Work of Widening and strengthening of Badgoun to Jaroda Panda Marg (ODR). (Chainage 0.00 to 7.225)

Amount

Dimantling brick work or stone work in lime or cement mortar and including stacking of materials as directed be the Engineer-in-charge within a distance of 60 meter (200 feet).. SI. No. 692

Excavation for roadway in soil by mechanical means including cutting and transporting the earth to site of embankment /dumping area with lead upto 1000m including trimming bottom and side slopes, in accordance with requirements of lines, grades and cross sections. as per MoRTH specification clause No. 301complete excluding GST.

Construction of sub-grade and earthen shoulders with approved material obtained from borrow pits with all lifts & leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table No. 300-2 as per MoRTH specification clause No. 305 complete excluding GST.

Construction of embankment with approved materials deposited at site from roadway cutting and excavation from drain and foundation of other structures graded and compacted to meet requirement of table 300-2. as per MoRTH specification clause No. 505 complete excluding GST.

Construction of granular sub-base by providing grading -1 material in uniform layers with motor grader on prepared surface by mix in place method with rotavator at OMC, & compecting with vibratory roller to achieve the desired density, complete as per MoRTH specification clause No. 401 complete excluding GST.

Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver in sub- base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density (grade-I). as per MoRTH specification clause No. 406 complete excluding GST.

Providing & applying Primer coat with bitumen emulsion (SS-1 Type) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.60kg/Sqm. Using mechanical means. as per MoRTH specification clause No. 502 complete excluding GST.

Providing & applying Tack coat with V.G.-10 on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.25 kg/Sqm. On the prepared Bitumen/ granular surface clieaned with mecha-nical broom. as per MoRTH specification clause No. 503 complete excluding GST.

Providing and laying dense graded bituminous macadam (Grading 2) with higher capacity batch type HMP using crushed aggregates of specified grading, premixed with bituminous binder @ 4.5 per cent by weight of total mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoRTH specification clause No. 505(b) complete in all respects but excluding GST.

Providing & applying Tack coat with V.G.-10 on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.20 kg/Sqm. On the prepared Bitumen/ granular surface clieaned with mecha-nical broom. as per MoRTH specification clause No. 503 complete excluding GST.

Providing & laying Bituminious Concrete (Grading 2) with100-120TPH batch type hot mix plant producing an average output of 75 tonne per hour using crushed aggregates of specified grading, premix with bituminous binder @ 5.4 Per cent by weight of total mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, lever and alignment, rolling with smooth wheeled vibratory and tandom roller to achieve the desired compaction as per MORTH Specification clause 507 (b) Complete in all respects inculding all material. complete excluding GST.

Cement Concrete with 2 cm gauge approved stone grit, coarse sand & cement in the proportion of 6:3:1 including supply of all materials, labour, Tools & plants etc. required for proper completion of the work.SI . 279 (b)

M-150 Brick work in in 1:3 (One cement & Three coarse sand) mortar in foundation and plinth including supply of all materials labour, Tools & plants etc. required for proper completion of the work complete in all respects but excluding GST. (SI. No. 307

Struck pointing with cement mortar consisting of 1 part cement and 2 parts of fine sand of 1.25 Fineness modulus complete in all respects but excluding GST. (SI. No. 574)

12 mm thick plaster with cement and fine sand of 1.25 fineness modulus in 1:4 over brick work minimum thickness not to be less than 1 cm including supply of all materials, labour, tools & plants etc required for proper completion of the work complete in all respects but excluding GST. (SI. No.584)

2.5 cm thick Damp Proof Course with Cement and approved coarse sand 1:2 with and including water proofing compound (1 Ltr. to 1 bag of cement of 50 Kg.) as ordered by the Engineer incharge in the proportion as specified by the manufacturer including supply of all materials, labour, Tools & plants etc. required for proper completion of the work and including proper curing & shutterings as necessary complete in all respects but excluding GST. (SI No 361)

R.C.C. Work with cement, approved coarse sand & 2 cm gauge approved stone grit in proportions of 1:1.5:3 in slabs excluding supply of reinforcement and its bending, but including its fixing and binding the same with 24 B.W.G.G.I. binding wire and including necessary centering and shuttering etc. and supply of all materials, labour, Tools & plants etc. required for proper completion of the work including cost of binding wire. The rate excludes making of drip course which shall be paid extra complete in all respects but excluding GST (SI. No. 284a)

Plain/Reinforced Cement Concrete Grade M-25 in Open Foundation complete as per Drawing and Technical Specifications as per MoRTH specification clause No. 1500, 1700, 2100 but excluding GST.

Supplying, Fitting and Placing un-coated HYSD bar Reinforcement in Foundation complete as per Drawing and Technical Specifications as per MoRTH specification clause No. 1600 but excluding GST.

Providing and laying boulders apron on river bed for protection against scour with stone boulders weighing not less than 40 kg each complete as per drawing and Technical specification as per drawing, Technical and MoRTH specification clause No. 2503 but excluding GST

Providing and laying Filter material Graded stone aggregate of required size underneath pitching in slopes complete as per drawing, Technical and MoRTH specification clause No. 2504 but excluding GST

Providing and laying Pitching on slopes laid over prepared filter media including boulder apron laid dry in front of toe of embankment complete as per drawing, Technical and MoRTH specification clause No. 2504 but excluding GST

(a) Sand filling in plinth and under floor including supply of necessary quantity of sand from a distance not exceeding 8 Kms. from the site of work and including watering, dressing etc. labour and T&P etc. required for proper complition of the work. saplings of girth upto 30 cms. measured at a height of 1 M. above ground level and removal of rubbish upto a distance of 50 M. out side the periphery of area cleared. including cost of sand but excluding GST. S.I. No.255

M-150 Brick on edge pavement on parties with bricks, laid dry joints filled with local sand including preparation of base to proper slope, and its ramming, spreading layer of 1 cm. (3/8") depth of local sand over the subgrade and including supply of all materials, labour Tools &plants etc. required for proper completion of the work but excluding GST. S.I. No. 763

Providing and laying reinforcement cement concrete pipe NP-3 class bedding in single row 350mm dia Hume Pipe culvert including etc. as per MORTH Specification Complete in all respects but excluding GST

Providing and laying reinforcement cement concrete pipe NP-3 class bedding in single row 450mm dia Hume Pipe culvert including etc. as per MORTH Specification Complete in all respects but excluding GST.

Providing and laying reinforcement cement concrete pipe NP-3 class bedding in single row 600mm dia Hume Pipe culvert including etc. as per MORTH Specification Complete in all respects but excluding GST.

Providing and laying reinforcement cement concrete pipe NP-3 class bedding in single row 900mm dia Hume Pipe culvert including etc. as per MORTH Specification Complete in all respects but excluding GST.

Providing and laying reinforcement cement concrete pipe NP-3 class bedding in single row 1000mm dia Hume Pipe culvert including etc. as per MORTH Specification Complete in all respects but excluding GST.

Providing and laying reinforcement cement concrete pipe NP-3 class bedding in single row 1200mm dia Hume Pipe culvert including etc. as per MORTH Specification Complete in all respects but excluding GST.

Providing and laying of interlocking concrete Block pavement having thickness 100 mm as per drawings and technical specification Clause 1504. (Exclusive G.S.B.) but excluding GST. (SI no. ch. 20 new item 15)

M/S CHAUDHARY ASSOCIATES

Dev Yash Projects and Infrastructure Pvt. Ltd.