REPAIR, RECANNING AND POLISHING / PAINTING OF VARIOUS TYPES OF CHAIRS AND OTHER ITEMS AT SUNJUWAN, DAMANA AND MIRAN SAHIB UNDER GE JAMMU

Amount

M&L for taking down old unserviceable part from under mentioned repairable items of furniture and provn and fixing of new parts as specified in deg made out of teak wood duly seasoned free of knots. The new part will be French polished and matched with the original polish shade after making the surfaces smooth with putty / sand paper: -

Stool Dressing CB

Legs as per Drg No FD-27, 252, 282 complete all as specified and as directed.

Long rail as per Drg No FD-27, 252, 282 complete all as specified and as directed.

Short rail as per Drg No FD-27, 252, 282 complete all as specified and as directed.

Centre Stiffeners as per Drg No FD-27, 252, 282 complete all as specified and as directed.

Side Stiffener as per Drg No FD-27, 252, 282 complete all as specified and as directed.

Chair Dining

Rear leg as per Drg No FD-279, 16 (M), 203, 228, 1105 and FD/E6/MAP/10 complete all as specified and as directed.

Front legs as per Drg No FD-279, 16 (M), 203, 228, 1105 and FD/E6/MAP/10 complete all as specified and as directed.

Front rail as per Drg No FD-279, 16 (M), 203, 228, 1105 and FD/E6/MAP/10 complete all as specified and as directed.

Side rail as per Drg No FD-279, 16 (M), 203, 228, 1105 and FD/E6/MAP/10 complete all as specified and as directed.

Rear rail as per Drg No FD-279, 16 (M), 203, 228, 1105 and FD/E6/MAP/10 complete all as specified and as directed.

Back rest complete all as specified and as directed.

Side Stiffener complete all as specified and as directed.

Centre Stiffeners complete all as specified and as directed.

CHAIR DINING WITH CUSHION Teak wood through out, Seat foam shall be 75mm thick, 40 density fixed on 12mm thick commercial ply wood duly covered / upholstered with tapestry cloth of rate not less than Rs. 250/- mtr as approved by GE / Engr-in-Charge, Rest all as per Drg No FD/MAP-II/4 and FD/MAP/02 complete all as specified and as directed. Finish: - All exposed wooden surfaces shall be French polished in wall nut colour.

Seat foam shall be 75mm thick, 40 density fixed on 12mm thick commercial ply wood duly covered / upholstered with tapestry cloth of rate not less than Rs. 250/- per mtr complete all as specified and as directed.

Rear leg all as per Drg No FD/MAP-II/4 and FD/MAP/02 complete all as specified and as directed.

Front legs all as per Drg No FD/MAP-II/4 and FD/MAP/02 complete all as specified and as directed.

Front rail all as per Drg No FD/MAP-II/4 and FD/MAP/02 complete all as specified and as directed.

Side rail all as per Drg No FD/MAP-II/4 and FD/MAP/02 complete all as specified and as directed.

Rear rail all as per Drg No FD/MAP-II/4 and FD/MAP/02 complete all as specified and as directed.

Side Stiffeners complete all as specified and as directed.

Centre Stiffners complete all as specified and as directed.

CHAIR WRITING

Front leg all as per Drg No FD-280, 20, 259, 1107 complete all as specified and as directed.

Rear leg all as per Drg No FD-280, 20, 259, 1107 complete all as specified and as directed.

Side rail all as per Drg No FD-280, 20, 259, 1107 complete all as specified and as directed.

Front rail all as per Drg No FD-280, 20, 259, 1107 complete all as specified and as directed.

Rear rail all as per Drg No FD-280, 20, 259, 1107 complete all as specified and as directed.

Side Stiffener all as per Drg No FD-280, 20, 259, 1107 complete all as specified and as directed.

Centre Stiffener all as per Drg No FD-280, 20, 259, 1107 complete all as specified and as directed.

Arms all as per Drg No FD-280, 20, 259, 1107 complete all as specified and as directed.

Back rest all as per Drg No FD-280, 20, 259, 1107 complete all as specified and as directed.

CHAIR EASY

Front leg all as per Drg No FD-229, 17 complete all as specified and as directed.

Rear leg all as per Drg No FD-229, 17 complete all as specified and as directed.

Side rail of seat frame all as per Drg No FD-229, 17 complete all as specified and as directed.

Front rail of seat frame all as per Drg No FD-229, 17 complete all as specified and as directed.

Back rail of seat frame all as per Drg No FD-229, 17 complete all as specified and as directed.

Side rail of back frame all as per Drg No FD-229, 17 complete all as specified and as directed.

Top rail of back frame all as per Drg No FD-229, 17 complete all as specified and as directed.

Bottom rail of back frame all as per Drg No FD-229, 17 complete all as specified and as directed.

Arms all as per Drg No FD-229, 17 complete all as specified and as directed.

CHAIR WOODEN BOTTOM

Front leg all as per Drg No FD-56, 285 complete all as specified and as directed.

Rear leg all as per Drg No FD-56, 285 complete all as specified and as directed.

Side rail all as per Drg No FD-56, 285 complete all as specified and as directed.

Front rail all as per Drg No FD-56, 285 complete all as specified and as directed.

Back rail all as per Drg No FD-56, 285 complete all as specified and as directed.

Back rest all as per Drg No FD-56, 285 complete all as specified and as directed.

Side Stiffener all as per Drg No FD-56, 285 complete all as specified and as directed.

Centre Stiffener all as per Drg No FD-56, 285 complete all as specified and as directed.

Seat of plywood 6mm thick commercial quality BWR type duly perforated fixed with steel screw all as per Drg No FD-56, 285 complete all as specified and as directed and shown on drg.

CHAIR CBA SPECIAL STEEL WITH HAND REST

Removing existing unserviceable seat and S&F new seat made out of seasoned teak wood duly canned all as per Drg No FD-120 complete all as specified and as directed.

Removing existing unserviceable back and S&F new back made out of seasoned teak wood duly canned all as per Drg No FD-120 complete all as specified and as directed.

Removing existing U/S shoe and S&F new rubber shoes complete all as specified and as directed.

Removing existing U/S hand board and S&F new hand board made out of pre laminated particle board 18mm thick exterior grade all as per Drg No FD-120 complete all as specified and as directed.

Welding of broken joints / parts where ever required complete all as specified and as directed.

Painting to steel surface with two coats of synthetic enamel black paint complete all as specified and as directed.

CHAIR CB STEEL WITHOUT ARMS

Removing existing unserviceable seat frame and S&F new seat frame made out of shesham wood duly canned as specified and shown in Drg No FD-75. Wooden portion shall be polished black.

Removing existing unserviceable back frame and S&F new back frame made out of shesham wood duly canned as specified and shown in Drg No FD-75. Wooden portion shall be polished black.

Painting of chair with one coat of OG paint after smoothing / preparation of surface with putty / red oxide complete all as specified and as directed.

New provn of flat iron 25 X 3mm duly welded at ends with frame bar at seat / back of chair complete all as specified and as directed. (For chair CB Steel with arm and without arm).

Rubber shoes all as per Drg No FD-75 complete all as specified and as directed.

CHAIR CB STEEL WITH ARMS

Removing existing unserviceable seat frame and S&F of new seat frame made out of shesham wood duly canned as specified and shown in Drg No FD-75 (M). Wooden portion shall be polished black.

Removing existing unserviceable back frame and S&F of new back frame made out of shesham wood duly canned as specified and shown in Drg No FD-75 (M). Wooden portion shall be polished black.

Removing existing unserviceable arm rest and S&F of new arm rest of hard wood duly black polished as per Drg No FD-75 (M) complete all as specified and as directed.

Painting of chair with one coat of OG paint after smoothing / preparation of surface with putty / red oxide complete all as specified and as directed.

Rubber shoes all as per Drg No FD-75 (M) complete all as specified and as directed.

CHAIR EASY CUSHIONED STEEL / WOODEN

Seat upholstering by providing 2" thick foam and best quality rexine, 12mm thick plywood commercial to be provided at the base as per Drg No FD-121, 358 complete all as specified and as directed.

Back upholstering by providing 2" thick foam and best quality rexine, 9mm thick plywood commercial to be provided at the base as per Drg No FD-121, 358 complete all as specified and as directed.

REPAIR OF SOFA SET 5 SEATER (20 SET) M&L for removing old unserviceable / worn out cushion and tapestry cloth from sofa set 5 seater (Set consisting of 10 pieces of cushion) and supply of new cushion of size 21" X 22" X 4" thick foam with 40 density as approved by GE and cushion covered with tapestry cloth of approved shade and quality over a cover of lining cloth duly covered and stretched over the cushions complete all as specified and as directed by Engr-in-Charge. Note: - Cost of the tapestry cloth incorporated in the work shall be of not less than Rs. 250/- per mtr.

Cushion for seat and back size 21" X 22" X 4" thick complete all as specified and as directed.

Front legs made out of teak wood complete all as specified and as directed.

Rear legs made out of teak wood complete all as specified and as directed.

Arms made out of teak wood complete all as specified and as directed.

Bottom short rail / Stiffeners made out of teak wood of size all as shown on drg No FD-281, 258, 373, 18/234, 1113 complete all as specified and as directed.

Wooden long rail bottom made out of teak wood as shown on drg No FD-281, 258, 373, 18/234, 1113 complete all as specified and as directed.

PVC shoes complete all as specified and as directed.

SOFA SET 4 SEATS (25 SET) M&L for removing old unserviceable / worn out cushion and tapestry cloth from sofa set 4 seater (Set consisting of 8 pieces of cushion) and supply of new cushion of size 21" X 22" X 4" thick foam with 40 density as approved by GE and cushion covered with tapestry cloth of approved shade and quality over a cover of lining cloth duly covered and stretched over the cushions complete all as specified and as directed by Engr-in-Charge. Note: - Cost of the tapestry cloth incorporated in the work shall be of not less than Rs. 250/- per mtr.

Cushion for seat and back size 21" X 22" X 4" thick complete all as specified and as directed.

Front legs made out of teak wood complete all as specified and as directed.

Rear legs made out of teak wood complete all as specified and as directed.

Arms made out of teak wood complete all as specified and as directed.

Bottom short rail / Stiffeners made out of teak wood of size all as shown on drg No FD-258, 281, 373, 1113 complete all as specified and as directed.

Long rail bottom made out of teak wood all as shown on drg No FD-258, 281, 373, 1113 complete all as specified and as directed.

PVC shoes complete all as specified and as directed.

Preparation of wooden surfaces by rubbing with sand paper and apply one coat of French polish on the following wooden furniture: -

Sofa Set 5 seater all as shown on drg No FD-281, 258, 373, 18/23 complete all as specified and as directed.

Sofa Set 4 seater all as shown on drg No FD-258, 281, 373, 1113 complete all as specified and as directed.

Chair Dining, Chair Dining Cushion all as shown on drg No FD-16, 279, 228, 1105, FD/MAP-II/4 complete all as specified and as directed.

Chair Easy all as shown on drg No FD-17, 229, 1108 complete all as specified and as directed.

Chair writing all as shown on drg No FD-280, 20, 259, 1107 complete all as specified and as directed.

Stool dressing CB all as shown on drg No FD-27, 252 complete all as specified and as directed.

Chair WB all as shown on drg No FD-56, 285 complete all as specified and as directed.

Bin soiled linen all as shown on drg No FD-15, 244 complete all as specified and as directed.

CHAIR VERANDHA

Scrapping chair verandha frame with emery paper making smooth surface and painted with one coat of white enamelled paint 1st quality complete all as specified and as directed.

Removing of all unserviceable conduit pipe and S&F of new MS conduit pipe of 20mm, 16 gauge including cutting, welding, fixing where ever required complete all as specified and as directed.

Gas welding to chair verandha where required and drilling properly at places of welding point. Gas welding shall be done all round the conduit pipe and all welding and filling at one broken point shall be measured as one point.

Replacement of PVC rubber shoes to the legs of chair verandha complete all as specified and as directed.

Removing of old unserviceable plastic cane from chair verandha and reweaving of chair verandha with white plastic cane 1/2 round 4mm wide 0.40mm thick with approved quality weight not less than 0.50 Kg per chair closely woven complete all as specified and as directed.

Recanning of following furniture items with 1/2 round 2.0mm wide 0.40mm thick woven and border round and back with 4.0mm wide plastic cane of approved quality (white cream in colour) including removing of old canning: -

Chair dining as shown on Drg No FD-16, 279 complete all as specified and as directed.

Chair writing all as shown on drg No FD-280, 259, 1107 complete all as specified and as directed.

Chair easy all as shown on drg No FD-229, 17 complete all as specified and as directed.

Stool dressing all as shown on drg No FD-27, 252 complete all as specified and as directed.

Bin soiled linen all as shown on drg No FD-244, 1104 and 212 complete all as specified and as directed.

Notes: - (i) Sample of wood, cane, polish, varnish, cushion, cloth and all fitments etc shall be as approved by GE as per sample approved in sample room of GE Office. (ii) Painting and polishing shall be done by spray machine only. (iii) No. of minimum labours on daily basis should be deployed by the Contractor as given below: - (a) Canning - 05 No's (b) Painting - 02 No's (c) Repair - 02 No's (d) Carpenter - 02 No's (iv) No T&P will be issued by the department to the labours. It shall be the responsibility of the Contractor to provide T&P and adequate uniform to the Labours.

L.BHIMSEN

Allied International

Bidder Name

M/S NEW SUBBERWAL FURNISHERS

L.BHIMSEN

Allied International