceiling fan 1200 mm sweep, 240 Volts, 50Hz AC supply complete white colour with 3 blades and all required accessories i.e. down rod one metre long made out of 15mm bore GI pipe, heavy grade, ISI mark and anchor fasterner with D hook alongwith "S" type hook, drilled and countersunk for screw, as necessary, nut, bolt with washer etc. for fixing / hanging, marking MES Number on fan complete all as specified and directed. Make : Havells Cat Pt No ES-40 or equivalent model in Orient / Khaitan, Sample as approved by GE.

Material and labour for point wiring in repair, concealed type and including rigid non-metallic PVC heavy duty conduite of 20/25 mm dia size, cutting chases for sinking for concealed boxes for wiring with 1.5 sqmm FRLSH PVC insulated, unsheathed, multi stranded copper conductor cable single core, 1100 volts grade with flush type metal boxes suitable for fixing switches, sockets and fan regulator etc., white or any colour cover plate with brass screws and cup washers including PVC insulated unsheathed multi stranded copper conductor cable of 1.5 sqmm as an earth wire connected to common earth and earth dolly as per IS specification and as specified in SSR Part-I complete for one ceiling fan controlled by one switch & regulator, making good to the disturbed surfaces to match the existing surfaces (fill up cement in gaps, finishing with putti and apply two coats of paint to match with existing colour in disturbed surface area) complete all as specified and directed. Make of wire : Polycab / Havells / Anchor / Finolex, as approved by GE.

Material and labour for point wiring for light point in and including rigid non-metallic PVC heavy duty casing capping, 19/20 mm dia suitable size including sinking for boxes wiring with 2 x 4.0 sqmm 1100 volts grade FRLSH PVC insulated, unsheathed, multistranded copper conductor cable single core, 1x 4.0 sqmm as an earth wire connected to common earth and earth dolly as per IS specification and as specified in SSR Part-I complete for one AC point controlled by one switch all as specified and as directed.

Supply and fixing Switch piano, flush type, single pole, one way 5 Amp complete all as specified and directed. Make : Anchor / Fine / SSK, sample as approved by GE.

Supply and fixing switch socket combination 2 in 1, 3 pin, 5 and 15 Amp flush type, universal complete all as specified and directed. Make : Anchor / Fine / SSk, sample as approved by GE.

Supply and fixing stepped type electronic fan regulator 450 watt flush type on the existing phenolic laminated sheet etc. complete all as specified and as directed. Make : Anchor / Fine / SSk, sample as approved by GE.

Supply and fixing ceiling rose surface bakelite 65 x 50 mm two to three terminals complete all as specified and directed. Make: SSK / Anchor / Kinjal / Fine, sample as approved by GE.

Supply only Diesel Engine with 3x3, self priming pump set 5 HP capacity complete all as specified and directed. Make : Model No 8413 of Crompton Greaves or equivalent in Honda, sample as approved by GE.

Supply only Semi rigid PVC suction pipe of size 80 mm, 7.5 m long complete all as specified and directed.

Supply only cotton delivery pipe of size 80 mm dia, 20 m long complete all as specified and directed.

Supply only PVC foot valve of size 80 mm dia complete all as specified and directed.

Supply only MS hose clamp for 80 mm dia pipe complete all as specified and directed.

Supply only PVC holse nipple of size 80 mm dia complete all as specified and directed.

Supply only clear water submersible sewage pump single phase 220 V, 50 Hz, of capacity 2.5 HP, 6-10 mtr head, 33-120 LPM discharge capacity. Make : Kirloskar Model No Eterna 1800 BW or equivalent in KSB, Jyoti, Sample as approved by GE.

Supply only reinforced rubber lined fire hose reel 63mm dia, 30 metre long conforming to IS 6363-1988 (Type -A) complete all as specified and directed.

Supply and install water heater storage geaser type 25 Ltr capacity 5 star rating complete all as specified and directed. Make : Monza DX model product Code No GHWAMGTWH025 in Havells or equivalent in Racold / Venus / Usha, Sample as approved by GE

Supply and fixing galvanised iron pipe, medium grade of 15 mm bore including all fittings and cutting/making thread to the existing GI pipe for insertion of new tees/sockets etc fixed to walls/ceiling/floors by means of clamps complete all as specified and directed.

Supply and fixing Stop valves of size 15 mm, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions fixed complete all as specified and directed. Make : Jaguar / Prayag / Cera, Sample as approved by GE.

ASHOK CONSTRUCTION

Frends Enterprises

Bidder Name

Frends Enterprises

ASHOK CONSTRUCTION

RAJU AND CO