ADDITION ALTERATION TO BUNGLOW NO. 26 AND 27, 2 AND 7 AND BLDG NO D-19 AT COLONEL POINT AND NECKLACE AREA UNDER GE I RnD PASHAN PUNE

Amount

Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc, complete and stacking within 50 metres lead, of area 3 sq. metres and below, complete all as specified and directed.

Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead, of area 3 sq. metres and below, complete all as specified and directed.

Dismantling stone slab flooring laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 metres lead, complete all as specified and directed.

Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead, complete all as specified and directed.

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead, for thickness of tile 10mm to 25 mm, complete all as specified and directed.

Material and labour for Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc, 40 mm thick (with 20 mm nominal size stone aggregate), complete all as specified and directed.

Providing and laying Ceramic floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS:15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc, complete all as specified and directed.

Providing and laying Ceramic floor tiles of size 400x400 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS:15622, of aproved make, in colours White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc, complete all as specified and directed.

Providing and laying double charged vitrified tile polished finish of size Tile 600 x 600 mm (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc, complete all as specified and as directed.

Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc, complete all as specified and directed.

Material and labour for glazed, coloured ceramic tiles in verticle surface of size 450x350x7mm / 350x250x7mm thick set and joined in neat cement slurry and pointed in cement slurry and pointed in white or coloured cement to match over 10mm thick cement plaster in CM 1:3, complete all as specified and directed.

Providing and laying Polished Granite stone flooring in required design and patterns, colour of Black, Cherry / Ruby Red or equivalent, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. complete all as specified and as directed.

Providing and laying Stone tile of Granite any colour and shade (polished) work for wall lining, riser, vertical surface etc., over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and cement slurry @ 3.3 kg/sqm including pointing in white cement,complete all as specified and directed.

Material and labour for edge moulding to 18 mm thick Granite work in kit counters, Vanities, steps etc., including machine polishing to edge to give high gloss finish etc, complete all as specified and directed.

Material and labour for polishing of existing terrozo tile by rubbing with grinding machine including using 220-350 grit carborundum stone repair & filling of joints, cement with pigment to match the existing tile washing thoroughly and finally polishing with bee wax polish, complete all as specified and directed.

Material and labour for polishing of existing terrozo tile dado/skirting by rubbing with grinding hand machine including using 220-350 grit carborundum stone repair & filling of joints, cement with pigment to match the existing tile washing thoroughly and finally polishing with bee wax polish, complete all as specified and directed.

Providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings, (Glazing and wiremesh to be paid for separately), complete all as specified and directed.

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings. (Cost of aluminium snap beading shall be paid in basic item), With float glass panes of 4.0 mm thickness (weight not less than 10kg/sqm), complete all as specified and directed.

Providing and fixing for fly proof stainless steel wire cloth of grade 304 wire gauge with 0.5 mm dia wire and 1.4mm wide aperture with matching as in door, window, ventilators etc, complete all as specified and directed.

Providing and fixing 20mm dia chromium plated brass curtain rod having wall thickness of 1.25mm with two chromium plated brass brackets fixed with C.P. brass screws and PVC sleeves etc, wherever necessary complete all as specified and directed.

Dismantling wooden boardings in lining of cupboards, kitchen shelves, walls and partitions, excluding supporting members but including stacking within 50 metres lead complete all as specified and directed.

Suppy and fixing 12 mm thick pre-laminated particle board (decorative lamination on both sides) grade -1, medium density flat pressed, three layer particle board FPT- I or graded wood particle board FPT- I, conforming to IS : 3087, bonded with BWP type synthetic resin adhesive as per IS : 848 and prelaminated conforming to IS : 12823, Grade1, Type - II marked, complete all as specified and directed.

Providing and fixing for 35mm overall width M.S. Piano hinges ISI marked IS: 3818 finished with nickel chromium plating grade I as per IS: 1068 and fixing with necessary screws etc, complete all as specified and directed.

Providing and fixing chromium plated brass 50 mm cupboard or wardrobe knobs with nuts, complete all as specified and directed.

Providing and fixing oxidised M.S. hasp and staple (safety type), of size 115mm conforming to IS : 363 with necessary screws etc, complete all as specified and directed.

Providing and fixing M.S. grills of required pattern in frames of windows etc, with M.S. flats, square or round bars etc, including priming coat with approved steel primer, Fixed to steel windows by welding,complete all as specified and directed.

Material and labour for preparation of steel surfaces and applying painting with synthetic enamel paint of approved brand and manufacture to give an even shade, Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture, complete all as specified and directed.

Providing and fixing factory made P.V.C. door frame of size 50x47 mm with a wall thickness of 5 mm, made out of extruded 5mm rigid PVC foam sheet, mitred at corners and joined with 2 Nos of 150 mm long brackets of 15x15 mm M.S. square tube, the vertical door frame profiles to be reinforced with 19x19 mm M.S. square tube of 19 gauge, EPDM rubber gasket weather seal to be provided through out the frame. The door frame to be fixed to the wall using M.S. screws of 65/100 mm size, complete as per manufacturer’s specification, complete all as specified and directed.

Providing and fixing factory made panel 30mm thick PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19 mm x 19 mm for styles and 15x15 mm for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture. M.S. frame covered with 5 mm thick heat moulded PVC 'C' channel of size 30 mm thickness, 70 mm width out of which 50 mm shall be flat and 20 mm shall be tapered in 45 degree angle on both side forming styles and 5 mm thick, 95 mm wide PVC sheet out of which 75mm shall be flat and 20 mm shall be tapered in 45 degree on the inner side to form top and bottom rail and 115 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered on both sides to form lock rail. Top, bottom and lock rails shall be provided both side of the panel. 10 mm (5 mm x 2 ) thick, 20 mm wide cross PVC sheet be provided as gap insert for top rail & bottom rail, paneling of 5 mm thick both side PVC sheet to be fitted in the M.S. frame welded/ sealed to the styles & rails with 7 mm (5 mm+2 mm) thick x 15 mm wide PVC sheet beading on inner side, and joined together with solvent cement adhesive. Anadditional 5 mm thick PVC strip of 20 mm width is to be stuck on the interior side of the 'C' Channel using PVC solvent adhesive etc, complete all as specified and directed.

Providing and fixing aluminium tower bolt of size 150mm x 10mm, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc, complete all as specified and directed.

Providing and fixing for stainless steel butt hinges of size 100x58x1.90 mm, with stainless steel screws etc, complete all as specified and directed.

Providing and fixing aluminium handles, 100mm size, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc, complete all as specified and directed.

Providing and fixing for Sal wood, in wood work for frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately), complete all as specified and directed.

Providing and fixing for 35 mm thick, ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters, including ISI marked Stainless Steel butt hinges with necessary screws, complete all as specified and directed.

Providing and fixing for aluminium tower bolts of size 200 x 10 mm ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc, complete all as specified and directed.

Providing and fixing for aluminium sliding door bolts of size 300 x 16 mm , ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc, complete all as specified and directed.

Providing and fixing for stainless steel butt hinges of size 100x58x1.90 mm IS : 12817 marked with stainless steel screws etc, complete all as specified and directed.

Providing and fixing for aluminium handles, of size 125 mm ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc, complete all as specified and directed.

Providing and fixing for aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc, Single rubber stopper complete all as specified and directed.

Material and labour for preparation of new wooden surfaces, Painting with synthetic enamel paint of approved brand and manufacture to give an even shade Two or more coats on new work, complete all as specified and directed.

Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material with in 50 meters lead, complete all as specified and directed.

Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections (galvanized @120 grams/ sqm, both side inclusive) consisting of main "T" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross "T" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main "T" at 600 mm center to center to form a grid of 1200x600 mm and secondary cross "T" of length 600 mm and size 24 x 25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24 x 24 x 0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc.

Main "T" runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings, complete all as specified and directed.

Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead, Nominal concrete 1:2:4 as in roof padding concrete or richer mix (i/c equivalent design mix), complete all as specified and directed.

Material and labour for cement concrete 1:2:4 type B0 using 12.5 mm graded stone aggregate as in levelling / padding course on roof slab, chajjas, projections on similar surfaces existing with slope, kerbs, rounded or chamfered edges, making the surface even and smooth without using extra cement, including using liquid water proofing compound, complete all as specified and directed. Note: supply of Integral water proofing compound will measured and paid seperately.

Material and labour for 12 mm cement plaster of mix : 1:4 (1 cement: 4 fine sand) over PCC (while concrete is green) using approved liquid water proofing, Note: supply of liquid water proofing compound will measured and paid seperately and dosage as per manufacturer instructions, complete all as specified and directed.

Supply only liquid water proofing compoud complete all as specified and directed.

Material and labour for Porous concrete surfaces to be primed with Nitoproof WB primer. Providing and applying Fosroc Nitoproof 600 PF of Fosroc chemicals a single component pitch free polyurethane based coating that cures by reaction with atmospheric moisture to form a tough but flexible waterproofing membrane. It is elastomeric, seamless waterproof membrane applied in 2 coats to achieve DFT 1.5 mm thick having a elongation capacity of over 600%. Termination to be done on wall extending the coating to min.300mm height above the finished floor level and sealed inside the groove of 20mm widex10mm thick flushed with polymer modified mortar as per vendor recommendation. Laying 200gsm non woven geo textile membrane over Nitoproof 600 PF coating with overlap sealed using synthetic rubber adhesive before providing screed concrete. The material shall achieve following properties: Elongation (ASTM D412) : 600 %, Specific gravity : 1.50 + 0.1 g/cc, Solid content : 85% min., Tensile strength (ASTM D412): 2.5 N/mm2, Crack bridging (ASTM C836) > 2mm Tear resistance (ASTM D624) : 15 kN/m, Water vapour transmission (ASTM E96) : 0.6 g/m²/hr., Water permeability @ 5 bar : Nil, Shore A hardness (ASTM D2240) : 60, Adhesion in-peel test (ASTM C836) > 50N, complete per manufacturer specification, complete all as specified and directed.

Note :- Including the following preparatory works. i) Thorough cleaning work, removal of loose screed, repairing the damaged portions and filling any minor potholes with polymer modified mortar using Fosroc Nitobond SBR Latex mixed with cement and quartz sand in the ratio of 3 litres per bag of cement. ii) Providing and laying coving at the junction of slab and vertical offsets with Cement Mortar 1:4 and admixed with Nitobond SBR Latex at dosage of 3 Ltrs per 50kg of cement as per manufacturer's specification. iii) Filling the annular space between concrete surface and rain water PVC pipe using non shrink grout after preparing the surface using sand paper and application of Nitobond SBR Latex as a priming coat on the concrete walls. Mixing and pouring Conbextra GP2, high strength grout with clean and cool water at ratio of 0.16 on the prepared surface to make the bore packing water tight. The rate shall include necessay materials, tools and application procedure as per manufacturer's specification

Dismantling tiled roofing with battens, boarding etc. complete including stacking of serviceable material and disposal of unserviceable material within 50 metres lead, complete all as specified and directed.

Dismantling roofing including ridges, hips, valleys and gutters etc., and stacking the material within 50 metres lead of, G.S. Sheet, complete all as specified and directed.

Dismantling wooden ballies in posts and struts including stacking within 50metres lead, complete all as specified and directed.

Demolishing stone rubble masonry manually/ by mechanical means in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 metres lead, complete all as specified and directed.

Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead, Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) complete all as specified and directed.

Dismantling wood work in frames, trusses, purlins and rafters up to 10 metres span and 5 metres height including stacking the material within 50 metres lead of sectional area 40 square centimetres and above, complete all as specified and as directed.

Providing corrugated for 0.63 mm thick with zinc coating not less than 275 gm/ m² G.S sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required, complete all as specified and directed.

Providing and fixing precoated galvanised steel sheet roofing accessories of total coated thickness 0.50mm (base metal of minimum 0.45mm thickness with total coating thickness of 0.05mm) with Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws, complete all as specified and directed.

Providing and laying for cement concrete 1:2:4 (1 cement : 2 coarse sand (zone-III) including manufactured sand derived from Recycled Concrete Aggregate (RCA) upto 25% : 4 graded stone aggregate 20 mm nominal size including Recycled Concrete Aggregate (RCA) upto 25%), complete all as specified and directed.

Material and labour Random rubble masonry with hard stone in superstructure above plinth level and upto floor five level, including leveling up with cement concrete (12 graded stone aggregate 20 mm nominal size) at window sills, ceiling level and the like. Cement mortar 1:6 (1 cement : 6 coarse sand), complete all as specified and as directed.

M&L for 2nd class hard wood plain filets rectangular or square in section clean sawn secured with nails exc 06 Sq cm but not exc 13 Sq cm, complete all as specified and directed.

Providing and fixing wood work in frames of Mangalore pattern tile roof below, in position with necessary stainless steel screws etc, as in Sal wood, 2nd class hard wood plain filets rectangular or square in section clean sawn secured with nails, complete all as specified and directed.

Material and labour for Preparing surfaces of wood and wood based materials new or old of any description and girth not otherwise described and treated with creosote oil, complete all as specified and as directed.

Providing & fixing on roof pressed clay tile (Mangalore tile) of 20 mm nominal thickness and of approved size and as per approved pattern on wooden frame work, complete all as specified and directed.

Material and labour for ridge or hip tiles to suit Mangalore pattern roofing tiles bedded and jointed in cement mortar 1:6, complete all as specified and directed.

Taking down Cement plaster / Raking out joints on stone walls, etc. including hacking for key, scrubbing down with water, etc, complete all as specified and directed.

Dismantling of old PVC water tank/ iron loft tank of capacity 500 litrs, complete all as specified and directed.

Supply & Fix rotational moulded polyethylene water storage tanks (cylinderical vertical with closed top) hoisted and fixed in position capacity 1000 ltrs complete all as specified and directed.

Providing and fixing 20mm gun metal gate valve with C.I. wheel of approved quality (screwed end) screwed both ends for iron pipe, complete all as specified and directed.

Providing and fixing 20mm bore ball valve (brass) of approved quality, High or low pressure, with plastic floats, complete all as specified and directed.

Dismantling steel work in built up sections in angles, tees, flats and channels including all gusset plates, bolts, nuts, cutting rivets, welding etc. including dismembering and stacking within 50 metres lead, complete all as specified and as directed.

Dismantling G.I. pipes 15 mm to 40mm, manually / by mechanical means, after taking out the pipes, including stacking of pipes within 50 metres lead, and necessary fittings complete all as specified and directed.

Providing and fixing G.I. Pipes complete with G.I. fittings and clamps, i/c making good the walls etc. concealed pipe, including painting with anti corrosive bitumastic paint, cutting chases and making good the wall, 15 mm dia nominal bore, complete all as specified and as directed.

Providing and fixing G.I. Pipes complete with G.I. fittings and clamps, i/c making good the walls etc. concealed pipe, including painting with anti corrosive bitumastic paint, cutting chases and making good the wall, 20 mm dia nominal bore, complete all as specified and directed.

Cutting chases in brick masonry walls for sand cast iron/ centrifugally cast (spun) iron pipes and making good the same with C.C.(1:3:6), 50 mm dia, complete all as specified and directed.

Dismantling and breakingup drain pipes AC / CI / PVC set in cement mortar 100mm/75mm bore, complete all as specified and directed.

Supply & Fix PVC (SWR) pipes single socketed in any length with rubberring joints fixed to walls or floor 75mm bore, complete all as specified and directed.

Supply & Fix 75mm PVC(SWR) bends any radius with access door, complete all as specified and directed.

Supply & Fix 75mm PVC(SWR) branch piece single(single) equal or unequal with access door, complete all as specified and directed.

Supply & Fix 110mm bore single socket PVC (SWR) pipe, in any length with rubber ring joints fixed to walls, complete all as specified and directed..

Supply & Fix PVC (SWR) bends any radius of 110mm bore, complete all as specified and directed.

Supply & Fix PVC(SWR) branch piece, single Y equal or unequal of 110mm bore, complete all as specified and directed.

Providing and fixing PVC (SWR) multi floor trap with grating including jointing with solvent cement, complete all as specified and directed.

Salt glazed stone ware gully trap 150mm square type 'P' includng MS gratings suitable to 150 x 150 mm gully trap and including PCC chamber 10 cm thick and RCC cover set in CM 1:6, complete all as specified and directed.

Supply & Fix in repair stainless steel plate rack of size 600mm x 900mm made out of 1mm thick stainless steel sheet of grade 304, complete all as specified and directed. Make: Nirali, Prayag

Supply & Fix in repairs Vitreous China wash basin, white, flat back, size White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar taps including brackets, including cutting for and pinning in ends of brackets or erecting stand and including 32mm bore waste coupling of PTMT (half or full threaded) Minimum weight 32mm-45gms/40mm-60 gms), complete all as specified and directed.

Providing and fixing in repairs C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms, 15 mm nominal bore, complete all as specified and directed.

Providing and fixing in repairs 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers, complete all as specified and directed.

Supply & Fix in repair PVC bathroom cabinet mirror 450mm x 600mm with all necessary fitting make : Prayag Cat No 551 or equivalent, complete all as specified and directed.

Providing and fixing in repairs PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106 gms, complete all as specified and directed.

Providing and fixing in repairs PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour, 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms, complete all as specified and directed.

Supply & Fix in repairs 2 in 1 wall mixture of brass chromium plated, 15mm bore, screwed down, screwed for iron pipe or for brass ferule and fixed, complete all as specified and directed.

Providing and fixing in repairs 600x120x5 mm glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc, complete all as specified and directed.

Providing and fixing in repairs 150mm dia C.P. brass shower rose with 15 or 20 mm inlet including fixing to steel pipe or union, complete all as specified and directed.

Providing and fixing in repairs C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931, 15 mm nominal bore, complete all as specified and directed.

Providing and fixing in repairs white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required, W.C. pan with ISI marked white solid plastic seat and lid, complete all as specified and directed.

Providing & fixing in repairs White vitreous china water closet squatting pan (Indian type) Orissa pattern W.C Pan of size 580x440 mm, along with "S" or "P" trap including dismantling of old WC seat and "S" or "P" trap at site complete with all operations including all necessary materials, labour and disposal of dismantled material, complete all as specified and directed.

Providing and fixing in repairs P.V.C. low level flushing cistern, 10 litre capacity - White with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures, complete all as specified and directed.

Providing and fixing in repairs toilet paper holder, C.P. brass,. complete all as specified and directed.

Supply & Fix in repairs two way bib cock of brass chromium plated, 15mm bore, screwed down, screwed for iron pipe or for brass ferule and fixed, complete all as specified and directed.

Providing and fixing in repairs 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make, complete all as specified and directed.

Providing and fixing in repairs Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required overall size 510x1040 mm bowl depth 250 mm, complete all as specified and directed.

Providing and fixing uplasticised PVC connection pipe with brass unions, 15mm dia and 450mm long, complete all as specified and directed.

Supply and Fix in repairs 40 mm bore Low density polyethylene pipes (LDPE) of pressure rating 6 kgf/cm ² fixed complete to walls, ceilings or in floors etc, including all pipe fittings, complete all as specified and directed.

Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead, complete all as specified and directed.

Material and labour 18 mm cement plaster in two coats under layer 12 mm thick cement plaster 1:5 (1 cement : 5 coarse sand) and a top layer 6 mm thick cement plaster 1:3 (1 cement : 3 coarse sand) finished rough with ponge, complete all as specified and directed. Note: WPC shall be measured and paid separately

Material and labour for 18 mm cement plaster in two coats under layer 12 mm thick cement plaster 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster 1:6 (1 cement : 6 fine sand), complete all as specified and directed..

Material and Labour for 6 mm cement plaster 1:3 (1 cement : 3 fine sand) finished with a floating coat of neat cement and thick coat of Lime wash on top of walls when dry for bearing of R.C.C. slabs and beams, complete all as specified and directed.

Material and Labour for Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade : New work (two or more coats) over and including water thinnable priming coat with cement primer, complete all as specified and directed.

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade : New work (two or more coats) over and including water thinnable priming coat with cement primer including Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth, complete all as specified and directed.

Material and labour for Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489: 2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives.New work (Two or more coats applied @ 1.43 litre/ 10 sqm. Over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm, complete all as specified and directed.

M&L for preparation of old painted wooden surfaces of any description Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : One or more coats on old work, complete all as specified and directed.

M&L for preparation of old painted steel surfaces of any description, Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade, complete all as specified and directed.

M&L for French spirit polishing : Two or more coats on new works including a coat of wood fille, complete all as specified and directed.

Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. and Material and labour for Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489: 2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives.New work (Two or more coats applied @ 1.43 litre/ 10 sqm. Over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm, complete all as specified and directed.

Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. and Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade : New work (two or more coats) over and including water thinnable priming coat with cement primer including Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth, complete all as specified and directed.

Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. and Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade : old plastered surface as in ceiling (two or more coats) over and including water thinnable priming coat with cement primer, complete all as specified and directed.

Supply and fix Steel work welded in built up sections / framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In stringers, treads, landings etc. of stair cases, including use of chequered plate wherever required, complete all as specified and directed.

S&F modular kitchen size of room 6.00 X 3mtr (approximate) it contails modular accesseries are as under : (Note the shutters shall be of acryalic and all the bins, compartments, railings, handles etc shall be of stainless steel of grade 304) :- (a) Cabinet No 1 size 700X600X800mm. (b) Cabinet No 2 size 900X600X800mm. (c ) Cabinet No 3 size 480X600X800mm. (d) Cabinet No 4 900X600X800. (e) Cabinet No 5 900X600X800. (f) Cabinet No 6 600X600X800mm, and over head cabineet 600X600X300 and chimini faber (Topaz model) 1000m3/hr, complete all as specified and directed.

Material and labour for Keyed pointing in CM (1:3) to random or polygonal rubble, uncoursed or brought upto course, complete all as specified and directed

Material and labour for Brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in Old size bricks in cement mortar 1:6, complete all as specified and directed.

Demolition of reinforced cement concrete of any descreption and in anyposition above or below ground level complete all as specified and directed.

Material and labour for Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level, Thermo-Mechanically Treated bars 10mm and over of grade Fe-500D or more, complete all as specified and directed.

Material and labour for Centering and shuttering including strutting, propping etc. and removal of form for, Suspended floors, roofs, landings, balconies and access platform, for mass concrete, complete all as specified and directed.

Providing and laying Concrete of M25 grade with minimum cement content of 300 kg /cum in position ready mixed or site batched design mix cement concrete for plain cement concrete work, using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana/ Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength, including pumping of concrete to site of laying, curing, carriage for all leads, complete all as specified and directed

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering, all work up to plinth level, a in plinth ptection in 1:3:6 (1 Cement : 3 manufactured sand derived from Recycled Concrete Aggregate (RCA) : 6 graded stone aggregate 20 mm nominal size Recycled Concrete Aggregate (RCA), complete all as specified and directed.

Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre lonq etc. with charcoal/ coke and salt complete all as specified and as directed.

Providing and laying G.I. tape 32 mm X 6 mm from earth electrode directly in ground complete all as specified and as directed.

Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. complete all as specified and as directed.

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 95 sq mm 3½ core complete all as specified and directed.

All as per item No. 129 above but size 16 sq mm 4 core complete all as specified and directed.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc.removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc. complete all as specified and directed.

Taking down old unserviceable Sub main wiring of any size, any type including ERW/PVC conduit/casing caping complete all as specified and directed.

Taking down fan, sealing cable end, dismantling blades and removing fan and blades to store complete all as specified and directed.

Taking down main switches & DBs etc and making good to the disturbed surfaces complete all as specified and directed.

Wiring for light point/ fan point/exhaust fan point/call bell point with 1.5 sq mm FRLS PVC insulated copper conductor single core cable in recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq mm FRLS PVC insulated copper conductor single core cable etc. complete all as specified and directed.

All as per item No 135 above but for One light point controlled by one; one way switch Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, 2 way modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. complete all as specified and directed.

All as per item No 135 above but for One ceiling/Exhaust/ Wall fan point controlled by one; one way switch complete all as specified and directed.

All as per item No 135 above but for One 3 pin 5 Amp socket out let controlled by one switch on indep boardcomplete all as specified and directed.

All as per item No 135 above but one 3 pin socket outlet 5 amps on the same board with other switches, with cables 1.5 sq.mm size complete all as specified and directed.

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit complete all as specified and directed. 2 x 2.5 sqmm + 1 x 2.5 sqmm

All as per item No.140 above but 2 x 4.0 sqmm + 1 x 4.0 sqmm

All as per item No.140 above but 2 x 6.0 sqmm + 1 x 6.0 sqmm

All as per item No.140 above but 4 x 10.0 sqmm + 2 x 6.0 sqmm

Supply and fixing modular 3 Pin 5/6A Socket outlet on the existing modular plate & switch box including connections but excluding modular plate etc. complete all as specified and as directed.

Supplying and fixing call bell/ buzzer suitable for single phase, 230 V, complete all as specified and as directed.

Supplying and fixing 3 module (100 mm x 75 mm) size/modules, GI box alongwith modular base & cover plate for modular switches in recess etc. complete all as specified and as directed.

Supply and fixing modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required for 6 Pin 15/16A Socket outlet complete all as specified and as directed.

Supply and fixing modular switch/socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required for 15/16A Switch complete all as specified and as directed.

Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate complete all as specified and directed.

Supply and fixing ceiling rose 3 terminal 240 volts, 5 Amps on wall/ ceiling/ roof surfaces complete all as specified and directed.

Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc.as required but without MCB/ RCCB/ lsolator 12 way, double door complete all as specified and directed.

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. single pole and neutral complete all as specified and directed.

Supplying and fixing 20 A, 240 V, SPN Industrial type socket outlet, with 2 pole and earth, metal enclosed plug top alongwith 20 A "C" curve, SP, MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc complete all as specified and directed.

Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs but without MCBs and incomer 4 way (4+12) Double door, complete all as specified and directed. Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required.

Supplying and fixing following rating, four pole, 415 V, isolator/ Mcb in the existing MCB DB complete with connections, testing and commissioning etc. 63 Amps complete all as specified and directed.

Supplying and fixing 5 A to 32 A rating, 240/ 415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. Single Pole complete all as specified and directed.

Supply and fixing LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.

Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CM/M/W) minimum 6.00, Air delivery minimum 210 Cum/Min, 350 RPM (tolerance as per IS : 374-2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230, 50 Hz, single phase AC Supply, earthing etc complete all as specified and directed.

Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300m complete all as specified and directed.

Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers complete all as specified and as directed.

Supply and fix electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate,NRV, connection piece etc. complete all as specified and directed.

Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and as directed.

Supply and fixing post top lantern LED type 40 watt 230 watt volts AC outdoor type with decorative post top for 360 degree indirect light IP 65 protection with impact and corrosion resistant complete with driver and lamp complete all as specified and directed.

Supply and fixing round shape 15 watt 220 volts AC recessed/Surface type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

Supply and fixing of Decorative wall mounting, antique brassfinish fixture with opal glass diffuser suitable for 7.5 w A60 led filament lamp E27 base complete all as specified and as directed.

Supply and fixing 8 Watt Bamboo Led bollard new energy saving friendly, long life aesthetically designed aluminium landscape ip 65 luminarie for diffusher lighting with high power LED as light source. complete all as specified and directed.

Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc complete all as specified and as directed.

Providing and laying earth connection from earth electrode with 6 SWG dia G.I. Wire in 15 mm dia G.I. pipe from earth electrode including connection with G.I. thimble excavation and re-filling as complete all as specified and directed.

Mehta Construction Co. (BID ID -3278002)

sanjay m. suryawanshi (BID ID -3274273)

Baljeet Singh Choudhari (BID ID -3277529)

agarwal and company (BID ID -3278016)

MAHESH DADAJI BACHHAV (BID ID -3277343)

ShreHari Civil Enginneering and Contractors (BID ID -3277596)

M/s.BAJRANG CONSTRUCTION (BID ID -3277247)