Providing Special repair to EI and Street Light in Bus Stand at Pundri Distt. Kaithal

Amount

Supply and erection of PVC copper insulated and sheathed 2-core circular flexible wire. 31.9 (i) e Size 2.50 sqmm ( 80 / 0.20mm).

Supply and erection of metal clad switches / B.D.Bs with rag bolts on wall or on existing angle iron board / pedestal including bonding to earth and necessary connections . Triple pole switch with neutral link 32 amp. 415 Volts. 31.12(a) (xiv) Cat-B.

Supply and erection of moulded case circuit breakers on wall or on existing pedestal including bonding to earth and necessary connections. 15 amp.to 60 amp. 415 V ,10 KA 3-phase. 31.12 c (i)

100 amp.to 220 amp.415 V,10 KA 3-phase. 31.12 c (ii)

Supply and erection of sheet steel enclosures distribution boards suitable for MCBs etc. on wall/ existing boards / pedestal with rag bolts including bonding to earth. SPN Distribution board 8-way.31.12(D ) (vi)

Supply and erection of M.S. angle iron frame duly welded for housing M.S. sheet & main switches etc. on it, fixed on wall by means of suiteble size of rag bolts with cement concrete ,duly painted with three coats of approved paint including one coat of red oxide. Size 40 mm x 40 mm x 6 mm. 31.13(ii)

Supply and erection of 3 mm thick mild steel sheet duly welded on existing M.S. angle iron frame for fixing the main switches etc. as required, duly painted with three coats of approved paint including one coat of red oxide. 31.14 (i)

Supply and erection of sheet steel enclosure 2 pole / 3 pole with earth plug and socket suitable for incorporating single pole / triple pole MCB on wall / on existing pedestal complete with necessary connections etc. S.P.N. enclosure for single pole MCB 20 amp. 31.15 (ii)

Supply and erection of blanking sheet in existing distribution board. 31.16 (i)

HSR 31.17 Supply and erection of miniature circuit breaker / isolator 240 /415 V in the existing distribution board including making necessary connections. SP MCB of 9 KA breaking capacity 6 amp. to 32 amp.

SPN MCB of 9 KA breaking capacity 6 amp. To 32 amp.

TPN MCB of 9 KA breaking capacity 6 amp. to 32 amp.

TPN MCB of 9 KA breaking capacity 40 amp. to 63 amp.

Call bell 220 / 230 volts A.C. bakelite with double coil. 31.18 (vii)

Bakelite angle / straight button holder large size.31.18 (xi)

Switch 5 amp. On existing sheet.31.18 (xii)

Wall socket 5 amp. On existing sheet.31.18 (xiii)

Erection only of 1x40 watts or 2x40 watts 1220 mm long / 1x20 watts or 2x20 watts ,610 mm long fluorescent tube fitting directly on wall including necessary connections with 0.75 sqmm ( 24 / 0.20 mm ) PVC copper flexible cable for connecting the tube with the adjecent point. 31.18 (xxiv)

Erection of ceiling fan complete with necessary earthing of fan and regulator including carriage from local railway station /goods transport /PWD store to the site of work. 31.20 (i)

Erection of exhaust fan complete with necessary earthing of fan and regulator including carriage from local railway station /goods transport /PWD store to he site of work. 31.20 (iii)

Erection of cabin fan complete with necessary earthing including carriage from local railway station /goods transport /PWD store to the site of work. 31.20 (iv)

Pdg. and fixing of required size of deodar wood frame of section 50 mm x 32 mm for fixing exhaust fan upto 450 mm sweep. 31.20 (vi)

Supply and erection of pipe for wiring purposes including bends inspection boxes etc. where necessary and painting as required. 31.21 (xiv) Galvanised iron pipe 65 mm dia on flushed.

Heavy guage welded conduit pipe 20 mm dia 1.60 mm thickness on surface. 31.21 (xv)

Heavy guage welded conduit pipe 25 mm dia 1.60 mm thickness on surface. 31.21 (xvi)

Heavy guage welded conduit pipe 20 mm dia 1.60 mm thickness flushed. 31.21 (xxi)

Heavy guage welded conduit pipe 25 mm dia 1.60 mm thickness flushed. 31.21 (xxii)

Earthing with GI earth pipe 4.5 m long and 40 mm dia with masonry enclosure on the top etc. as required . 31.22(i)

Extra for using salt and charcoal / coke for pipe earth electrode as required. 31.22(ii)

Supply and erection of 20 mm x 3 mm thick G.I. tape fixed with suitable G.I. stapples of same size. 31.22(xix)

Supply and erection of under ground cable ,loose in existing pipe or trenches complete with necessary connections. 10 Sq. mm 2 Core Cable . 31.26 (iv) Ard.

16 Sq. mm 4 Core Cable . 31.26 (xI) Ard.

25 Sq. mm 4 Core Cable . 31.26 (xIi) Ard.

Supply and erection of suitable compression type brass cable glands for underground Cable. 31.28 (ii) 10 Sqmm to 16 Sqmm Cable 2 to 4 Core .

25 Sqmm to 50 Sqmm Cable 2 to 4 Core. 31.28 (iii)

Supply and erection of 32 mm dia meter 1.5 metre long bracket ( B-Class ) making an angle of 10 to 15 degree with horizontal plane for mounting street light fitting fixing of GI bracket on wall with 2 Nos. , 32 mm x 3 mm thick MS clamps including the cost of cutting , welding of GI pipe complete with cement sand mixture , bolts and nuts etc. including necessary connections. 31.30 (III) ( xv )

Supply and erection of prestressed cement concrete pole as per IS : 1678-1960. 31.30 (VI) 11 metres long 152 mm x 203 mm at top and 152 mm x 368 mm at bottom with working load of 360 Kg. burried 2.20 m in ground. 31.30 (VI) (iii)

Supply and erection of Godrej Almirah type M.S.pedestal of size 750 mm wide , 1200 mm high ,300 mm deep and bottom totally open , duly embeded in cement concrete block of size 900 mm x 450 mm x 200 mm above ground level duly plastered with 12 mm thick 1:4 cement plaster , having a base of size 1050 mm x 600 mm x 250 mm below ground level . 31.33 (iii)

Supply of M.S.pipe (B-Class) for suspension rod of ceiling fan including threading if required. 31.35 (i) 20 mm dia .

HSR 31.38 Wiring only in 1.5 Sqmm PVC insulated copper conductor cable in existing conduit pipe and MS boxes covered with 5mm thick bakelite sheet including cost of switch, wall socket, ceiling rose etc. Fan Point Medium Point

Long point.

Light Point Short point

Medium Point

Long point.

Twin control light point with 2 way, 5 amp. single pole switch. Long point.

Call bell point Long point.

3 pin 5 amp. plug point including earthing the 3rd. pin etc. Short point

Medium Point

Long point.

3 pin15 amp. plug point with 4 sq mm PVC insulated Copper conductor cable- including earthing the 3rd. pin etc. Medium Point

Long point.

HSR 31.40 Supply and erection of PVC unsheathed copper conductor cable single core 1100 volts grade in pipe of suitable size excluding cost and erection of pipe Size 1.5 sqmm

Size 2.5 sqmm

Size 4 sqmm

Size 10 sqmm

HSR 31.41 Supply and erection of Double door sheet steel enclosure distribution boards suitable for MCB's & ELCB's recessed in wall including bonding to earth complete with all labour and material required to complete the job in all respect up to the entire satisfaction of the Engineer-in-charge of the work. 4-way , TP&N ( Horizontal) (8+12)

8-way , TP&N ( Horizontal) (8+24)

HSR 31.48 Supply and erection of MS Saddle and clamps duly galvanised , on wall / RCC parapit for fixing underground cable at a distance of 0.60 metre center to center fixed by means of rawl plug including the cost of all labour and material required to complete the job in all respect and upto entire satisfaction of the Engineer-in-charge of work.

HSR 31.51 Supply and erection of MS stand made of 50mmx50mmx6mm angle iron frame and 150cm long, 30cm wide with MS sheet covering size 30cmx30cm 3.15mm thick fixed on the top of board & legs duly embedded in 1:2:4 cement concrete block 30cm below ground level including the cost of cement sand, welding, painting & fabrication charges etc. up to the entire satisfaction of Engineer - in - charge of the work.

HSR 31.55 Supply & erection of Socket size rotary step type Electronic regulator for A.C. ceiling fan Anchor make Delux model No. 50440 ISI / SSK make PC 561 operated on 120/280 V A.C. Supply complete including cutting of existing Bakelite sheet and making necessary connection etc. up to the entire satisfaction of the Engineer-in-Charge of the Work.

HSR 31.67 S/E of mark double walled corrugated (DWC) HDPE pipe laid 1 mtr. below ground level including diging and refilling of earth including cost of suitable size socket / cuppler for HDPE pipe including the cost of labour and material required to complete the job in all respect upto the entire satisfaction of Engineer-incharge of the work HDPE pipe 90 / 75mm outer dia / inner dia.

HSR 31.68 Supply & Erection of Hot Dip Galvanized octagonal pole of 3 mm thickness, with base plate including cost of nut and bolts and all accessories as supplied by the manufacturer including cost of foundation accessories etc. The foundation bolts as per manufacturer design should be hot dipped galvanized pole complete with door locking arrangement. Terminal plate consisting of 2 Nos. 100A. 4 pole natural links including connection etc. with suitable connecting arrangment for 2 no. MCBs / kit kat including cost of R.C.C. 1:1.5:3 for foundation of size 0.7 M. x 0.7 M. x 1.8 M with minimum 8 Nos. 12mm dia longitudinal MS reinforcement rods with rings of 8 mm dia not more than 200mm C.C. for fixing the pole with all labour & material required to complete the job in all respect upto the entire satisfaction of Engineerin-charge of the of the work. 8 Mtr. Long pole with top dia 70mm and botom dia 135mm with base plate of size 225 x 225 x 16mm.

HSR 31.69 Supply and erection of module case circuit breaker single pole/ 4 pole on wall /on existing pedestal including bounding to earth and making necessary connection required to complete the job in all respect up to the entire satisfaction of the Engineer-in-charge of the work. 4 pole MCCB 100 amp

HSR 31.76 Supply and erection of metal clad bus bar chamber made from 1.6 mm thick M.S.sheet fixed with rag bolts on wall or on existing pedestal / angle iron frame including bonding to earth Copper bars 63 amp. 415volt 4 bars of 325mm each (Cross section 20x3mm) duly tinned over all size of the chember 375mmx295mmx140mm.

HSR 31.77 Digging & Refilling of trench 30 cm below ground level for erection of pipe / cable (up to deapth of 1 P/M) underground cable excluding the cost of cable /pipe complete in all respect.

HSR 31.83 (i) Supply, installation, Testing and commissioning of 12.5 Mtr. long High Mast manufactured from B.S.E.N. 10025 or equivalent grade material in, 2 (two) section hot dip, galvanized inside and outside in single dip, suitable for wind velocity as per IS 875 Part-3 suitable for 6 Nos. Luminaire loading fully motorized with starter & cable complete along with standard accessories supplied by the manufacturer with 3 nos. steel wire rope double drum system and twin dome aviation light with LED without foundation but including cost of set of foundation nut and bolts, installation at site complete in all respeect upto entire satisfaction of Engineer-in-Charge. Thickness of Top Section = 3mm (Minimum) Bottom Section =3mm (Minimum) Top Dia = 150mm Bottom Dia = 360mm Thickness of Galvanization Top = 65micron (Min.) Bottom = 85micron (Min.)

Supply & Erection of single arms / double arms / four arms bracket made of 40mm dia GI pipe B class ISI 1.50 mtr. Long with GI coller pipe (GI) 75mm dia 60cm Long top covered with ornamental cap duly welded, painted 2 coats of aluminium paints on bracket and golden paint of ornamental cap including the cost of labour and petty material etc. complete in all respect upto the entire satisfaction of Engineer-incharge. Single Arm

Double Arm

Supply, erection and commissioning of Timelite 40A. 3 pole / 230V Digital time switch Indo Asian make automatic Timer ON/OFF the street light, pillars, wall, MS pedestal where ON/OFF point is available cabinet is fabricated from 22 gauge MS sheet painted, wiring, connection ON/OFF from the bottom of the cabinet the lite DB IP 54 protection complete with Digital timer, 32A. TPN MCB (Indo-Asian), fuse unit, indication lamp suitable for switch from rectifier system, switching system Bakelite connector 32A. Digital timer, auto / manual system, time setter, fiber sheet rubber & plastic components, wiring & component fitting, chemical (Epoxy) including the cost of labour and petty material etc. complete in all respect upto the entire satisfaction of Engineer-in-charge of the work.

Construction of RCC foundation for 12.5 / 16 / 20 mtr. high mast complete in all respect as per the appended design including the cost of digging sand filling 6" lean concrete 1:8:16 / bricks souling, Bar binding cement concret (M-20) shuttering, fixing of foundation bolts, refilling, carrying and erection of High Mast on foundation including petty material to complete the job in all respect up to the entire satisfaction of Engineer-in-Charge of work. (Foundation bolts and template to be supplied by department).

Supply and erection of MS box of size 8'' x 10'' x 4'' (20cmx25cm) and 10cm deep made of 1.6mm thick M.S. sheet covered with 5mm thick bakelite sheet for fixing of 4 Nos. socket and switch of 6 amp. and one No. of multi socket and switch of 15 amp. including fixing of one No. fuses unit and indicator off another make. the M.S. box is recessed in wall including cost of necessaru cement and mixture required to complete the job in all respect upto entire satisfaction of the Engineer-in-charge of work.

S/E/T/C of LED Street Light 90 Watt Luminiaries with pressure fie cast aluminium housing with lens and accessories required to complete the job in all respect inculding erection on existing pole for fixing including connection of the same upto the entire satisfaction of Engineer-in-charge of the work. Make as per approved list attached.

S/E/T/C of 120 watt LED Flood Light Luminiaries @ 120 lumen per watt. with pressure fie cast aluminium housing with lens and accessories required to complete the job in all respect inculding erection on existing pole for fixing including connection of the same upto the entire satisfaction of Engineer-in-charge of the work. Make as per approved list attached.

S/E/T/C of 150 watt LED Flood Light Luminiaries of @ 150 lumen per watt. with pressure fie cast aluminium housing with lens and accessories required to complete the job in all respect inculding erection on existing pole for fixing including connection of the same upto the entire satisfaction of Engineer-in-charge of the work. Make as per approved list attached.

N.K.Enterprises