CERTAIN REPAIR REPLACEMENT OF INTERNAL WIRING AT KHUNDRU UNDER GE 861 EWS

Amount

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including unscrewing from board fitting and fixture such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody for reuse if serviceable or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc complete all as specified and directed.

M&L Point wiring for one light point/fan point controlled by one switch with 1.5 sqmm PVC FRLS insulated unsheathed copper conductor single core multi strand flexible cable and 1.5 sqmm PVC insulated unsheathed copper conductor single core cable (green color) as earth lead in and including PVC casing and capping/Conduit medium grade of suitable size run on wall/surface with all fittings (ISI Marked) controlled by one switch including CI/MS sunk box of required size or PVC Gang Box with 3 mm thick plastic laminated sheet cover of adequate size for one light point/fan point controlled by one switch and making good disturbed surfaces with CM (1:3) to match with the existing surface, complete all as specified and directed.

All as per srl item No-2 here in above but for one 3 pin 5A socket outlet independent controlled by one switch, complete all as specified and directed.

All as per srl item No-2 here in above but for one 5A socket outlet on the same board controlled by one switch, complete all as specified and directed.

All as per serial item No 2 here-in-before but for 3 pin 15 Amps socket outlet independent board with 2.5 sqmm PVC FRLS insulated unsheathed copper conductor single core multi strand flexible cable and 2.5 Sqmm PVC FRLS insulated unsheathed copper conductor single core cable (green color) as earth lead, complete all as specified and directed.

M&L concealed Point wiring complete with 1.5 sqmm 1100 graded PVC FRLS (Multistrand) insulated unsheathed copper conductor, PVC conduit not less than 20mm dia concealed, including cutting chases, finishing of slote by means of cement mortar making good to existing surface of the wall and touching with three coats of existing colour of wall and making good disturbed surface complete sunk in pressed steel terminal boxes of required size not less than 1.6mm thick factory made and factory painted with top cover 3mm thick plastic laminated sheet fixed with brass screw and washers with all accessories including single core multistranded copper conductor 1.5Sqmm size cable as earth continuity wire connected to common earth dolly to modular concealed box and white cover plate of required nos and required size for housing switches, sockets etc for one light / fan/ bell point controlled by one switch one way and making good disturbed surfaces with CM (1:3) to match with the existing surface, complete all as specified and directed.

All as per srl item No-6 here in above but for one 3 pin 5A socket outlet independent controlled by one switch, complete all as specified and directed.

All as per srl item No-6 here in above but for one 5A socket outlet on the same board controlled by one switch, complete all as specified and directed.

All as per srl item No-6 here in above but for one 3 pin 15 Amps socket outlet independent with 2.5 sqmm PVC insulated unsheathed copper conductor single core multi strand flexible cable and 2.5 Sqmm PVC FRLS insulated unsheathed copper conductor single core cable (green color) as earth lead, complete all as specified and directed.

M&L for sub main wiring with two single core PVC insulated flexible copper conductor cable of size 4 sqmm and one single core PVC insulated flexible copper conductor cable green colour of size 4 Sqmm as earth lead in & including PVC casing capping medium grade 2mm thickness ISI marked incl taking down old unsv complete all as required at site or directed.

M&L for sub main wiring with two single core PVC insulated flexible copper conductor cable of size 6 sqmm and one single core PVC insulated flexible copper conductor cable green colour of size 6 Sqmm as earth lead in & including PVC casing capping medium grade 2mm thickness ISI marked incl taking down old unsv complete all as required at site or directed.

M&L for sub main wiring with two single core PVC insulated flexible copper conductor cable of size 10 sqmm and one single core PVC insulated flexible copper conductor cable green colour of size 10 Sqmm as earth lead in & including PVC casing capping medium grade 2mm thickness ISI marked incl taking down old unsv complete all as required at site or directed.

M&L for sub main wiring with two single core PVC insulated flexible copper conductor cable of size 4 sqmm and one single core PVC insulated flexible copper conductor cable green colour of size 4 Sqmm as earth lead in & including PVC conduit medium grade ISI marked incl taking down old unsv complete all as required at site or directed.

M&L for Switch piano flush button single pole one way 5 amps 240 volts, complete all as specified and directed.

M&L for Switch Socket combination, 6 pin 5 and 15 amps multi purpose 2 in 01 flush type, 230 volts, complete all as specified and directed.

M&L for Switch Socket combination 2 in 1, 5 Amps flush type, 230 volts, complete all as specified and directed.

M&L for Socket outlet 2 in 1, 3 pin, 6 Amps flush type 50 Hz all as specified and directed.

Ceiling rose 3 terminal bakelite 65mm x50mm surface type, PVC/Polycarbonate, isolated body, complete all as specified and directed.

Supply and fixing in replacement fan regulator electronic, step type hum free suitable to control speed of fan from 0 to 100% and connecting electrically all as required at site or directed.

S & F in repair lamp holder, PVC/ Polycarbonate type with back plate, straight/ angular, suitable for batten fittings, complete all as specified and directed.

Supply & fixing bell push, flush type, 5 Amp, complete all as specified and directed.

Supply & fixing in repair call bell , ding dong AC single phase, 230 volts 50 Hz including wooden/PVC board of suitable size, connecting and testing, complete all as specified and directed.

Supply and fixing in repair Plug top 3 pin 15/16 amps 230 volts, complete all as specified and directed.

Supply and fixing in repair, Plug top 3 pin 5/6 amps 230 volts, complete all as specified and directed.

Supply & fixing in repair PVC Gang box surface type suitable for fixing of 5 pin 15 Amp multipurpose switch socket on wall complete all as specified and directed.

Supply & fixing in repair PVC Gang box surface type suitable for fixing of 5 pin 5 Amp multipurpose switch socket on wall complete all as specified and directed.

Supply and fixing in repair LED 7 watt pin type bulb complete all as specified and directed.

S&F in repair decorative ultra slim linear LED in replacement of 20 Watt , 4 ' long lighting fixture with extruded Al heat sink , environment friendly , energy efficient ready to use pack incl LED tube complete with inbuilt electronic driver , PCB , connector block etc including connecting up with three core twisted flexible copper conductor cable with suitable size LED tube all as specified and directed by EIC. Make : Havells Cat Part No LHDD02102674 or Equivalnet/C&S/Bajaj.

Supply and fixing in replacement MCB Distribution board , 240 volts single pole and neutral , double door, sheet steel, enclosure powder coated with 200 Amps rated copper busbar with neutral link, 4 ways, IP-43 protection,fixed on wall duly grouted in solid block wall or on wooden board with electrical connection and making good disturbed surfaces of walls etc, including two coats of white/colour washing/distempering etc to match the existing surface, complete all as specified and directed.

Supply & fixing in replacement MCB Distribution board , 240 volts single pole and neutral , double door, sheet steel, enclosure powder coated with 200 Amps rated copper busbar with neutral link, 8 ways, IP-43 protection, fixed on wall duly grouted in solid block wall or on wooden board with electrical connection and making good disturbed surfaces of walls etc, including two coats of white/colour washing/distempering etc to match the existing surface, complete all as specified and directed.

Supply & fixing in replacement of for MCB single pole 240 volts 6 to 32 amps as per site requirement , with rupturing capacity 10 KA as per IS-8828-1996 (IEC-60898), biconnect upper and lower terminals , integrated label holder to ensure circuit identification, complete all as specified and directed.

Supply & fixing in replacement of Isolator single pole neutral (SPN) 32 Amps to 40 Amps 240 Volts with rupturing capacity 10 KA, complete as specified and directed.

Supply & fixing in replacement of MCCB distribution board TPN, 12 way vertical double door sheet steel enclosure powder coated with and including 100 Amp rated Bus bar,100Amp 25kA 415 Volt MCCB,DP and SP MCBs 6-32 Amp prewired wired, complete all as specified and directed.

Supply & fixing in replacement of for MCB single pole and neutral 240 volts 32 to 40 amps as per site requirement , with rupturing capacity 10 KA as per IS-8828-1996 (IEC-60898), biconnect upper and lower terminals , integrated label holder to ensure circuit identification, complete all as specified and directed.

Supply & fixing in replacement of MCB TPN 415 volts, 40-63 amps 'C' Curve 10 kA capacity, complete all as specified and directed.

Taking down old and unsv ceiling fan, exhaust fan , wall mounted fan from the site cleaning entire fan free from dust oily and greasy surface and oiling and greasing of the and fixing it own location with and including of the minor spares such as piece of wire nuts bolts and washer etc. all as specified and directed.

M&L for strip opening of unsv ceiling fan1200 mm sweep rewinding with super enameled copper winding wire of existing gauge and existing nos of turn with and including insulation material complete all as specified and directed.

M&L for strip opening of unsv ceiling fan1400 mm sweep rewinding with super enameled copper winding wire of existing gauge and existing nos of turn with and including insulation material complete all as specified and directed.

M&L for strip opening of unsv Exhaust fan 230 mm sweep rewinding with super enameled copper winding wire of existing gauge and existing nos of turn with and including insulation material complete all as specified and directed.

M&L for strip opening of unsv Exhaust fan 300 mm sweep rewinding with super enameled copper winding wire of existing gauge and existing nos of turn with and including insulation material complete all as specified and directed.

M&L for strip opening of unsv Exhaust fan 450 mm sweep rewinding with super enameled copper winding wire of existing gauge and existing nos of turn with and including insulation material complete all as specified and directed.

M&L for strip opening of unsv wall mounted fan 450mm sweep rewinding with super enameled copper winding wire of existing gauge and existing nos of turn with and including insulation material complete all as specified and directed.

M&L for strip opening of unsv Pedestal fan 450mm sweep rewinding with super enameled copper winding wire of existing gauge and existing nos of turn with and including insulation material complete all as specified and directed.

M&L painting of the ceiling fan of 1200/1400 mm sweep by using of spray gun in site with and including super enameled synthetic paint exiting tint and colour coding all as specified and directed.

M&L painting of the Exhaust fan of 230/300/380/450 mm sweep by using of spray gun in site with and including super enameled synthetic paint exiting tint and colour coding all as specified and directed.

S&F in replacement of capacitor 2.5 mfd AC 230 volts 50 Hz complete all as specified and directed.

S&F in replacement of capacitor 3.15 mfd AC 230 volts 50 Hz complete all as specified and directed.

M&L in repair of ball bearing suitable for ceiling fan, exhaust fan, wall mounted fan and pedestal fan any size and any make, complete all as specified and directed.

S&F in repair complete hanging clamp in all respect nuts, bolts,washer,spilit pin and rubber real, complete all as specified and directed.

S&F in repair down rod 300 mm long heavy duty suitable for 1200/1400 mm sweep ceiling fan, complete all as specified and directed.

S&F in repair sweep fan blade made of alluminium alloy duly air dynamic angle suitable for 1400 mm sweep ceiling fan ISI make, complete all as specified and directed.

Taking down water storage heater of capacity 25/35/50 ltr from the site and opening base plate assy and removing all sludge and scaling from the inner tank and refixing the the base plate assy with and including minor spares such rubber gasket, piece of wire etc, complete all as specified and directed.

S&F in repair heating element of 1500 watt 230 Volts, 50 HZ triangular in shape, complete all as specified and directed.

S&F in repair heating element of 2000 watt 230 Volts, 50 HZ triangular in shape, complete all as specified and directed.

S&F in repair heating element of 1500 watt 230 Volts, 50 HZ circular in shape, complete all as specified and directed.

S&F in repair heating element of 2000 watt 230 Volts, 50 HZ circular in shape, complete all as specified and directed.

S&F in repair thermostat switch 230 Volt 50 Hz adjustable range 0-90 degree celsius, complete all as specified and directed.

S&F in repair indicator lamp round and square in shape suitable for 25/35/50 ltr storage type water heater as per sample 230 volt, complete all as specified and directed.

S&F in repair flexible PVC connection pipe heavy duty suitable for hot water to bear the temperature 100 degree Celsius with out let and inlet connection brass adaptor and PVC washer having size 450 mm long 15 mm nominal dia complete all as specified and directed.

S&F in repair base plate assy complete suitable for 50 ltr storage type water heater with and including rubber seal, complete all as specified and directed.

S&F in repair inner tank assy made of copper suitable for 25 ltr storage type water heater with and including nuts, bolts and washer and fusible plug, complete all as specified and directed.

S&F in repair inner tank assy made of copper suitable for 35 ltr storage type water heater with and including nuts, bolts and washer and fusible plug, complete all as specified and directed.

S&F in repair inner tank assy made of copper suitable for 50 ltr storage type water heater with and including nuts, bolts and washer and fusible plug, complete all as specified and directed.

S&F in repair glass wool for insulation purpose in any make and any capacity storage type water heater complete all as specified and directed.

S&F in repair outer body including upper and lower cover and inspection plate made of MS sheet duly painted with super enameled synthetic paint over a coat of steel primer suitable for 25 Ltr storage type water heater, complete all as specified and directed.

S&F in repair outer body including upper and lower cover and inspection plate made of MS sheet duly painted with super enameled synthetic paint over a coat of steel primer suitable for 35 Ltr storage type water heater, complete all as specified and directed.

S&F in repair outer body including upper and lower cover and inspection plate made of MS sheet duly painted with super enameled synthetic paint over a coat of steel primer suitable for 50 Ltr storage type water heater, complete all as specified and directed.

S&F in repair three core cable 1100 volt grade having size 40/0.0076 copper conductor multi stranded, complete all as specified and directed.

Supply and fixing in repair modular one way switch 6 Amp 240 volts suitable for 1 module, complete all as specified and directed.

Supply and fixing in repair modular socket outlet, 6A/16A-2/3 pin combined 2 module, 230 volts complete all as specified & directed.

Supply and fixing in repair modular socket outlet, 6A-2/3 pin combined 2 module, 230 volts complete all as specified and directed.

Supply and fixing in repair modular one way switch 16A, 1 module single pole, 230 volts complete all as specified & directe.

S&F in repair recess mounting LED 2X2 fittings 36 W including provision of three core flexible copper conductor cable of suitable size from ceiling rose to connector, complete all as specified and directed.

Javeed And Co

M/S HAFIZ AND SONS

M/S Sheikh and Co

M/S AK ENTERPRISES

M/S Hilal Constructions

M/S STARE BUILDERS

M/S HAMID & CO