Loading…
Loading…
Tender Value
₹6.4 L
EMD Value
₹12,829
Closing Date
12 Jun 2026, 5:00 pm7d left
EXECUTIVE ENGINEER,KANGSABATI MECHANICAL DIVISION
Kangsabati Mechanical Division,Khatra,Bankura.
MECHANICAL WORK
2026_IWD_1026304_2
WBIW/EE/KMD/e-NIT-04/2026-27
Open Tender
MECHANICAL
60 days
Susunia
Please refer Tender documents.
7 documents required · 7 mandatory
₹12,829
3 Jun 2026
3 Jun 2026
15 Jun 2026
3 Jun 2026
12 Jun 2026
3 Jun 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount | Item Code |
|---|---|---|---|---|---|---|
| 1 | Dismantling of damaged embeded part like guide channel/bottom seal beam/top runner of gates of distributories/branch canal/minor canal/channel from civil structure as directed by the Engineer-in-charge.The cost of man power employed for dismantling and hire charges of Tools and Plant, scaffolding charges etc. Payment will be made on actual length of Guide Channel replaced. | 45 | RM | 247.99 | ₹11,159.55 | 3 |
| 2 | Taking out old existing unservicable damaged draw/flap gate shutter of distributories/ branch canal/minor canal/channel completely after disengaging from hoisting system completely for installation of new gate shutter. The work includes cutting of gates into suitable pieces by gas cutting, removing the same by mechanical means or suitable crane, stacking all the pieces at the suitable place or departmental godown or as directed by the Engineer in charge. The cost includes cost of man power employed for dismantling and cost of consumables like oxygen, accetylene gas, hire charges of machineries, like chain pulley block, gas set, tools & tackles, scaffolding and safety equipments etc including carriage loading & unloading with all lead & lift. | 326.61 | KG | 6.94 | ₹2,266.67 | 4 |
| 3 | Taking out screw gear rod including its head stock assembly by cutting nuts and bolts from draw shutter of distributories/branch canal/minor canal/channel for replacement/after feeding the canal and handed over to the section office or as directed by the Engineer in charge. The Cost includes cost of Manpower, Cutting, all overheads with all leads and lifts complete. The cost of carraige will be provided extra as per actual basis based on PWD Schedule of Rates. | 12 | EACH | 502.06 | ₹6,024.72 | 5 |
| 4 | Fabrication , supply, erection and commissioning of embeded parts consisting of seal beam, Guide channel with all accessories for vertical gate of distributories/branch canal/minor canal/channel made of MS material consisting of angle, channel, beam, plate, flat, etc. conforming to IS : 2062 -2011/latest revision manufactured as per approved drawing and direction of Engineer in charge. The Cost includes cost of Materials, hire charges of Machinaries , Manpower, Cutting, Aligning, Anchoring, Welding, Finishing, Consumables, Carriage and all overheads with all leads and lifts complete as per specification (without painting). | 228 | KG | 173.84 | ₹39,635.52 | 6 |
| 5 | Fabrication , Supply, erection and commissioning of new Slide type vertical lift regulator service gates of Distributories /BranchCanal /Minor Canal/Channel as per IS: 5620 - 2000/Latest Revision consisting of skin plate, vertical and horizantal grider, stiffener etc. made of MS material consisting of angle , channel, beam, plate, flat, etc. conforming to IS : 2062 -2011/latest revision manufactured as per approved drawing and direction of Engineer in charge. The Cost includes cost of Materials, Machinaries , Manpower, Cutting, Aligning, drilling, Welding, Finishing, Consumables, Carriages and all overheads with all leads and lifts complete as per specification (without painting). | 732.15 | KG | 158.03 | ₹1,15,701.66 | 7 |
| 6 | Supplying, fitting & fixing of screw hoisting arangement made of MS bottom plate, top plate, coller with necessary holes on base plate and top plate to accomodate thrust bearing of suitable size as per approved drawing & design and as per direction of Engineer in charge. The cost includes cost of ms plate as per IS : 2062 ‐2011/ latest revision, man power employed for dismantling and fitting fixing, consumables like cutting tools, bolt & nuts of required size, hire charges of machineries, like lathe/shaping machine, grinding machine, drilling machine, tools & tackles etc including carriage loading & unloading but excluding the cost of lifting Nut/Bush, thrust bearing & wheel supplied seperately. | 189.63 | KG | 206.66 | ₹39,188.94 | 8 |
| 7Supply of bearings. | ||||||
| 7.01 | Bearing no.51111 (SKF)(Thrust bearing) . | 9 | EACH | 2,496.92 | ₹22,472.28 | 10 |
| 8Supplying, fitting & fixing M.S fabricated wheel in the screw hoisting system for lifting or lowering the draw shutter.The wheel consisting of suitable size ms hub to accomodate any size of G.M/C.I nut. The rim and four nos arm of wheel are made of 25mm. to 36mm. dia m.s rod complete as per direction of the Engineer‐in‐charge. The cost includes cost of materials, man power employed for dismantling and fitting fixing, consumables like cutting tools, welding rod, hire charges of machineries, like bending machine, lathe machine, grinding machine welding set, tools & tackles etc including carriage loading & unloading. | ||||||
| 8.01 | upto 60 cm dia. MS wheel | 118.4 | KG | 165.33 | ₹19,575.07 | 12 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.41 MB
2911.pdf
Tender Documents • 0.50 MB
NIT04.pdf
Tender Documents • 1.39 MB
FORMS.pdf
Tender Documents • 1.39 MB
BOQ_2521496.xls
BOQ • 0.31 MB
Download all tender documents and submit your bid