Construction of Commercial complex at NAC office premises at ward no 05

Earth Work in all kinds of soil within initial lead of 50.00m and 1.5m initial lift including rough dressing and levelling the bed with all labour T&P etc. complete as directed by the Engineer - in Charge.

Filling in foundatin and plinth with sand watered and rammed etc including all cost conveyance roalty ,labour and T&P etc. complete as directed by the Engineer - in Charge

Cement concrete (1:4:8)with 4cm size hard granite metal per 1cum

Brick work with Fly ash bricks of 23 Cm. x 11 Cm. x 8 Cm size having crushing strength not less than 75Kg/cm2 with dimensional tolerance ±2 percent in cement mortar (1:6) in foundation and plinth per cum.

b) in superstructure-

R.C.C. work of M-25 grade with 20mm and down grade black hard granite (crusherbroken) stone chips including hoisting and laying

Supplying ,fitting and placing uncoated HYSD bar reinforcement complete as per drawing and technical specification.

2.5 cm. Damp proof course with C.C. (1:2:4) using 12mm. Size hard broken granite Chips

Supplying, fitting and fixing vetrifed tile in floors of size 600mm x 600mm of approved make conforming to IS: 13755 laid on 20 mm thick cement mortar (1:4) (1 cement :4 course sand ) and filling joints with white cement of approved quality including cost

16 mm. thick cement plaster (1 :6) over brick masonry…etc/Compl.

12 mm. thick cement plaster (1 :6) over brick masonry…etc/Compl.

Supplying fitting & Fixing of MS Grills- Placing in position etc all complete.

Finishing surface of walls with Cement based wall putty (Water based ) of approved make and finished smooth and even surface to receive painting including cost of scaffolding staging charges with cost of all materials taxes, labour T&P etc

Wall painting 2 coat with plastic emulsion paint of approved shade on old work to give an even shade Inculding cost of paint. T&P etc complete.

Wall painting 2 coats with Weather Coat paint of approved shade on new work to give an even shade Inculding cost of paint…etc/Compl.

Priming 1 coat with any appproved Primer including all cost etc complete.

Painting 2 coat with any appproved paint on new wood work and Steel work including all cost etc complete.

Providing fitting, fixing of Al. door with anodized Al. door section of 9202 as vertical member, 9201 as top member and 9200 as bottom and middle member with frame section as 9221 with tapered clip No.4660 and the frame to be completed by means of jointi

Supplying, fitting, fixing up window (sliding type) made up aluminum Section 9778, as windows frame section No. 4095,4096 and 9777,3994 as shutter frame with 5mm thick black glass as panel fitted arrangement including all fitting includin

Please Enable Macros to View BoQ information