SPECIAL REPAIR OF BLDG NO T-93 (OFFICE AND STORES OF B COY ) OF 5001 ASC BN (MT) UNDER GE(E) MATHURA

Amount

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L for coloured joint free Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in cement mortar 1:4 complete all as specified and directed.

M&L for joint free light shade coloured double charged Vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles over and including 15 mm thick screed bed in cement mortar 1:4 complete all as specified and directed.

M&L for joint free light shade coloured double charged Vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in skirting/dado etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles over and including 10 mm thick rendering in cement mortar 1:4 complete all as specified and directed.

M&L for coloured Glazed ceramic tiles as in vertical surface 450X300X 7mm thick set and jointed in skirting over 10mm thick rendering in CM 1:4 using neat cement slurry and pointed in white or colour cement to match complete all as specified and directed.

M&Lfor Non skid Ceramic coloured tiles 7-8 mm thick (square/ rectangular) area of each tiles exc 0.18 sqm but not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:4 complete all as specified and directed.

M&L Non - skid coloured Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm as in vertical surface like dado or skirting over & including10mm thick in CM 1:4 set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc.laid bedded and pointed in any mortar complete all as specified and directed.

M&L for 20 mm thick Granite black work (in one single piece table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over and including 15mm thick screed bed in cement mortar 1:6 complete all as specified and directed.

Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and directed.

Demolition of brick work or stone boulder masonary built in cement mortar including all quoins arches pillars etc. but excluding ashlar facing dressed stone work and precast concrete articles complete all as specified and directed.

M&L for Brickwork with fly ash bricks straight or curved on plan exc 6 m mean radius built in cement mortar 1:6 complete all as specified and directed.

M&L for Brickwork with flyash bricks, straight or curved on plan to any radius in half brick thick walls,built in cement mortar 1:4 complete all as specified and directed.

Taking down cement or cement lime plaster on brick or stone walls, etc. including raking out joints,hacking for key,scrubbing down with water, etc complete all as specified and directed.

M&L for 15mm thick rendering in two layer on stone masonry surfaces or surfaces other than fair face of brick work of walls consisting of 1st layer of 10mm thick plaster in CM 1:4 and 2nd layer (setting coat or top layer) of 5 mm thick plaster in CM 1:4 mixed with water proofing compound (ISI marked) @ 200 ml per bag of cement or as per manufacturer’s instructions, finished fair & even, complete all as specified and directed. Note : - Supply only water proofing compound shall be measured and paid for separately.

M&L rendering 10 mm thick on fair faces of brick surfaces or concrete surfaces and finished surfaces even & fair in CM 1:6 complete all as specified and directed.

M&L for preparation of new surfaces of wall and applying two coats of oil bound distemper over a coat of primer over and including a coat of 1 mm wall care putty includingn using rollers to achieve excellent application using limited manpower including scaffolding, trestles, ladders, cradles and necessary safety measurescomplete all as specified and directed.

Material & Labour for applying Two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal esistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces incl preparation of newly plastered surface using spray machine, spray hard to receive area to achieve excellent application using limited manpower including scaffolding, trestles, ladders, cradles and necessary safety measures complete all as specified and directed.

M&L for preparation of new steel surfaces and applying two coats of synthetic enamel paint over a coat of zinc chromate primer complete all as specified and directed.

M&L for preparation of old painted steel surface of any description over 10 cm in width or girth and applying one coat of synthetic enamel paint complete all as specified and directed..

M&L for preparation of new wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

Supply only liquid water proofing compound complete all as specified and directed.

Taking down Chowkhats or frames with shutter without taking off shutters from the frames not exc. 1.5 sq. m each complete all as specified and directed.

Taking down Chowkhats or frames with shutter without taking off shutters from the frames exc 1.5 sq. m but n exc 4 sq. m each complete all as specified and directed.

S&F in repair curtain rod stainless steel chromium plated 20mm dia with bracket knobs including end cap complete all as specified and directed.

S&F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.4 mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed.

S&F Anodised aluminium power coating frame for sliding doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.

M&L Powder coated (minimum thickness of power coating 50 micron) aluminium window and ventilator, door shutters, side hung type/sliding type without sash bars, aluminium sections including necessary joining cleats, glazing clips, rubber packing, powder coated aluminium snap beading, screws, powder coated aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and directed.

M&L figured glass 5mm thick seleted quality fixed to aluminium frames and necessary rubber bedding required complete all as specified and directed.

S&F 4 mm thick Sheet glass, ordinary quality and glazing fixed to aluminium/ Steel/ wooden frame with rubber beading/ putty/ wooden beading as required area n exc 0.5 sq. m in each pane complete all as specified and directed.

S&F aluminium deco 06 mm thick grill mesh made out mesh size not exc 50mmx50mm fixed with f channel/u channel complete all as specified and directed.

S&F factory made single extruded WPC (Wood polymer Composite) solid door/window chowkhats of size 65mmx125 mm Double rebated comprising of virgin PVC polymer of K value 58-60 calcium carbonate and natural fibers (wood powder /rice husk) and non toxic additives fabricated with miter joints after applying PVC solvent cement and screw with full body threaded star headed SS screws with full body threaded star headed SS screws having minimum frame densityn of 750 kg/cum screw withdrawal stength of 2200 face &1100 N edges minimum compressive strength of 58 N/mm2 modules of elasticity 900n/mm2 and resistance to spread of flame of class A category with property of being termite /borer pfoof water /moisture proof and fire retardant and fixed in position with MS hold fast /lugs /SS dash fasteners of required and length complete all as specified and directed.

S&F Factory made solid panel PVC molded door shutter 28-30 mm thick (style)with 2 or 6 raised panneled desighned with 2mm thick moulded prelam pvc sheet on both face with partical board core as per specification & drawings complete all as specified and directed.

S&F factory made Solid panel PVC door shutter 30mm thick (stiles) consisting of frame made out of M S tubes for top & bottom rails M.S frame shall be covered with heat mouldeded both side prelam PVC sheet , wire gauzed i.e panel will be of wire gauze in lieu of both side prelam PVC sheet the wire gauze shall be wrapped on an additional square 8mm M.S Solid tube and this tube shall be stretched to tighten firmly stile and rails feathered at edges .supplying & fixing in frame at site complete all as specified and directed.

S&F 200 mm size aluminium anodized barrel tower bolts of extruded section and fixed complete all as specified and directed.

S&F 250 mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and directed.

S&F 200 mm long aluminium anodised handles, cast type complete all as specified and directed.

S&F floor door stopper of aluminium alloy body anodised overall length of cover plate 150mm with hard drawn steel spring, fixed in floor complete all as specfied and as directed.

S&F Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty complete all as specified and directed.

Taking up or down 15 mm bore of dia steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed.

Taking up or down 20 mm bore of dia steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed.

Supplying & Fixing CPVC pipes SDR 11 & Plain CPVC SDR 11 20 mm bore with all fittings and fixed complete to walls and ceiling or laid under floor complete all as specified and directed.

Supplying & Fixing CPVC pipes SDR 11 & Plain CPVC SDR 11 25 mm bore with all fittings and fixed complete to walls and ceiling or laid under floor complete all as specified and directed.

Taking down PVC SWR pipe (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and directed.

S&F 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

S&F 75 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

S&F 110mm bore PVC (SWR) bends any radius complete all as specified and directed.

S&F 75mm bore PVC (SWR) bends any radius complete all as specified and directed.

S&F 75mm outlet dia bore PVC (SWR) floor trap plain with grating including jointing with solvent cement complete all as specified and directed.

M&L for Cutting chases, pinning in, making good to facing where required & pointing in CM 1:3 to ends or edges of landings ,steps cill sunshade ,shelves ,lintel , concealed water tubing and like not exc 10CM girth in brick wall complete all as specified and directed.

S&F in repair cast copper alloy chromium plated 15 mm Bib cock with wall flange, cast copper alloy with crutch, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed. NOTE:- The minimum weight of item should be 400gm each

S&F in repair Angular Stop valve/angular cock 15mm bore cast copper alloy chromium plated with wall flange,chromium plated screwed down, high pressure fancy type screwed both end for iron pipe or for unions and fixed complete all as specified and directed. NOTE:- The minimum weight of item should be 400gm each

S&F in repair PVC connections 15mm size with PTMT nuts of length 450 mm including fixing complete all as specified and directed.

S&F in repair colour european type combination pattern EWC one piece casket type with mounted flushing cistern , PVC connection,seat cover and jointed to sewage pipe complete all as specified and directed.

S&f in repair Health faucet (ABS body) chromium plated including SS flexible tube 15 mm dia 1.5 mtr and wall hook including making connection and fixed in position complete all as specified and directed.

S&F in repair for Chromium plated toilet paper holder including fixing to wall complete all as specified and directed.

S&F in repair counter Vitreous Chinarware wash hand basin,counter top of size 550x400 mm including brackets,brass waste coupling complete all as specified and directed.

S&F in repair chromium plated Soap dish holder complete all as specified and directed.

S&F in repair chromium plated towel ring complete all as specified and directed.

S&F vitreous china urinal,half stall type ,size (375x390x590) white (excluding flushing cistern, flush pipe and waste pipe) complete all as specified and directed.

S&F in repair Gun matel, globe or gate valves 20 mm bore dia, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

Demolition of Concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness below or above ground level unreinforced complete all as specified and directed.

M&L for 50mm thick Cement concrete 1:3:6 type C-1 using 20mm graded stone aggregate finished cement concrete surface even and fair without using extra cement as in plinth protection laid in panels complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

S&F roof trusses (framed), trussed, purlines, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections, ) including distance places, cleats etc grade Fe-401-W (Gde-E-250) quality 'A' complete all as specified and directed.

Cutting holes in brick walls in mud mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required not exc half bricks complete all as specified and directed.

M&L for providing damp proof layer in two coats of acrylic polymer coating consisting of 1 part of acrylic polymer liquid mixed with 2 parts of cementious powder applying at the rate of 1.40 Sqm/ Kg of mix per coat. Second coat should be applied after 4-6 hrs of first coat, 5 days curing is to be carried out to the surface before providing plastering complete all as specified and directed. Note : Make of the material 'Smart Care damp block 2K' as approved.

S&F in repair rotational moulded, polythene PVC water storage tank (Cylindrical vertical with closed top) tripple layer white in colour 1000 Ltr capacity hoisted and fixed in position including 20mm brass ball valve and tak nipple complete all as specified and directed.

Dismantling Asbestos cement (corrugated,semicorrugated ,etc ) in roof covering complete all as specified and directed.

M&L for Pre- painted galvalume aluminum zinc coating GI based semi corrugated /manglore pattern steel sheet 0.50mm thick of red colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F pre painted Plain galvanised, mild steel sheet .50 mm thick , in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 150 complete all as specified and directed.

Dismantling wall and ceiling boards (fiber, pulp, insulation, etc) or insulation board/slabs/blankets, any thickness, including cover fillets complete all as specified and directed.

S&F anodised grid (of size 605 mm x 605 mm) frame make for false ceiling including providing hangers of 6mm GI (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40x30mm size 60mm long and expansion hold fasteners 12.5mm dia 40mm long complete all as specified and directed.

M&L for 4mm thick Non asbestos fibre cement designer building/ceiling boards size (600mmx600mm) fixed with screws to snap grid works in ceiling complete all as specified and directed.

M&L for 75mm thick Cement concrete 1:4:8 type D2 using 40mm graded stone aggregate as in sub base complete all as specified and directed.

M&L non skid coloured cermic ENDURA tiles exc. 0.11 and n exc .0.18 Sqm 10mm thick set and jointed in neat cement slurry & pointed with coloured cement to match in floor over 15mm thick screed bed in CM 1:4 complete all as specified and directed.

M&L for 80 mm factory made chamfered edge precast concrete interlocking paver blocks any shape and size locally available of best quality and confirming to IS 15658-2006 , M-30 Grade with grey cement and pigments with appproved colour design &pattern as in footpath, parks, lawan,or light traffic ways of required strength made by table vibratory method using PU mould laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, compacted and proper embedding /laying of inter locking paver block into the sand bedding layer through vibratory compaction by using plate vibrator filling the joints with fine sand and cutting of paver block as per required size and pattern finishing and sweeping extra sand complte grey cement and pigments complete all as specified and directed.

M&L for P.C.C 1:2:4 type B-1 (using 20 mm graded stone aggregate) as in coping or roof kerbs on roof chamfered on edge including troating slightly complete all as specified and directed.

Taking down old unserviceable cooler stand/ladders/frame of any size & any type fixed on external face of walls at cill level of windows at ground floor and first floor of building including cutting holes and making good the disturbed portion with cement mortar or PCC after refixing new cooler stand complete all as specified and directed.

S&F mild steel framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders, cooler stand ; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete all as specified and directed.

S&F hollow PVC Wall lining consisting of 5 mm thick plain colour PVC sheet inclusive of solvent cement and fixed with PVC plug and screw and inserted to next panel groove edge and corners of all door window opening etc to be covered with pvc angle fixed at site as per manufacture instruction complete all as specified and directed.

M&L for precast cement concrete (1:2:4) type B-0 using 12.5mm graded stone aggregate set in CM (1:4) as in louvres and jallies,35 mm thick (measured solid),including post, all mouldings ,complete all as specified and directed.

S&F in repair pillar tap 15mm bore cast copper alloy with fancy type , chromium plated screwed down high pressure long screwed shank and fly nuts for iron pipe complete all as specified and directed.

Taking down carefully aluminum/copper point wiring (light ,fan, socket any type, power, bell etc. ) complete including fixtures & fittings (such as ceiling rose, socket, Pendent, regulator, light fitting etc) and removing the material from site and making good the disturbed surfaces of walls ceiling etc complete all as specified and directed. (Note: Credit for above items should be made as per credit Schedule separately)

M & L for Point wiring with 1.5 Sqmm (nominal area) single core PVC insulated unsheathed (FRLS) cable, multi-stranded, copper conductor, in universal colour code with & including suitable size of rigid non-metallic PVC conduit (not less then 20mm dia med gd) and its all accessories complete concealed in wall incl cutting & chases( making good all to the disturbed surfaces as per existing) including earth wire of PVC insulated (FRLS) copper conductor multistranded of 1.5 Sqmm size in green colour complete all as specified in current SSR Part-I & II & complete all as specified and directed, as described below:-

One light point/Fan point controlled by one switch 5 amp.

One 3 pin socket outlet 5 amps point controlled by one switch on same board.

One 3 pin socket outlet 5 amps point controlled by one switch, Independent board.

All as per item No.86 here-in-above but for 3 pin/ 5 pin, sockets outlet,15 amps with 4.0 sqmm PVC insulated & unsheathed (FRLS) cable, independent, Point wiring

M&L ceiling rose, PVC / polycarbonate, isolated body 65mm x 50mm three terminals complete all as specified and directed.

S&F switch piano, flush type single pole, one way 5 amps complete all as specified and directed.

S&F switch piano, flush type single pole, one way 15 amps complete all as specified and directed.

S&F socket outlet 2-in-1, 3 pin, 5 amps, 2 module complete all as specified and directed.

S&F socket outlet 2-in-1, 3 pin, 5/15 amps, 2 module complete all as specified and directed.

S&F Fan Regulator, step type, 100watt, 2 module complete all as specified and directed.

Supply & fixing in repair indoor decorative ultra slim surface / wall mounted LED batten tube light complete fitting 1x 20 watt LED Tube fitting with polycarbonate channel housing & integrated electronic driver,energy efficient, 140V-270 volts,co- related colour temperature (CCT) of 6500K, >100 Lm/Watt complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable of suitable size complete all as specified and directed.

Supply & fixing in repair indoor decorative ultra slim surface /Wall mounted T5 LED batten tube light complete fitting 1x10 watt LED Tube fitting (size within 600x25x40 mm) suitable for mirror light with polycarbonate channel housing & integrated electronic driver,energy efficient, 140V-270 volts,co- related colour temperature (CCT) of 6500K,>100Lm/Watt,warm white/ cool white/natural white complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable of suitable size complete all as specified and directed.

Supply and fixing LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed.

Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed.

M&L for building security light bracket made out of 40mm dia light grade GI pipe of 1.2 m length bent to required shape suitable for fixing street light fitting on Steel tubular pole including two Nos clamps made out 40mm X 6mm flat with suitable nuts and bolts including two coats of aluminium paint over a coating of red oxide primer including taking down old unserviceable bracket as scrap any size/description complete all as specified and directed.

Taking down of MCB DBs/ sheet metal enclosure with MCB's/MCCB's complete all as specified and directed.

S&F MCB distribution board, SPN 12 Way, Double door, sheet steel, phosphatised, powder painted with bus-bar 200Amp, neutral link, earth bar and din rail , cable ties for cable management, 240 V, complete all as specified and directed.

S&F TP&N Vertical Loadline distribution board, 4 Way, Double door, sheet steel, phosphatised, powder painted with bus-bar 200Amp, neutral link, earth bar and din rail ,blanking Plates, cable ties for cable management, 440 V, 4 way complete all as specified including fitting suitable for MCBs and MCCBs with connections complete all as specified and directed. Note:- DB shall be fixed in flush pattern by cutting the wall and making good disturbed surface as pe directed & rate shall be included in the items.

S&F MCCB 3P, 125 Amps, 16kA with spread terminals and all electrical connection complete all as specified and directed.

S&F MCB SPN, 63 Amps, 'C' series, breaking cap 10 kA, 240V in MCB DB complete all as specified and directed.

S&F MCB SP, 5-32 Amps, 'C' series, breaking cap 10 kA, 240V in MCB DB complete all as specified and directed.

S&F MCB SP, 40-63 Amps, 'C' series, breaking cap 10 kA, 240V in MCB DB complete all as specified and directed.

Taking down fan, sealing cable end, dismantling blades and removing fan complete all as specified and directed.

Hanging only ceiling fan and replacement of suitable length down rod with hook and rubber seat complete with electrical connection with 1.5 sqmm pvc insulated and pvc sheathed wire complete all as specified and directed.

Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250mm complete all as specified and directed.

Cutting holes for air ducting of exhaust fan in Circle / square shape or as per site and making good to the disturbed surfaces complete all as specified and directed.

Taking down carefully by Submain wiring/ service connection of any type complete all as specified and directed.

M & L for Sub Main Wiring with two runs single core 10 Sqmm PVC insulated unsheathed (FRLS) cable with multistranded, 1100 volts grade copper conductor drawn in suitable size of rigid non-metallic PVC conduit (not less then 25mm dia med gd) and its all accessories complete concealed in wall/roof incl cutting & chases( making good all to the disturbed surfaces as per existing) with and including 10 Sqmm copper green colour earth wirecomplete all as specified and directed. Note: Two runs 10 Sq mm (P&N), one run of 10 Sq mm earth wire & One run of PVC conduit will measured as one RM.

Supply and fix Single pole and neutral sheet metal enclosure with a two pin and earth plug and socket complete with one single pole MCB of rating 20 Amps, 'C' series. 240 Volts with all connection complete all as specified and directed.

Earthing complete all shown as electrical plate No -03 of MES Sch part-I complete all as specified and directed including the following:- (i) GI earth plate of size 60x 60cm x6.0mm thick burried directly in ground vertically to a depth not laess than 2.25 mtr below ground level with top edge of earth plate at a depth not less than 1.50 metres below ground level. (ii) Earth plate surrounded by and packed with charcoal and common salt in alternative layers. ( n.exc 15 cms each layer) (iii) 4 mm GI wire from earth plate to MCB DB/machinery including necessary GI bolts, nuts check , washers, thimbles etc. (iv) 20 mm bore, light grade, Gi pipe for watering including GI funnel and wire mesh. Pipe shall be provided vertically upto top level of earth pit and then taken horizontaly to the earth pit.

M/S ANIL KUMAR (BID ID -3232018)

JWALA ELECTRIC CONTRACTORS (BID ID -3232057)

KASHI NATH BANWARI LAL (BID ID -3231892)

BHARDWAJ CONSTRUCTIONS (BID ID -3232225)